+ item.spec = &ipv6;
+ item.mask = &ipv6_mask;
+ return flow_dv_convert_modify_action(&item, modify_ipv6, NULL, resource,
+ MLX5_MODIFICATION_TYPE_SET, error);
+}
+
+/**
+ * Convert modify-header set MAC address action to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_mac
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_set_mac *conf =
+ (const struct rte_flow_action_set_mac *)(action->conf);
+ struct rte_flow_item item = { .type = RTE_FLOW_ITEM_TYPE_ETH };
+ struct rte_flow_item_eth eth;
+ struct rte_flow_item_eth eth_mask;
+
+ memset(ð, 0, sizeof(eth));
+ memset(ð_mask, 0, sizeof(eth_mask));
+ if (action->type == RTE_FLOW_ACTION_TYPE_SET_MAC_SRC) {
+ memcpy(ð.src.addr_bytes, &conf->mac_addr,
+ sizeof(eth.src.addr_bytes));
+ memcpy(ð_mask.src.addr_bytes,
+ &rte_flow_item_eth_mask.src.addr_bytes,
+ sizeof(eth_mask.src.addr_bytes));
+ } else {
+ memcpy(ð.dst.addr_bytes, &conf->mac_addr,
+ sizeof(eth.dst.addr_bytes));
+ memcpy(ð_mask.dst.addr_bytes,
+ &rte_flow_item_eth_mask.dst.addr_bytes,
+ sizeof(eth_mask.dst.addr_bytes));
+ }
+ item.spec = ð
+ item.mask = ð_mask;
+ return flow_dv_convert_modify_action(&item, modify_eth, NULL, resource,
+ MLX5_MODIFICATION_TYPE_SET, error);
+}
+
+/**
+ * Convert modify-header set VLAN VID action to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_vlan_vid
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_of_set_vlan_vid *conf =
+ (const struct rte_flow_action_of_set_vlan_vid *)(action->conf);
+ int i = resource->actions_num;
+ struct mlx5_modification_cmd *actions = &resource->actions[i];
+ struct field_modify_info *field = modify_vlan_out_first_vid;
+
+ if (i >= MLX5_MAX_MODIFY_NUM)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "too many items to modify");
+ actions[i].action_type = MLX5_MODIFICATION_TYPE_SET;
+ actions[i].field = field->id;
+ actions[i].length = field->size;
+ actions[i].offset = field->offset;
+ actions[i].data0 = rte_cpu_to_be_32(actions[i].data0);
+ actions[i].data1 = conf->vlan_vid;
+ actions[i].data1 = actions[i].data1 << 16;
+ resource->actions_num = ++i;
+ return 0;
+}
+
+/**
+ * Convert modify-header set TP action to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[in] items
+ * Pointer to rte_flow_item objects list.
+ * @param[in] attr
+ * Pointer to flow attributes structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_tp
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ const struct rte_flow_item *items,
+ union flow_dv_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_set_tp *conf =
+ (const struct rte_flow_action_set_tp *)(action->conf);
+ struct rte_flow_item item;
+ struct rte_flow_item_udp udp;
+ struct rte_flow_item_udp udp_mask;
+ struct rte_flow_item_tcp tcp;
+ struct rte_flow_item_tcp tcp_mask;
+ struct field_modify_info *field;
+
+ if (!attr->valid)
+ flow_dv_attr_init(items, attr);
+ if (attr->udp) {
+ memset(&udp, 0, sizeof(udp));
+ memset(&udp_mask, 0, sizeof(udp_mask));
+ if (action->type == RTE_FLOW_ACTION_TYPE_SET_TP_SRC) {
+ udp.hdr.src_port = conf->port;
+ udp_mask.hdr.src_port =
+ rte_flow_item_udp_mask.hdr.src_port;
+ } else {
+ udp.hdr.dst_port = conf->port;
+ udp_mask.hdr.dst_port =
+ rte_flow_item_udp_mask.hdr.dst_port;
+ }
+ item.type = RTE_FLOW_ITEM_TYPE_UDP;
+ item.spec = &udp;
+ item.mask = &udp_mask;
+ field = modify_udp;
+ }
+ if (attr->tcp) {
+ memset(&tcp, 0, sizeof(tcp));
+ memset(&tcp_mask, 0, sizeof(tcp_mask));
+ if (action->type == RTE_FLOW_ACTION_TYPE_SET_TP_SRC) {
+ tcp.hdr.src_port = conf->port;
+ tcp_mask.hdr.src_port =
+ rte_flow_item_tcp_mask.hdr.src_port;
+ } else {
+ tcp.hdr.dst_port = conf->port;
+ tcp_mask.hdr.dst_port =
+ rte_flow_item_tcp_mask.hdr.dst_port;
+ }
+ item.type = RTE_FLOW_ITEM_TYPE_TCP;
+ item.spec = &tcp;
+ item.mask = &tcp_mask;
+ field = modify_tcp;
+ }
+ return flow_dv_convert_modify_action(&item, field, NULL, resource,
+ MLX5_MODIFICATION_TYPE_SET, error);
+}
+
+/**
+ * Convert modify-header set TTL action to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[in] items
+ * Pointer to rte_flow_item objects list.
+ * @param[in] attr
+ * Pointer to flow attributes structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_ttl
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ const struct rte_flow_item *items,
+ union flow_dv_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_set_ttl *conf =
+ (const struct rte_flow_action_set_ttl *)(action->conf);
+ struct rte_flow_item item;
+ struct rte_flow_item_ipv4 ipv4;
+ struct rte_flow_item_ipv4 ipv4_mask;
+ struct rte_flow_item_ipv6 ipv6;
+ struct rte_flow_item_ipv6 ipv6_mask;
+ struct field_modify_info *field;
+
+ if (!attr->valid)
+ flow_dv_attr_init(items, attr);
+ if (attr->ipv4) {
+ memset(&ipv4, 0, sizeof(ipv4));
+ memset(&ipv4_mask, 0, sizeof(ipv4_mask));
+ ipv4.hdr.time_to_live = conf->ttl_value;
+ ipv4_mask.hdr.time_to_live = 0xFF;
+ item.type = RTE_FLOW_ITEM_TYPE_IPV4;
+ item.spec = &ipv4;
+ item.mask = &ipv4_mask;
+ field = modify_ipv4;
+ }
+ if (attr->ipv6) {
+ memset(&ipv6, 0, sizeof(ipv6));
+ memset(&ipv6_mask, 0, sizeof(ipv6_mask));
+ ipv6.hdr.hop_limits = conf->ttl_value;
+ ipv6_mask.hdr.hop_limits = 0xFF;
+ item.type = RTE_FLOW_ITEM_TYPE_IPV6;
+ item.spec = &ipv6;
+ item.mask = &ipv6_mask;
+ field = modify_ipv6;
+ }
+ return flow_dv_convert_modify_action(&item, field, NULL, resource,
+ MLX5_MODIFICATION_TYPE_SET, error);
+}
+
+/**
+ * Convert modify-header decrement TTL action to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[in] items
+ * Pointer to rte_flow_item objects list.
+ * @param[in] attr
+ * Pointer to flow attributes structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_dec_ttl
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_item *items,
+ union flow_dv_attr *attr,
+ struct rte_flow_error *error)
+{
+ struct rte_flow_item item;
+ struct rte_flow_item_ipv4 ipv4;
+ struct rte_flow_item_ipv4 ipv4_mask;
+ struct rte_flow_item_ipv6 ipv6;
+ struct rte_flow_item_ipv6 ipv6_mask;
+ struct field_modify_info *field;
+
+ if (!attr->valid)
+ flow_dv_attr_init(items, attr);
+ if (attr->ipv4) {
+ memset(&ipv4, 0, sizeof(ipv4));
+ memset(&ipv4_mask, 0, sizeof(ipv4_mask));
+ ipv4.hdr.time_to_live = 0xFF;
+ ipv4_mask.hdr.time_to_live = 0xFF;
+ item.type = RTE_FLOW_ITEM_TYPE_IPV4;
+ item.spec = &ipv4;
+ item.mask = &ipv4_mask;
+ field = modify_ipv4;
+ }
+ if (attr->ipv6) {
+ memset(&ipv6, 0, sizeof(ipv6));
+ memset(&ipv6_mask, 0, sizeof(ipv6_mask));
+ ipv6.hdr.hop_limits = 0xFF;
+ ipv6_mask.hdr.hop_limits = 0xFF;
+ item.type = RTE_FLOW_ITEM_TYPE_IPV6;
+ item.spec = &ipv6;
+ item.mask = &ipv6_mask;
+ field = modify_ipv6;
+ }
+ return flow_dv_convert_modify_action(&item, field, NULL, resource,
+ MLX5_MODIFICATION_TYPE_ADD, error);
+}
+
+/**
+ * Convert modify-header increment/decrement TCP Sequence number
+ * to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_tcp_seq
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ const rte_be32_t *conf = (const rte_be32_t *)(action->conf);
+ uint64_t value = rte_be_to_cpu_32(*conf);
+ struct rte_flow_item item;
+ struct rte_flow_item_tcp tcp;
+ struct rte_flow_item_tcp tcp_mask;
+
+ memset(&tcp, 0, sizeof(tcp));
+ memset(&tcp_mask, 0, sizeof(tcp_mask));
+ if (action->type == RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ)
+ /*
+ * The HW has no decrement operation, only increment operation.
+ * To simulate decrement X from Y using increment operation
+ * we need to add UINT32_MAX X times to Y.
+ * Each adding of UINT32_MAX decrements Y by 1.
+ */
+ value *= UINT32_MAX;
+ tcp.hdr.sent_seq = rte_cpu_to_be_32((uint32_t)value);
+ tcp_mask.hdr.sent_seq = RTE_BE32(UINT32_MAX);
+ item.type = RTE_FLOW_ITEM_TYPE_TCP;
+ item.spec = &tcp;
+ item.mask = &tcp_mask;
+ return flow_dv_convert_modify_action(&item, modify_tcp, NULL, resource,
+ MLX5_MODIFICATION_TYPE_ADD, error);
+}
+
+/**
+ * Convert modify-header increment/decrement TCP Acknowledgment number
+ * to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_tcp_ack
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ const rte_be32_t *conf = (const rte_be32_t *)(action->conf);
+ uint64_t value = rte_be_to_cpu_32(*conf);
+ struct rte_flow_item item;
+ struct rte_flow_item_tcp tcp;
+ struct rte_flow_item_tcp tcp_mask;
+
+ memset(&tcp, 0, sizeof(tcp));
+ memset(&tcp_mask, 0, sizeof(tcp_mask));
+ if (action->type == RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK)
+ /*
+ * The HW has no decrement operation, only increment operation.
+ * To simulate decrement X from Y using increment operation
+ * we need to add UINT32_MAX X times to Y.
+ * Each adding of UINT32_MAX decrements Y by 1.
+ */
+ value *= UINT32_MAX;
+ tcp.hdr.recv_ack = rte_cpu_to_be_32((uint32_t)value);
+ tcp_mask.hdr.recv_ack = RTE_BE32(UINT32_MAX);
+ item.type = RTE_FLOW_ITEM_TYPE_TCP;
+ item.spec = &tcp;
+ item.mask = &tcp_mask;
+ return flow_dv_convert_modify_action(&item, modify_tcp, NULL, resource,
+ MLX5_MODIFICATION_TYPE_ADD, error);
+}
+
+static enum mlx5_modification_field reg_to_field[] = {
+ [REG_NONE] = MLX5_MODI_OUT_NONE,
+ [REG_A] = MLX5_MODI_META_DATA_REG_A,
+ [REG_B] = MLX5_MODI_META_DATA_REG_B,
+ [REG_C_0] = MLX5_MODI_META_REG_C_0,
+ [REG_C_1] = MLX5_MODI_META_REG_C_1,
+ [REG_C_2] = MLX5_MODI_META_REG_C_2,
+ [REG_C_3] = MLX5_MODI_META_REG_C_3,
+ [REG_C_4] = MLX5_MODI_META_REG_C_4,
+ [REG_C_5] = MLX5_MODI_META_REG_C_5,
+ [REG_C_6] = MLX5_MODI_META_REG_C_6,
+ [REG_C_7] = MLX5_MODI_META_REG_C_7,
+};
+
+/**
+ * Convert register set to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_set_reg
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ const struct mlx5_rte_flow_action_set_tag *conf = action->conf;
+ struct mlx5_modification_cmd *actions = resource->actions;
+ uint32_t i = resource->actions_num;
+
+ if (i >= MLX5_MAX_MODIFY_NUM)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "too many items to modify");
+ assert(conf->id != REG_NONE);
+ assert(conf->id < RTE_DIM(reg_to_field));
+ actions[i].action_type = MLX5_MODIFICATION_TYPE_SET;
+ actions[i].field = reg_to_field[conf->id];
+ actions[i].data0 = rte_cpu_to_be_32(actions[i].data0);
+ actions[i].data1 = rte_cpu_to_be_32(conf->data);
+ ++i;
+ resource->actions_num = i;
+ return 0;
+}
+
+/**
+ * Convert SET_TAG action to DV specification.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] conf
+ * Pointer to action specification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_set_tag
+ (struct rte_eth_dev *dev,
+ struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action_set_tag *conf,
+ struct rte_flow_error *error)
+{
+ rte_be32_t data = rte_cpu_to_be_32(conf->data);
+ rte_be32_t mask = rte_cpu_to_be_32(conf->mask);
+ struct rte_flow_item item = {
+ .spec = &data,
+ .mask = &mask,
+ };
+ struct field_modify_info reg_c_x[] = {
+ [1] = {0, 0, 0},
+ };
+ enum mlx5_modification_field reg_type;
+ int ret;
+
+ ret = mlx5_flow_get_reg_id(dev, MLX5_APP_TAG, conf->index, error);
+ if (ret < 0)
+ return ret;
+ assert(ret != REG_NONE);
+ assert((unsigned int)ret < RTE_DIM(reg_to_field));
+ reg_type = reg_to_field[ret];
+ assert(reg_type > 0);
+ reg_c_x[0] = (struct field_modify_info){4, 0, reg_type};
+ return flow_dv_convert_modify_action(&item, reg_c_x, NULL, resource,
+ MLX5_MODIFICATION_TYPE_SET, error);
+}
+
+/**
+ * Convert internal COPY_REG action to DV specification.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in,out] res
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_copy_mreg(struct rte_eth_dev *dev,
+ struct mlx5_flow_dv_modify_hdr_resource *res,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ const struct mlx5_flow_action_copy_mreg *conf = action->conf;
+ rte_be32_t mask = RTE_BE32(UINT32_MAX);
+ struct rte_flow_item item = {
+ .spec = NULL,
+ .mask = &mask,
+ };
+ struct field_modify_info reg_src[] = {
+ {4, 0, reg_to_field[conf->src]},
+ {0, 0, 0},
+ };
+ struct field_modify_info reg_dst = {
+ .offset = 0,
+ .id = reg_to_field[conf->dst],
+ };
+ /* Adjust reg_c[0] usage according to reported mask. */
+ if (conf->dst == REG_C_0 || conf->src == REG_C_0) {
+ struct mlx5_priv *priv = dev->data->dev_private;
+ uint32_t reg_c0 = priv->sh->dv_regc0_mask;
+
+ assert(reg_c0);
+ assert(priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY);
+ if (conf->dst == REG_C_0) {
+ /* Copy to reg_c[0], within mask only. */
+ reg_dst.offset = rte_bsf32(reg_c0);
+ /*
+ * Mask is ignoring the enianness, because
+ * there is no conversion in datapath.
+ */
+#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+ /* Copy from destination lower bits to reg_c[0]. */
+ mask = reg_c0 >> reg_dst.offset;
+#else
+ /* Copy from destination upper bits to reg_c[0]. */
+ mask = reg_c0 << (sizeof(reg_c0) * CHAR_BIT -
+ rte_fls_u32(reg_c0));
+#endif
+ } else {
+ mask = rte_cpu_to_be_32(reg_c0);
+#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+ /* Copy from reg_c[0] to destination lower bits. */
+ reg_dst.offset = 0;
+#else
+ /* Copy from reg_c[0] to destination upper bits. */
+ reg_dst.offset = sizeof(reg_c0) * CHAR_BIT -
+ (rte_fls_u32(reg_c0) -
+ rte_bsf32(reg_c0));
+#endif
+ }
+ }
+ return flow_dv_convert_modify_action(&item,
+ reg_src, ®_dst, res,
+ MLX5_MODIFICATION_TYPE_COPY,
+ error);
+}
+
+/**
+ * Convert MARK action to DV specification. This routine is used
+ * in extensive metadata only and requires metadata register to be
+ * handled. In legacy mode hardware tag resource is engaged.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] conf
+ * Pointer to MARK action specification.
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_mark(struct rte_eth_dev *dev,
+ const struct rte_flow_action_mark *conf,
+ struct mlx5_flow_dv_modify_hdr_resource *resource,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ rte_be32_t mask = rte_cpu_to_be_32(MLX5_FLOW_MARK_MASK &
+ priv->sh->dv_mark_mask);
+ rte_be32_t data = rte_cpu_to_be_32(conf->id) & mask;
+ struct rte_flow_item item = {
+ .spec = &data,
+ .mask = &mask,
+ };
+ struct field_modify_info reg_c_x[] = {
+ {4, 0, 0}, /* dynamic instead of MLX5_MODI_META_REG_C_1. */
+ {0, 0, 0},
+ };
+ int reg;
+
+ if (!mask)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ NULL, "zero mark action mask");
+ reg = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK, 0, error);
+ if (reg < 0)
+ return reg;
+ assert(reg > 0);
+ if (reg == REG_C_0) {
+ uint32_t msk_c0 = priv->sh->dv_regc0_mask;
+ uint32_t shl_c0 = rte_bsf32(msk_c0);
+
+ data = rte_cpu_to_be_32(rte_cpu_to_be_32(data) << shl_c0);
+ mask = rte_cpu_to_be_32(mask) & msk_c0;
+ mask = rte_cpu_to_be_32(mask << shl_c0);
+ }
+ reg_c_x[0].id = reg_to_field[reg];
+ return flow_dv_convert_modify_action(&item, reg_c_x, NULL, resource,
+ MLX5_MODIFICATION_TYPE_SET, error);
+}
+
+/**
+ * Get metadata register index for specified steering domain.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] attr
+ * Attributes of flow to determine steering domain.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * positive index on success, a negative errno value otherwise
+ * and rte_errno is set.
+ */
+static enum modify_reg
+flow_dv_get_metadata_reg(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ int reg =
+ mlx5_flow_get_reg_id(dev, attr->transfer ?
+ MLX5_METADATA_FDB :
+ attr->egress ?
+ MLX5_METADATA_TX :
+ MLX5_METADATA_RX, 0, error);
+ if (reg < 0)
+ return rte_flow_error_set(error,
+ ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL, "unavailable "
+ "metadata register");
+ return reg;
+}
+
+/**
+ * Convert SET_META action to DV specification.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] attr
+ * Attributes of flow that includes this item.
+ * @param[in] conf
+ * Pointer to action specification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_set_meta
+ (struct rte_eth_dev *dev,
+ struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_action_set_meta *conf,
+ struct rte_flow_error *error)
+{
+ uint32_t data = conf->data;
+ uint32_t mask = conf->mask;
+ struct rte_flow_item item = {
+ .spec = &data,
+ .mask = &mask,
+ };
+ struct field_modify_info reg_c_x[] = {
+ [1] = {0, 0, 0},
+ };
+ int reg = flow_dv_get_metadata_reg(dev, attr, error);
+
+ if (reg < 0)
+ return reg;
+ /*
+ * In datapath code there is no endianness
+ * coversions for perfromance reasons, all
+ * pattern conversions are done in rte_flow.
+ */
+ if (reg == REG_C_0) {
+ struct mlx5_priv *priv = dev->data->dev_private;
+ uint32_t msk_c0 = priv->sh->dv_regc0_mask;
+ uint32_t shl_c0;
+
+ assert(msk_c0);
+#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+ shl_c0 = rte_bsf32(msk_c0);
+#else
+ shl_c0 = sizeof(msk_c0) * CHAR_BIT - rte_fls_u32(msk_c0);
+#endif
+ mask <<= shl_c0;
+ data <<= shl_c0;
+ assert(!(~msk_c0 & rte_cpu_to_be_32(mask)));
+ }
+ reg_c_x[0] = (struct field_modify_info){4, 0, reg_to_field[reg]};
+ /* The routine expects parameters in memory as big-endian ones. */
+ return flow_dv_convert_modify_action(&item, reg_c_x, NULL, resource,
+ MLX5_MODIFICATION_TYPE_SET, error);
+}
+
+/**
+ * Convert modify-header set IPv4 DSCP action to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_ipv4_dscp
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_set_dscp *conf =
+ (const struct rte_flow_action_set_dscp *)(action->conf);
+ struct rte_flow_item item = { .type = RTE_FLOW_ITEM_TYPE_IPV4 };
+ struct rte_flow_item_ipv4 ipv4;
+ struct rte_flow_item_ipv4 ipv4_mask;
+
+ memset(&ipv4, 0, sizeof(ipv4));
+ memset(&ipv4_mask, 0, sizeof(ipv4_mask));
+ ipv4.hdr.type_of_service = conf->dscp;
+ ipv4_mask.hdr.type_of_service = RTE_IPV4_HDR_DSCP_MASK >> 2;
+ item.spec = &ipv4;
+ item.mask = &ipv4_mask;
+ return flow_dv_convert_modify_action(&item, modify_ipv4, NULL, resource,
+ MLX5_MODIFICATION_TYPE_SET, error);
+}
+
+/**
+ * Convert modify-header set IPv6 DSCP action to DV specification.
+ *
+ * @param[in,out] resource
+ * Pointer to the modify-header resource.
+ * @param[in] action
+ * Pointer to action specification.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_action_modify_ipv6_dscp
+ (struct mlx5_flow_dv_modify_hdr_resource *resource,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_set_dscp *conf =
+ (const struct rte_flow_action_set_dscp *)(action->conf);
+ struct rte_flow_item item = { .type = RTE_FLOW_ITEM_TYPE_IPV6 };
+ struct rte_flow_item_ipv6 ipv6;
+ struct rte_flow_item_ipv6 ipv6_mask;
+
+ memset(&ipv6, 0, sizeof(ipv6));
+ memset(&ipv6_mask, 0, sizeof(ipv6_mask));
+ /*
+ * Even though the DSCP bits offset of IPv6 is not byte aligned,
+ * rdma-core only accept the DSCP bits byte aligned start from
+ * bit 0 to 5 as to be compatible with IPv4. No need to shift the
+ * bits in IPv6 case as rdma-core requires byte aligned value.
+ */
+ ipv6.hdr.vtc_flow = conf->dscp;
+ ipv6_mask.hdr.vtc_flow = RTE_IPV6_HDR_DSCP_MASK >> 22;
+ item.spec = &ipv6;
+ item.mask = &ipv6_mask;
+ return flow_dv_convert_modify_action(&item, modify_ipv6, NULL, resource,
+ MLX5_MODIFICATION_TYPE_SET, error);
+}
+
+/**
+ * Validate MARK item.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] item
+ * Item specification.
+ * @param[in] attr
+ * Attributes of flow that includes this item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_item_mark(struct rte_eth_dev *dev,
+ const struct rte_flow_item *item,
+ const struct rte_flow_attr *attr __rte_unused,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_config *config = &priv->config;
+ const struct rte_flow_item_mark *spec = item->spec;
+ const struct rte_flow_item_mark *mask = item->mask;
+ const struct rte_flow_item_mark nic_mask = {
+ .id = priv->sh->dv_mark_mask,
+ };
+ int ret;
+
+ if (config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "extended metadata feature"
+ " isn't enabled");
+ if (!mlx5_flow_ext_mreg_supported(dev))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "extended metadata register"
+ " isn't supported");
+ if (!nic_mask.id)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "extended metadata register"
+ " isn't available");
+ ret = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK, 0, error);
+ if (ret < 0)
+ return ret;
+ if (!spec)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item->spec,
+ "data cannot be empty");
+ if (spec->id >= (MLX5_FLOW_MARK_MAX & nic_mask.id))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &spec->id,
+ "mark id exceeds the limit");
+ if (!mask)
+ mask = &nic_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_mark),
+ error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Validate META item.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] item
+ * Item specification.
+ * @param[in] attr
+ * Attributes of flow that includes this item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_item_meta(struct rte_eth_dev *dev __rte_unused,
+ const struct rte_flow_item *item,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_config *config = &priv->config;
+ const struct rte_flow_item_meta *spec = item->spec;
+ const struct rte_flow_item_meta *mask = item->mask;
+ struct rte_flow_item_meta nic_mask = {
+ .data = UINT32_MAX
+ };
+ int reg;
+ int ret;
+
+ if (!spec)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item->spec,
+ "data cannot be empty");
+ if (!spec->data)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC, NULL,
+ "data cannot be zero");
+ if (config->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
+ if (!mlx5_flow_ext_mreg_supported(dev))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "extended metadata register"
+ " isn't supported");
+ reg = flow_dv_get_metadata_reg(dev, attr, error);
+ if (reg < 0)
+ return reg;
+ if (reg == REG_B)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "match on reg_b "
+ "isn't supported");
+ if (reg != REG_A)
+ nic_mask.data = priv->sh->dv_meta_mask;
+ }
+ if (!mask)
+ mask = &rte_flow_item_meta_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_meta),
+ error);
+ return ret;
+}
+
+/**
+ * Validate TAG item.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] item
+ * Item specification.
+ * @param[in] attr
+ * Attributes of flow that includes this item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_item_tag(struct rte_eth_dev *dev,
+ const struct rte_flow_item *item,
+ const struct rte_flow_attr *attr __rte_unused,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_tag *spec = item->spec;
+ const struct rte_flow_item_tag *mask = item->mask;
+ const struct rte_flow_item_tag nic_mask = {
+ .data = RTE_BE32(UINT32_MAX),
+ .index = 0xff,
+ };
+ int ret;
+
+ if (!mlx5_flow_ext_mreg_supported(dev))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "extensive metadata register"
+ " isn't supported");
+ if (!spec)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item->spec,
+ "data cannot be empty");
+ if (!mask)
+ mask = &rte_flow_item_tag_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_tag),
+ error);
+ if (ret < 0)
+ return ret;
+ if (mask->index != 0xff)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC, NULL,
+ "partial mask for tag index"
+ " is not supported");
+ ret = mlx5_flow_get_reg_id(dev, MLX5_APP_TAG, spec->index, error);
+ if (ret < 0)
+ return ret;
+ assert(ret != REG_NONE);
+ return 0;
+}
+
+/**
+ * Validate vport item.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] item
+ * Item specification.
+ * @param[in] attr
+ * Attributes of flow that includes this item.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_item_port_id(struct rte_eth_dev *dev,
+ const struct rte_flow_item *item,
+ const struct rte_flow_attr *attr,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_port_id *spec = item->spec;
+ const struct rte_flow_item_port_id *mask = item->mask;
+ const struct rte_flow_item_port_id switch_mask = {
+ .id = 0xffffffff,
+ };
+ struct mlx5_priv *esw_priv;
+ struct mlx5_priv *dev_priv;
+ int ret;
+
+ if (!attr->transfer)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL,
+ "match on port id is valid only"
+ " when transfer flag is enabled");
+ if (item_flags & MLX5_FLOW_ITEM_PORT_ID)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple source ports are not"
+ " supported");
+ if (!mask)
+ mask = &switch_mask;
+ if (mask->id != 0xffffffff)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_MASK,
+ mask,
+ "no support for partial mask on"
+ " \"id\" field");
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_port_id_mask,
+ sizeof(struct rte_flow_item_port_id),
+ error);
+ if (ret)
+ return ret;
+ if (!spec)
+ return 0;
+ esw_priv = mlx5_port_to_eswitch_info(spec->id, false);
+ if (!esw_priv)
+ return rte_flow_error_set(error, rte_errno,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC, spec,
+ "failed to obtain E-Switch info for"
+ " port");
+ dev_priv = mlx5_dev_to_eswitch_info(dev);
+ if (!dev_priv)
+ return rte_flow_error_set(error, rte_errno,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "failed to obtain E-Switch info");
+ if (esw_priv->domain_id != dev_priv->domain_id)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC, spec,
+ "cannot match on a port from a"
+ " different E-Switch");
+ return 0;
+}
+
+/**
+ * Validate GTP item.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_item_gtp(struct rte_eth_dev *dev,
+ const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ const struct rte_flow_item_gtp *mask = item->mask;
+ const struct rte_flow_item_gtp nic_mask = {
+ .msg_type = 0xff,
+ .teid = RTE_BE32(0xffffffff),
+ };
+
+ if (!priv->config.hca_attr.tunnel_stateless_gtp)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "GTP support is not enabled");
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple tunnel layers not"
+ " supported");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "no outer UDP layer found");
+ if (!mask)
+ mask = &rte_flow_item_gtp_mask;
+ return mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_gtp),
+ error);
+}
+
+/**
+ * Validate the pop VLAN action.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the pop vlan action.
+ * @param[in] item_flags
+ * The items found in this flow rule.
+ * @param[in] attr
+ * Pointer to flow attributes.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_pop_vlan(struct rte_eth_dev *dev,
+ uint64_t action_flags,
+ const struct rte_flow_action *action,
+ uint64_t item_flags,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ (void)action;
+ (void)attr;
+ if (!priv->sh->pop_vlan_action)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "pop vlan action is not supported");
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
+ NULL,
+ "pop vlan action not supported for "
+ "egress");
+ if (action_flags & MLX5_FLOW_VLAN_ACTIONS)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "no support for multiple VLAN "
+ "actions");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_VLAN))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "cannot pop vlan without a "
+ "match on (outer) vlan in the flow");
+ if (action_flags & MLX5_FLOW_ACTION_PORT_ID)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "wrong action order, port_id should "
+ "be after pop VLAN action");
+ return 0;
+}
+
+/**
+ * Get VLAN default info from vlan match info.
+ *
+ * @param[in] items
+ * the list of item specifications.
+ * @param[out] vlan
+ * pointer VLAN info to fill to.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static void
+flow_dev_get_vlan_info_from_items(const struct rte_flow_item *items,
+ struct rte_vlan_hdr *vlan)
+{
+ const struct rte_flow_item_vlan nic_mask = {
+ .tci = RTE_BE16(MLX5DV_FLOW_VLAN_PCP_MASK |
+ MLX5DV_FLOW_VLAN_VID_MASK),
+ .inner_type = RTE_BE16(0xffff),
+ };
+
+ if (items == NULL)
+ return;
+ for (; items->type != RTE_FLOW_ITEM_TYPE_END &&
+ items->type != RTE_FLOW_ITEM_TYPE_VLAN; items++)
+ ;
+ if (items->type == RTE_FLOW_ITEM_TYPE_VLAN) {
+ const struct rte_flow_item_vlan *vlan_m = items->mask;
+ const struct rte_flow_item_vlan *vlan_v = items->spec;
+
+ if (!vlan_m)
+ vlan_m = &nic_mask;
+ /* Only full match values are accepted */
+ if ((vlan_m->tci & MLX5DV_FLOW_VLAN_PCP_MASK_BE) ==
+ MLX5DV_FLOW_VLAN_PCP_MASK_BE) {
+ vlan->vlan_tci &= MLX5DV_FLOW_VLAN_PCP_MASK;
+ vlan->vlan_tci |=
+ rte_be_to_cpu_16(vlan_v->tci &
+ MLX5DV_FLOW_VLAN_PCP_MASK_BE);
+ }
+ if ((vlan_m->tci & MLX5DV_FLOW_VLAN_VID_MASK_BE) ==
+ MLX5DV_FLOW_VLAN_VID_MASK_BE) {
+ vlan->vlan_tci &= ~MLX5DV_FLOW_VLAN_VID_MASK;
+ vlan->vlan_tci |=
+ rte_be_to_cpu_16(vlan_v->tci &
+ MLX5DV_FLOW_VLAN_VID_MASK_BE);
+ }
+ if (vlan_m->inner_type == nic_mask.inner_type)
+ vlan->eth_proto = rte_be_to_cpu_16(vlan_v->inner_type &
+ vlan_m->inner_type);
+ }
+}
+
+/**
+ * Validate the push VLAN action.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] item_flags
+ * The items found in this flow rule.
+ * @param[in] action
+ * Pointer to the action structure.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_push_vlan(uint64_t action_flags,
+ uint64_t item_flags __rte_unused,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_of_push_vlan *push_vlan = action->conf;
+
+ if (attr->ingress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "push VLAN action not supported for "
+ "ingress");
+ if (push_vlan->ethertype != RTE_BE16(RTE_ETHER_TYPE_VLAN) &&
+ push_vlan->ethertype != RTE_BE16(RTE_ETHER_TYPE_QINQ))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "invalid vlan ethertype");
+ if (action_flags & MLX5_FLOW_VLAN_ACTIONS)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "no support for multiple VLAN "
+ "actions");
+ if (action_flags & MLX5_FLOW_ACTION_PORT_ID)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "wrong action order, port_id should "
+ "be after push VLAN");
+ (void)attr;
+ return 0;
+}
+
+/**
+ * Validate the set VLAN PCP.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] actions
+ * Pointer to the list of actions remaining in the flow rule.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_set_vlan_pcp(uint64_t action_flags,
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action *action = actions;
+ const struct rte_flow_action_of_set_vlan_pcp *conf = action->conf;
+
+ if (conf->vlan_pcp > 7)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "VLAN PCP value is too big");
+ if (!(action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "set VLAN PCP action must follow "
+ "the push VLAN action");
+ if (action_flags & MLX5_FLOW_ACTION_OF_SET_VLAN_PCP)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "Multiple VLAN PCP modification are "
+ "not supported");
+ if (action_flags & MLX5_FLOW_ACTION_PORT_ID)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "wrong action order, port_id should "
+ "be after set VLAN PCP");
+ return 0;
+}
+
+/**
+ * Validate the set VLAN VID.
+ *
+ * @param[in] item_flags
+ * Holds the items detected in this rule.
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] actions
+ * Pointer to the list of actions remaining in the flow rule.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_set_vlan_vid(uint64_t item_flags,
+ uint64_t action_flags,
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action *action = actions;
+ const struct rte_flow_action_of_set_vlan_vid *conf = action->conf;
+
+ if (conf->vlan_vid > RTE_BE16(0xFFE))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "VLAN VID value is too big");
+ if (!(action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN) &&
+ !(item_flags & MLX5_FLOW_LAYER_OUTER_VLAN))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "set VLAN VID action must follow push"
+ " VLAN action or match on VLAN item");
+ if (action_flags & MLX5_FLOW_ACTION_OF_SET_VLAN_VID)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "Multiple VLAN VID modifications are "
+ "not supported");
+ if (action_flags & MLX5_FLOW_ACTION_PORT_ID)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "wrong action order, port_id should "
+ "be after set VLAN VID");
+ return 0;
+}
+
+/*
+ * Validate the FLAG action.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_flag(struct rte_eth_dev *dev,
+ uint64_t action_flags,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_config *config = &priv->config;
+ int ret;
+
+ /* Fall back if no extended metadata register support. */
+ if (config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY)
+ return mlx5_flow_validate_action_flag(action_flags, attr,
+ error);
+ /* Extensive metadata mode requires registers. */
+ if (!mlx5_flow_ext_mreg_supported(dev))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "no metadata registers "
+ "to support flag action");
+ if (!(priv->sh->dv_mark_mask & MLX5_FLOW_MARK_DEFAULT))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "extended metadata register"
+ " isn't available");
+ ret = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK, 0, error);
+ if (ret < 0)
+ return ret;
+ assert(ret > 0);
+ if (action_flags & MLX5_FLOW_ACTION_MARK)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't mark and flag in same flow");
+ if (action_flags & MLX5_FLOW_ACTION_FLAG)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 flag"
+ " actions in same flow");
+ return 0;
+}
+
+/**
+ * Validate MARK action.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] action
+ * Pointer to action.
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_mark(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ uint64_t action_flags,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_config *config = &priv->config;
+ const struct rte_flow_action_mark *mark = action->conf;
+ int ret;
+
+ /* Fall back if no extended metadata register support. */
+ if (config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY)
+ return mlx5_flow_validate_action_mark(action, action_flags,
+ attr, error);
+ /* Extensive metadata mode requires registers. */
+ if (!mlx5_flow_ext_mreg_supported(dev))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "no metadata registers "
+ "to support mark action");
+ if (!priv->sh->dv_mark_mask)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "extended metadata register"
+ " isn't available");
+ ret = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK, 0, error);
+ if (ret < 0)
+ return ret;
+ assert(ret > 0);
+ if (!mark)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "configuration cannot be null");
+ if (mark->id >= (MLX5_FLOW_MARK_MAX & priv->sh->dv_mark_mask))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &mark->id,
+ "mark id exceeds the limit");
+ if (action_flags & MLX5_FLOW_ACTION_FLAG)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't flag and mark in same flow");
+ if (action_flags & MLX5_FLOW_ACTION_MARK)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 mark actions in same"
+ " flow");
+ return 0;
+}
+
+/**
+ * Validate SET_META action.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] action
+ * Pointer to the action structure.
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_set_meta(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ uint64_t action_flags __rte_unused,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_set_meta *conf;
+ uint32_t nic_mask = UINT32_MAX;
+ int reg;
+
+ if (!mlx5_flow_ext_mreg_supported(dev))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "extended metadata register"
+ " isn't supported");
+ reg = flow_dv_get_metadata_reg(dev, attr, error);
+ if (reg < 0)
+ return reg;
+ if (reg != REG_A && reg != REG_B) {
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ nic_mask = priv->sh->dv_meta_mask;
+ }
+ if (!(action->conf))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "configuration cannot be null");
+ conf = (const struct rte_flow_action_set_meta *)action->conf;
+ if (!conf->mask)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "zero mask doesn't have any effect");
+ if (conf->mask & ~nic_mask)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "meta data must be within reg C0");
+ if (!(conf->data & conf->mask))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "zero value has no effect");
+ return 0;
+}
+
+/**
+ * Validate SET_TAG action.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] action
+ * Pointer to the action structure.
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_set_tag(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ uint64_t action_flags,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_set_tag *conf;
+ const uint64_t terminal_action_flags =
+ MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE |
+ MLX5_FLOW_ACTION_RSS;
+ int ret;
+
+ if (!mlx5_flow_ext_mreg_supported(dev))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "extensive metadata register"
+ " isn't supported");
+ if (!(action->conf))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "configuration cannot be null");
+ conf = (const struct rte_flow_action_set_tag *)action->conf;
+ if (!conf->mask)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "zero mask doesn't have any effect");
+ ret = mlx5_flow_get_reg_id(dev, MLX5_APP_TAG, conf->index, error);
+ if (ret < 0)
+ return ret;
+ if (!attr->transfer && attr->ingress &&
+ (action_flags & terminal_action_flags))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "set_tag has no effect"
+ " with terminal actions");
+ return 0;
+}
+
+/**
+ * Validate count action.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_count(struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ if (!priv->config.devx)
+ goto notsup_err;
+#ifdef HAVE_IBV_FLOW_DEVX_COUNTERS
+ return 0;
+#endif
+notsup_err:
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "count action not supported");
+}
+
+/**
+ * Validate the L2 encap action.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the action structure.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_l2_encap(uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ if (!(action->conf))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "configuration cannot be null");
+ if (action_flags & (MLX5_FLOW_ENCAP_ACTIONS | MLX5_FLOW_DECAP_ACTIONS))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can only have a single encap or"
+ " decap action in a flow");
+ if (!attr->transfer && attr->ingress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "encap action not supported for "
+ "ingress");
+ return 0;
+}
+
+/**
+ * Validate the L2 decap action.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_l2_decap(uint64_t action_flags,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ if (action_flags & (MLX5_FLOW_ENCAP_ACTIONS | MLX5_FLOW_DECAP_ACTIONS))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can only have a single encap or"
+ " decap action in a flow");
+ if (action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have decap action after"
+ " modify action");
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
+ NULL,
+ "decap action not supported for "
+ "egress");
+ return 0;
+}
+
+/**
+ * Validate the raw encap action.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the encap action.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_raw_encap(uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_raw_encap *raw_encap =
+ (const struct rte_flow_action_raw_encap *)action->conf;
+ if (!(action->conf))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "configuration cannot be null");
+ if (action_flags & MLX5_FLOW_ENCAP_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can only have a single encap"
+ " action in a flow");
+ /* encap without preceding decap is not supported for ingress */
+ if (!attr->transfer && attr->ingress &&
+ !(action_flags & MLX5_FLOW_ACTION_RAW_DECAP))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "encap action not supported for "
+ "ingress");
+ if (!raw_encap->size || !raw_encap->data)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "raw encap data cannot be empty");
+ return 0;
+}
+
+/**
+ * Validate the raw decap action.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the encap action.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_raw_decap(uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_raw_decap *decap = action->conf;
+
+ if (action_flags & MLX5_FLOW_ENCAP_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have encap action before"
+ " decap action");
+ if (action_flags & MLX5_FLOW_DECAP_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can only have a single decap"
+ " action in a flow");
+ /* decap action is valid on egress only if it is followed by encap */
+ if (attr->egress && decap &&
+ decap->size > MLX5_ENCAPSULATION_DECISION_SIZE) {
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
+ NULL, "decap action not supported"
+ " for egress");
+ } else if (decap && decap->size > MLX5_ENCAPSULATION_DECISION_SIZE &&
+ (action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS)) {
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "can't have decap action "
+ "after modify action");
+ }
+ return 0;
+}
+
+/**
+ * Find existing encap/decap resource or create and register a new one.
+ *
+ * @param[in, out] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in, out] resource
+ * Pointer to encap/decap resource.
+ * @parm[in, out] dev_flow
+ * Pointer to the dev_flow.
+ * @param[out] error
+ * pointer to error structure.
+ *
+ * @return
+ * 0 on success otherwise -errno and errno is set.
+ */
+static int
+flow_dv_encap_decap_resource_register
+ (struct rte_eth_dev *dev,
+ struct mlx5_flow_dv_encap_decap_resource *resource,
+ struct mlx5_flow *dev_flow,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+ struct mlx5_flow_dv_encap_decap_resource *cache_resource;
+ struct mlx5dv_dr_domain *domain;
+
+ resource->flags = dev_flow->group ? 0 : 1;
+ if (resource->ft_type == MLX5DV_FLOW_TABLE_TYPE_FDB)
+ domain = sh->fdb_domain;
+ else if (resource->ft_type == MLX5DV_FLOW_TABLE_TYPE_NIC_RX)
+ domain = sh->rx_domain;
+ else
+ domain = sh->tx_domain;
+ /* Lookup a matching resource from cache. */
+ LIST_FOREACH(cache_resource, &sh->encaps_decaps, next) {
+ if (resource->reformat_type == cache_resource->reformat_type &&
+ resource->ft_type == cache_resource->ft_type &&
+ resource->flags == cache_resource->flags &&
+ resource->size == cache_resource->size &&
+ !memcmp((const void *)resource->buf,
+ (const void *)cache_resource->buf,
+ resource->size)) {
+ DRV_LOG(DEBUG, "encap/decap resource %p: refcnt %d++",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ rte_atomic32_inc(&cache_resource->refcnt);
+ dev_flow->dv.encap_decap = cache_resource;
+ return 0;
+ }
+ }
+ /* Register new encap/decap resource. */
+ cache_resource = rte_calloc(__func__, 1, sizeof(*cache_resource), 0);
+ if (!cache_resource)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "cannot allocate resource memory");
+ *cache_resource = *resource;
+ cache_resource->verbs_action =
+ mlx5_glue->dv_create_flow_action_packet_reformat
+ (sh->ctx, cache_resource->reformat_type,
+ cache_resource->ft_type, domain, cache_resource->flags,
+ cache_resource->size,
+ (cache_resource->size ? cache_resource->buf : NULL));
+ if (!cache_resource->verbs_action) {
+ rte_free(cache_resource);
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, "cannot create action");
+ }
+ rte_atomic32_init(&cache_resource->refcnt);
+ rte_atomic32_inc(&cache_resource->refcnt);
+ LIST_INSERT_HEAD(&sh->encaps_decaps, cache_resource, next);
+ dev_flow->dv.encap_decap = cache_resource;
+ DRV_LOG(DEBUG, "new encap/decap resource %p: refcnt %d++",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ return 0;
+}
+
+/**
+ * Find existing table jump resource or create and register a new one.
+ *
+ * @param[in, out] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in, out] tbl
+ * Pointer to flow table resource.
+ * @parm[in, out] dev_flow
+ * Pointer to the dev_flow.
+ * @param[out] error
+ * pointer to error structure.
+ *
+ * @return
+ * 0 on success otherwise -errno and errno is set.
+ */
+static int
+flow_dv_jump_tbl_resource_register
+ (struct rte_eth_dev *dev __rte_unused,
+ struct mlx5_flow_tbl_resource *tbl,
+ struct mlx5_flow *dev_flow,
+ struct rte_flow_error *error)
+{
+ struct mlx5_flow_tbl_data_entry *tbl_data =
+ container_of(tbl, struct mlx5_flow_tbl_data_entry, tbl);
+ int cnt;
+
+ assert(tbl);
+ cnt = rte_atomic32_read(&tbl_data->jump.refcnt);
+ if (!cnt) {
+ tbl_data->jump.action =
+ mlx5_glue->dr_create_flow_action_dest_flow_tbl
+ (tbl->obj);
+ if (!tbl_data->jump.action)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, "cannot create jump action");
+ DRV_LOG(DEBUG, "new jump table resource %p: refcnt %d++",
+ (void *)&tbl_data->jump, cnt);
+ } else {
+ assert(tbl_data->jump.action);
+ DRV_LOG(DEBUG, "existed jump table resource %p: refcnt %d++",
+ (void *)&tbl_data->jump, cnt);
+ }
+ rte_atomic32_inc(&tbl_data->jump.refcnt);
+ dev_flow->dv.jump = &tbl_data->jump;
+ return 0;
+}
+
+/**
+ * Find existing table port ID resource or create and register a new one.
+ *
+ * @param[in, out] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in, out] resource
+ * Pointer to port ID action resource.
+ * @parm[in, out] dev_flow
+ * Pointer to the dev_flow.
+ * @param[out] error
+ * pointer to error structure.
+ *
+ * @return
+ * 0 on success otherwise -errno and errno is set.
+ */
+static int
+flow_dv_port_id_action_resource_register
+ (struct rte_eth_dev *dev,
+ struct mlx5_flow_dv_port_id_action_resource *resource,
+ struct mlx5_flow *dev_flow,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+ struct mlx5_flow_dv_port_id_action_resource *cache_resource;
+
+ /* Lookup a matching resource from cache. */
+ LIST_FOREACH(cache_resource, &sh->port_id_action_list, next) {
+ if (resource->port_id == cache_resource->port_id) {
+ DRV_LOG(DEBUG, "port id action resource resource %p: "
+ "refcnt %d++",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ rte_atomic32_inc(&cache_resource->refcnt);
+ dev_flow->dv.port_id_action = cache_resource;
+ return 0;
+ }
+ }
+ /* Register new port id action resource. */
+ cache_resource = rte_calloc(__func__, 1, sizeof(*cache_resource), 0);
+ if (!cache_resource)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "cannot allocate resource memory");
+ *cache_resource = *resource;
+ /*
+ * Depending on rdma_core version the glue routine calls
+ * either mlx5dv_dr_action_create_dest_ib_port(domain, ibv_port)
+ * or mlx5dv_dr_action_create_dest_vport(domain, vport_id).
+ */
+ cache_resource->action =
+ mlx5_glue->dr_create_flow_action_dest_port
+ (priv->sh->fdb_domain, resource->port_id);
+ if (!cache_resource->action) {
+ rte_free(cache_resource);
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, "cannot create action");
+ }
+ rte_atomic32_init(&cache_resource->refcnt);
+ rte_atomic32_inc(&cache_resource->refcnt);
+ LIST_INSERT_HEAD(&sh->port_id_action_list, cache_resource, next);
+ dev_flow->dv.port_id_action = cache_resource;
+ DRV_LOG(DEBUG, "new port id action resource %p: refcnt %d++",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ return 0;
+}
+
+/**
+ * Find existing push vlan resource or create and register a new one.
+ *
+ * @param [in, out] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in, out] resource
+ * Pointer to port ID action resource.
+ * @parm[in, out] dev_flow
+ * Pointer to the dev_flow.
+ * @param[out] error
+ * pointer to error structure.
+ *
+ * @return
+ * 0 on success otherwise -errno and errno is set.
+ */
+static int
+flow_dv_push_vlan_action_resource_register
+ (struct rte_eth_dev *dev,
+ struct mlx5_flow_dv_push_vlan_action_resource *resource,
+ struct mlx5_flow *dev_flow,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+ struct mlx5_flow_dv_push_vlan_action_resource *cache_resource;
+ struct mlx5dv_dr_domain *domain;
+
+ /* Lookup a matching resource from cache. */
+ LIST_FOREACH(cache_resource, &sh->push_vlan_action_list, next) {
+ if (resource->vlan_tag == cache_resource->vlan_tag &&
+ resource->ft_type == cache_resource->ft_type) {
+ DRV_LOG(DEBUG, "push-VLAN action resource resource %p: "
+ "refcnt %d++",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ rte_atomic32_inc(&cache_resource->refcnt);
+ dev_flow->dv.push_vlan_res = cache_resource;
+ return 0;
+ }
+ }
+ /* Register new push_vlan action resource. */
+ cache_resource = rte_calloc(__func__, 1, sizeof(*cache_resource), 0);
+ if (!cache_resource)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "cannot allocate resource memory");
+ *cache_resource = *resource;
+ if (resource->ft_type == MLX5DV_FLOW_TABLE_TYPE_FDB)
+ domain = sh->fdb_domain;
+ else if (resource->ft_type == MLX5DV_FLOW_TABLE_TYPE_NIC_RX)
+ domain = sh->rx_domain;
+ else
+ domain = sh->tx_domain;
+ cache_resource->action =
+ mlx5_glue->dr_create_flow_action_push_vlan(domain,
+ resource->vlan_tag);
+ if (!cache_resource->action) {
+ rte_free(cache_resource);
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, "cannot create action");
+ }
+ rte_atomic32_init(&cache_resource->refcnt);
+ rte_atomic32_inc(&cache_resource->refcnt);
+ LIST_INSERT_HEAD(&sh->push_vlan_action_list, cache_resource, next);
+ dev_flow->dv.push_vlan_res = cache_resource;
+ DRV_LOG(DEBUG, "new push vlan action resource %p: refcnt %d++",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ return 0;
+}
+/**
+ * Get the size of specific rte_flow_item_type
+ *
+ * @param[in] item_type
+ * Tested rte_flow_item_type.
+ *
+ * @return
+ * sizeof struct item_type, 0 if void or irrelevant.
+ */
+static size_t
+flow_dv_get_item_len(const enum rte_flow_item_type item_type)
+{
+ size_t retval;
+
+ switch (item_type) {
+ case RTE_FLOW_ITEM_TYPE_ETH:
+ retval = sizeof(struct rte_flow_item_eth);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VLAN:
+ retval = sizeof(struct rte_flow_item_vlan);
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV4:
+ retval = sizeof(struct rte_flow_item_ipv4);
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV6:
+ retval = sizeof(struct rte_flow_item_ipv6);
+ break;
+ case RTE_FLOW_ITEM_TYPE_UDP:
+ retval = sizeof(struct rte_flow_item_udp);
+ break;
+ case RTE_FLOW_ITEM_TYPE_TCP:
+ retval = sizeof(struct rte_flow_item_tcp);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN:
+ retval = sizeof(struct rte_flow_item_vxlan);
+ break;
+ case RTE_FLOW_ITEM_TYPE_GRE:
+ retval = sizeof(struct rte_flow_item_gre);
+ break;
+ case RTE_FLOW_ITEM_TYPE_NVGRE:
+ retval = sizeof(struct rte_flow_item_nvgre);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
+ retval = sizeof(struct rte_flow_item_vxlan_gpe);
+ break;
+ case RTE_FLOW_ITEM_TYPE_MPLS:
+ retval = sizeof(struct rte_flow_item_mpls);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VOID: /* Fall through. */
+ default:
+ retval = 0;
+ break;
+ }
+ return retval;
+}
+
+#define MLX5_ENCAP_IPV4_VERSION 0x40
+#define MLX5_ENCAP_IPV4_IHL_MIN 0x05
+#define MLX5_ENCAP_IPV4_TTL_DEF 0x40
+#define MLX5_ENCAP_IPV6_VTC_FLOW 0x60000000
+#define MLX5_ENCAP_IPV6_HOP_LIMIT 0xff
+#define MLX5_ENCAP_VXLAN_FLAGS 0x08000000
+#define MLX5_ENCAP_VXLAN_GPE_FLAGS 0x04
+
+/**
+ * Convert the encap action data from list of rte_flow_item to raw buffer
+ *
+ * @param[in] items
+ * Pointer to rte_flow_item objects list.
+ * @param[out] buf
+ * Pointer to the output buffer.
+ * @param[out] size
+ * Pointer to the output buffer size.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_convert_encap_data(const struct rte_flow_item *items, uint8_t *buf,
+ size_t *size, struct rte_flow_error *error)
+{
+ struct rte_ether_hdr *eth = NULL;
+ struct rte_vlan_hdr *vlan = NULL;
+ struct rte_ipv4_hdr *ipv4 = NULL;
+ struct rte_ipv6_hdr *ipv6 = NULL;
+ struct rte_udp_hdr *udp = NULL;
+ struct rte_vxlan_hdr *vxlan = NULL;
+ struct rte_vxlan_gpe_hdr *vxlan_gpe = NULL;
+ struct rte_gre_hdr *gre = NULL;
+ size_t len;
+ size_t temp_size = 0;
+
+ if (!items)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "invalid empty data");
+ for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
+ len = flow_dv_get_item_len(items->type);
+ if (len + temp_size > MLX5_ENCAP_MAX_LEN)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "items total size is too big"
+ " for encap action");
+ rte_memcpy((void *)&buf[temp_size], items->spec, len);
+ switch (items->type) {
+ case RTE_FLOW_ITEM_TYPE_ETH:
+ eth = (struct rte_ether_hdr *)&buf[temp_size];
+ break;
+ case RTE_FLOW_ITEM_TYPE_VLAN:
+ vlan = (struct rte_vlan_hdr *)&buf[temp_size];
+ if (!eth)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "eth header not found");
+ if (!eth->ether_type)
+ eth->ether_type = RTE_BE16(RTE_ETHER_TYPE_VLAN);
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV4:
+ ipv4 = (struct rte_ipv4_hdr *)&buf[temp_size];
+ if (!vlan && !eth)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "neither eth nor vlan"
+ " header found");
+ if (vlan && !vlan->eth_proto)
+ vlan->eth_proto = RTE_BE16(RTE_ETHER_TYPE_IPV4);
+ else if (eth && !eth->ether_type)
+ eth->ether_type = RTE_BE16(RTE_ETHER_TYPE_IPV4);
+ if (!ipv4->version_ihl)
+ ipv4->version_ihl = MLX5_ENCAP_IPV4_VERSION |
+ MLX5_ENCAP_IPV4_IHL_MIN;
+ if (!ipv4->time_to_live)
+ ipv4->time_to_live = MLX5_ENCAP_IPV4_TTL_DEF;
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV6:
+ ipv6 = (struct rte_ipv6_hdr *)&buf[temp_size];
+ if (!vlan && !eth)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "neither eth nor vlan"
+ " header found");
+ if (vlan && !vlan->eth_proto)
+ vlan->eth_proto = RTE_BE16(RTE_ETHER_TYPE_IPV6);
+ else if (eth && !eth->ether_type)
+ eth->ether_type = RTE_BE16(RTE_ETHER_TYPE_IPV6);
+ if (!ipv6->vtc_flow)
+ ipv6->vtc_flow =
+ RTE_BE32(MLX5_ENCAP_IPV6_VTC_FLOW);
+ if (!ipv6->hop_limits)
+ ipv6->hop_limits = MLX5_ENCAP_IPV6_HOP_LIMIT;
+ break;
+ case RTE_FLOW_ITEM_TYPE_UDP:
+ udp = (struct rte_udp_hdr *)&buf[temp_size];
+ if (!ipv4 && !ipv6)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "ip header not found");
+ if (ipv4 && !ipv4->next_proto_id)
+ ipv4->next_proto_id = IPPROTO_UDP;
+ else if (ipv6 && !ipv6->proto)
+ ipv6->proto = IPPROTO_UDP;
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN:
+ vxlan = (struct rte_vxlan_hdr *)&buf[temp_size];
+ if (!udp)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "udp header not found");
+ if (!udp->dst_port)
+ udp->dst_port = RTE_BE16(MLX5_UDP_PORT_VXLAN);
+ if (!vxlan->vx_flags)
+ vxlan->vx_flags =
+ RTE_BE32(MLX5_ENCAP_VXLAN_FLAGS);
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
+ vxlan_gpe = (struct rte_vxlan_gpe_hdr *)&buf[temp_size];
+ if (!udp)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "udp header not found");
+ if (!vxlan_gpe->proto)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "next protocol not found");
+ if (!udp->dst_port)
+ udp->dst_port =
+ RTE_BE16(MLX5_UDP_PORT_VXLAN_GPE);
+ if (!vxlan_gpe->vx_flags)
+ vxlan_gpe->vx_flags =
+ MLX5_ENCAP_VXLAN_GPE_FLAGS;
+ break;
+ case RTE_FLOW_ITEM_TYPE_GRE:
+ case RTE_FLOW_ITEM_TYPE_NVGRE:
+ gre = (struct rte_gre_hdr *)&buf[temp_size];
+ if (!gre->proto)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "next protocol not found");
+ if (!ipv4 && !ipv6)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "ip header not found");
+ if (ipv4 && !ipv4->next_proto_id)
+ ipv4->next_proto_id = IPPROTO_GRE;
+ else if (ipv6 && !ipv6->proto)
+ ipv6->proto = IPPROTO_GRE;
+ break;
+ case RTE_FLOW_ITEM_TYPE_VOID:
+ break;
+ default:
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ (void *)items->type,
+ "unsupported item type");
+ break;
+ }
+ temp_size += len;
+ }
+ *size = temp_size;
+ return 0;
+}
+
+static int
+flow_dv_zero_encap_udp_csum(void *data, struct rte_flow_error *error)
+{
+ struct rte_ether_hdr *eth = NULL;
+ struct rte_vlan_hdr *vlan = NULL;
+ struct rte_ipv6_hdr *ipv6 = NULL;
+ struct rte_udp_hdr *udp = NULL;
+ char *next_hdr;
+ uint16_t proto;
+
+ eth = (struct rte_ether_hdr *)data;
+ next_hdr = (char *)(eth + 1);
+ proto = RTE_BE16(eth->ether_type);
+
+ /* VLAN skipping */
+ while (proto == RTE_ETHER_TYPE_VLAN || proto == RTE_ETHER_TYPE_QINQ) {
+ vlan = (struct rte_vlan_hdr *)next_hdr;
+ proto = RTE_BE16(vlan->eth_proto);
+ next_hdr += sizeof(struct rte_vlan_hdr);
+ }
+
+ /* HW calculates IPv4 csum. no need to proceed */
+ if (proto == RTE_ETHER_TYPE_IPV4)
+ return 0;
+
+ /* non IPv4/IPv6 header. not supported */
+ if (proto != RTE_ETHER_TYPE_IPV6) {
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "Cannot offload non IPv4/IPv6");
+ }
+
+ ipv6 = (struct rte_ipv6_hdr *)next_hdr;
+
+ /* ignore non UDP */
+ if (ipv6->proto != IPPROTO_UDP)
+ return 0;
+
+ udp = (struct rte_udp_hdr *)(ipv6 + 1);
+ udp->dgram_cksum = 0;
+
+ return 0;
+}
+
+/**
+ * Convert L2 encap action to DV specification.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in] action
+ * Pointer to action structure.
+ * @param[in, out] dev_flow
+ * Pointer to the mlx5_flow.
+ * @param[in] transfer
+ * Mark if the flow is E-Switch flow.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_create_action_l2_encap(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ struct mlx5_flow *dev_flow,
+ uint8_t transfer,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item *encap_data;
+ const struct rte_flow_action_raw_encap *raw_encap_data;
+ struct mlx5_flow_dv_encap_decap_resource res = {
+ .reformat_type =
+ MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L2_TUNNEL,
+ .ft_type = transfer ? MLX5DV_FLOW_TABLE_TYPE_FDB :
+ MLX5DV_FLOW_TABLE_TYPE_NIC_TX,
+ };
+
+ if (action->type == RTE_FLOW_ACTION_TYPE_RAW_ENCAP) {
+ raw_encap_data =
+ (const struct rte_flow_action_raw_encap *)action->conf;
+ res.size = raw_encap_data->size;
+ memcpy(res.buf, raw_encap_data->data, res.size);
+ } else {
+ if (action->type == RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP)
+ encap_data =
+ ((const struct rte_flow_action_vxlan_encap *)
+ action->conf)->definition;
+ else
+ encap_data =
+ ((const struct rte_flow_action_nvgre_encap *)
+ action->conf)->definition;
+ if (flow_dv_convert_encap_data(encap_data, res.buf,
+ &res.size, error))
+ return -rte_errno;
+ }
+ if (flow_dv_zero_encap_udp_csum(res.buf, error))
+ return -rte_errno;
+ if (flow_dv_encap_decap_resource_register(dev, &res, dev_flow, error))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "can't create L2 encap action");
+ return 0;
+}
+
+/**
+ * Convert L2 decap action to DV specification.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in, out] dev_flow
+ * Pointer to the mlx5_flow.
+ * @param[in] transfer
+ * Mark if the flow is E-Switch flow.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_create_action_l2_decap(struct rte_eth_dev *dev,
+ struct mlx5_flow *dev_flow,
+ uint8_t transfer,
+ struct rte_flow_error *error)
+{
+ struct mlx5_flow_dv_encap_decap_resource res = {
+ .size = 0,
+ .reformat_type =
+ MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TUNNEL_TO_L2,
+ .ft_type = transfer ? MLX5DV_FLOW_TABLE_TYPE_FDB :
+ MLX5DV_FLOW_TABLE_TYPE_NIC_RX,
+ };
+
+ if (flow_dv_encap_decap_resource_register(dev, &res, dev_flow, error))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "can't create L2 decap action");
+ return 0;
+}
+
+/**
+ * Convert raw decap/encap (L3 tunnel) action to DV specification.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in] action
+ * Pointer to action structure.
+ * @param[in, out] dev_flow
+ * Pointer to the mlx5_flow.
+ * @param[in] attr
+ * Pointer to the flow attributes.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_create_action_raw_encap(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ struct mlx5_flow *dev_flow,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_raw_encap *encap_data;
+ struct mlx5_flow_dv_encap_decap_resource res;
+
+ encap_data = (const struct rte_flow_action_raw_encap *)action->conf;
+ res.size = encap_data->size;
+ memcpy(res.buf, encap_data->data, res.size);
+ res.reformat_type = res.size < MLX5_ENCAPSULATION_DECISION_SIZE ?
+ MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L3_TUNNEL_TO_L2 :
+ MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L3_TUNNEL;
+ if (attr->transfer)
+ res.ft_type = MLX5DV_FLOW_TABLE_TYPE_FDB;
+ else
+ res.ft_type = attr->egress ? MLX5DV_FLOW_TABLE_TYPE_NIC_TX :
+ MLX5DV_FLOW_TABLE_TYPE_NIC_RX;
+ if (flow_dv_encap_decap_resource_register(dev, &res, dev_flow, error))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "can't create encap action");
+ return 0;
+}
+
+/**
+ * Create action push VLAN.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in] attr
+ * Pointer to the flow attributes.
+ * @param[in] vlan
+ * Pointer to the vlan to push to the Ethernet header.
+ * @param[in, out] dev_flow
+ * Pointer to the mlx5_flow.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_create_action_push_vlan(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_vlan_hdr *vlan,
+ struct mlx5_flow *dev_flow,
+ struct rte_flow_error *error)
+{
+ struct mlx5_flow_dv_push_vlan_action_resource res;
+
+ res.vlan_tag =
+ rte_cpu_to_be_32(((uint32_t)vlan->eth_proto) << 16 |
+ vlan->vlan_tci);
+ if (attr->transfer)
+ res.ft_type = MLX5DV_FLOW_TABLE_TYPE_FDB;
+ else
+ res.ft_type = attr->egress ? MLX5DV_FLOW_TABLE_TYPE_NIC_TX :
+ MLX5DV_FLOW_TABLE_TYPE_NIC_RX;
+ return flow_dv_push_vlan_action_resource_register
+ (dev, &res, dev_flow, error);
+}
+
+/**
+ * Validate the modify-header actions.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_hdr(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ struct rte_flow_error *error)
+{
+ if (action->type != RTE_FLOW_ACTION_TYPE_DEC_TTL && !action->conf)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ NULL, "action configuration not set");
+ if (action_flags & MLX5_FLOW_ENCAP_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have encap action before"
+ " modify action");
+ return 0;
+}
+
+/**
+ * Validate the modify-header MAC address actions.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[in] item_flags
+ * Holds the items detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_mac(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ int ret = 0;
+
+ ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
+ if (!ret) {
+ if (!(item_flags & MLX5_FLOW_LAYER_L2))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "no L2 item in pattern");
+ }
+ return ret;
+}
+
+/**
+ * Validate the modify-header IPv4 address actions.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[in] item_flags
+ * Holds the items detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_ipv4(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ int ret = 0;
+
+ ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
+ if (!ret) {
+ if (!(item_flags & MLX5_FLOW_LAYER_L3_IPV4))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "no ipv4 item in pattern");
+ }
+ return ret;
+}
+
+/**
+ * Validate the modify-header IPv6 address actions.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[in] item_flags
+ * Holds the items detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_ipv6(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ int ret = 0;
+
+ ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
+ if (!ret) {
+ if (!(item_flags & MLX5_FLOW_LAYER_L3_IPV6))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "no ipv6 item in pattern");
+ }
+ return ret;
+}
+
+/**
+ * Validate the modify-header TP actions.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[in] item_flags
+ * Holds the items detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_tp(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ int ret = 0;
+
+ ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
+ if (!ret) {
+ if (!(item_flags & MLX5_FLOW_LAYER_L4))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "no transport layer "
+ "in pattern");
+ }
+ return ret;
+}
+
+/**
+ * Validate the modify-header actions of increment/decrement
+ * TCP Sequence-number.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[in] item_flags
+ * Holds the items detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_tcp_seq(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ int ret = 0;
+
+ ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
+ if (!ret) {
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_TCP))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "no TCP item in"
+ " pattern");
+ if ((action->type == RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ &&
+ (action_flags & MLX5_FLOW_ACTION_DEC_TCP_SEQ)) ||
+ (action->type == RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ &&
+ (action_flags & MLX5_FLOW_ACTION_INC_TCP_SEQ)))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "cannot decrease and increase"
+ " TCP sequence number"
+ " at the same time");
+ }
+ return ret;
+}
+
+/**
+ * Validate the modify-header actions of increment/decrement
+ * TCP Acknowledgment number.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[in] item_flags
+ * Holds the items detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_tcp_ack(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ int ret = 0;
+
+ ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
+ if (!ret) {
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_TCP))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "no TCP item in"
+ " pattern");
+ if ((action->type == RTE_FLOW_ACTION_TYPE_INC_TCP_ACK &&
+ (action_flags & MLX5_FLOW_ACTION_DEC_TCP_ACK)) ||
+ (action->type == RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK &&
+ (action_flags & MLX5_FLOW_ACTION_INC_TCP_ACK)))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "cannot decrease and increase"
+ " TCP acknowledgment number"
+ " at the same time");
+ }
+ return ret;
+}
+
+/**
+ * Validate the modify-header TTL actions.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[in] item_flags
+ * Holds the items detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_ttl(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ int ret = 0;
+
+ ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
+ if (!ret) {
+ if (!(item_flags & MLX5_FLOW_LAYER_L3))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "no IP protocol in pattern");
+ }
+ return ret;
+}
+
+/**
+ * Validate jump action.
+ *
+ * @param[in] action
+ * Pointer to the jump action.
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] attributes
+ * Pointer to flow attributes
+ * @param[in] external
+ * Action belongs to flow rule created by request external to PMD.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_jump(const struct rte_flow_action *action,
+ uint64_t action_flags,
+ const struct rte_flow_attr *attributes,
+ bool external, struct rte_flow_error *error)
+{
+ uint32_t target_group, table;
+ int ret = 0;
+
+ if (action_flags & (MLX5_FLOW_FATE_ACTIONS |
+ MLX5_FLOW_FATE_ESWITCH_ACTIONS))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 fate actions in"
+ " same flow");
+ if (action_flags & MLX5_FLOW_ACTION_METER)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "jump with meter not support");
+ if (!action->conf)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ NULL, "action configuration not set");
+ target_group =
+ ((const struct rte_flow_action_jump *)action->conf)->group;
+ ret = mlx5_flow_group_to_table(attributes, external, target_group,
+ &table, error);
+ if (ret)
+ return ret;
+ if (attributes->group == target_group)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "target group must be other than"
+ " the current flow group");
+ return 0;
+}
+
+/*
+ * Validate the port_id action.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[in] action
+ * Port_id RTE action structure.
+ * @param[in] attr
+ * Attributes of flow that includes this action.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_port_id(struct rte_eth_dev *dev,
+ uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_port_id *port_id;
+ struct mlx5_priv *act_priv;
+ struct mlx5_priv *dev_priv;
+ uint16_t port;
+
+ if (!attr->transfer)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "port id action is valid in transfer"
+ " mode only");
+ if (!action || !action->conf)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ NULL,
+ "port id action parameters must be"
+ " specified");
+ if (action_flags & (MLX5_FLOW_FATE_ACTIONS |
+ MLX5_FLOW_FATE_ESWITCH_ACTIONS))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can have only one fate actions in"
+ " a flow");
+ dev_priv = mlx5_dev_to_eswitch_info(dev);
+ if (!dev_priv)
+ return rte_flow_error_set(error, rte_errno,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "failed to obtain E-Switch info");
+ port_id = action->conf;
+ port = port_id->original ? dev->data->port_id : port_id->id;
+ act_priv = mlx5_port_to_eswitch_info(port, false);
+ if (!act_priv)
+ return rte_flow_error_set
+ (error, rte_errno,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF, port_id,
+ "failed to obtain E-Switch port id for port");
+ if (act_priv->domain_id != dev_priv->domain_id)
+ return rte_flow_error_set
+ (error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "port does not belong to"
+ " E-Switch being configured");
+ return 0;
+}
+
+/**
+ * Get the maximum number of modify header actions.
+ *
+ * @param dev
+ * Pointer to rte_eth_dev structure.
+ * @param flags
+ * Flags bits to check if root level.
+ *
+ * @return
+ * Max number of modify header actions device can support.
+ */
+static unsigned int
+flow_dv_modify_hdr_action_max(struct rte_eth_dev *dev, uint64_t flags)
+{
+ /*
+ * There's no way to directly query the max cap. Although it has to be
+ * acquried by iterative trial, it is a safe assumption that more
+ * actions are supported by FW if extensive metadata register is
+ * supported. (Only in the root table)
+ */
+ if (!(flags & MLX5DV_DR_ACTION_FLAGS_ROOT_LEVEL))
+ return MLX5_MAX_MODIFY_NUM;
+ else
+ return mlx5_flow_ext_mreg_supported(dev) ?
+ MLX5_ROOT_TBL_MODIFY_NUM :
+ MLX5_ROOT_TBL_MODIFY_NUM_NO_MREG;
+}
+
+/**
+ * Validate the meter action.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the meter action.
+ * @param[in] attr
+ * Attributes of flow that includes this action.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+static int
+mlx5_flow_validate_action_meter(struct rte_eth_dev *dev,
+ uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ const struct rte_flow_action_meter *am = action->conf;
+ struct mlx5_flow_meter *fm;
+
+ if (!am)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "meter action conf is NULL");
+
+ if (action_flags & MLX5_FLOW_ACTION_METER)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "meter chaining not support");
+ if (action_flags & MLX5_FLOW_ACTION_JUMP)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "meter with jump not support");
+ if (!priv->mtr_en)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "meter action not supported");
+ fm = mlx5_flow_meter_find(priv, am->mtr_id);
+ if (!fm)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "Meter not found");
+ if (fm->ref_cnt && (!(fm->attr.transfer == attr->transfer ||
+ (!fm->attr.ingress && !attr->ingress && attr->egress) ||
+ (!fm->attr.egress && !attr->egress && attr->ingress))))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "Flow attributes are either invalid "
+ "or have a conflict with current "
+ "meter attributes");
+ return 0;
+}
+
+/**
+ * Validate the modify-header IPv4 DSCP actions.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[in] item_flags
+ * Holds the items detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_ipv4_dscp(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ int ret = 0;
+
+ ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
+ if (!ret) {
+ if (!(item_flags & MLX5_FLOW_LAYER_L3_IPV4))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "no ipv4 item in pattern");
+ }
+ return ret;
+}
+
+/**
+ * Validate the modify-header IPv6 DSCP actions.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the modify action.
+ * @param[in] item_flags
+ * Holds the items detected.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_modify_ipv6_dscp(const uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ int ret = 0;
+
+ ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
+ if (!ret) {
+ if (!(item_flags & MLX5_FLOW_LAYER_L3_IPV6))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "no ipv6 item in pattern");
+ }
+ return ret;
+}
+
+/**
+ * Find existing modify-header resource or create and register a new one.
+ *
+ * @param dev[in, out]
+ * Pointer to rte_eth_dev structure.
+ * @param[in, out] resource
+ * Pointer to modify-header resource.
+ * @parm[in, out] dev_flow
+ * Pointer to the dev_flow.
+ * @param[out] error
+ * pointer to error structure.
+ *
+ * @return
+ * 0 on success otherwise -errno and errno is set.
+ */
+static int
+flow_dv_modify_hdr_resource_register
+ (struct rte_eth_dev *dev,
+ struct mlx5_flow_dv_modify_hdr_resource *resource,
+ struct mlx5_flow *dev_flow,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+ struct mlx5_flow_dv_modify_hdr_resource *cache_resource;
+ struct mlx5dv_dr_domain *ns;
+ uint32_t actions_len;
+
+ resource->flags =
+ dev_flow->group ? 0 : MLX5DV_DR_ACTION_FLAGS_ROOT_LEVEL;
+ if (resource->actions_num > flow_dv_modify_hdr_action_max(dev,
+ resource->flags))
+ return rte_flow_error_set(error, EOVERFLOW,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "too many modify header items");
+ if (resource->ft_type == MLX5DV_FLOW_TABLE_TYPE_FDB)
+ ns = sh->fdb_domain;
+ else if (resource->ft_type == MLX5DV_FLOW_TABLE_TYPE_NIC_TX)
+ ns = sh->tx_domain;
+ else
+ ns = sh->rx_domain;
+ /* Lookup a matching resource from cache. */
+ actions_len = resource->actions_num * sizeof(resource->actions[0]);
+ LIST_FOREACH(cache_resource, &sh->modify_cmds, next) {
+ if (resource->ft_type == cache_resource->ft_type &&
+ resource->actions_num == cache_resource->actions_num &&
+ resource->flags == cache_resource->flags &&
+ !memcmp((const void *)resource->actions,
+ (const void *)cache_resource->actions,
+ actions_len)) {
+ DRV_LOG(DEBUG, "modify-header resource %p: refcnt %d++",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ rte_atomic32_inc(&cache_resource->refcnt);
+ dev_flow->dv.modify_hdr = cache_resource;
+ return 0;
+ }
+ }
+ /* Register new modify-header resource. */
+ cache_resource = rte_calloc(__func__, 1,
+ sizeof(*cache_resource) + actions_len, 0);
+ if (!cache_resource)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "cannot allocate resource memory");
+ *cache_resource = *resource;
+ rte_memcpy(cache_resource->actions, resource->actions, actions_len);
+ cache_resource->verbs_action =
+ mlx5_glue->dv_create_flow_action_modify_header
+ (sh->ctx, cache_resource->ft_type, ns,
+ cache_resource->flags, actions_len,
+ (uint64_t *)cache_resource->actions);
+ if (!cache_resource->verbs_action) {
+ rte_free(cache_resource);
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, "cannot create action");
+ }
+ rte_atomic32_init(&cache_resource->refcnt);
+ rte_atomic32_inc(&cache_resource->refcnt);
+ LIST_INSERT_HEAD(&sh->modify_cmds, cache_resource, next);
+ dev_flow->dv.modify_hdr = cache_resource;
+ DRV_LOG(DEBUG, "new modify-header resource %p: refcnt %d++",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ return 0;
+}
+
+#define MLX5_CNT_CONTAINER_RESIZE 64
+
+/**
+ * Get or create a flow counter.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] shared
+ * Indicate if this counter is shared with other flows.
+ * @param[in] id
+ * Counter identifier.
+ *
+ * @return
+ * pointer to flow counter on success, NULL otherwise and rte_errno is set.
+ */
+static struct mlx5_flow_counter *
+flow_dv_counter_alloc_fallback(struct rte_eth_dev *dev, uint32_t shared,
+ uint32_t id)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_flow_counter *cnt = NULL;
+ struct mlx5_devx_obj *dcs = NULL;
+
+ if (!priv->config.devx) {
+ rte_errno = ENOTSUP;
+ return NULL;
+ }
+ if (shared) {
+ TAILQ_FOREACH(cnt, &priv->sh->cmng.flow_counters, next) {
+ if (cnt->shared && cnt->id == id) {
+ cnt->ref_cnt++;
+ return cnt;
+ }
+ }
+ }
+ dcs = mlx5_devx_cmd_flow_counter_alloc(priv->sh->ctx, 0);
+ if (!dcs)
+ return NULL;
+ cnt = rte_calloc(__func__, 1, sizeof(*cnt), 0);
+ if (!cnt) {
+ claim_zero(mlx5_devx_cmd_destroy(cnt->dcs));
+ rte_errno = ENOMEM;
+ return NULL;
+ }
+ struct mlx5_flow_counter tmpl = {
+ .shared = shared,
+ .ref_cnt = 1,
+ .id = id,
+ .dcs = dcs,
+ };
+ tmpl.action = mlx5_glue->dv_create_flow_action_counter(dcs->obj, 0);
+ if (!tmpl.action) {
+ claim_zero(mlx5_devx_cmd_destroy(cnt->dcs));
+ rte_errno = errno;
+ rte_free(cnt);
+ return NULL;
+ }
+ *cnt = tmpl;
+ TAILQ_INSERT_HEAD(&priv->sh->cmng.flow_counters, cnt, next);
+ return cnt;
+}
+
+/**
+ * Release a flow counter.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] counter
+ * Pointer to the counter handler.
+ */
+static void
+flow_dv_counter_release_fallback(struct rte_eth_dev *dev,
+ struct mlx5_flow_counter *counter)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ if (!counter)
+ return;
+ if (--counter->ref_cnt == 0) {
+ TAILQ_REMOVE(&priv->sh->cmng.flow_counters, counter, next);
+ claim_zero(mlx5_devx_cmd_destroy(counter->dcs));
+ rte_free(counter);
+ }
+}
+
+/**
+ * Query a devx flow counter.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] cnt
+ * Pointer to the flow counter.
+ * @param[out] pkts
+ * The statistics value of packets.
+ * @param[out] bytes
+ * The statistics value of bytes.
+ *
+ * @return
+ * 0 on success, otherwise a negative errno value and rte_errno is set.
+ */
+static inline int
+_flow_dv_query_count_fallback(struct rte_eth_dev *dev __rte_unused,
+ struct mlx5_flow_counter *cnt, uint64_t *pkts,
+ uint64_t *bytes)
+{
+ return mlx5_devx_cmd_flow_counter_query(cnt->dcs, 0, 0, pkts, bytes,
+ 0, NULL, NULL, 0);
+}
+
+/**
+ * Get a pool by a counter.
+ *
+ * @param[in] cnt
+ * Pointer to the counter.
+ *
+ * @return
+ * The counter pool.
+ */
+static struct mlx5_flow_counter_pool *
+flow_dv_counter_pool_get(struct mlx5_flow_counter *cnt)
+{
+ if (!cnt->batch) {
+ cnt -= cnt->dcs->id % MLX5_COUNTERS_PER_POOL;
+ return (struct mlx5_flow_counter_pool *)cnt - 1;
+ }
+ return cnt->pool;
+}
+
+/**
+ * Get a pool by devx counter ID.
+ *
+ * @param[in] cont
+ * Pointer to the counter container.
+ * @param[in] id
+ * The counter devx ID.
+ *
+ * @return
+ * The counter pool pointer if exists, NULL otherwise,
+ */
+static struct mlx5_flow_counter_pool *
+flow_dv_find_pool_by_id(struct mlx5_pools_container *cont, int id)
+{
+ struct mlx5_flow_counter_pool *pool;
+
+ TAILQ_FOREACH(pool, &cont->pool_list, next) {
+ int base = (pool->min_dcs->id / MLX5_COUNTERS_PER_POOL) *
+ MLX5_COUNTERS_PER_POOL;
+
+ if (id >= base && id < base + MLX5_COUNTERS_PER_POOL)
+ return pool;
+ };
+ return NULL;
+}
+
+/**
+ * Allocate a new memory for the counter values wrapped by all the needed
+ * management.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] raws_n
+ * The raw memory areas - each one for MLX5_COUNTERS_PER_POOL counters.
+ *
+ * @return
+ * The new memory management pointer on success, otherwise NULL and rte_errno
+ * is set.
+ */
+static struct mlx5_counter_stats_mem_mng *
+flow_dv_create_counter_stat_mem_mng(struct rte_eth_dev *dev, int raws_n)
+{
+ struct mlx5_ibv_shared *sh = ((struct mlx5_priv *)
+ (dev->data->dev_private))->sh;
+ struct mlx5_devx_mkey_attr mkey_attr;
+ struct mlx5_counter_stats_mem_mng *mem_mng;
+ volatile struct flow_counter_stats *raw_data;
+ int size = (sizeof(struct flow_counter_stats) *
+ MLX5_COUNTERS_PER_POOL +
+ sizeof(struct mlx5_counter_stats_raw)) * raws_n +
+ sizeof(struct mlx5_counter_stats_mem_mng);
+ uint8_t *mem = rte_calloc(__func__, 1, size, sysconf(_SC_PAGESIZE));
+ int i;
+
+ if (!mem) {
+ rte_errno = ENOMEM;
+ return NULL;
+ }
+ mem_mng = (struct mlx5_counter_stats_mem_mng *)(mem + size) - 1;
+ size = sizeof(*raw_data) * MLX5_COUNTERS_PER_POOL * raws_n;
+ mem_mng->umem = mlx5_glue->devx_umem_reg(sh->ctx, mem, size,
+ IBV_ACCESS_LOCAL_WRITE);
+ if (!mem_mng->umem) {
+ rte_errno = errno;
+ rte_free(mem);
+ return NULL;
+ }
+ mkey_attr.addr = (uintptr_t)mem;
+ mkey_attr.size = size;
+ mkey_attr.umem_id = mem_mng->umem->umem_id;
+ mkey_attr.pd = sh->pdn;
+ mem_mng->dm = mlx5_devx_cmd_mkey_create(sh->ctx, &mkey_attr);
+ if (!mem_mng->dm) {
+ mlx5_glue->devx_umem_dereg(mem_mng->umem);
+ rte_errno = errno;
+ rte_free(mem);
+ return NULL;
+ }
+ mem_mng->raws = (struct mlx5_counter_stats_raw *)(mem + size);
+ raw_data = (volatile struct flow_counter_stats *)mem;
+ for (i = 0; i < raws_n; ++i) {
+ mem_mng->raws[i].mem_mng = mem_mng;
+ mem_mng->raws[i].data = raw_data + i * MLX5_COUNTERS_PER_POOL;
+ }
+ LIST_INSERT_HEAD(&sh->cmng.mem_mngs, mem_mng, next);
+ return mem_mng;
+}
+
+/**
+ * Resize a counter container.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] batch
+ * Whether the pool is for counter that was allocated by batch command.
+ *
+ * @return
+ * The new container pointer on success, otherwise NULL and rte_errno is set.
+ */
+static struct mlx5_pools_container *
+flow_dv_container_resize(struct rte_eth_dev *dev, uint32_t batch)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_pools_container *cont =
+ MLX5_CNT_CONTAINER(priv->sh, batch, 0);
+ struct mlx5_pools_container *new_cont =
+ MLX5_CNT_CONTAINER_UNUSED(priv->sh, batch, 0);
+ struct mlx5_counter_stats_mem_mng *mem_mng;
+ uint32_t resize = cont->n + MLX5_CNT_CONTAINER_RESIZE;
+ uint32_t mem_size = sizeof(struct mlx5_flow_counter_pool *) * resize;
+ int i;
+
+ if (cont != MLX5_CNT_CONTAINER(priv->sh, batch, 1)) {
+ /* The last resize still hasn't detected by the host thread. */
+ rte_errno = EAGAIN;
+ return NULL;
+ }
+ new_cont->pools = rte_calloc(__func__, 1, mem_size, 0);
+ if (!new_cont->pools) {
+ rte_errno = ENOMEM;
+ return NULL;
+ }
+ if (cont->n)
+ memcpy(new_cont->pools, cont->pools, cont->n *
+ sizeof(struct mlx5_flow_counter_pool *));
+ mem_mng = flow_dv_create_counter_stat_mem_mng(dev,
+ MLX5_CNT_CONTAINER_RESIZE + MLX5_MAX_PENDING_QUERIES);
+ if (!mem_mng) {
+ rte_free(new_cont->pools);
+ return NULL;
+ }
+ for (i = 0; i < MLX5_MAX_PENDING_QUERIES; ++i)
+ LIST_INSERT_HEAD(&priv->sh->cmng.free_stat_raws,
+ mem_mng->raws + MLX5_CNT_CONTAINER_RESIZE +
+ i, next);
+ new_cont->n = resize;
+ rte_atomic16_set(&new_cont->n_valid, rte_atomic16_read(&cont->n_valid));
+ TAILQ_INIT(&new_cont->pool_list);
+ TAILQ_CONCAT(&new_cont->pool_list, &cont->pool_list, next);
+ new_cont->init_mem_mng = mem_mng;
+ rte_cio_wmb();
+ /* Flip the master container. */
+ priv->sh->cmng.mhi[batch] ^= (uint8_t)1;
+ return new_cont;
+}
+
+/**
+ * Query a devx flow counter.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] cnt
+ * Pointer to the flow counter.
+ * @param[out] pkts
+ * The statistics value of packets.
+ * @param[out] bytes
+ * The statistics value of bytes.
+ *
+ * @return
+ * 0 on success, otherwise a negative errno value and rte_errno is set.
+ */
+static inline int
+_flow_dv_query_count(struct rte_eth_dev *dev,
+ struct mlx5_flow_counter *cnt, uint64_t *pkts,
+ uint64_t *bytes)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_flow_counter_pool *pool =
+ flow_dv_counter_pool_get(cnt);
+ int offset = cnt - &pool->counters_raw[0];
+
+ if (priv->counter_fallback)
+ return _flow_dv_query_count_fallback(dev, cnt, pkts, bytes);
+
+ rte_spinlock_lock(&pool->sl);
+ /*
+ * The single counters allocation may allocate smaller ID than the
+ * current allocated in parallel to the host reading.
+ * In this case the new counter values must be reported as 0.
+ */
+ if (unlikely(!cnt->batch && cnt->dcs->id < pool->raw->min_dcs_id)) {
+ *pkts = 0;
+ *bytes = 0;
+ } else {
+ *pkts = rte_be_to_cpu_64(pool->raw->data[offset].hits);
+ *bytes = rte_be_to_cpu_64(pool->raw->data[offset].bytes);
+ }
+ rte_spinlock_unlock(&pool->sl);
+ return 0;
+}
+
+/**
+ * Create and initialize a new counter pool.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[out] dcs
+ * The devX counter handle.
+ * @param[in] batch
+ * Whether the pool is for counter that was allocated by batch command.
+ *
+ * @return
+ * A new pool pointer on success, NULL otherwise and rte_errno is set.
+ */
+static struct mlx5_flow_counter_pool *
+flow_dv_pool_create(struct rte_eth_dev *dev, struct mlx5_devx_obj *dcs,
+ uint32_t batch)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_flow_counter_pool *pool;
+ struct mlx5_pools_container *cont = MLX5_CNT_CONTAINER(priv->sh, batch,
+ 0);
+ int16_t n_valid = rte_atomic16_read(&cont->n_valid);
+ uint32_t size;
+
+ if (cont->n == n_valid) {
+ cont = flow_dv_container_resize(dev, batch);
+ if (!cont)
+ return NULL;
+ }
+ size = sizeof(*pool) + MLX5_COUNTERS_PER_POOL *
+ sizeof(struct mlx5_flow_counter);
+ pool = rte_calloc(__func__, 1, size, 0);
+ if (!pool) {
+ rte_errno = ENOMEM;
+ return NULL;
+ }
+ pool->min_dcs = dcs;
+ pool->raw = cont->init_mem_mng->raws + n_valid %
+ MLX5_CNT_CONTAINER_RESIZE;
+ pool->raw_hw = NULL;
+ rte_spinlock_init(&pool->sl);
+ /*
+ * The generation of the new allocated counters in this pool is 0, 2 in
+ * the pool generation makes all the counters valid for allocation.
+ */
+ rte_atomic64_set(&pool->query_gen, 0x2);
+ TAILQ_INIT(&pool->counters);
+ TAILQ_INSERT_TAIL(&cont->pool_list, pool, next);
+ cont->pools[n_valid] = pool;
+ /* Pool initialization must be updated before host thread access. */
+ rte_cio_wmb();
+ rte_atomic16_add(&cont->n_valid, 1);
+ return pool;
+}
+
+/**
+ * Prepare a new counter and/or a new counter pool.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[out] cnt_free
+ * Where to put the pointer of a new counter.
+ * @param[in] batch
+ * Whether the pool is for counter that was allocated by batch command.
+ *
+ * @return
+ * The free counter pool pointer and @p cnt_free is set on success,
+ * NULL otherwise and rte_errno is set.
+ */
+static struct mlx5_flow_counter_pool *
+flow_dv_counter_pool_prepare(struct rte_eth_dev *dev,
+ struct mlx5_flow_counter **cnt_free,
+ uint32_t batch)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_flow_counter_pool *pool;
+ struct mlx5_devx_obj *dcs = NULL;
+ struct mlx5_flow_counter *cnt;
+ uint32_t i;
+
+ if (!batch) {
+ /* bulk_bitmap must be 0 for single counter allocation. */
+ dcs = mlx5_devx_cmd_flow_counter_alloc(priv->sh->ctx, 0);
+ if (!dcs)
+ return NULL;
+ pool = flow_dv_find_pool_by_id
+ (MLX5_CNT_CONTAINER(priv->sh, batch, 0), dcs->id);
+ if (!pool) {
+ pool = flow_dv_pool_create(dev, dcs, batch);
+ if (!pool) {
+ mlx5_devx_cmd_destroy(dcs);
+ return NULL;
+ }
+ } else if (dcs->id < pool->min_dcs->id) {
+ rte_atomic64_set(&pool->a64_dcs,
+ (int64_t)(uintptr_t)dcs);
+ }
+ cnt = &pool->counters_raw[dcs->id % MLX5_COUNTERS_PER_POOL];
+ TAILQ_INSERT_HEAD(&pool->counters, cnt, next);
+ cnt->dcs = dcs;
+ *cnt_free = cnt;
+ return pool;
+ }
+ /* bulk_bitmap is in 128 counters units. */
+ if (priv->config.hca_attr.flow_counter_bulk_alloc_bitmap & 0x4)
+ dcs = mlx5_devx_cmd_flow_counter_alloc(priv->sh->ctx, 0x4);
+ if (!dcs) {
+ rte_errno = ENODATA;
+ return NULL;
+ }
+ pool = flow_dv_pool_create(dev, dcs, batch);
+ if (!pool) {
+ mlx5_devx_cmd_destroy(dcs);
+ return NULL;
+ }
+ for (i = 0; i < MLX5_COUNTERS_PER_POOL; ++i) {
+ cnt = &pool->counters_raw[i];
+ cnt->pool = pool;
+ TAILQ_INSERT_HEAD(&pool->counters, cnt, next);
+ }
+ *cnt_free = &pool->counters_raw[0];
+ return pool;
+}
+
+/**
+ * Search for existed shared counter.
+ *
+ * @param[in] cont
+ * Pointer to the relevant counter pool container.
+ * @param[in] id
+ * The shared counter ID to search.
+ *
+ * @return
+ * NULL if not existed, otherwise pointer to the shared counter.
+ */
+static struct mlx5_flow_counter *
+flow_dv_counter_shared_search(struct mlx5_pools_container *cont,
+ uint32_t id)
+{
+ static struct mlx5_flow_counter *cnt;
+ struct mlx5_flow_counter_pool *pool;
+ int i;
+
+ TAILQ_FOREACH(pool, &cont->pool_list, next) {
+ for (i = 0; i < MLX5_COUNTERS_PER_POOL; ++i) {
+ cnt = &pool->counters_raw[i];
+ if (cnt->ref_cnt && cnt->shared && cnt->id == id)
+ return cnt;
+ }
+ }
+ return NULL;
+}
+
+/**
+ * Allocate a flow counter.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] shared
+ * Indicate if this counter is shared with other flows.
+ * @param[in] id
+ * Counter identifier.
+ * @param[in] group
+ * Counter flow group.
+ *
+ * @return
+ * pointer to flow counter on success, NULL otherwise and rte_errno is set.
+ */
+static struct mlx5_flow_counter *
+flow_dv_counter_alloc(struct rte_eth_dev *dev, uint32_t shared, uint32_t id,
+ uint16_t group)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_flow_counter_pool *pool = NULL;
+ struct mlx5_flow_counter *cnt_free = NULL;
+ /*
+ * Currently group 0 flow counter cannot be assigned to a flow if it is
+ * not the first one in the batch counter allocation, so it is better
+ * to allocate counters one by one for these flows in a separate
+ * container.
+ * A counter can be shared between different groups so need to take
+ * shared counters from the single container.
+ */
+ uint32_t batch = (group && !shared) ? 1 : 0;
+ struct mlx5_pools_container *cont = MLX5_CNT_CONTAINER(priv->sh, batch,
+ 0);
+
+ if (priv->counter_fallback)
+ return flow_dv_counter_alloc_fallback(dev, shared, id);
+ if (!priv->config.devx) {
+ rte_errno = ENOTSUP;
+ return NULL;
+ }
+ if (shared) {
+ cnt_free = flow_dv_counter_shared_search(cont, id);
+ if (cnt_free) {
+ if (cnt_free->ref_cnt + 1 == 0) {
+ rte_errno = E2BIG;
+ return NULL;
+ }
+ cnt_free->ref_cnt++;
+ return cnt_free;
+ }
+ }
+ /* Pools which has a free counters are in the start. */
+ TAILQ_FOREACH(pool, &cont->pool_list, next) {
+ /*
+ * The free counter reset values must be updated between the
+ * counter release to the counter allocation, so, at least one
+ * query must be done in this time. ensure it by saving the
+ * query generation in the release time.
+ * The free list is sorted according to the generation - so if
+ * the first one is not updated, all the others are not
+ * updated too.
+ */
+ cnt_free = TAILQ_FIRST(&pool->counters);
+ if (cnt_free && cnt_free->query_gen + 1 <
+ rte_atomic64_read(&pool->query_gen))
+ break;
+ cnt_free = NULL;
+ }
+ if (!cnt_free) {
+ pool = flow_dv_counter_pool_prepare(dev, &cnt_free, batch);
+ if (!pool)
+ return NULL;
+ }
+ cnt_free->batch = batch;
+ /* Create a DV counter action only in the first time usage. */
+ if (!cnt_free->action) {
+ uint16_t offset;
+ struct mlx5_devx_obj *dcs;
+
+ if (batch) {
+ offset = cnt_free - &pool->counters_raw[0];
+ dcs = pool->min_dcs;
+ } else {
+ offset = 0;
+ dcs = cnt_free->dcs;
+ }
+ cnt_free->action = mlx5_glue->dv_create_flow_action_counter
+ (dcs->obj, offset);
+ if (!cnt_free->action) {
+ rte_errno = errno;
+ return NULL;
+ }
+ }
+ /* Update the counter reset values. */
+ if (_flow_dv_query_count(dev, cnt_free, &cnt_free->hits,
+ &cnt_free->bytes))
+ return NULL;
+ cnt_free->shared = shared;
+ cnt_free->ref_cnt = 1;
+ cnt_free->id = id;
+ if (!priv->sh->cmng.query_thread_on)
+ /* Start the asynchronous batch query by the host thread. */
+ mlx5_set_query_alarm(priv->sh);
+ TAILQ_REMOVE(&pool->counters, cnt_free, next);
+ if (TAILQ_EMPTY(&pool->counters)) {
+ /* Move the pool to the end of the container pool list. */
+ TAILQ_REMOVE(&cont->pool_list, pool, next);
+ TAILQ_INSERT_TAIL(&cont->pool_list, pool, next);
+ }
+ return cnt_free;
+}
+
+/**
+ * Release a flow counter.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] counter
+ * Pointer to the counter handler.
+ */
+static void
+flow_dv_counter_release(struct rte_eth_dev *dev,
+ struct mlx5_flow_counter *counter)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ if (!counter)
+ return;
+ if (priv->counter_fallback) {
+ flow_dv_counter_release_fallback(dev, counter);
+ return;
+ }
+ if (--counter->ref_cnt == 0) {
+ struct mlx5_flow_counter_pool *pool =
+ flow_dv_counter_pool_get(counter);
+
+ /* Put the counter in the end - the last updated one. */
+ TAILQ_INSERT_TAIL(&pool->counters, counter, next);
+ counter->query_gen = rte_atomic64_read(&pool->query_gen);
+ }
+}
+
+/**
+ * Verify the @p attributes will be correctly understood by the NIC and store
+ * them in the @p flow if everything is correct.
+ *
+ * @param[in] dev
+ * Pointer to dev struct.
+ * @param[in] attributes
+ * Pointer to flow attributes
+ * @param[in] external
+ * This flow rule is created by request external to PMD.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_attributes(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attributes,
+ bool external __rte_unused,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ uint32_t priority_max = priv->config.flow_prio - 1;
+
+#ifndef HAVE_MLX5DV_DR
+ if (attributes->group)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
+ NULL,
+ "groups are not supported");
+#else
+ uint32_t table;
+ int ret;
+
+ ret = mlx5_flow_group_to_table(attributes, external,
+ attributes->group,
+ &table, error);
+ if (ret)
+ return ret;
+#endif
+ if (attributes->priority != MLX5_FLOW_PRIO_RSVD &&
+ attributes->priority >= priority_max)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
+ NULL,
+ "priority out of range");
+ if (attributes->transfer) {
+ if (!priv->config.dv_esw_en)
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "E-Switch dr is not supported");
+ if (!(priv->representor || priv->master))
+ return rte_flow_error_set
+ (error, EINVAL, RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, "E-Switch configuration can only be"
+ " done by a master or a representor device");
+ if (attributes->egress)
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, attributes,
+ "egress is not supported");
+ }
+ if (!(attributes->egress ^ attributes->ingress))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR, NULL,
+ "must specify exactly one of "
+ "ingress or egress");
+ return 0;
+}
+
+/**
+ * Internal validation function. For validating both actions and items.
+ *
+ * @param[in] dev
+ * Pointer to the rte_eth_dev structure.
+ * @param[in] attr
+ * Pointer to the flow attributes.
+ * @param[in] items
+ * Pointer to the list of items.
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[in] external
+ * This flow rule is created by request external to PMD.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate(struct rte_eth_dev *dev, const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ bool external, struct rte_flow_error *error)
+{
+ int ret;
+ uint64_t action_flags = 0;
+ uint64_t item_flags = 0;
+ uint64_t last_item = 0;
+ uint8_t next_protocol = 0xff;
+ uint16_t ether_type = 0;
+ int actions_n = 0;
+ uint8_t item_ipv6_proto = 0;
+ const struct rte_flow_item *gre_item = NULL;
+ struct rte_flow_item_tcp nic_tcp_mask = {
+ .hdr = {
+ .tcp_flags = 0xFF,
+ .src_port = RTE_BE16(UINT16_MAX),
+ .dst_port = RTE_BE16(UINT16_MAX),
+ }
+ };
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_config *dev_conf = &priv->config;
+
+ if (items == NULL)
+ return -1;
+ ret = flow_dv_validate_attributes(dev, attr, external, error);
+ if (ret < 0)
+ return ret;
+ for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
+ int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ int type = items->type;
+
+ switch (type) {
+ case RTE_FLOW_ITEM_TYPE_VOID:
+ break;
+ case RTE_FLOW_ITEM_TYPE_PORT_ID:
+ ret = flow_dv_validate_item_port_id
+ (dev, items, attr, item_flags, error);
+ if (ret < 0)
+ return ret;
+ last_item = MLX5_FLOW_ITEM_PORT_ID;
+ break;
+ case RTE_FLOW_ITEM_TYPE_ETH:
+ ret = mlx5_flow_validate_item_eth(items, item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
+ MLX5_FLOW_LAYER_OUTER_L2;
+ if (items->mask != NULL && items->spec != NULL) {
+ ether_type =
+ ((const struct rte_flow_item_eth *)
+ items->spec)->type;
+ ether_type &=
+ ((const struct rte_flow_item_eth *)
+ items->mask)->type;
+ ether_type = rte_be_to_cpu_16(ether_type);
+ } else {
+ ether_type = 0;
+ }
+ break;
+ case RTE_FLOW_ITEM_TYPE_VLAN:
+ ret = mlx5_flow_validate_item_vlan(items, item_flags,
+ dev, error);
+ if (ret < 0)
+ return ret;
+ last_item = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
+ MLX5_FLOW_LAYER_OUTER_VLAN;
+ if (items->mask != NULL && items->spec != NULL) {
+ ether_type =
+ ((const struct rte_flow_item_vlan *)
+ items->spec)->inner_type;
+ ether_type &=
+ ((const struct rte_flow_item_vlan *)
+ items->mask)->inner_type;
+ ether_type = rte_be_to_cpu_16(ether_type);
+ } else {
+ ether_type = 0;
+ }
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV4:
+ mlx5_flow_tunnel_ip_check(items, next_protocol,
+ &item_flags, &tunnel);
+ ret = mlx5_flow_validate_item_ipv4(items, item_flags,
+ last_item,
+ ether_type, NULL,
+ error);
+ if (ret < 0)
+ return ret;
+ last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV4 :
+ MLX5_FLOW_LAYER_OUTER_L3_IPV4;
+ if (items->mask != NULL &&
+ ((const struct rte_flow_item_ipv4 *)
+ items->mask)->hdr.next_proto_id) {
+ next_protocol =
+ ((const struct rte_flow_item_ipv4 *)
+ (items->spec))->hdr.next_proto_id;
+ next_protocol &=
+ ((const struct rte_flow_item_ipv4 *)
+ (items->mask))->hdr.next_proto_id;
+ } else {
+ /* Reset for inner layer. */
+ next_protocol = 0xff;
+ }
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV6:
+ mlx5_flow_tunnel_ip_check(items, next_protocol,
+ &item_flags, &tunnel);
+ ret = mlx5_flow_validate_item_ipv6(items, item_flags,
+ last_item,
+ ether_type, NULL,
+ error);
+ if (ret < 0)
+ return ret;
+ last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV6 :
+ MLX5_FLOW_LAYER_OUTER_L3_IPV6;
+ if (items->mask != NULL &&
+ ((const struct rte_flow_item_ipv6 *)
+ items->mask)->hdr.proto) {
+ item_ipv6_proto =
+ ((const struct rte_flow_item_ipv6 *)
+ items->spec)->hdr.proto;
+ next_protocol =
+ ((const struct rte_flow_item_ipv6 *)
+ items->spec)->hdr.proto;
+ next_protocol &=
+ ((const struct rte_flow_item_ipv6 *)
+ items->mask)->hdr.proto;
+ } else {
+ /* Reset for inner layer. */
+ next_protocol = 0xff;
+ }
+ break;
+ case RTE_FLOW_ITEM_TYPE_TCP:
+ ret = mlx5_flow_validate_item_tcp
+ (items, item_flags,
+ next_protocol,
+ &nic_tcp_mask,
+ error);
+ if (ret < 0)
+ return ret;
+ last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L4_TCP :
+ MLX5_FLOW_LAYER_OUTER_L4_TCP;
+ break;
+ case RTE_FLOW_ITEM_TYPE_UDP:
+ ret = mlx5_flow_validate_item_udp(items, item_flags,
+ next_protocol,
+ error);
+ if (ret < 0)
+ return ret;
+ last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L4_UDP :
+ MLX5_FLOW_LAYER_OUTER_L4_UDP;
+ break;
+ case RTE_FLOW_ITEM_TYPE_GRE:
+ ret = mlx5_flow_validate_item_gre(items, item_flags,
+ next_protocol, error);
+ if (ret < 0)
+ return ret;
+ gre_item = items;
+ last_item = MLX5_FLOW_LAYER_GRE;
+ break;
+ case RTE_FLOW_ITEM_TYPE_NVGRE:
+ ret = mlx5_flow_validate_item_nvgre(items, item_flags,
+ next_protocol,
+ error);
+ if (ret < 0)
+ return ret;
+ last_item = MLX5_FLOW_LAYER_NVGRE;
+ break;
+ case RTE_FLOW_ITEM_TYPE_GRE_KEY:
+ ret = mlx5_flow_validate_item_gre_key
+ (items, item_flags, gre_item, error);
+ if (ret < 0)
+ return ret;
+ last_item = MLX5_FLOW_LAYER_GRE_KEY;
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN:
+ ret = mlx5_flow_validate_item_vxlan(items, item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ last_item = MLX5_FLOW_LAYER_VXLAN;
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
+ ret = mlx5_flow_validate_item_vxlan_gpe(items,
+ item_flags, dev,
+ error);
+ if (ret < 0)
+ return ret;
+ last_item = MLX5_FLOW_LAYER_VXLAN_GPE;
+ break;
+ case RTE_FLOW_ITEM_TYPE_GENEVE:
+ ret = mlx5_flow_validate_item_geneve(items,
+ item_flags, dev,
+ error);
+ if (ret < 0)
+ return ret;
+ last_item = MLX5_FLOW_LAYER_GENEVE;
+ break;
+ case RTE_FLOW_ITEM_TYPE_MPLS:
+ ret = mlx5_flow_validate_item_mpls(dev, items,
+ item_flags,
+ last_item, error);
+ if (ret < 0)
+ return ret;
+ last_item = MLX5_FLOW_LAYER_MPLS;
+ break;
+
+ case RTE_FLOW_ITEM_TYPE_MARK:
+ ret = flow_dv_validate_item_mark(dev, items, attr,
+ error);
+ if (ret < 0)
+ return ret;
+ last_item = MLX5_FLOW_ITEM_MARK;
+ break;
+ case RTE_FLOW_ITEM_TYPE_META:
+ ret = flow_dv_validate_item_meta(dev, items, attr,
+ error);
+ if (ret < 0)
+ return ret;
+ last_item = MLX5_FLOW_ITEM_METADATA;
+ break;
+ case RTE_FLOW_ITEM_TYPE_ICMP:
+ ret = mlx5_flow_validate_item_icmp(items, item_flags,
+ next_protocol,
+ error);
+ if (ret < 0)
+ return ret;
+ last_item = MLX5_FLOW_LAYER_ICMP;
+ break;
+ case RTE_FLOW_ITEM_TYPE_ICMP6:
+ ret = mlx5_flow_validate_item_icmp6(items, item_flags,
+ next_protocol,
+ error);
+ if (ret < 0)
+ return ret;
+ last_item = MLX5_FLOW_LAYER_ICMP6;
+ break;
+ case RTE_FLOW_ITEM_TYPE_TAG:
+ ret = flow_dv_validate_item_tag(dev, items,
+ attr, error);
+ if (ret < 0)
+ return ret;
+ last_item = MLX5_FLOW_ITEM_TAG;
+ break;
+ case MLX5_RTE_FLOW_ITEM_TYPE_TAG:
+ case MLX5_RTE_FLOW_ITEM_TYPE_TX_QUEUE:
+ break;
+ case RTE_FLOW_ITEM_TYPE_GTP:
+ ret = flow_dv_validate_item_gtp(dev, items, item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ last_item = MLX5_FLOW_LAYER_GTP;
+ break;
+ default:
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL, "item not supported");
+ }
+ item_flags |= last_item;
+ }
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ int type = actions->type;
+ if (actions_n == MLX5_DV_MAX_NUMBER_OF_ACTIONS)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ actions, "too many actions");
+ switch (type) {
+ case RTE_FLOW_ACTION_TYPE_VOID:
+ break;
+ case RTE_FLOW_ACTION_TYPE_PORT_ID:
+ ret = flow_dv_validate_action_port_id(dev,
+ action_flags,
+ actions,
+ attr,
+ error);
+ if (ret)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_PORT_ID;
+ ++actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_FLAG:
+ ret = flow_dv_validate_action_flag(dev, action_flags,
+ attr, error);
+ if (ret < 0)
+ return ret;
+ if (dev_conf->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
+ /* Count all modify-header actions as one. */
+ if (!(action_flags &
+ MLX5_FLOW_MODIFY_HDR_ACTIONS))
+ ++actions_n;
+ action_flags |= MLX5_FLOW_ACTION_FLAG |
+ MLX5_FLOW_ACTION_MARK_EXT;
+ } else {
+ action_flags |= MLX5_FLOW_ACTION_FLAG;
+ ++actions_n;
+ }
+ break;
+ case RTE_FLOW_ACTION_TYPE_MARK:
+ ret = flow_dv_validate_action_mark(dev, actions,
+ action_flags,
+ attr, error);
+ if (ret < 0)
+ return ret;
+ if (dev_conf->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
+ /* Count all modify-header actions as one. */
+ if (!(action_flags &
+ MLX5_FLOW_MODIFY_HDR_ACTIONS))
+ ++actions_n;
+ action_flags |= MLX5_FLOW_ACTION_MARK |
+ MLX5_FLOW_ACTION_MARK_EXT;
+ } else {
+ action_flags |= MLX5_FLOW_ACTION_MARK;
+ ++actions_n;
+ }
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_META:
+ ret = flow_dv_validate_action_set_meta(dev, actions,
+ action_flags,
+ attr, error);
+ if (ret < 0)
+ return ret;
+ /* Count all modify-header actions as one action. */
+ if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
+ ++actions_n;
+ action_flags |= MLX5_FLOW_ACTION_SET_META;
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_TAG:
+ ret = flow_dv_validate_action_set_tag(dev, actions,
+ action_flags,
+ attr, error);
+ if (ret < 0)
+ return ret;
+ /* Count all modify-header actions as one action. */
+ if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
+ ++actions_n;
+ action_flags |= MLX5_FLOW_ACTION_SET_TAG;
+ break;
+ case RTE_FLOW_ACTION_TYPE_DROP:
+ ret = mlx5_flow_validate_action_drop(action_flags,
+ attr, error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_DROP;
+ ++actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_QUEUE:
+ ret = mlx5_flow_validate_action_queue(actions,
+ action_flags, dev,
+ attr, error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_QUEUE;
+ ++actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RSS:
+ ret = mlx5_flow_validate_action_rss(actions,
+ action_flags, dev,
+ attr, item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_RSS;
+ ++actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_COUNT:
+ ret = flow_dv_validate_action_count(dev, error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_COUNT;
+ ++actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN:
+ if (flow_dv_validate_action_pop_vlan(dev,
+ action_flags,
+ actions,
+ item_flags, attr,
+ error))
+ return -rte_errno;
+ action_flags |= MLX5_FLOW_ACTION_OF_POP_VLAN;
+ ++actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
+ ret = flow_dv_validate_action_push_vlan(action_flags,
+ item_flags,
+ actions, attr,
+ error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_OF_PUSH_VLAN;
+ ++actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
+ ret = flow_dv_validate_action_set_vlan_pcp
+ (action_flags, actions, error);
+ if (ret < 0)
+ return ret;
+ /* Count PCP with push_vlan command. */
+ action_flags |= MLX5_FLOW_ACTION_OF_SET_VLAN_PCP;
+ break;
+ case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
+ ret = flow_dv_validate_action_set_vlan_vid
+ (item_flags, action_flags,
+ actions, error);
+ if (ret < 0)
+ return ret;
+ /* Count VID with push_vlan command. */
+ action_flags |= MLX5_FLOW_ACTION_OF_SET_VLAN_VID;
+ break;
+ case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
+ case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
+ ret = flow_dv_validate_action_l2_encap(action_flags,
+ actions, attr,
+ error);
+ if (ret < 0)
+ return ret;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP ?
+ MLX5_FLOW_ACTION_VXLAN_ENCAP :
+ MLX5_FLOW_ACTION_NVGRE_ENCAP;
+ ++actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
+ case RTE_FLOW_ACTION_TYPE_NVGRE_DECAP:
+ ret = flow_dv_validate_action_l2_decap(action_flags,
+ attr, error);
+ if (ret < 0)
+ return ret;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_VXLAN_DECAP ?
+ MLX5_FLOW_ACTION_VXLAN_DECAP :
+ MLX5_FLOW_ACTION_NVGRE_DECAP;
+ ++actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
+ ret = flow_dv_validate_action_raw_encap(action_flags,
+ actions, attr,
+ error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_RAW_ENCAP;
+ ++actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
+ ret = flow_dv_validate_action_raw_decap(action_flags,
+ actions, attr,
+ error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_RAW_DECAP;
+ ++actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_MAC_SRC:
+ case RTE_FLOW_ACTION_TYPE_SET_MAC_DST:
+ ret = flow_dv_validate_action_modify_mac(action_flags,
+ actions,
+ item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ /* Count all modify-header actions as one action. */
+ if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
+ ++actions_n;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_SET_MAC_SRC ?
+ MLX5_FLOW_ACTION_SET_MAC_SRC :
+ MLX5_FLOW_ACTION_SET_MAC_DST;
+ break;
+
+ case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
+ case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
+ ret = flow_dv_validate_action_modify_ipv4(action_flags,
+ actions,
+ item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ /* Count all modify-header actions as one action. */
+ if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
+ ++actions_n;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC ?
+ MLX5_FLOW_ACTION_SET_IPV4_SRC :
+ MLX5_FLOW_ACTION_SET_IPV4_DST;
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
+ case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
+ ret = flow_dv_validate_action_modify_ipv6(action_flags,
+ actions,
+ item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ if (item_ipv6_proto == IPPROTO_ICMPV6)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ actions,
+ "Can't change header "
+ "with ICMPv6 proto");
+ /* Count all modify-header actions as one action. */
+ if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
+ ++actions_n;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC ?
+ MLX5_FLOW_ACTION_SET_IPV6_SRC :
+ MLX5_FLOW_ACTION_SET_IPV6_DST;
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
+ case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
+ ret = flow_dv_validate_action_modify_tp(action_flags,
+ actions,
+ item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ /* Count all modify-header actions as one action. */
+ if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
+ ++actions_n;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_SET_TP_SRC ?
+ MLX5_FLOW_ACTION_SET_TP_SRC :
+ MLX5_FLOW_ACTION_SET_TP_DST;
+ break;
+ case RTE_FLOW_ACTION_TYPE_DEC_TTL:
+ case RTE_FLOW_ACTION_TYPE_SET_TTL:
+ ret = flow_dv_validate_action_modify_ttl(action_flags,
+ actions,
+ item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ /* Count all modify-header actions as one action. */
+ if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
+ ++actions_n;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_SET_TTL ?
+ MLX5_FLOW_ACTION_SET_TTL :
+ MLX5_FLOW_ACTION_DEC_TTL;
+ break;
+ case RTE_FLOW_ACTION_TYPE_JUMP:
+ ret = flow_dv_validate_action_jump(actions,
+ action_flags,
+ attr, external,
+ error);
+ if (ret)
+ return ret;
+ ++actions_n;
+ action_flags |= MLX5_FLOW_ACTION_JUMP;
+ break;
+ case RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ:
+ case RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ:
+ ret = flow_dv_validate_action_modify_tcp_seq
+ (action_flags,
+ actions,
+ item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ /* Count all modify-header actions as one action. */
+ if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
+ ++actions_n;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ ?
+ MLX5_FLOW_ACTION_INC_TCP_SEQ :
+ MLX5_FLOW_ACTION_DEC_TCP_SEQ;
+ break;
+ case RTE_FLOW_ACTION_TYPE_INC_TCP_ACK:
+ case RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK:
+ ret = flow_dv_validate_action_modify_tcp_ack
+ (action_flags,
+ actions,
+ item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ /* Count all modify-header actions as one action. */
+ if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
+ ++actions_n;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_INC_TCP_ACK ?
+ MLX5_FLOW_ACTION_INC_TCP_ACK :
+ MLX5_FLOW_ACTION_DEC_TCP_ACK;
+ break;
+ case MLX5_RTE_FLOW_ACTION_TYPE_TAG:
+ case MLX5_RTE_FLOW_ACTION_TYPE_MARK:
+ case MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG:
+ break;
+ case RTE_FLOW_ACTION_TYPE_METER:
+ ret = mlx5_flow_validate_action_meter(dev,
+ action_flags,
+ actions, attr,
+ error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_METER;
+ ++actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP:
+ ret = flow_dv_validate_action_modify_ipv4_dscp
+ (action_flags,
+ actions,
+ item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ /* Count all modify-header actions as one action. */
+ if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
+ ++actions_n;
+ action_flags |= MLX5_FLOW_ACTION_SET_IPV4_DSCP;
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP:
+ ret = flow_dv_validate_action_modify_ipv6_dscp
+ (action_flags,
+ actions,
+ item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ /* Count all modify-header actions as one action. */
+ if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
+ ++actions_n;
+ action_flags |= MLX5_FLOW_ACTION_SET_IPV6_DSCP;
+ break;
+ default:
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ actions,
+ "action not supported");
+ }
+ }
+ /*
+ * Validate the drop action mutual exclusion with other actions.
+ * Drop action is mutually-exclusive with any other action, except for
+ * Count action.
+ */
+ if ((action_flags & MLX5_FLOW_ACTION_DROP) &&
+ (action_flags & ~(MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_COUNT)))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "Drop action is mutually-exclusive "
+ "with any other action, except for "
+ "Count action");
+ /* Eswitch has few restrictions on using items and actions */
+ if (attr->transfer) {
+ if (!mlx5_flow_ext_mreg_supported(dev) &&
+ action_flags & MLX5_FLOW_ACTION_FLAG)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "unsupported action FLAG");
+ if (!mlx5_flow_ext_mreg_supported(dev) &&
+ action_flags & MLX5_FLOW_ACTION_MARK)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "unsupported action MARK");
+ if (action_flags & MLX5_FLOW_ACTION_QUEUE)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "unsupported action QUEUE");
+ if (action_flags & MLX5_FLOW_ACTION_RSS)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "unsupported action RSS");
+ if (!(action_flags & MLX5_FLOW_FATE_ESWITCH_ACTIONS))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ actions,
+ "no fate action is found");
+ } else {
+ if (!(action_flags & MLX5_FLOW_FATE_ACTIONS) && attr->ingress)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ actions,
+ "no fate action is found");
+ }
+ return 0;
+}
+
+/**
+ * Internal preparation function. Allocates the DV flow size,
+ * this size is constant.
+ *
+ * @param[in] attr
+ * Pointer to the flow attributes.
+ * @param[in] items
+ * Pointer to the list of items.
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * Pointer to mlx5_flow object on success,
+ * otherwise NULL and rte_errno is set.
+ */
+static struct mlx5_flow *
+flow_dv_prepare(const struct rte_flow_attr *attr __rte_unused,
+ const struct rte_flow_item items[] __rte_unused,
+ const struct rte_flow_action actions[] __rte_unused,
+ struct rte_flow_error *error)
+{
+ size_t size = sizeof(struct mlx5_flow);
+ struct mlx5_flow *dev_flow;
+
+ dev_flow = rte_calloc(__func__, 1, size, 0);
+ if (!dev_flow) {
+ rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "not enough memory to create flow");
+ return NULL;
+ }
+ dev_flow->dv.value.size = MLX5_ST_SZ_BYTES(fte_match_param);
+ dev_flow->ingress = attr->ingress;
+ dev_flow->transfer = attr->transfer;
+ return dev_flow;
+}
+
+#ifndef NDEBUG
+/**
+ * Sanity check for match mask and value. Similar to check_valid_spec() in
+ * kernel driver. If unmasked bit is present in value, it returns failure.
+ *
+ * @param match_mask
+ * pointer to match mask buffer.
+ * @param match_value
+ * pointer to match value buffer.
+ *
+ * @return
+ * 0 if valid, -EINVAL otherwise.
+ */
+static int
+flow_dv_check_valid_spec(void *match_mask, void *match_value)
+{
+ uint8_t *m = match_mask;
+ uint8_t *v = match_value;
+ unsigned int i;
+
+ for (i = 0; i < MLX5_ST_SZ_BYTES(fte_match_param); ++i) {
+ if (v[i] & ~m[i]) {
+ DRV_LOG(ERR,
+ "match_value differs from match_criteria"
+ " %p[%u] != %p[%u]",
+ match_value, i, match_mask, i);
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+#endif
+
+/**
+ * Add Ethernet item to matcher and to the value.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ */
+static void
+flow_dv_translate_item_eth(void *matcher, void *key,
+ const struct rte_flow_item *item, int inner)
+{
+ const struct rte_flow_item_eth *eth_m = item->mask;
+ const struct rte_flow_item_eth *eth_v = item->spec;
+ const struct rte_flow_item_eth nic_mask = {
+ .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .type = RTE_BE16(0xffff),
+ };
+ void *headers_m;
+ void *headers_v;
+ char *l24_v;
+ unsigned int i;
+
+ if (!eth_v)
+ return;
+ if (!eth_m)
+ eth_m = &nic_mask;
+ if (inner) {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ inner_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
+ } else {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ outer_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
+ }
+ memcpy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_m, dmac_47_16),
+ ð_m->dst, sizeof(eth_m->dst));
+ /* The value must be in the range of the mask. */
+ l24_v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v, dmac_47_16);
+ for (i = 0; i < sizeof(eth_m->dst); ++i)
+ l24_v[i] = eth_m->dst.addr_bytes[i] & eth_v->dst.addr_bytes[i];
+ memcpy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_m, smac_47_16),
+ ð_m->src, sizeof(eth_m->src));
+ l24_v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v, smac_47_16);
+ /* The value must be in the range of the mask. */
+ for (i = 0; i < sizeof(eth_m->dst); ++i)
+ l24_v[i] = eth_m->src.addr_bytes[i] & eth_v->src.addr_bytes[i];
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ethertype,
+ rte_be_to_cpu_16(eth_m->type));
+ l24_v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v, ethertype);
+ *(uint16_t *)(l24_v) = eth_m->type & eth_v->type;
+}
+
+/**
+ * Add VLAN item to matcher and to the value.
+ *
+ * @param[in, out] dev_flow
+ * Flow descriptor.
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ */
+static void
+flow_dv_translate_item_vlan(struct mlx5_flow *dev_flow,
+ void *matcher, void *key,
+ const struct rte_flow_item *item,
+ int inner)
+{
+ const struct rte_flow_item_vlan *vlan_m = item->mask;
+ const struct rte_flow_item_vlan *vlan_v = item->spec;
+ void *headers_m;
+ void *headers_v;
+ uint16_t tci_m;
+ uint16_t tci_v;
+
+ if (!vlan_v)
+ return;
+ if (!vlan_m)
+ vlan_m = &rte_flow_item_vlan_mask;
+ if (inner) {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ inner_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
+ } else {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ outer_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
+ /*
+ * This is workaround, masks are not supported,
+ * and pre-validated.
+ */
+ dev_flow->dv.vf_vlan.tag =
+ rte_be_to_cpu_16(vlan_v->tci) & 0x0fff;
+ }
+ tci_m = rte_be_to_cpu_16(vlan_m->tci);
+ tci_v = rte_be_to_cpu_16(vlan_m->tci & vlan_v->tci);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, cvlan_tag, 1);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, cvlan_tag, 1);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, first_vid, tci_m);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, first_vid, tci_v);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, first_cfi, tci_m >> 12);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, first_cfi, tci_v >> 12);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, first_prio, tci_m >> 13);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, first_prio, tci_v >> 13);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ethertype,
+ rte_be_to_cpu_16(vlan_m->inner_type));
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ethertype,
+ rte_be_to_cpu_16(vlan_m->inner_type & vlan_v->inner_type));
+}
+
+/**
+ * Add IPV4 item to matcher and to the value.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ * @param[in] group
+ * The group to insert the rule.
+ */
+static void
+flow_dv_translate_item_ipv4(void *matcher, void *key,
+ const struct rte_flow_item *item,
+ int inner, uint32_t group)
+{
+ const struct rte_flow_item_ipv4 *ipv4_m = item->mask;
+ const struct rte_flow_item_ipv4 *ipv4_v = item->spec;
+ const struct rte_flow_item_ipv4 nic_mask = {
+ .hdr = {
+ .src_addr = RTE_BE32(0xffffffff),
+ .dst_addr = RTE_BE32(0xffffffff),
+ .type_of_service = 0xff,
+ .next_proto_id = 0xff,
+ },
+ };
+ void *headers_m;
+ void *headers_v;
+ char *l24_m;
+ char *l24_v;
+ uint8_t tos;
+
+ if (inner) {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ inner_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
+ } else {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ outer_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
+ }
+ if (group == 0)
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_version, 0xf);
+ else
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_version, 0x4);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_version, 4);
+ if (!ipv4_v)
+ return;
+ if (!ipv4_m)
+ ipv4_m = &nic_mask;
+ l24_m = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_m,
+ dst_ipv4_dst_ipv6.ipv4_layout.ipv4);
+ l24_v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v,
+ dst_ipv4_dst_ipv6.ipv4_layout.ipv4);
+ *(uint32_t *)l24_m = ipv4_m->hdr.dst_addr;
+ *(uint32_t *)l24_v = ipv4_m->hdr.dst_addr & ipv4_v->hdr.dst_addr;
+ l24_m = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_m,
+ src_ipv4_src_ipv6.ipv4_layout.ipv4);
+ l24_v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v,
+ src_ipv4_src_ipv6.ipv4_layout.ipv4);
+ *(uint32_t *)l24_m = ipv4_m->hdr.src_addr;
+ *(uint32_t *)l24_v = ipv4_m->hdr.src_addr & ipv4_v->hdr.src_addr;
+ tos = ipv4_m->hdr.type_of_service & ipv4_v->hdr.type_of_service;
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_ecn,
+ ipv4_m->hdr.type_of_service);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_ecn, tos);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_dscp,
+ ipv4_m->hdr.type_of_service >> 2);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_dscp, tos >> 2);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_protocol,
+ ipv4_m->hdr.next_proto_id);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol,
+ ipv4_v->hdr.next_proto_id & ipv4_m->hdr.next_proto_id);
+}
+
+/**
+ * Add IPV6 item to matcher and to the value.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ * @param[in] group
+ * The group to insert the rule.
+ */
+static void
+flow_dv_translate_item_ipv6(void *matcher, void *key,
+ const struct rte_flow_item *item,
+ int inner, uint32_t group)
+{
+ const struct rte_flow_item_ipv6 *ipv6_m = item->mask;
+ const struct rte_flow_item_ipv6 *ipv6_v = item->spec;
+ const struct rte_flow_item_ipv6 nic_mask = {
+ .hdr = {
+ .src_addr =
+ "\xff\xff\xff\xff\xff\xff\xff\xff"
+ "\xff\xff\xff\xff\xff\xff\xff\xff",
+ .dst_addr =
+ "\xff\xff\xff\xff\xff\xff\xff\xff"
+ "\xff\xff\xff\xff\xff\xff\xff\xff",
+ .vtc_flow = RTE_BE32(0xffffffff),
+ .proto = 0xff,
+ .hop_limits = 0xff,
+ },
+ };
+ void *headers_m;
+ void *headers_v;
+ void *misc_m = MLX5_ADDR_OF(fte_match_param, matcher, misc_parameters);
+ void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
+ char *l24_m;
+ char *l24_v;
+ uint32_t vtc_m;
+ uint32_t vtc_v;
+ int i;
+ int size;
+
+ if (inner) {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ inner_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
+ } else {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ outer_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
+ }
+ if (group == 0)
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_version, 0xf);
+ else
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_version, 0x6);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_version, 6);
+ if (!ipv6_v)
+ return;
+ if (!ipv6_m)
+ ipv6_m = &nic_mask;
+ size = sizeof(ipv6_m->hdr.dst_addr);
+ l24_m = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_m,
+ dst_ipv4_dst_ipv6.ipv6_layout.ipv6);
+ l24_v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v,
+ dst_ipv4_dst_ipv6.ipv6_layout.ipv6);
+ memcpy(l24_m, ipv6_m->hdr.dst_addr, size);
+ for (i = 0; i < size; ++i)
+ l24_v[i] = l24_m[i] & ipv6_v->hdr.dst_addr[i];
+ l24_m = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_m,
+ src_ipv4_src_ipv6.ipv6_layout.ipv6);
+ l24_v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v,
+ src_ipv4_src_ipv6.ipv6_layout.ipv6);
+ memcpy(l24_m, ipv6_m->hdr.src_addr, size);
+ for (i = 0; i < size; ++i)
+ l24_v[i] = l24_m[i] & ipv6_v->hdr.src_addr[i];
+ /* TOS. */
+ vtc_m = rte_be_to_cpu_32(ipv6_m->hdr.vtc_flow);
+ vtc_v = rte_be_to_cpu_32(ipv6_m->hdr.vtc_flow & ipv6_v->hdr.vtc_flow);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_ecn, vtc_m >> 20);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_ecn, vtc_v >> 20);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_dscp, vtc_m >> 22);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_dscp, vtc_v >> 22);
+ /* Label. */
+ if (inner) {
+ MLX5_SET(fte_match_set_misc, misc_m, inner_ipv6_flow_label,
+ vtc_m);
+ MLX5_SET(fte_match_set_misc, misc_v, inner_ipv6_flow_label,
+ vtc_v);
+ } else {
+ MLX5_SET(fte_match_set_misc, misc_m, outer_ipv6_flow_label,
+ vtc_m);
+ MLX5_SET(fte_match_set_misc, misc_v, outer_ipv6_flow_label,
+ vtc_v);
+ }
+ /* Protocol. */
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_protocol,
+ ipv6_m->hdr.proto);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol,
+ ipv6_v->hdr.proto & ipv6_m->hdr.proto);
+}
+
+/**
+ * Add TCP item to matcher and to the value.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ */
+static void
+flow_dv_translate_item_tcp(void *matcher, void *key,
+ const struct rte_flow_item *item,
+ int inner)
+{
+ const struct rte_flow_item_tcp *tcp_m = item->mask;
+ const struct rte_flow_item_tcp *tcp_v = item->spec;
+ void *headers_m;
+ void *headers_v;
+
+ if (inner) {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ inner_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
+ } else {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ outer_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
+ }
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_protocol, 0xff);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol, IPPROTO_TCP);
+ if (!tcp_v)
+ return;
+ if (!tcp_m)
+ tcp_m = &rte_flow_item_tcp_mask;
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, tcp_sport,
+ rte_be_to_cpu_16(tcp_m->hdr.src_port));
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, tcp_sport,
+ rte_be_to_cpu_16(tcp_v->hdr.src_port & tcp_m->hdr.src_port));
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, tcp_dport,
+ rte_be_to_cpu_16(tcp_m->hdr.dst_port));
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, tcp_dport,
+ rte_be_to_cpu_16(tcp_v->hdr.dst_port & tcp_m->hdr.dst_port));
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, tcp_flags,
+ tcp_m->hdr.tcp_flags);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, tcp_flags,
+ (tcp_v->hdr.tcp_flags & tcp_m->hdr.tcp_flags));
+}
+
+/**
+ * Add UDP item to matcher and to the value.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ */
+static void
+flow_dv_translate_item_udp(void *matcher, void *key,
+ const struct rte_flow_item *item,
+ int inner)
+{
+ const struct rte_flow_item_udp *udp_m = item->mask;
+ const struct rte_flow_item_udp *udp_v = item->spec;
+ void *headers_m;
+ void *headers_v;
+
+ if (inner) {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ inner_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
+ } else {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ outer_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
+ }
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_protocol, 0xff);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol, IPPROTO_UDP);
+ if (!udp_v)
+ return;
+ if (!udp_m)
+ udp_m = &rte_flow_item_udp_mask;
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, udp_sport,
+ rte_be_to_cpu_16(udp_m->hdr.src_port));
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, udp_sport,
+ rte_be_to_cpu_16(udp_v->hdr.src_port & udp_m->hdr.src_port));
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, udp_dport,
+ rte_be_to_cpu_16(udp_m->hdr.dst_port));
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, udp_dport,
+ rte_be_to_cpu_16(udp_v->hdr.dst_port & udp_m->hdr.dst_port));
+}
+
+/**
+ * Add GRE optional Key item to matcher and to the value.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ */
+static void
+flow_dv_translate_item_gre_key(void *matcher, void *key,
+ const struct rte_flow_item *item)
+{
+ const rte_be32_t *key_m = item->mask;
+ const rte_be32_t *key_v = item->spec;
+ void *misc_m = MLX5_ADDR_OF(fte_match_param, matcher, misc_parameters);
+ void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
+ rte_be32_t gre_key_default_mask = RTE_BE32(UINT32_MAX);
+
+ if (!key_v)
+ return;
+ if (!key_m)
+ key_m = &gre_key_default_mask;
+ /* GRE K bit must be on and should already be validated */
+ MLX5_SET(fte_match_set_misc, misc_m, gre_k_present, 1);
+ MLX5_SET(fte_match_set_misc, misc_v, gre_k_present, 1);
+ MLX5_SET(fte_match_set_misc, misc_m, gre_key_h,
+ rte_be_to_cpu_32(*key_m) >> 8);
+ MLX5_SET(fte_match_set_misc, misc_v, gre_key_h,
+ rte_be_to_cpu_32((*key_v) & (*key_m)) >> 8);
+ MLX5_SET(fte_match_set_misc, misc_m, gre_key_l,
+ rte_be_to_cpu_32(*key_m) & 0xFF);
+ MLX5_SET(fte_match_set_misc, misc_v, gre_key_l,
+ rte_be_to_cpu_32((*key_v) & (*key_m)) & 0xFF);
+}
+
+/**
+ * Add GRE item to matcher and to the value.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ */
+static void
+flow_dv_translate_item_gre(void *matcher, void *key,
+ const struct rte_flow_item *item,
+ int inner)
+{
+ const struct rte_flow_item_gre *gre_m = item->mask;
+ const struct rte_flow_item_gre *gre_v = item->spec;
+ void *headers_m;
+ void *headers_v;
+ void *misc_m = MLX5_ADDR_OF(fte_match_param, matcher, misc_parameters);
+ void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
+ struct {
+ union {
+ __extension__
+ struct {
+ uint16_t version:3;
+ uint16_t rsvd0:9;
+ uint16_t s_present:1;
+ uint16_t k_present:1;
+ uint16_t rsvd_bit1:1;
+ uint16_t c_present:1;
+ };
+ uint16_t value;
+ };
+ } gre_crks_rsvd0_ver_m, gre_crks_rsvd0_ver_v;
+
+ if (inner) {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ inner_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
+ } else {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ outer_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
+ }
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_protocol, 0xff);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol, IPPROTO_GRE);
+ if (!gre_v)
+ return;
+ if (!gre_m)
+ gre_m = &rte_flow_item_gre_mask;
+ MLX5_SET(fte_match_set_misc, misc_m, gre_protocol,
+ rte_be_to_cpu_16(gre_m->protocol));
+ MLX5_SET(fte_match_set_misc, misc_v, gre_protocol,
+ rte_be_to_cpu_16(gre_v->protocol & gre_m->protocol));
+ gre_crks_rsvd0_ver_m.value = rte_be_to_cpu_16(gre_m->c_rsvd0_ver);
+ gre_crks_rsvd0_ver_v.value = rte_be_to_cpu_16(gre_v->c_rsvd0_ver);
+ MLX5_SET(fte_match_set_misc, misc_m, gre_c_present,
+ gre_crks_rsvd0_ver_m.c_present);
+ MLX5_SET(fte_match_set_misc, misc_v, gre_c_present,
+ gre_crks_rsvd0_ver_v.c_present &
+ gre_crks_rsvd0_ver_m.c_present);
+ MLX5_SET(fte_match_set_misc, misc_m, gre_k_present,
+ gre_crks_rsvd0_ver_m.k_present);
+ MLX5_SET(fte_match_set_misc, misc_v, gre_k_present,
+ gre_crks_rsvd0_ver_v.k_present &
+ gre_crks_rsvd0_ver_m.k_present);
+ MLX5_SET(fte_match_set_misc, misc_m, gre_s_present,
+ gre_crks_rsvd0_ver_m.s_present);
+ MLX5_SET(fte_match_set_misc, misc_v, gre_s_present,
+ gre_crks_rsvd0_ver_v.s_present &
+ gre_crks_rsvd0_ver_m.s_present);
+}
+
+/**
+ * Add NVGRE item to matcher and to the value.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ */
+static void
+flow_dv_translate_item_nvgre(void *matcher, void *key,
+ const struct rte_flow_item *item,
+ int inner)
+{
+ const struct rte_flow_item_nvgre *nvgre_m = item->mask;
+ const struct rte_flow_item_nvgre *nvgre_v = item->spec;
+ void *misc_m = MLX5_ADDR_OF(fte_match_param, matcher, misc_parameters);
+ void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
+ const char *tni_flow_id_m = (const char *)nvgre_m->tni;
+ const char *tni_flow_id_v = (const char *)nvgre_v->tni;
+ char *gre_key_m;
+ char *gre_key_v;
+ int size;
+ int i;
+
+ /* For NVGRE, GRE header fields must be set with defined values. */
+ const struct rte_flow_item_gre gre_spec = {
+ .c_rsvd0_ver = RTE_BE16(0x2000),
+ .protocol = RTE_BE16(RTE_ETHER_TYPE_TEB)
+ };
+ const struct rte_flow_item_gre gre_mask = {
+ .c_rsvd0_ver = RTE_BE16(0xB000),
+ .protocol = RTE_BE16(UINT16_MAX),
+ };
+ const struct rte_flow_item gre_item = {
+ .spec = &gre_spec,
+ .mask = &gre_mask,
+ .last = NULL,
+ };
+ flow_dv_translate_item_gre(matcher, key, &gre_item, inner);
+ if (!nvgre_v)
+ return;
+ if (!nvgre_m)
+ nvgre_m = &rte_flow_item_nvgre_mask;
+ size = sizeof(nvgre_m->tni) + sizeof(nvgre_m->flow_id);
+ gre_key_m = MLX5_ADDR_OF(fte_match_set_misc, misc_m, gre_key_h);
+ gre_key_v = MLX5_ADDR_OF(fte_match_set_misc, misc_v, gre_key_h);
+ memcpy(gre_key_m, tni_flow_id_m, size);
+ for (i = 0; i < size; ++i)
+ gre_key_v[i] = gre_key_m[i] & tni_flow_id_v[i];
+}
+
+/**
+ * Add VXLAN item to matcher and to the value.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ */
+static void
+flow_dv_translate_item_vxlan(void *matcher, void *key,
+ const struct rte_flow_item *item,
+ int inner)
+{
+ const struct rte_flow_item_vxlan *vxlan_m = item->mask;
+ const struct rte_flow_item_vxlan *vxlan_v = item->spec;
+ void *headers_m;
+ void *headers_v;
+ void *misc_m = MLX5_ADDR_OF(fte_match_param, matcher, misc_parameters);
+ void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
+ char *vni_m;
+ char *vni_v;
+ uint16_t dport;
+ int size;
+ int i;
+
+ if (inner) {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ inner_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
+ } else {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ outer_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
+ }
+ dport = item->type == RTE_FLOW_ITEM_TYPE_VXLAN ?
+ MLX5_UDP_PORT_VXLAN : MLX5_UDP_PORT_VXLAN_GPE;
+ if (!MLX5_GET16(fte_match_set_lyr_2_4, headers_v, udp_dport)) {
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, udp_dport, 0xFFFF);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, udp_dport, dport);
+ }
+ if (!vxlan_v)
+ return;
+ if (!vxlan_m)
+ vxlan_m = &rte_flow_item_vxlan_mask;
+ size = sizeof(vxlan_m->vni);
+ vni_m = MLX5_ADDR_OF(fte_match_set_misc, misc_m, vxlan_vni);
+ vni_v = MLX5_ADDR_OF(fte_match_set_misc, misc_v, vxlan_vni);
+ memcpy(vni_m, vxlan_m->vni, size);
+ for (i = 0; i < size; ++i)
+ vni_v[i] = vni_m[i] & vxlan_v->vni[i];
+}
+
+/**
+ * Add Geneve item to matcher and to the value.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ */
+
+static void
+flow_dv_translate_item_geneve(void *matcher, void *key,
+ const struct rte_flow_item *item, int inner)
+{
+ const struct rte_flow_item_geneve *geneve_m = item->mask;
+ const struct rte_flow_item_geneve *geneve_v = item->spec;
+ void *headers_m;
+ void *headers_v;
+ void *misc_m = MLX5_ADDR_OF(fte_match_param, matcher, misc_parameters);
+ void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
+ uint16_t dport;
+ uint16_t gbhdr_m;
+ uint16_t gbhdr_v;
+ char *vni_m;
+ char *vni_v;
+ size_t size, i;
+
+ if (inner) {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ inner_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
+ } else {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ outer_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
+ }
+ dport = MLX5_UDP_PORT_GENEVE;
+ if (!MLX5_GET16(fte_match_set_lyr_2_4, headers_v, udp_dport)) {
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, udp_dport, 0xFFFF);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, udp_dport, dport);
+ }
+ if (!geneve_v)
+ return;
+ if (!geneve_m)
+ geneve_m = &rte_flow_item_geneve_mask;
+ size = sizeof(geneve_m->vni);
+ vni_m = MLX5_ADDR_OF(fte_match_set_misc, misc_m, geneve_vni);
+ vni_v = MLX5_ADDR_OF(fte_match_set_misc, misc_v, geneve_vni);
+ memcpy(vni_m, geneve_m->vni, size);
+ for (i = 0; i < size; ++i)
+ vni_v[i] = vni_m[i] & geneve_v->vni[i];
+ MLX5_SET(fte_match_set_misc, misc_m, geneve_protocol_type,
+ rte_be_to_cpu_16(geneve_m->protocol));
+ MLX5_SET(fte_match_set_misc, misc_v, geneve_protocol_type,
+ rte_be_to_cpu_16(geneve_v->protocol & geneve_m->protocol));
+ gbhdr_m = rte_be_to_cpu_16(geneve_m->ver_opt_len_o_c_rsvd0);
+ gbhdr_v = rte_be_to_cpu_16(geneve_v->ver_opt_len_o_c_rsvd0);
+ MLX5_SET(fte_match_set_misc, misc_m, geneve_oam,
+ MLX5_GENEVE_OAMF_VAL(gbhdr_m));
+ MLX5_SET(fte_match_set_misc, misc_v, geneve_oam,
+ MLX5_GENEVE_OAMF_VAL(gbhdr_v) & MLX5_GENEVE_OAMF_VAL(gbhdr_m));
+ MLX5_SET(fte_match_set_misc, misc_m, geneve_opt_len,
+ MLX5_GENEVE_OPTLEN_VAL(gbhdr_m));
+ MLX5_SET(fte_match_set_misc, misc_v, geneve_opt_len,
+ MLX5_GENEVE_OPTLEN_VAL(gbhdr_v) &
+ MLX5_GENEVE_OPTLEN_VAL(gbhdr_m));
+}
+
+/**
+ * Add MPLS item to matcher and to the value.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] prev_layer
+ * The protocol layer indicated in previous item.
+ * @param[in] inner
+ * Item is inner pattern.
+ */
+static void
+flow_dv_translate_item_mpls(void *matcher, void *key,
+ const struct rte_flow_item *item,
+ uint64_t prev_layer,
+ int inner)
+{
+ const uint32_t *in_mpls_m = item->mask;
+ const uint32_t *in_mpls_v = item->spec;
+ uint32_t *out_mpls_m = 0;
+ uint32_t *out_mpls_v = 0;
+ void *misc_m = MLX5_ADDR_OF(fte_match_param, matcher, misc_parameters);
+ void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
+ void *misc2_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ misc_parameters_2);
+ void *misc2_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_2);
+ void *headers_m = MLX5_ADDR_OF(fte_match_param, matcher, outer_headers);
+ void *headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
+
+ switch (prev_layer) {
+ case MLX5_FLOW_LAYER_OUTER_L4_UDP:
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, udp_dport, 0xffff);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, udp_dport,
+ MLX5_UDP_PORT_MPLS);
+ break;
+ case MLX5_FLOW_LAYER_GRE:
+ MLX5_SET(fte_match_set_misc, misc_m, gre_protocol, 0xffff);
+ MLX5_SET(fte_match_set_misc, misc_v, gre_protocol,
+ RTE_ETHER_TYPE_MPLS);
+ break;
+ default:
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_protocol, 0xff);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol,
+ IPPROTO_MPLS);
+ break;
+ }
+ if (!in_mpls_v)
+ return;
+ if (!in_mpls_m)
+ in_mpls_m = (const uint32_t *)&rte_flow_item_mpls_mask;
+ switch (prev_layer) {
+ case MLX5_FLOW_LAYER_OUTER_L4_UDP:
+ out_mpls_m =
+ (uint32_t *)MLX5_ADDR_OF(fte_match_set_misc2, misc2_m,
+ outer_first_mpls_over_udp);
+ out_mpls_v =
+ (uint32_t *)MLX5_ADDR_OF(fte_match_set_misc2, misc2_v,
+ outer_first_mpls_over_udp);
+ break;
+ case MLX5_FLOW_LAYER_GRE:
+ out_mpls_m =
+ (uint32_t *)MLX5_ADDR_OF(fte_match_set_misc2, misc2_m,
+ outer_first_mpls_over_gre);
+ out_mpls_v =
+ (uint32_t *)MLX5_ADDR_OF(fte_match_set_misc2, misc2_v,
+ outer_first_mpls_over_gre);
+ break;
+ default:
+ /* Inner MPLS not over GRE is not supported. */
+ if (!inner) {
+ out_mpls_m =
+ (uint32_t *)MLX5_ADDR_OF(fte_match_set_misc2,
+ misc2_m,
+ outer_first_mpls);
+ out_mpls_v =
+ (uint32_t *)MLX5_ADDR_OF(fte_match_set_misc2,
+ misc2_v,
+ outer_first_mpls);
+ }
+ break;
+ }
+ if (out_mpls_m && out_mpls_v) {
+ *out_mpls_m = *in_mpls_m;
+ *out_mpls_v = *in_mpls_v & *in_mpls_m;
+ }
+}
+
+/**
+ * Add metadata register item to matcher
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] reg_type
+ * Type of device metadata register
+ * @param[in] value
+ * Register value
+ * @param[in] mask
+ * Register mask
+ */
+static void
+flow_dv_match_meta_reg(void *matcher, void *key,
+ enum modify_reg reg_type,
+ uint32_t data, uint32_t mask)
+{
+ void *misc2_m =
+ MLX5_ADDR_OF(fte_match_param, matcher, misc_parameters_2);
+ void *misc2_v =
+ MLX5_ADDR_OF(fte_match_param, key, misc_parameters_2);
+ uint32_t temp;
+
+ data &= mask;
+ switch (reg_type) {
+ case REG_A:
+ MLX5_SET(fte_match_set_misc2, misc2_m, metadata_reg_a, mask);
+ MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_a, data);
+ break;
+ case REG_B:
+ MLX5_SET(fte_match_set_misc2, misc2_m, metadata_reg_b, mask);
+ MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_b, data);
+ break;
+ case REG_C_0:
+ /*
+ * The metadata register C0 field might be divided into
+ * source vport index and META item value, we should set
+ * this field according to specified mask, not as whole one.
+ */
+ temp = MLX5_GET(fte_match_set_misc2, misc2_m, metadata_reg_c_0);
+ temp |= mask;
+ MLX5_SET(fte_match_set_misc2, misc2_m, metadata_reg_c_0, temp);
+ temp = MLX5_GET(fte_match_set_misc2, misc2_v, metadata_reg_c_0);
+ temp &= ~mask;
+ temp |= data;
+ MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_c_0, temp);
+ break;
+ case REG_C_1:
+ MLX5_SET(fte_match_set_misc2, misc2_m, metadata_reg_c_1, mask);
+ MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_c_1, data);
+ break;
+ case REG_C_2:
+ MLX5_SET(fte_match_set_misc2, misc2_m, metadata_reg_c_2, mask);
+ MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_c_2, data);
+ break;
+ case REG_C_3:
+ MLX5_SET(fte_match_set_misc2, misc2_m, metadata_reg_c_3, mask);
+ MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_c_3, data);
+ break;
+ case REG_C_4:
+ MLX5_SET(fte_match_set_misc2, misc2_m, metadata_reg_c_4, mask);
+ MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_c_4, data);
+ break;
+ case REG_C_5:
+ MLX5_SET(fte_match_set_misc2, misc2_m, metadata_reg_c_5, mask);
+ MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_c_5, data);
+ break;
+ case REG_C_6:
+ MLX5_SET(fte_match_set_misc2, misc2_m, metadata_reg_c_6, mask);
+ MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_c_6, data);
+ break;
+ case REG_C_7:
+ MLX5_SET(fte_match_set_misc2, misc2_m, metadata_reg_c_7, mask);
+ MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_c_7, data);
+ break;
+ default:
+ assert(false);
+ break;
+ }
+}
+
+/**
+ * Add MARK item to matcher
+ *
+ * @param[in] dev
+ * The device to configure through.
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ */
+static void
+flow_dv_translate_item_mark(struct rte_eth_dev *dev,
+ void *matcher, void *key,
+ const struct rte_flow_item *item)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ const struct rte_flow_item_mark *mark;
+ uint32_t value;
+ uint32_t mask;
+
+ mark = item->mask ? (const void *)item->mask :
+ &rte_flow_item_mark_mask;
+ mask = mark->id & priv->sh->dv_mark_mask;
+ mark = (const void *)item->spec;
+ assert(mark);
+ value = mark->id & priv->sh->dv_mark_mask & mask;
+ if (mask) {
+ enum modify_reg reg;
+
+ /* Get the metadata register index for the mark. */
+ reg = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK, 0, NULL);
+ assert(reg > 0);
+ if (reg == REG_C_0) {
+ struct mlx5_priv *priv = dev->data->dev_private;
+ uint32_t msk_c0 = priv->sh->dv_regc0_mask;
+ uint32_t shl_c0 = rte_bsf32(msk_c0);
+
+ mask &= msk_c0;
+ mask <<= shl_c0;
+ value <<= shl_c0;
+ }
+ flow_dv_match_meta_reg(matcher, key, reg, value, mask);
+ }
+}
+
+/**
+ * Add META item to matcher
+ *
+ * @param[in] dev
+ * The devich to configure through.
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] attr
+ * Attributes of flow that includes this item.
+ * @param[in] item
+ * Flow pattern to translate.
+ */
+static void
+flow_dv_translate_item_meta(struct rte_eth_dev *dev,
+ void *matcher, void *key,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item *item)
+{
+ const struct rte_flow_item_meta *meta_m;
+ const struct rte_flow_item_meta *meta_v;
+
+ meta_m = (const void *)item->mask;
+ if (!meta_m)
+ meta_m = &rte_flow_item_meta_mask;
+ meta_v = (const void *)item->spec;
+ if (meta_v) {
+ int reg;
+ uint32_t value = meta_v->data;
+ uint32_t mask = meta_m->data;
+
+ reg = flow_dv_get_metadata_reg(dev, attr, NULL);
+ if (reg < 0)
+ return;
+ /*
+ * In datapath code there is no endianness
+ * coversions for perfromance reasons, all
+ * pattern conversions are done in rte_flow.
+ */
+ value = rte_cpu_to_be_32(value);
+ mask = rte_cpu_to_be_32(mask);
+ if (reg == REG_C_0) {
+ struct mlx5_priv *priv = dev->data->dev_private;
+ uint32_t msk_c0 = priv->sh->dv_regc0_mask;
+ uint32_t shl_c0 = rte_bsf32(msk_c0);
+#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
+ uint32_t shr_c0 = __builtin_clz(priv->sh->dv_meta_mask);
+
+ value >>= shr_c0;
+ mask >>= shr_c0;
+#endif
+ value <<= shl_c0;
+ mask <<= shl_c0;
+ assert(msk_c0);
+ assert(!(~msk_c0 & mask));
+ }
+ flow_dv_match_meta_reg(matcher, key, reg, value, mask);
+ }
+}
+
+/**
+ * Add vport metadata Reg C0 item to matcher
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] reg
+ * Flow pattern to translate.
+ */
+static void
+flow_dv_translate_item_meta_vport(void *matcher, void *key,
+ uint32_t value, uint32_t mask)
+{
+ flow_dv_match_meta_reg(matcher, key, REG_C_0, value, mask);
+}
+
+/**
+ * Add tag item to matcher
+ *
+ * @param[in] dev
+ * The devich to configure through.
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ */
+static void
+flow_dv_translate_mlx5_item_tag(struct rte_eth_dev *dev,
+ void *matcher, void *key,
+ const struct rte_flow_item *item)
+{
+ const struct mlx5_rte_flow_item_tag *tag_v = item->spec;
+ const struct mlx5_rte_flow_item_tag *tag_m = item->mask;
+ uint32_t mask, value;
+
+ assert(tag_v);
+ value = tag_v->data;
+ mask = tag_m ? tag_m->data : UINT32_MAX;
+ if (tag_v->id == REG_C_0) {
+ struct mlx5_priv *priv = dev->data->dev_private;
+ uint32_t msk_c0 = priv->sh->dv_regc0_mask;
+ uint32_t shl_c0 = rte_bsf32(msk_c0);
+
+ mask &= msk_c0;
+ mask <<= shl_c0;
+ value <<= shl_c0;
+ }
+ flow_dv_match_meta_reg(matcher, key, tag_v->id, value, mask);
+}
+
+/**
+ * Add TAG item to matcher
+ *
+ * @param[in] dev
+ * The devich to configure through.
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ */
+static void
+flow_dv_translate_item_tag(struct rte_eth_dev *dev,
+ void *matcher, void *key,
+ const struct rte_flow_item *item)
+{
+ const struct rte_flow_item_tag *tag_v = item->spec;
+ const struct rte_flow_item_tag *tag_m = item->mask;
+ enum modify_reg reg;
+
+ assert(tag_v);
+ tag_m = tag_m ? tag_m : &rte_flow_item_tag_mask;
+ /* Get the metadata register index for the tag. */
+ reg = mlx5_flow_get_reg_id(dev, MLX5_APP_TAG, tag_v->index, NULL);
+ assert(reg > 0);
+ flow_dv_match_meta_reg(matcher, key, reg, tag_v->data, tag_m->data);
+}
+
+/**
+ * Add source vport match to the specified matcher.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] port
+ * Source vport value to match
+ * @param[in] mask
+ * Mask
+ */
+static void
+flow_dv_translate_item_source_vport(void *matcher, void *key,
+ int16_t port, uint16_t mask)
+{
+ void *misc_m = MLX5_ADDR_OF(fte_match_param, matcher, misc_parameters);
+ void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
+
+ MLX5_SET(fte_match_set_misc, misc_m, source_port, mask);
+ MLX5_SET(fte_match_set_misc, misc_v, source_port, port);
+}
+
+/**
+ * Translate port-id item to eswitch match on port-id.
+ *
+ * @param[in] dev
+ * The devich to configure through.
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise.
+ */
+static int
+flow_dv_translate_item_port_id(struct rte_eth_dev *dev, void *matcher,
+ void *key, const struct rte_flow_item *item)
+{
+ const struct rte_flow_item_port_id *pid_m = item ? item->mask : NULL;
+ const struct rte_flow_item_port_id *pid_v = item ? item->spec : NULL;
+ struct mlx5_priv *priv;
+ uint16_t mask, id;
+
+ mask = pid_m ? pid_m->id : 0xffff;
+ id = pid_v ? pid_v->id : dev->data->port_id;
+ priv = mlx5_port_to_eswitch_info(id, item == NULL);
+ if (!priv)
+ return -rte_errno;
+ /* Translate to vport field or to metadata, depending on mode. */
+ if (priv->vport_meta_mask)
+ flow_dv_translate_item_meta_vport(matcher, key,
+ priv->vport_meta_tag,
+ priv->vport_meta_mask);
+ else
+ flow_dv_translate_item_source_vport(matcher, key,
+ priv->vport_id, mask);
+ return 0;
+}
+
+/**
+ * Add ICMP6 item to matcher and to the value.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ */
+static void
+flow_dv_translate_item_icmp6(void *matcher, void *key,
+ const struct rte_flow_item *item,
+ int inner)
+{
+ const struct rte_flow_item_icmp6 *icmp6_m = item->mask;
+ const struct rte_flow_item_icmp6 *icmp6_v = item->spec;
+ void *headers_m;
+ void *headers_v;
+ void *misc3_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ misc_parameters_3);
+ void *misc3_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_3);
+ if (inner) {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ inner_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
+ } else {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ outer_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
+ }
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_protocol, 0xFF);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol, IPPROTO_ICMPV6);
+ if (!icmp6_v)
+ return;
+ if (!icmp6_m)
+ icmp6_m = &rte_flow_item_icmp6_mask;
+ MLX5_SET(fte_match_set_misc3, misc3_m, icmpv6_type, icmp6_m->type);
+ MLX5_SET(fte_match_set_misc3, misc3_v, icmpv6_type,
+ icmp6_v->type & icmp6_m->type);
+ MLX5_SET(fte_match_set_misc3, misc3_m, icmpv6_code, icmp6_m->code);
+ MLX5_SET(fte_match_set_misc3, misc3_v, icmpv6_code,
+ icmp6_v->code & icmp6_m->code);
+}
+
+/**
+ * Add ICMP item to matcher and to the value.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ */
+static void
+flow_dv_translate_item_icmp(void *matcher, void *key,
+ const struct rte_flow_item *item,
+ int inner)
+{
+ const struct rte_flow_item_icmp *icmp_m = item->mask;
+ const struct rte_flow_item_icmp *icmp_v = item->spec;
+ void *headers_m;
+ void *headers_v;
+ void *misc3_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ misc_parameters_3);
+ void *misc3_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_3);
+ if (inner) {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ inner_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
+ } else {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ outer_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
+ }
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_protocol, 0xFF);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol, IPPROTO_ICMP);
+ if (!icmp_v)
+ return;
+ if (!icmp_m)
+ icmp_m = &rte_flow_item_icmp_mask;
+ MLX5_SET(fte_match_set_misc3, misc3_m, icmp_type,
+ icmp_m->hdr.icmp_type);
+ MLX5_SET(fte_match_set_misc3, misc3_v, icmp_type,
+ icmp_v->hdr.icmp_type & icmp_m->hdr.icmp_type);
+ MLX5_SET(fte_match_set_misc3, misc3_m, icmp_code,
+ icmp_m->hdr.icmp_code);
+ MLX5_SET(fte_match_set_misc3, misc3_v, icmp_code,
+ icmp_v->hdr.icmp_code & icmp_m->hdr.icmp_code);
+}
+
+/**
+ * Add GTP item to matcher and to the value.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ */
+static void
+flow_dv_translate_item_gtp(void *matcher, void *key,
+ const struct rte_flow_item *item, int inner)
+{
+ const struct rte_flow_item_gtp *gtp_m = item->mask;
+ const struct rte_flow_item_gtp *gtp_v = item->spec;
+ void *headers_m;
+ void *headers_v;
+ void *misc3_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ misc_parameters_3);
+ void *misc3_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_3);
+ uint16_t dport = RTE_GTPU_UDP_PORT;
+
+ if (inner) {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ inner_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
+ } else {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ outer_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
+ }
+ if (!MLX5_GET16(fte_match_set_lyr_2_4, headers_v, udp_dport)) {
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, udp_dport, 0xFFFF);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, udp_dport, dport);
+ }
+ if (!gtp_v)
+ return;
+ if (!gtp_m)
+ gtp_m = &rte_flow_item_gtp_mask;
+ MLX5_SET(fte_match_set_misc3, misc3_m, gtpu_msg_type, gtp_m->msg_type);
+ MLX5_SET(fte_match_set_misc3, misc3_v, gtpu_msg_type,
+ gtp_v->msg_type & gtp_m->msg_type);
+ MLX5_SET(fte_match_set_misc3, misc3_m, gtpu_teid,
+ rte_be_to_cpu_32(gtp_m->teid));
+ MLX5_SET(fte_match_set_misc3, misc3_v, gtpu_teid,
+ rte_be_to_cpu_32(gtp_v->teid & gtp_m->teid));
+}
+
+static uint32_t matcher_zero[MLX5_ST_SZ_DW(fte_match_param)] = { 0 };
+
+#define HEADER_IS_ZERO(match_criteria, headers) \
+ !(memcmp(MLX5_ADDR_OF(fte_match_param, match_criteria, headers), \
+ matcher_zero, MLX5_FLD_SZ_BYTES(fte_match_param, headers))) \
+
+/**
+ * Calculate flow matcher enable bitmap.
+ *
+ * @param match_criteria
+ * Pointer to flow matcher criteria.
+ *
+ * @return
+ * Bitmap of enabled fields.
+ */
+static uint8_t
+flow_dv_matcher_enable(uint32_t *match_criteria)
+{
+ uint8_t match_criteria_enable;
+
+ match_criteria_enable =
+ (!HEADER_IS_ZERO(match_criteria, outer_headers)) <<
+ MLX5_MATCH_CRITERIA_ENABLE_OUTER_BIT;
+ match_criteria_enable |=
+ (!HEADER_IS_ZERO(match_criteria, misc_parameters)) <<
+ MLX5_MATCH_CRITERIA_ENABLE_MISC_BIT;
+ match_criteria_enable |=
+ (!HEADER_IS_ZERO(match_criteria, inner_headers)) <<
+ MLX5_MATCH_CRITERIA_ENABLE_INNER_BIT;
+ match_criteria_enable |=
+ (!HEADER_IS_ZERO(match_criteria, misc_parameters_2)) <<
+ MLX5_MATCH_CRITERIA_ENABLE_MISC2_BIT;
+ match_criteria_enable |=
+ (!HEADER_IS_ZERO(match_criteria, misc_parameters_3)) <<
+ MLX5_MATCH_CRITERIA_ENABLE_MISC3_BIT;
+ return match_criteria_enable;
+}
+
+
+/**
+ * Get a flow table.
+ *
+ * @param[in, out] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in] table_id
+ * Table id to use.
+ * @param[in] egress
+ * Direction of the table.
+ * @param[in] transfer
+ * E-Switch or NIC flow.
+ * @param[out] error
+ * pointer to error structure.
+ *
+ * @return
+ * Returns tables resource based on the index, NULL in case of failed.
+ */
+static struct mlx5_flow_tbl_resource *
+flow_dv_tbl_resource_get(struct rte_eth_dev *dev,
+ uint32_t table_id, uint8_t egress,
+ uint8_t transfer,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+ struct mlx5_flow_tbl_resource *tbl;
+ union mlx5_flow_tbl_key table_key = {
+ {
+ .table_id = table_id,
+ .reserved = 0,
+ .domain = !!transfer,
+ .direction = !!egress,
+ }
+ };
+ struct mlx5_hlist_entry *pos = mlx5_hlist_lookup(sh->flow_tbls,
+ table_key.v64);
+ struct mlx5_flow_tbl_data_entry *tbl_data;
+ int ret;
+ void *domain;
+
+ if (pos) {
+ tbl_data = container_of(pos, struct mlx5_flow_tbl_data_entry,
+ entry);
+ tbl = &tbl_data->tbl;
+ rte_atomic32_inc(&tbl->refcnt);
+ return tbl;
+ }
+ tbl_data = rte_zmalloc(NULL, sizeof(*tbl_data), 0);
+ if (!tbl_data) {
+ rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "cannot allocate flow table data entry");
+ return NULL;
+ }
+ tbl = &tbl_data->tbl;
+ pos = &tbl_data->entry;
+ if (transfer)
+ domain = sh->fdb_domain;
+ else if (egress)
+ domain = sh->tx_domain;
+ else
+ domain = sh->rx_domain;
+ tbl->obj = mlx5_glue->dr_create_flow_tbl(domain, table_id);
+ if (!tbl->obj) {
+ rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, "cannot create flow table object");
+ rte_free(tbl_data);
+ return NULL;
+ }
+ /*
+ * No multi-threads now, but still better to initialize the reference
+ * count before insert it into the hash list.
+ */
+ rte_atomic32_init(&tbl->refcnt);
+ /* Jump action reference count is initialized here. */
+ rte_atomic32_init(&tbl_data->jump.refcnt);
+ pos->key = table_key.v64;
+ ret = mlx5_hlist_insert(sh->flow_tbls, pos);
+ if (ret < 0) {
+ rte_flow_error_set(error, -ret,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "cannot insert flow table data entry");
+ mlx5_glue->dr_destroy_flow_tbl(tbl->obj);
+ rte_free(tbl_data);
+ }
+ rte_atomic32_inc(&tbl->refcnt);
+ return tbl;
+}
+
+/**
+ * Release a flow table.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in] tbl
+ * Table resource to be released.
+ *
+ * @return
+ * Returns 0 if table was released, else return 1;
+ */
+static int
+flow_dv_tbl_resource_release(struct rte_eth_dev *dev,
+ struct mlx5_flow_tbl_resource *tbl)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+ struct mlx5_flow_tbl_data_entry *tbl_data =
+ container_of(tbl, struct mlx5_flow_tbl_data_entry, tbl);
+
+ if (!tbl)
+ return 0;
+ if (rte_atomic32_dec_and_test(&tbl->refcnt)) {
+ struct mlx5_hlist_entry *pos = &tbl_data->entry;
+
+ mlx5_glue->dr_destroy_flow_tbl(tbl->obj);
+ tbl->obj = NULL;
+ /* remove the entry from the hash list and free memory. */
+ mlx5_hlist_remove(sh->flow_tbls, pos);
+ rte_free(tbl_data);
+ return 0;
+ }
+ return 1;
+}
+
+/**
+ * Register the flow matcher.
+ *
+ * @param[in, out] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in, out] matcher
+ * Pointer to flow matcher.
+ * @param[in, out] key
+ * Pointer to flow table key.
+ * @parm[in, out] dev_flow
+ * Pointer to the dev_flow.
+ * @param[out] error
+ * pointer to error structure.
+ *
+ * @return
+ * 0 on success otherwise -errno and errno is set.
+ */
+static int
+flow_dv_matcher_register(struct rte_eth_dev *dev,
+ struct mlx5_flow_dv_matcher *matcher,
+ union mlx5_flow_tbl_key *key,
+ struct mlx5_flow *dev_flow,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+ struct mlx5_flow_dv_matcher *cache_matcher;
+ struct mlx5dv_flow_matcher_attr dv_attr = {
+ .type = IBV_FLOW_ATTR_NORMAL,
+ .match_mask = (void *)&matcher->mask,
+ };
+ struct mlx5_flow_tbl_resource *tbl;
+ struct mlx5_flow_tbl_data_entry *tbl_data;
+
+ tbl = flow_dv_tbl_resource_get(dev, key->table_id, key->direction,
+ key->domain, error);
+ if (!tbl)
+ return -rte_errno; /* No need to refill the error info */
+ tbl_data = container_of(tbl, struct mlx5_flow_tbl_data_entry, tbl);
+ /* Lookup from cache. */
+ LIST_FOREACH(cache_matcher, &tbl_data->matchers, next) {
+ if (matcher->crc == cache_matcher->crc &&
+ matcher->priority == cache_matcher->priority &&
+ !memcmp((const void *)matcher->mask.buf,
+ (const void *)cache_matcher->mask.buf,
+ cache_matcher->mask.size)) {
+ DRV_LOG(DEBUG,
+ "%s group %u priority %hd use %s "
+ "matcher %p: refcnt %d++",
+ key->domain ? "FDB" : "NIC", key->table_id,
+ cache_matcher->priority,
+ key->direction ? "tx" : "rx",
+ (void *)cache_matcher,
+ rte_atomic32_read(&cache_matcher->refcnt));
+ rte_atomic32_inc(&cache_matcher->refcnt);
+ dev_flow->dv.matcher = cache_matcher;
+ /* old matcher should not make the table ref++. */
+ flow_dv_tbl_resource_release(dev, tbl);
+ return 0;
+ }
+ }
+ /* Register new matcher. */
+ cache_matcher = rte_calloc(__func__, 1, sizeof(*cache_matcher), 0);
+ if (!cache_matcher) {
+ flow_dv_tbl_resource_release(dev, tbl);
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "cannot allocate matcher memory");
+ }
+ *cache_matcher = *matcher;
+ dv_attr.match_criteria_enable =
+ flow_dv_matcher_enable(cache_matcher->mask.buf);
+ dv_attr.priority = matcher->priority;
+ if (key->direction)
+ dv_attr.flags |= IBV_FLOW_ATTR_FLAGS_EGRESS;
+ cache_matcher->matcher_object =
+ mlx5_glue->dv_create_flow_matcher(sh->ctx, &dv_attr, tbl->obj);
+ if (!cache_matcher->matcher_object) {
+ rte_free(cache_matcher);
+#ifdef HAVE_MLX5DV_DR
+ flow_dv_tbl_resource_release(dev, tbl);
+#endif
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, "cannot create matcher");
+ }
+ /* Save the table information */
+ cache_matcher->tbl = tbl;
+ rte_atomic32_init(&cache_matcher->refcnt);
+ /* only matcher ref++, table ref++ already done above in get API. */
+ rte_atomic32_inc(&cache_matcher->refcnt);
+ LIST_INSERT_HEAD(&tbl_data->matchers, cache_matcher, next);
+ dev_flow->dv.matcher = cache_matcher;
+ DRV_LOG(DEBUG, "%s group %u priority %hd new %s matcher %p: refcnt %d",
+ key->domain ? "FDB" : "NIC", key->table_id,
+ cache_matcher->priority,
+ key->direction ? "tx" : "rx", (void *)cache_matcher,
+ rte_atomic32_read(&cache_matcher->refcnt));
+ return 0;
+}
+
+/**
+ * Find existing tag resource or create and register a new one.
+ *
+ * @param dev[in, out]
+ * Pointer to rte_eth_dev structure.
+ * @param[in, out] tag_be24
+ * Tag value in big endian then R-shift 8.
+ * @parm[in, out] dev_flow
+ * Pointer to the dev_flow.
+ * @param[out] error
+ * pointer to error structure.
+ *
+ * @return
+ * 0 on success otherwise -errno and errno is set.
+ */
+static int
+flow_dv_tag_resource_register
+ (struct rte_eth_dev *dev,
+ uint32_t tag_be24,
+ struct mlx5_flow *dev_flow,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+ struct mlx5_flow_dv_tag_resource *cache_resource;
+ struct mlx5_hlist_entry *entry;
+
+ /* Lookup a matching resource from cache. */
+ entry = mlx5_hlist_lookup(sh->tag_table, (uint64_t)tag_be24);
+ if (entry) {
+ cache_resource = container_of
+ (entry, struct mlx5_flow_dv_tag_resource, entry);
+ rte_atomic32_inc(&cache_resource->refcnt);
+ dev_flow->dv.tag_resource = cache_resource;
+ DRV_LOG(DEBUG, "cached tag resource %p: refcnt now %d++",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ return 0;
+ }
+ /* Register new resource. */
+ cache_resource = rte_calloc(__func__, 1, sizeof(*cache_resource), 0);
+ if (!cache_resource)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "cannot allocate resource memory");
+ cache_resource->entry.key = (uint64_t)tag_be24;
+ cache_resource->action = mlx5_glue->dv_create_flow_action_tag(tag_be24);
+ if (!cache_resource->action) {
+ rte_free(cache_resource);
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, "cannot create action");
+ }
+ rte_atomic32_init(&cache_resource->refcnt);
+ rte_atomic32_inc(&cache_resource->refcnt);
+ if (mlx5_hlist_insert(sh->tag_table, &cache_resource->entry)) {
+ mlx5_glue->destroy_flow_action(cache_resource->action);
+ rte_free(cache_resource);
+ return rte_flow_error_set(error, EEXIST,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL, "cannot insert tag");
+ }
+ dev_flow->dv.tag_resource = cache_resource;
+ DRV_LOG(DEBUG, "new tag resource %p: refcnt now %d++",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ return 0;
+}
+
+/**
+ * Release the tag.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param flow
+ * Pointer to mlx5_flow.
+ *
+ * @return
+ * 1 while a reference on it exists, 0 when freed.
+ */
+static int
+flow_dv_tag_release(struct rte_eth_dev *dev,
+ struct mlx5_flow_dv_tag_resource *tag)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_ibv_shared *sh = priv->sh;
+
+ assert(tag);
+ DRV_LOG(DEBUG, "port %u tag %p: refcnt %d--",
+ dev->data->port_id, (void *)tag,
+ rte_atomic32_read(&tag->refcnt));
+ if (rte_atomic32_dec_and_test(&tag->refcnt)) {
+ claim_zero(mlx5_glue->destroy_flow_action(tag->action));
+ mlx5_hlist_remove(sh->tag_table, &tag->entry);
+ DRV_LOG(DEBUG, "port %u tag %p: removed",
+ dev->data->port_id, (void *)tag);
+ rte_free(tag);
+ return 0;
+ }
+ return 1;
+}
+
+/**
+ * Translate port ID action to vport.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in] action
+ * Pointer to the port ID action.
+ * @param[out] dst_port_id
+ * The target port ID.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_translate_action_port_id(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ uint32_t *dst_port_id,
+ struct rte_flow_error *error)
+{
+ uint32_t port;
+ struct mlx5_priv *priv;
+ const struct rte_flow_action_port_id *conf =
+ (const struct rte_flow_action_port_id *)action->conf;
+
+ port = conf->original ? dev->data->port_id : conf->id;
+ priv = mlx5_port_to_eswitch_info(port, false);
+ if (!priv)
+ return rte_flow_error_set(error, -rte_errno,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "No eswitch info was found for port");
+#ifdef HAVE_MLX5DV_DR_DEVX_PORT
+ /*
+ * This parameter is transferred to
+ * mlx5dv_dr_action_create_dest_ib_port().
+ */
+ *dst_port_id = priv->ibv_port;
+#else
+ /*
+ * Legacy mode, no LAG configurations is supported.
+ * This parameter is transferred to
+ * mlx5dv_dr_action_create_dest_vport().
+ */
+ *dst_port_id = priv->vport_id;
+#endif
+ return 0;
+}
+
+/**
+ * Add Tx queue matcher
+ *
+ * @param[in] dev
+ * Pointer to the dev struct.
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ */
+static void
+flow_dv_translate_item_tx_queue(struct rte_eth_dev *dev,
+ void *matcher, void *key,
+ const struct rte_flow_item *item)
+{
+ const struct mlx5_rte_flow_item_tx_queue *queue_m;
+ const struct mlx5_rte_flow_item_tx_queue *queue_v;
+ void *misc_m =
+ MLX5_ADDR_OF(fte_match_param, matcher, misc_parameters);
+ void *misc_v =
+ MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
+ struct mlx5_txq_ctrl *txq;
+ uint32_t queue;
+
+
+ queue_m = (const void *)item->mask;
+ if (!queue_m)
+ return;
+ queue_v = (const void *)item->spec;
+ if (!queue_v)
+ return;
+ txq = mlx5_txq_get(dev, queue_v->queue);
+ if (!txq)
+ return;
+ queue = txq->obj->sq->id;
+ MLX5_SET(fte_match_set_misc, misc_m, source_sqn, queue_m->queue);
+ MLX5_SET(fte_match_set_misc, misc_v, source_sqn,
+ queue & queue_m->queue);
+ mlx5_txq_release(dev, queue_v->queue);
+}
+
+/**
+ * Set the hash fields according to the @p flow information.
+ *
+ * @param[in] dev_flow
+ * Pointer to the mlx5_flow.
+ */
+static void
+flow_dv_hashfields_set(struct mlx5_flow *dev_flow)
+{
+ struct rte_flow *flow = dev_flow->flow;
+ uint64_t items = dev_flow->layers;
+ int rss_inner = 0;
+ uint64_t rss_types = rte_eth_rss_hf_refine(flow->rss.types);
+
+ dev_flow->hash_fields = 0;
+#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
+ if (flow->rss.level >= 2) {
+ dev_flow->hash_fields |= IBV_RX_HASH_INNER;
+ rss_inner = 1;
+ }
+#endif
+ if ((rss_inner && (items & MLX5_FLOW_LAYER_INNER_L3_IPV4)) ||
+ (!rss_inner && (items & MLX5_FLOW_LAYER_OUTER_L3_IPV4))) {
+ if (rss_types & MLX5_IPV4_LAYER_TYPES) {
+ if (rss_types & ETH_RSS_L3_SRC_ONLY)
+ dev_flow->hash_fields |= IBV_RX_HASH_SRC_IPV4;
+ else if (rss_types & ETH_RSS_L3_DST_ONLY)
+ dev_flow->hash_fields |= IBV_RX_HASH_DST_IPV4;
+ else
+ dev_flow->hash_fields |= MLX5_IPV4_IBV_RX_HASH;
+ }
+ } else if ((rss_inner && (items & MLX5_FLOW_LAYER_INNER_L3_IPV6)) ||
+ (!rss_inner && (items & MLX5_FLOW_LAYER_OUTER_L3_IPV6))) {
+ if (rss_types & MLX5_IPV6_LAYER_TYPES) {
+ if (rss_types & ETH_RSS_L3_SRC_ONLY)
+ dev_flow->hash_fields |= IBV_RX_HASH_SRC_IPV6;
+ else if (rss_types & ETH_RSS_L3_DST_ONLY)
+ dev_flow->hash_fields |= IBV_RX_HASH_DST_IPV6;
+ else
+ dev_flow->hash_fields |= MLX5_IPV6_IBV_RX_HASH;
+ }
+ }
+ if ((rss_inner && (items & MLX5_FLOW_LAYER_INNER_L4_UDP)) ||
+ (!rss_inner && (items & MLX5_FLOW_LAYER_OUTER_L4_UDP))) {
+ if (rss_types & ETH_RSS_UDP) {
+ if (rss_types & ETH_RSS_L4_SRC_ONLY)
+ dev_flow->hash_fields |=
+ IBV_RX_HASH_SRC_PORT_UDP;
+ else if (rss_types & ETH_RSS_L4_DST_ONLY)
+ dev_flow->hash_fields |=
+ IBV_RX_HASH_DST_PORT_UDP;
+ else
+ dev_flow->hash_fields |= MLX5_UDP_IBV_RX_HASH;
+ }
+ } else if ((rss_inner && (items & MLX5_FLOW_LAYER_INNER_L4_TCP)) ||
+ (!rss_inner && (items & MLX5_FLOW_LAYER_OUTER_L4_TCP))) {
+ if (rss_types & ETH_RSS_TCP) {
+ if (rss_types & ETH_RSS_L4_SRC_ONLY)
+ dev_flow->hash_fields |=
+ IBV_RX_HASH_SRC_PORT_TCP;
+ else if (rss_types & ETH_RSS_L4_DST_ONLY)
+ dev_flow->hash_fields |=
+ IBV_RX_HASH_DST_PORT_TCP;
+ else
+ dev_flow->hash_fields |= MLX5_TCP_IBV_RX_HASH;
+ }
+ }
+}
+
+/**
+ * Fill the flow with DV spec, lock free
+ * (mutex should be acquired by caller).
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in, out] dev_flow
+ * Pointer to the sub flow.
+ * @param[in] attr
+ * Pointer to the flow attributes.
+ * @param[in] items
+ * Pointer to the list of items.
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+__flow_dv_translate(struct rte_eth_dev *dev,
+ struct mlx5_flow *dev_flow,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_config *dev_conf = &priv->config;
+ struct rte_flow *flow = dev_flow->flow;
+ uint64_t item_flags = 0;
+ uint64_t last_item = 0;
+ uint64_t action_flags = 0;
+ uint64_t priority = attr->priority;
+ struct mlx5_flow_dv_matcher matcher = {
+ .mask = {
+ .size = sizeof(matcher.mask.buf),
+ },
+ };
+ int actions_n = 0;
+ bool actions_end = false;
+ union {
+ struct mlx5_flow_dv_modify_hdr_resource res;
+ uint8_t len[sizeof(struct mlx5_flow_dv_modify_hdr_resource) +
+ sizeof(struct mlx5_modification_cmd) *
+ (MLX5_MAX_MODIFY_NUM + 1)];
+ } mhdr_dummy;
+ struct mlx5_flow_dv_modify_hdr_resource *mhdr_res = &mhdr_dummy.res;
+ union flow_dv_attr flow_attr = { .attr = 0 };
+ uint32_t tag_be;
+ union mlx5_flow_tbl_key tbl_key;
+ uint32_t modify_action_position = UINT32_MAX;
+ void *match_mask = matcher.mask.buf;
+ void *match_value = dev_flow->dv.value.buf;
+ uint8_t next_protocol = 0xff;
+ struct rte_vlan_hdr vlan = { 0 };
+ uint32_t table;
+ int ret = 0;
+
+ mhdr_res->ft_type = attr->egress ? MLX5DV_FLOW_TABLE_TYPE_NIC_TX :
+ MLX5DV_FLOW_TABLE_TYPE_NIC_RX;
+ ret = mlx5_flow_group_to_table(attr, dev_flow->external, attr->group,
+ &table, error);
+ if (ret)
+ return ret;
+ dev_flow->group = table;
+ if (attr->transfer)
+ mhdr_res->ft_type = MLX5DV_FLOW_TABLE_TYPE_FDB;
+ if (priority == MLX5_FLOW_PRIO_RSVD)
+ priority = dev_conf->flow_prio - 1;
+ /* number of actions must be set to 0 in case of dirty stack. */
+ mhdr_res->actions_num = 0;
+ for (; !actions_end ; actions++) {
+ const struct rte_flow_action_queue *queue;
+ const struct rte_flow_action_rss *rss;
+ const struct rte_flow_action *action = actions;
+ const struct rte_flow_action_count *count = action->conf;
+ const uint8_t *rss_key;
+ const struct rte_flow_action_jump *jump_data;
+ const struct rte_flow_action_meter *mtr;
+ struct mlx5_flow_tbl_resource *tbl;
+ uint32_t port_id = 0;
+ struct mlx5_flow_dv_port_id_action_resource port_id_resource;
+ int action_type = actions->type;
+ const struct rte_flow_action *found_action = NULL;
+
+ switch (action_type) {
+ case RTE_FLOW_ACTION_TYPE_VOID:
+ break;
+ case RTE_FLOW_ACTION_TYPE_PORT_ID:
+ if (flow_dv_translate_action_port_id(dev, action,
+ &port_id, error))
+ return -rte_errno;
+ port_id_resource.port_id = port_id;
+ if (flow_dv_port_id_action_resource_register
+ (dev, &port_id_resource, dev_flow, error))
+ return -rte_errno;
+ dev_flow->dv.actions[actions_n++] =
+ dev_flow->dv.port_id_action->action;
+ action_flags |= MLX5_FLOW_ACTION_PORT_ID;
+ break;
+ case RTE_FLOW_ACTION_TYPE_FLAG:
+ action_flags |= MLX5_FLOW_ACTION_FLAG;
+ if (dev_conf->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
+ struct rte_flow_action_mark mark = {
+ .id = MLX5_FLOW_MARK_DEFAULT,
+ };
+
+ if (flow_dv_convert_action_mark(dev, &mark,
+ mhdr_res,
+ error))
+ return -rte_errno;
+ action_flags |= MLX5_FLOW_ACTION_MARK_EXT;
+ break;
+ }
+ tag_be = mlx5_flow_mark_set(MLX5_FLOW_MARK_DEFAULT);
+ if (!dev_flow->dv.tag_resource)
+ if (flow_dv_tag_resource_register
+ (dev, tag_be, dev_flow, error))
+ return -rte_errno;
+ dev_flow->dv.actions[actions_n++] =
+ dev_flow->dv.tag_resource->action;
+ break;
+ case RTE_FLOW_ACTION_TYPE_MARK:
+ action_flags |= MLX5_FLOW_ACTION_MARK;
+ if (dev_conf->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
+ const struct rte_flow_action_mark *mark =
+ (const struct rte_flow_action_mark *)
+ actions->conf;
+
+ if (flow_dv_convert_action_mark(dev, mark,
+ mhdr_res,
+ error))
+ return -rte_errno;
+ action_flags |= MLX5_FLOW_ACTION_MARK_EXT;
+ break;
+ }
+ /* Fall-through */
+ case MLX5_RTE_FLOW_ACTION_TYPE_MARK:
+ /* Legacy (non-extensive) MARK action. */
+ tag_be = mlx5_flow_mark_set
+ (((const struct rte_flow_action_mark *)
+ (actions->conf))->id);
+ if (!dev_flow->dv.tag_resource)
+ if (flow_dv_tag_resource_register
+ (dev, tag_be, dev_flow, error))
+ return -rte_errno;
+ dev_flow->dv.actions[actions_n++] =
+ dev_flow->dv.tag_resource->action;
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_META:
+ if (flow_dv_convert_action_set_meta
+ (dev, mhdr_res, attr,
+ (const struct rte_flow_action_set_meta *)
+ actions->conf, error))
+ return -rte_errno;
+ action_flags |= MLX5_FLOW_ACTION_SET_META;
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_TAG:
+ if (flow_dv_convert_action_set_tag
+ (dev, mhdr_res,
+ (const struct rte_flow_action_set_tag *)
+ actions->conf, error))
+ return -rte_errno;
+ action_flags |= MLX5_FLOW_ACTION_SET_TAG;
+ break;
+ case RTE_FLOW_ACTION_TYPE_DROP:
+ action_flags |= MLX5_FLOW_ACTION_DROP;
+ break;
+ case RTE_FLOW_ACTION_TYPE_QUEUE:
+ assert(flow->rss.queue);
+ queue = actions->conf;
+ flow->rss.queue_num = 1;
+ (*flow->rss.queue)[0] = queue->index;
+ action_flags |= MLX5_FLOW_ACTION_QUEUE;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RSS:
+ assert(flow->rss.queue);
+ rss = actions->conf;
+ if (flow->rss.queue)
+ memcpy((*flow->rss.queue), rss->queue,
+ rss->queue_num * sizeof(uint16_t));
+ flow->rss.queue_num = rss->queue_num;
+ /* NULL RSS key indicates default RSS key. */
+ rss_key = !rss->key ? rss_hash_default_key : rss->key;
+ memcpy(flow->rss.key, rss_key, MLX5_RSS_HASH_KEY_LEN);
+ /*
+ * rss->level and rss.types should be set in advance
+ * when expanding items for RSS.
+ */
+ action_flags |= MLX5_FLOW_ACTION_RSS;
+ break;
+ case RTE_FLOW_ACTION_TYPE_COUNT:
+ if (!dev_conf->devx) {
+ rte_errno = ENOTSUP;
+ goto cnt_err;
+ }
+ flow->counter = flow_dv_counter_alloc(dev,
+ count->shared,
+ count->id,
+ dev_flow->group);
+ if (flow->counter == NULL)
+ goto cnt_err;
+ dev_flow->dv.actions[actions_n++] =
+ flow->counter->action;
+ action_flags |= MLX5_FLOW_ACTION_COUNT;
+ break;
+cnt_err:
+ if (rte_errno == ENOTSUP)
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "count action not supported");
+ else
+ return rte_flow_error_set
+ (error, rte_errno,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "cannot create counter"
+ " object.");
+ break;
+ case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN:
+ dev_flow->dv.actions[actions_n++] =
+ priv->sh->pop_vlan_action;
+ action_flags |= MLX5_FLOW_ACTION_OF_POP_VLAN;
+ break;
+ case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
+ flow_dev_get_vlan_info_from_items(items, &vlan);
+ vlan.eth_proto = rte_be_to_cpu_16
+ ((((const struct rte_flow_action_of_push_vlan *)
+ actions->conf)->ethertype));
+ found_action = mlx5_flow_find_action
+ (actions + 1,
+ RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID);
+ if (found_action)
+ mlx5_update_vlan_vid_pcp(found_action, &vlan);
+ found_action = mlx5_flow_find_action
+ (actions + 1,
+ RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP);
+ if (found_action)
+ mlx5_update_vlan_vid_pcp(found_action, &vlan);
+ if (flow_dv_create_action_push_vlan
+ (dev, attr, &vlan, dev_flow, error))
+ return -rte_errno;
+ dev_flow->dv.actions[actions_n++] =
+ dev_flow->dv.push_vlan_res->action;
+ action_flags |= MLX5_FLOW_ACTION_OF_PUSH_VLAN;
+ break;
+ case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
+ /* of_vlan_push action handled this action */
+ assert(action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN);
+ break;
+ case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
+ if (action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN)
+ break;
+ flow_dev_get_vlan_info_from_items(items, &vlan);
+ mlx5_update_vlan_vid_pcp(actions, &vlan);
+ /* If no VLAN push - this is a modify header action */
+ if (flow_dv_convert_action_modify_vlan_vid
+ (mhdr_res, actions, error))
+ return -rte_errno;
+ action_flags |= MLX5_FLOW_ACTION_OF_SET_VLAN_VID;
+ break;
+ case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
+ case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
+ if (flow_dv_create_action_l2_encap(dev, actions,
+ dev_flow,
+ attr->transfer,
+ error))
+ return -rte_errno;
+ dev_flow->dv.actions[actions_n++] =
+ dev_flow->dv.encap_decap->verbs_action;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP ?
+ MLX5_FLOW_ACTION_VXLAN_ENCAP :
+ MLX5_FLOW_ACTION_NVGRE_ENCAP;
+ break;
+ case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
+ case RTE_FLOW_ACTION_TYPE_NVGRE_DECAP:
+ if (flow_dv_create_action_l2_decap(dev, dev_flow,
+ attr->transfer,
+ error))
+ return -rte_errno;
+ dev_flow->dv.actions[actions_n++] =
+ dev_flow->dv.encap_decap->verbs_action;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_VXLAN_DECAP ?
+ MLX5_FLOW_ACTION_VXLAN_DECAP :
+ MLX5_FLOW_ACTION_NVGRE_DECAP;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
+ /* Handle encap with preceding decap. */
+ if (action_flags & MLX5_FLOW_ACTION_RAW_DECAP) {
+ if (flow_dv_create_action_raw_encap
+ (dev, actions, dev_flow, attr, error))
+ return -rte_errno;
+ dev_flow->dv.actions[actions_n++] =
+ dev_flow->dv.encap_decap->verbs_action;
+ } else {
+ /* Handle encap without preceding decap. */
+ if (flow_dv_create_action_l2_encap
+ (dev, actions, dev_flow, attr->transfer,
+ error))
+ return -rte_errno;
+ dev_flow->dv.actions[actions_n++] =
+ dev_flow->dv.encap_decap->verbs_action;
+ }
+ action_flags |= MLX5_FLOW_ACTION_RAW_ENCAP;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
+ /* Check if this decap is followed by encap. */
+ for (; action->type != RTE_FLOW_ACTION_TYPE_END &&
+ action->type != RTE_FLOW_ACTION_TYPE_RAW_ENCAP;
+ action++) {
+ }
+ /* Handle decap only if it isn't followed by encap. */
+ if (action->type != RTE_FLOW_ACTION_TYPE_RAW_ENCAP) {
+ if (flow_dv_create_action_l2_decap
+ (dev, dev_flow, attr->transfer, error))
+ return -rte_errno;
+ dev_flow->dv.actions[actions_n++] =
+ dev_flow->dv.encap_decap->verbs_action;
+ }
+ /* If decap is followed by encap, handle it at encap. */
+ action_flags |= MLX5_FLOW_ACTION_RAW_DECAP;
+ break;
+ case RTE_FLOW_ACTION_TYPE_JUMP:
+ jump_data = action->conf;
+ ret = mlx5_flow_group_to_table(attr, dev_flow->external,
+ jump_data->group, &table,
+ error);
+ if (ret)
+ return ret;
+ tbl = flow_dv_tbl_resource_get(dev, table,
+ attr->egress,
+ attr->transfer, error);
+ if (!tbl)
+ return rte_flow_error_set
+ (error, errno,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "cannot create jump action.");
+ if (flow_dv_jump_tbl_resource_register
+ (dev, tbl, dev_flow, error)) {
+ flow_dv_tbl_resource_release(dev, tbl);
+ return rte_flow_error_set
+ (error, errno,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "cannot create jump action.");
+ }
+ dev_flow->dv.actions[actions_n++] =
+ dev_flow->dv.jump->action;
+ action_flags |= MLX5_FLOW_ACTION_JUMP;
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_MAC_SRC:
+ case RTE_FLOW_ACTION_TYPE_SET_MAC_DST:
+ if (flow_dv_convert_action_modify_mac
+ (mhdr_res, actions, error))
+ return -rte_errno;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_SET_MAC_SRC ?
+ MLX5_FLOW_ACTION_SET_MAC_SRC :
+ MLX5_FLOW_ACTION_SET_MAC_DST;
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
+ case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
+ if (flow_dv_convert_action_modify_ipv4
+ (mhdr_res, actions, error))
+ return -rte_errno;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC ?
+ MLX5_FLOW_ACTION_SET_IPV4_SRC :
+ MLX5_FLOW_ACTION_SET_IPV4_DST;
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
+ case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
+ if (flow_dv_convert_action_modify_ipv6
+ (mhdr_res, actions, error))
+ return -rte_errno;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC ?
+ MLX5_FLOW_ACTION_SET_IPV6_SRC :
+ MLX5_FLOW_ACTION_SET_IPV6_DST;
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
+ case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
+ if (flow_dv_convert_action_modify_tp
+ (mhdr_res, actions, items,
+ &flow_attr, error))
+ return -rte_errno;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_SET_TP_SRC ?
+ MLX5_FLOW_ACTION_SET_TP_SRC :
+ MLX5_FLOW_ACTION_SET_TP_DST;
+ break;
+ case RTE_FLOW_ACTION_TYPE_DEC_TTL:
+ if (flow_dv_convert_action_modify_dec_ttl
+ (mhdr_res, items, &flow_attr, error))
+ return -rte_errno;
+ action_flags |= MLX5_FLOW_ACTION_DEC_TTL;
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_TTL:
+ if (flow_dv_convert_action_modify_ttl
+ (mhdr_res, actions, items,
+ &flow_attr, error))
+ return -rte_errno;
+ action_flags |= MLX5_FLOW_ACTION_SET_TTL;
+ break;
+ case RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ:
+ case RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ:
+ if (flow_dv_convert_action_modify_tcp_seq
+ (mhdr_res, actions, error))
+ return -rte_errno;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ ?
+ MLX5_FLOW_ACTION_INC_TCP_SEQ :
+ MLX5_FLOW_ACTION_DEC_TCP_SEQ;
+ break;
+
+ case RTE_FLOW_ACTION_TYPE_INC_TCP_ACK:
+ case RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK:
+ if (flow_dv_convert_action_modify_tcp_ack
+ (mhdr_res, actions, error))
+ return -rte_errno;
+ action_flags |= actions->type ==
+ RTE_FLOW_ACTION_TYPE_INC_TCP_ACK ?
+ MLX5_FLOW_ACTION_INC_TCP_ACK :
+ MLX5_FLOW_ACTION_DEC_TCP_ACK;
+ break;
+ case MLX5_RTE_FLOW_ACTION_TYPE_TAG:
+ if (flow_dv_convert_action_set_reg
+ (mhdr_res, actions, error))
+ return -rte_errno;
+ action_flags |= MLX5_FLOW_ACTION_SET_TAG;
+ break;
+ case MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG:
+ if (flow_dv_convert_action_copy_mreg
+ (dev, mhdr_res, actions, error))
+ return -rte_errno;
+ action_flags |= MLX5_FLOW_ACTION_SET_TAG;
+ break;
+ case RTE_FLOW_ACTION_TYPE_METER:
+ mtr = actions->conf;
+ if (!flow->meter) {
+ flow->meter = mlx5_flow_meter_attach(priv,
+ mtr->mtr_id, attr,
+ error);
+ if (!flow->meter)
+ return rte_flow_error_set(error,
+ rte_errno,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "meter not found "
+ "or invalid parameters");
+ }
+ /* Set the meter action. */
+ dev_flow->dv.actions[actions_n++] =
+ flow->meter->mfts->meter_action;
+ action_flags |= MLX5_FLOW_ACTION_METER;
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP:
+ if (flow_dv_convert_action_modify_ipv4_dscp(mhdr_res,
+ actions, error))
+ return -rte_errno;
+ action_flags |= MLX5_FLOW_ACTION_SET_IPV4_DSCP;
+ break;
+ case RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP:
+ if (flow_dv_convert_action_modify_ipv6_dscp(mhdr_res,
+ actions, error))
+ return -rte_errno;
+ action_flags |= MLX5_FLOW_ACTION_SET_IPV6_DSCP;
+ break;
+ case RTE_FLOW_ACTION_TYPE_END:
+ actions_end = true;
+ if (mhdr_res->actions_num) {
+ /* create modify action if needed. */
+ if (flow_dv_modify_hdr_resource_register
+ (dev, mhdr_res, dev_flow, error))
+ return -rte_errno;
+ dev_flow->dv.actions[modify_action_position] =
+ dev_flow->dv.modify_hdr->verbs_action;
+ }
+ break;
+ default:
+ break;
+ }
+ if (mhdr_res->actions_num &&
+ modify_action_position == UINT32_MAX)
+ modify_action_position = actions_n++;
+ }
+ dev_flow->dv.actions_n = actions_n;
+ dev_flow->actions = action_flags;
+ for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
+ int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ int item_type = items->type;
+
+ switch (item_type) {
+ case RTE_FLOW_ITEM_TYPE_PORT_ID:
+ flow_dv_translate_item_port_id(dev, match_mask,
+ match_value, items);
+ last_item = MLX5_FLOW_ITEM_PORT_ID;
+ break;
+ case RTE_FLOW_ITEM_TYPE_ETH:
+ flow_dv_translate_item_eth(match_mask, match_value,
+ items, tunnel);
+ matcher.priority = MLX5_PRIORITY_MAP_L2;
+ last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
+ MLX5_FLOW_LAYER_OUTER_L2;
+ break;
+ case RTE_FLOW_ITEM_TYPE_VLAN:
+ flow_dv_translate_item_vlan(dev_flow,
+ match_mask, match_value,
+ items, tunnel);
+ matcher.priority = MLX5_PRIORITY_MAP_L2;
+ last_item = tunnel ? (MLX5_FLOW_LAYER_INNER_L2 |
+ MLX5_FLOW_LAYER_INNER_VLAN) :
+ (MLX5_FLOW_LAYER_OUTER_L2 |
+ MLX5_FLOW_LAYER_OUTER_VLAN);
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV4:
+ mlx5_flow_tunnel_ip_check(items, next_protocol,
+ &item_flags, &tunnel);
+ flow_dv_translate_item_ipv4(match_mask, match_value,
+ items, tunnel,
+ dev_flow->group);
+ matcher.priority = MLX5_PRIORITY_MAP_L3;
+ last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV4 :
+ MLX5_FLOW_LAYER_OUTER_L3_IPV4;
+ if (items->mask != NULL &&
+ ((const struct rte_flow_item_ipv4 *)
+ items->mask)->hdr.next_proto_id) {
+ next_protocol =
+ ((const struct rte_flow_item_ipv4 *)
+ (items->spec))->hdr.next_proto_id;
+ next_protocol &=
+ ((const struct rte_flow_item_ipv4 *)
+ (items->mask))->hdr.next_proto_id;
+ } else {
+ /* Reset for inner layer. */
+ next_protocol = 0xff;
+ }
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV6:
+ mlx5_flow_tunnel_ip_check(items, next_protocol,
+ &item_flags, &tunnel);
+ flow_dv_translate_item_ipv6(match_mask, match_value,
+ items, tunnel,
+ dev_flow->group);
+ matcher.priority = MLX5_PRIORITY_MAP_L3;
+ last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV6 :
+ MLX5_FLOW_LAYER_OUTER_L3_IPV6;
+ if (items->mask != NULL &&
+ ((const struct rte_flow_item_ipv6 *)
+ items->mask)->hdr.proto) {
+ next_protocol =
+ ((const struct rte_flow_item_ipv6 *)
+ items->spec)->hdr.proto;
+ next_protocol &=
+ ((const struct rte_flow_item_ipv6 *)
+ items->mask)->hdr.proto;
+ } else {
+ /* Reset for inner layer. */
+ next_protocol = 0xff;
+ }
+ break;
+ case RTE_FLOW_ITEM_TYPE_TCP:
+ flow_dv_translate_item_tcp(match_mask, match_value,
+ items, tunnel);
+ matcher.priority = MLX5_PRIORITY_MAP_L4;
+ last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L4_TCP :
+ MLX5_FLOW_LAYER_OUTER_L4_TCP;
+ break;
+ case RTE_FLOW_ITEM_TYPE_UDP:
+ flow_dv_translate_item_udp(match_mask, match_value,
+ items, tunnel);
+ matcher.priority = MLX5_PRIORITY_MAP_L4;
+ last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L4_UDP :
+ MLX5_FLOW_LAYER_OUTER_L4_UDP;
+ break;
+ case RTE_FLOW_ITEM_TYPE_GRE:
+ flow_dv_translate_item_gre(match_mask, match_value,
+ items, tunnel);
+ last_item = MLX5_FLOW_LAYER_GRE;
+ break;
+ case RTE_FLOW_ITEM_TYPE_GRE_KEY:
+ flow_dv_translate_item_gre_key(match_mask,
+ match_value, items);
+ last_item = MLX5_FLOW_LAYER_GRE_KEY;
+ break;
+ case RTE_FLOW_ITEM_TYPE_NVGRE:
+ flow_dv_translate_item_nvgre(match_mask, match_value,
+ items, tunnel);
+ last_item = MLX5_FLOW_LAYER_GRE;
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN:
+ flow_dv_translate_item_vxlan(match_mask, match_value,
+ items, tunnel);
+ last_item = MLX5_FLOW_LAYER_VXLAN;
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
+ flow_dv_translate_item_vxlan(match_mask, match_value,
+ items, tunnel);
+ last_item = MLX5_FLOW_LAYER_VXLAN_GPE;
+ break;
+ case RTE_FLOW_ITEM_TYPE_GENEVE:
+ flow_dv_translate_item_geneve(match_mask, match_value,
+ items, tunnel);
+ last_item = MLX5_FLOW_LAYER_GENEVE;
+ break;
+ case RTE_FLOW_ITEM_TYPE_MPLS:
+ flow_dv_translate_item_mpls(match_mask, match_value,
+ items, last_item, tunnel);
+ last_item = MLX5_FLOW_LAYER_MPLS;
+ break;
+ case RTE_FLOW_ITEM_TYPE_MARK:
+ flow_dv_translate_item_mark(dev, match_mask,
+ match_value, items);
+ last_item = MLX5_FLOW_ITEM_MARK;
+ break;
+ case RTE_FLOW_ITEM_TYPE_META:
+ flow_dv_translate_item_meta(dev, match_mask,
+ match_value, attr, items);
+ last_item = MLX5_FLOW_ITEM_METADATA;
+ break;
+ case RTE_FLOW_ITEM_TYPE_ICMP:
+ flow_dv_translate_item_icmp(match_mask, match_value,
+ items, tunnel);
+ last_item = MLX5_FLOW_LAYER_ICMP;
+ break;
+ case RTE_FLOW_ITEM_TYPE_ICMP6:
+ flow_dv_translate_item_icmp6(match_mask, match_value,
+ items, tunnel);
+ last_item = MLX5_FLOW_LAYER_ICMP6;
+ break;
+ case RTE_FLOW_ITEM_TYPE_TAG:
+ flow_dv_translate_item_tag(dev, match_mask,
+ match_value, items);
+ last_item = MLX5_FLOW_ITEM_TAG;
+ break;
+ case MLX5_RTE_FLOW_ITEM_TYPE_TAG:
+ flow_dv_translate_mlx5_item_tag(dev, match_mask,
+ match_value, items);
+ last_item = MLX5_FLOW_ITEM_TAG;
+ break;
+ case MLX5_RTE_FLOW_ITEM_TYPE_TX_QUEUE:
+ flow_dv_translate_item_tx_queue(dev, match_mask,
+ match_value,
+ items);
+ last_item = MLX5_FLOW_ITEM_TX_QUEUE;
+ break;
+ case RTE_FLOW_ITEM_TYPE_GTP:
+ flow_dv_translate_item_gtp(match_mask, match_value,
+ items, tunnel);
+ last_item = MLX5_FLOW_LAYER_GTP;
+ break;
+ default:
+ break;
+ }
+ item_flags |= last_item;
+ }
+ /*
+ * When E-Switch mode is enabled, we have two cases where we need to
+ * set the source port manually.
+ * The first one, is in case of Nic steering rule, and the second is
+ * E-Switch rule where no port_id item was found. In both cases
+ * the source port is set according the current port in use.
+ */
+ if (!(item_flags & MLX5_FLOW_ITEM_PORT_ID) &&
+ (priv->representor || priv->master)) {
+ if (flow_dv_translate_item_port_id(dev, match_mask,
+ match_value, NULL))
+ return -rte_errno;
+ }
+ assert(!flow_dv_check_valid_spec(matcher.mask.buf,
+ dev_flow->dv.value.buf));
+ dev_flow->layers = item_flags;
+ if (action_flags & MLX5_FLOW_ACTION_RSS)
+ flow_dv_hashfields_set(dev_flow);
+ /* Register matcher. */
+ matcher.crc = rte_raw_cksum((const void *)matcher.mask.buf,
+ matcher.mask.size);
+ matcher.priority = mlx5_flow_adjust_priority(dev, priority,
+ matcher.priority);
+ /* reserved field no needs to be set to 0 here. */
+ tbl_key.domain = attr->transfer;
+ tbl_key.direction = attr->egress;
+ tbl_key.table_id = dev_flow->group;
+ if (flow_dv_matcher_register(dev, &matcher, &tbl_key, dev_flow, error))
+ return -rte_errno;
+ return 0;
+}
+
+/**
+ * Apply the flow to the NIC, lock free,
+ * (mutex should be acquired by caller).
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+__flow_dv_apply(struct rte_eth_dev *dev, struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ struct mlx5_flow_dv *dv;
+ struct mlx5_flow *dev_flow;
+ struct mlx5_priv *priv = dev->data->dev_private;
+ int n;
+ int err;
+
+ LIST_FOREACH(dev_flow, &flow->dev_flows, next) {
+ dv = &dev_flow->dv;
+ n = dv->actions_n;
+ if (dev_flow->actions & MLX5_FLOW_ACTION_DROP) {
+ if (dev_flow->transfer) {
+ dv->actions[n++] = priv->sh->esw_drop_action;
+ } else {
+ dv->hrxq = mlx5_hrxq_drop_new(dev);
+ if (!dv->hrxq) {
+ rte_flow_error_set
+ (error, errno,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "cannot get drop hash queue");
+ goto error;
+ }
+ dv->actions[n++] = dv->hrxq->action;
+ }
+ } else if (dev_flow->actions &
+ (MLX5_FLOW_ACTION_QUEUE | MLX5_FLOW_ACTION_RSS)) {
+ struct mlx5_hrxq *hrxq;
+
+ assert(flow->rss.queue);
+ hrxq = mlx5_hrxq_get(dev, flow->rss.key,
+ MLX5_RSS_HASH_KEY_LEN,
+ dev_flow->hash_fields,
+ (*flow->rss.queue),
+ flow->rss.queue_num);
+ if (!hrxq) {
+ hrxq = mlx5_hrxq_new
+ (dev, flow->rss.key,
+ MLX5_RSS_HASH_KEY_LEN,
+ dev_flow->hash_fields,
+ (*flow->rss.queue),
+ flow->rss.queue_num,
+ !!(dev_flow->layers &
+ MLX5_FLOW_LAYER_TUNNEL));
+ }
+ if (!hrxq) {
+ rte_flow_error_set
+ (error, rte_errno,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+ "cannot get hash queue");
+ goto error;
+ }
+ dv->hrxq = hrxq;
+ dv->actions[n++] = dv->hrxq->action;
+ }
+ dv->flow =
+ mlx5_glue->dv_create_flow(dv->matcher->matcher_object,
+ (void *)&dv->value, n,
+ dv->actions);
+ if (!dv->flow) {
+ rte_flow_error_set(error, errno,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "hardware refuses to create flow");
+ goto error;
+ }
+ if (priv->vmwa_context &&
+ dev_flow->dv.vf_vlan.tag &&
+ !dev_flow->dv.vf_vlan.created) {
+ /*
+ * The rule contains the VLAN pattern.
+ * For VF we are going to create VLAN
+ * interface to make hypervisor set correct
+ * e-Switch vport context.
+ */
+ mlx5_vlan_vmwa_acquire(dev, &dev_flow->dv.vf_vlan);
+ }
+ }
+ return 0;
+error:
+ err = rte_errno; /* Save rte_errno before cleanup. */
+ LIST_FOREACH(dev_flow, &flow->dev_flows, next) {
+ struct mlx5_flow_dv *dv = &dev_flow->dv;
+ if (dv->hrxq) {
+ if (dev_flow->actions & MLX5_FLOW_ACTION_DROP)
+ mlx5_hrxq_drop_release(dev);
+ else
+ mlx5_hrxq_release(dev, dv->hrxq);
+ dv->hrxq = NULL;
+ }
+ if (dev_flow->dv.vf_vlan.tag &&
+ dev_flow->dv.vf_vlan.created)
+ mlx5_vlan_vmwa_release(dev, &dev_flow->dv.vf_vlan);
+ }
+ rte_errno = err; /* Restore rte_errno. */
+ return -rte_errno;
+}
+
+/**
+ * Release the flow matcher.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param flow
+ * Pointer to mlx5_flow.
+ *
+ * @return
+ * 1 while a reference on it exists, 0 when freed.
+ */
+static int
+flow_dv_matcher_release(struct rte_eth_dev *dev,
+ struct mlx5_flow *flow)
+{
+ struct mlx5_flow_dv_matcher *matcher = flow->dv.matcher;
+
+ assert(matcher->matcher_object);
+ DRV_LOG(DEBUG, "port %u matcher %p: refcnt %d--",
+ dev->data->port_id, (void *)matcher,
+ rte_atomic32_read(&matcher->refcnt));
+ if (rte_atomic32_dec_and_test(&matcher->refcnt)) {
+ claim_zero(mlx5_glue->dv_destroy_flow_matcher
+ (matcher->matcher_object));
+ LIST_REMOVE(matcher, next);
+ /* table ref-- in release interface. */
+ flow_dv_tbl_resource_release(dev, matcher->tbl);
+ rte_free(matcher);
+ DRV_LOG(DEBUG, "port %u matcher %p: removed",
+ dev->data->port_id, (void *)matcher);
+ return 0;
+ }
+ return 1;
+}
+
+/**
+ * Release an encap/decap resource.
+ *
+ * @param flow
+ * Pointer to mlx5_flow.
+ *
+ * @return
+ * 1 while a reference on it exists, 0 when freed.
+ */
+static int
+flow_dv_encap_decap_resource_release(struct mlx5_flow *flow)
+{
+ struct mlx5_flow_dv_encap_decap_resource *cache_resource =
+ flow->dv.encap_decap;
+
+ assert(cache_resource->verbs_action);
+ DRV_LOG(DEBUG, "encap/decap resource %p: refcnt %d--",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ if (rte_atomic32_dec_and_test(&cache_resource->refcnt)) {
+ claim_zero(mlx5_glue->destroy_flow_action
+ (cache_resource->verbs_action));
+ LIST_REMOVE(cache_resource, next);
+ rte_free(cache_resource);
+ DRV_LOG(DEBUG, "encap/decap resource %p: removed",
+ (void *)cache_resource);
+ return 0;
+ }
+ return 1;
+}
+
+/**
+ * Release an jump to table action resource.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param flow
+ * Pointer to mlx5_flow.
+ *
+ * @return
+ * 1 while a reference on it exists, 0 when freed.
+ */
+static int
+flow_dv_jump_tbl_resource_release(struct rte_eth_dev *dev,
+ struct mlx5_flow *flow)
+{
+ struct mlx5_flow_dv_jump_tbl_resource *cache_resource = flow->dv.jump;
+ struct mlx5_flow_tbl_data_entry *tbl_data =
+ container_of(cache_resource,
+ struct mlx5_flow_tbl_data_entry, jump);
+
+ assert(cache_resource->action);
+ DRV_LOG(DEBUG, "jump table resource %p: refcnt %d--",
+ (void *)cache_resource,
+ rte_atomic32_read(&cache_resource->refcnt));
+ if (rte_atomic32_dec_and_test(&cache_resource->refcnt)) {
+ claim_zero(mlx5_glue->destroy_flow_action
+ (cache_resource->action));
+ /* jump action memory free is inside the table release. */
+ flow_dv_tbl_resource_release(dev, &tbl_data->tbl);
+ DRV_LOG(DEBUG, "jump table resource %p: removed",
+ (void *)cache_resource);
+ return 0;
+ }
+ return 1;