-/**
- * Create the Rx queue Verbs/DevX object.
- *
- * @param dev
- * Pointer to Ethernet device.
- * @param idx
- * Queue index in DPDK Rx queue array
- *
- * @return
- * The Verbs/DevX object initialised, NULL otherwise and rte_errno is set.
- */
-struct mlx5_rxq_obj *
-mlx5_rxq_obj_new(struct rte_eth_dev *dev, uint16_t idx)
-{
- struct mlx5_priv *priv = dev->data->dev_private;
- struct mlx5_rxq_data *rxq_data = (*priv->rxqs)[idx];
- struct mlx5_rxq_ctrl *rxq_ctrl =
- container_of(rxq_data, struct mlx5_rxq_ctrl, rxq);
- struct ibv_wq_attr mod;
- union {
- struct {
- struct ibv_cq_init_attr_ex ibv;
- struct mlx5dv_cq_init_attr mlx5;
- } cq;
- struct {
- struct ibv_wq_init_attr ibv;
-#ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
- struct mlx5dv_wq_init_attr mlx5;
-#endif
- } wq;
- } attr;
- unsigned int cqe_n;
- unsigned int wqe_n = 1 << rxq_data->elts_n;
- struct mlx5_rxq_obj *tmpl = NULL;
- struct mlx5dv_cq cq_info;
- struct mlx5dv_rwq rwq;
- int ret = 0;
- struct mlx5dv_obj obj;
- struct mlx5_dev_config *config = &priv->config;
- const int mprq_en = mlx5_rxq_mprq_enabled(rxq_data);
-
- assert(rxq_data);
- assert(!rxq_ctrl->ibv);
- priv->verbs_alloc_ctx.type = MLX5_VERBS_ALLOC_TYPE_RX_QUEUE;
- priv->verbs_alloc_ctx.obj = rxq_ctrl;
- tmpl = rte_calloc_socket(__func__, 1, sizeof(*tmpl), 0,
- rxq_ctrl->socket);
- if (!tmpl) {
- DRV_LOG(ERR,
- "port %u Rx queue %u cannot allocate verbs resources",
- dev->data->port_id, rxq_data->idx);
- rte_errno = ENOMEM;
- goto error;
- }
- tmpl->rxq_ctrl = rxq_ctrl;
- if (rxq_ctrl->irq) {
- tmpl->channel = mlx5_glue->create_comp_channel(priv->sh->ctx);
- if (!tmpl->channel) {
- DRV_LOG(ERR, "port %u: comp channel creation failure",
- dev->data->port_id);
- rte_errno = ENOMEM;
- goto error;
- }
- }
- if (mprq_en)
- cqe_n = wqe_n * (1 << rxq_data->strd_num_n) - 1;
- else
- cqe_n = wqe_n - 1;
- attr.cq.ibv = (struct ibv_cq_init_attr_ex){
- .cqe = cqe_n,
- .channel = tmpl->channel,
- .comp_mask = 0,
- };
- attr.cq.mlx5 = (struct mlx5dv_cq_init_attr){
- .comp_mask = 0,
- };
- if (config->cqe_comp && !rxq_data->hw_timestamp) {
- attr.cq.mlx5.comp_mask |=
- MLX5DV_CQ_INIT_ATTR_MASK_COMPRESSED_CQE;
-#ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
- attr.cq.mlx5.cqe_comp_res_format =
- mprq_en ? MLX5DV_CQE_RES_FORMAT_CSUM_STRIDX :
- MLX5DV_CQE_RES_FORMAT_HASH;
-#else
- attr.cq.mlx5.cqe_comp_res_format = MLX5DV_CQE_RES_FORMAT_HASH;
-#endif
- /*
- * For vectorized Rx, it must not be doubled in order to
- * make cq_ci and rq_ci aligned.
- */
- if (mlx5_rxq_check_vec_support(rxq_data) < 0)
- attr.cq.ibv.cqe *= 2;
- } else if (config->cqe_comp && rxq_data->hw_timestamp) {
- DRV_LOG(DEBUG,
- "port %u Rx CQE compression is disabled for HW"
- " timestamp",
- dev->data->port_id);
- }
-#ifdef HAVE_IBV_MLX5_MOD_CQE_128B_PAD
- if (config->cqe_pad) {
- attr.cq.mlx5.comp_mask |= MLX5DV_CQ_INIT_ATTR_MASK_FLAGS;
- attr.cq.mlx5.flags |= MLX5DV_CQ_INIT_ATTR_FLAGS_CQE_PAD;
- }
-#endif
- tmpl->cq = mlx5_glue->cq_ex_to_cq
- (mlx5_glue->dv_create_cq(priv->sh->ctx, &attr.cq.ibv,
- &attr.cq.mlx5));
- if (tmpl->cq == NULL) {
- DRV_LOG(ERR, "port %u Rx queue %u CQ creation failure",
- dev->data->port_id, idx);
- rte_errno = ENOMEM;
- goto error;
- }
- DRV_LOG(DEBUG, "port %u device_attr.max_qp_wr is %d",
- dev->data->port_id, priv->sh->device_attr.orig_attr.max_qp_wr);
- DRV_LOG(DEBUG, "port %u device_attr.max_sge is %d",
- dev->data->port_id, priv->sh->device_attr.orig_attr.max_sge);
- attr.wq.ibv = (struct ibv_wq_init_attr){
- .wq_context = NULL, /* Could be useful in the future. */
- .wq_type = IBV_WQT_RQ,
- /* Max number of outstanding WRs. */
- .max_wr = wqe_n >> rxq_data->sges_n,
- /* Max number of scatter/gather elements in a WR. */
- .max_sge = 1 << rxq_data->sges_n,
- .pd = priv->sh->pd,
- .cq = tmpl->cq,
- .comp_mask =
- IBV_WQ_FLAGS_CVLAN_STRIPPING |
- 0,
- .create_flags = (rxq_data->vlan_strip ?
- IBV_WQ_FLAGS_CVLAN_STRIPPING :
- 0),
- };
- /* By default, FCS (CRC) is stripped by hardware. */
- if (rxq_data->crc_present) {
- attr.wq.ibv.create_flags |= IBV_WQ_FLAGS_SCATTER_FCS;
- attr.wq.ibv.comp_mask |= IBV_WQ_INIT_ATTR_FLAGS;
- }
- if (config->hw_padding) {
-#if defined(HAVE_IBV_WQ_FLAG_RX_END_PADDING)
- attr.wq.ibv.create_flags |= IBV_WQ_FLAG_RX_END_PADDING;
- attr.wq.ibv.comp_mask |= IBV_WQ_INIT_ATTR_FLAGS;
-#elif defined(HAVE_IBV_WQ_FLAGS_PCI_WRITE_END_PADDING)
- attr.wq.ibv.create_flags |= IBV_WQ_FLAGS_PCI_WRITE_END_PADDING;
- attr.wq.ibv.comp_mask |= IBV_WQ_INIT_ATTR_FLAGS;
-#endif
- }
-#ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
- attr.wq.mlx5 = (struct mlx5dv_wq_init_attr){
- .comp_mask = 0,
- };
- if (mprq_en) {
- struct mlx5dv_striding_rq_init_attr *mprq_attr =
- &attr.wq.mlx5.striding_rq_attrs;
-
- attr.wq.mlx5.comp_mask |= MLX5DV_WQ_INIT_ATTR_MASK_STRIDING_RQ;
- *mprq_attr = (struct mlx5dv_striding_rq_init_attr){
- .single_stride_log_num_of_bytes = rxq_data->strd_sz_n,
- .single_wqe_log_num_of_strides = rxq_data->strd_num_n,
- .two_byte_shift_en = MLX5_MPRQ_TWO_BYTE_SHIFT,
- };
- }
- tmpl->wq = mlx5_glue->dv_create_wq(priv->sh->ctx, &attr.wq.ibv,
- &attr.wq.mlx5);
-#else
- tmpl->wq = mlx5_glue->create_wq(priv->sh->ctx, &attr.wq.ibv);
-#endif
- if (tmpl->wq == NULL) {
- DRV_LOG(ERR, "port %u Rx queue %u WQ creation failure",
- dev->data->port_id, idx);
- rte_errno = ENOMEM;
- goto error;
- }
- /*
- * Make sure number of WRs*SGEs match expectations since a queue
- * cannot allocate more than "desc" buffers.
- */
- if (attr.wq.ibv.max_wr != (wqe_n >> rxq_data->sges_n) ||
- attr.wq.ibv.max_sge != (1u << rxq_data->sges_n)) {
- DRV_LOG(ERR,
- "port %u Rx queue %u requested %u*%u but got %u*%u"
- " WRs*SGEs",
- dev->data->port_id, idx,
- wqe_n >> rxq_data->sges_n, (1 << rxq_data->sges_n),
- attr.wq.ibv.max_wr, attr.wq.ibv.max_sge);
- rte_errno = EINVAL;
- goto error;
- }
- /* Change queue state to ready. */
- mod = (struct ibv_wq_attr){
- .attr_mask = IBV_WQ_ATTR_STATE,
- .wq_state = IBV_WQS_RDY,
- };
- ret = mlx5_glue->modify_wq(tmpl->wq, &mod);
- if (ret) {
- DRV_LOG(ERR,
- "port %u Rx queue %u WQ state to IBV_WQS_RDY failed",
- dev->data->port_id, idx);
- rte_errno = ret;
- goto error;
- }
- obj.cq.in = tmpl->cq;
- obj.cq.out = &cq_info;
- obj.rwq.in = tmpl->wq;
- obj.rwq.out = &rwq;
- ret = mlx5_glue->dv_init_obj(&obj, MLX5DV_OBJ_CQ | MLX5DV_OBJ_RWQ);
- if (ret) {
- rte_errno = ret;
- goto error;
- }
- if (cq_info.cqe_size != RTE_CACHE_LINE_SIZE) {
- DRV_LOG(ERR,
- "port %u wrong MLX5_CQE_SIZE environment variable"
- " value: it should be set to %u",
- dev->data->port_id, RTE_CACHE_LINE_SIZE);
- rte_errno = EINVAL;
- goto error;
- }
- /* Fill the rings. */
- rxq_data->wqes = rwq.buf;
- rxq_data->rq_db = rwq.dbrec;
- rxq_data->cqe_n = log2above(cq_info.cqe_cnt);
- rxq_data->cq_db = cq_info.dbrec;
- rxq_data->cqes = (volatile struct mlx5_cqe (*)[])(uintptr_t)cq_info.buf;
- rxq_data->cq_uar = cq_info.cq_uar;
- rxq_data->cqn = cq_info.cqn;
- rxq_data->cq_arm_sn = 0;
- mlx5_rxq_initialize(rxq_data);
- rxq_data->cq_ci = 0;
- DRV_LOG(DEBUG, "port %u rxq %u updated with %p", dev->data->port_id,
- idx, (void *)&tmpl);
- rte_atomic32_inc(&tmpl->refcnt);
- LIST_INSERT_HEAD(&priv->rxqsobj, tmpl, next);
- priv->verbs_alloc_ctx.type = MLX5_VERBS_ALLOC_TYPE_NONE;
- return tmpl;
-error:
- if (tmpl) {
- ret = rte_errno; /* Save rte_errno before cleanup. */
- if (tmpl->wq)
- claim_zero(mlx5_glue->destroy_wq(tmpl->wq));
- if (tmpl->cq)
- claim_zero(mlx5_glue->destroy_cq(tmpl->cq));
- if (tmpl->channel)
- claim_zero(mlx5_glue->destroy_comp_channel
- (tmpl->channel));
- rte_free(tmpl);
- rte_errno = ret; /* Restore rte_errno. */
- }
- priv->verbs_alloc_ctx.type = MLX5_VERBS_ALLOC_TYPE_NONE;
- return NULL;
-}
-