-
-/**
- * Handle a Rx error.
- * The function inserts the RQ state to reset when the first error CQE is
- * shown, then drains the CQ by the caller function loop. When the CQ is empty,
- * it moves the RQ state to ready and initializes the RQ.
- * Next CQE identification and error counting are in the caller responsibility.
- *
- * @param[in] rxq
- * Pointer to RX queue structure.
- * @param[in] vec
- * 1 when called from vectorized Rx burst, need to prepare mbufs for the RQ.
- * 0 when called from non-vectorized Rx burst.
- *
- * @return
- * -1 in case of recovery error, otherwise the CQE status.
- */
-int
-mlx5_rx_err_handle(struct mlx5_rxq_data *rxq, uint8_t vec)
-{
- const uint16_t cqe_n = 1 << rxq->cqe_n;
- const uint16_t cqe_mask = cqe_n - 1;
- const unsigned int wqe_n = 1 << rxq->elts_n;
- struct mlx5_rxq_ctrl *rxq_ctrl =
- container_of(rxq, struct mlx5_rxq_ctrl, rxq);
- union {
- volatile struct mlx5_cqe *cqe;
- volatile struct mlx5_err_cqe *err_cqe;
- } u = {
- .cqe = &(*rxq->cqes)[rxq->cq_ci & cqe_mask],
- };
- struct mlx5_mp_arg_queue_state_modify sm;
- int ret;
-
- switch (rxq->err_state) {
- case MLX5_RXQ_ERR_STATE_NO_ERROR:
- rxq->err_state = MLX5_RXQ_ERR_STATE_NEED_RESET;
- /* Fall-through */
- case MLX5_RXQ_ERR_STATE_NEED_RESET:
- sm.is_wq = 1;
- sm.queue_id = rxq->idx;
- sm.state = IBV_WQS_RESET;
- if (mlx5_queue_state_modify(ETH_DEV(rxq_ctrl->priv), &sm))
- return -1;
- if (rxq_ctrl->dump_file_n <
- rxq_ctrl->priv->config.max_dump_files_num) {
- MKSTR(err_str, "Unexpected CQE error syndrome "
- "0x%02x CQN = %u RQN = %u wqe_counter = %u"
- " rq_ci = %u cq_ci = %u", u.err_cqe->syndrome,
- rxq->cqn, rxq_ctrl->wqn,
- rte_be_to_cpu_16(u.err_cqe->wqe_counter),
- rxq->rq_ci << rxq->sges_n, rxq->cq_ci);
- MKSTR(name, "dpdk_mlx5_port_%u_rxq_%u_%u",
- rxq->port_id, rxq->idx, (uint32_t)rte_rdtsc());
- mlx5_dump_debug_information(name, NULL, err_str, 0);
- mlx5_dump_debug_information(name, "MLX5 Error CQ:",
- (const void *)((uintptr_t)
- rxq->cqes),
- sizeof(*u.cqe) * cqe_n);
- mlx5_dump_debug_information(name, "MLX5 Error RQ:",
- (const void *)((uintptr_t)
- rxq->wqes),
- 16 * wqe_n);
- rxq_ctrl->dump_file_n++;
- }
- rxq->err_state = MLX5_RXQ_ERR_STATE_NEED_READY;
- /* Fall-through */
- case MLX5_RXQ_ERR_STATE_NEED_READY:
- ret = check_cqe(u.cqe, cqe_n, rxq->cq_ci);
- if (ret == MLX5_CQE_STATUS_HW_OWN) {
- rte_cio_wmb();
- *rxq->cq_db = rte_cpu_to_be_32(rxq->cq_ci);
- rte_cio_wmb();
- /*
- * The RQ consumer index must be zeroed while moving
- * from RESET state to RDY state.
- */
- *rxq->rq_db = rte_cpu_to_be_32(0);
- rte_cio_wmb();
- sm.is_wq = 1;
- sm.queue_id = rxq->idx;
- sm.state = IBV_WQS_RDY;
- if (mlx5_queue_state_modify(ETH_DEV(rxq_ctrl->priv),
- &sm))
- return -1;
- if (vec) {
- const uint16_t q_mask = wqe_n - 1;
- uint16_t elt_idx;
- struct rte_mbuf **elt;
- int i;
- unsigned int n = wqe_n - (rxq->rq_ci -
- rxq->rq_pi);
-
- for (i = 0; i < (int)n; ++i) {
- elt_idx = (rxq->rq_ci + i) & q_mask;
- elt = &(*rxq->elts)[elt_idx];
- *elt = rte_mbuf_raw_alloc(rxq->mp);
- if (!*elt) {
- for (i--; i >= 0; --i) {
- elt_idx = (rxq->rq_ci +
- i) & q_mask;
- elt = &(*rxq->elts)
- [elt_idx];
- rte_pktmbuf_free_seg
- (*elt);
- }
- return -1;
- }
- }
- for (i = 0; i < (int)wqe_n; ++i) {
- elt = &(*rxq->elts)[i];
- DATA_LEN(*elt) =
- (uint16_t)((*elt)->buf_len -
- rte_pktmbuf_headroom(*elt));
- }
- /* Padding with a fake mbuf for vec Rx. */
- for (i = 0; i < MLX5_VPMD_DESCS_PER_LOOP; ++i)
- (*rxq->elts)[wqe_n + i] =
- &rxq->fake_mbuf;
- }
- mlx5_rxq_initialize(rxq);
- rxq->err_state = MLX5_RXQ_ERR_STATE_NO_ERROR;
- }
- return ret;
- default:
- return -1;
- }
-}
-
-/**
- * Get size of the next packet for a given CQE. For compressed CQEs, the
- * consumer index is updated only once all packets of the current one have
- * been processed.
- *
- * @param rxq
- * Pointer to RX queue.
- * @param cqe
- * CQE to process.
- * @param[out] mcqe
- * Store pointer to mini-CQE if compressed. Otherwise, the pointer is not
- * written.
- *
- * @return
- * 0 in case of empty CQE, otherwise the packet size in bytes.
- */
-static inline int
-mlx5_rx_poll_len(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cqe,
- uint16_t cqe_cnt, volatile struct mlx5_mini_cqe8 **mcqe)
-{
- struct rxq_zip *zip = &rxq->zip;
- uint16_t cqe_n = cqe_cnt + 1;
- int len;
- uint16_t idx, end;
-
- do {
- len = 0;
- /* Process compressed data in the CQE and mini arrays. */
- if (zip->ai) {
- volatile struct mlx5_mini_cqe8 (*mc)[8] =
- (volatile struct mlx5_mini_cqe8 (*)[8])
- (uintptr_t)(&(*rxq->cqes)[zip->ca &
- cqe_cnt].pkt_info);
-
- len = rte_be_to_cpu_32((*mc)[zip->ai & 7].byte_cnt);
- *mcqe = &(*mc)[zip->ai & 7];
- if ((++zip->ai & 7) == 0) {
- /* Invalidate consumed CQEs */
- idx = zip->ca;
- end = zip->na;
- while (idx != end) {
- (*rxq->cqes)[idx & cqe_cnt].op_own =
- MLX5_CQE_INVALIDATE;
- ++idx;
- }
- /*
- * Increment consumer index to skip the number
- * of CQEs consumed. Hardware leaves holes in
- * the CQ ring for software use.
- */
- zip->ca = zip->na;
- zip->na += 8;
- }
- if (unlikely(rxq->zip.ai == rxq->zip.cqe_cnt)) {
- /* Invalidate the rest */
- idx = zip->ca;
- end = zip->cq_ci;
-
- while (idx != end) {
- (*rxq->cqes)[idx & cqe_cnt].op_own =
- MLX5_CQE_INVALIDATE;
- ++idx;
- }
- rxq->cq_ci = zip->cq_ci;
- zip->ai = 0;
- }
- /*
- * No compressed data, get next CQE and verify if it is
- * compressed.
- */
- } else {
- int ret;
- int8_t op_own;
-
- ret = check_cqe(cqe, cqe_n, rxq->cq_ci);
- if (unlikely(ret != MLX5_CQE_STATUS_SW_OWN)) {
- if (unlikely(ret == MLX5_CQE_STATUS_ERR ||
- rxq->err_state)) {
- ret = mlx5_rx_err_handle(rxq, 0);
- if (ret == MLX5_CQE_STATUS_HW_OWN ||
- ret == -1)
- return 0;
- } else {
- return 0;
- }
- }
- ++rxq->cq_ci;
- op_own = cqe->op_own;
- if (MLX5_CQE_FORMAT(op_own) == MLX5_COMPRESSED) {
- volatile struct mlx5_mini_cqe8 (*mc)[8] =
- (volatile struct mlx5_mini_cqe8 (*)[8])
- (uintptr_t)(&(*rxq->cqes)
- [rxq->cq_ci &
- cqe_cnt].pkt_info);
-
- /* Fix endianness. */
- zip->cqe_cnt = rte_be_to_cpu_32(cqe->byte_cnt);
- /*
- * Current mini array position is the one
- * returned by check_cqe64().
- *
- * If completion comprises several mini arrays,
- * as a special case the second one is located
- * 7 CQEs after the initial CQE instead of 8
- * for subsequent ones.
- */
- zip->ca = rxq->cq_ci;
- zip->na = zip->ca + 7;
- /* Compute the next non compressed CQE. */
- --rxq->cq_ci;
- zip->cq_ci = rxq->cq_ci + zip->cqe_cnt;
- /* Get packet size to return. */
- len = rte_be_to_cpu_32((*mc)[0].byte_cnt);
- *mcqe = &(*mc)[0];
- zip->ai = 1;
- /* Prefetch all to be invalidated */
- idx = zip->ca;
- end = zip->cq_ci;
- while (idx != end) {
- rte_prefetch0(&(*rxq->cqes)[(idx) &
- cqe_cnt]);
- ++idx;
- }
- } else {
- len = rte_be_to_cpu_32(cqe->byte_cnt);
- }
- }
- if (unlikely(rxq->err_state)) {
- cqe = &(*rxq->cqes)[rxq->cq_ci & cqe_cnt];
- ++rxq->stats.idropped;
- } else {
- return len;
- }
- } while (1);
-}
-
-/**
- * Translate RX completion flags to offload flags.
- *
- * @param[in] cqe
- * Pointer to CQE.
- *
- * @return
- * Offload flags (ol_flags) for struct rte_mbuf.
- */
-static inline uint32_t
-rxq_cq_to_ol_flags(volatile struct mlx5_cqe *cqe)
-{
- uint32_t ol_flags = 0;
- uint16_t flags = rte_be_to_cpu_16(cqe->hdr_type_etc);
-
- ol_flags =
- TRANSPOSE(flags,
- MLX5_CQE_RX_L3_HDR_VALID,
- PKT_RX_IP_CKSUM_GOOD) |
- TRANSPOSE(flags,
- MLX5_CQE_RX_L4_HDR_VALID,
- PKT_RX_L4_CKSUM_GOOD);
- return ol_flags;
-}
-
-/**
- * Fill in mbuf fields from RX completion flags.
- * Note that pkt->ol_flags should be initialized outside of this function.
- *
- * @param rxq
- * Pointer to RX queue.
- * @param pkt
- * mbuf to fill.
- * @param cqe
- * CQE to process.
- * @param rss_hash_res
- * Packet RSS Hash result.
- */
-static inline void
-rxq_cq_to_mbuf(struct mlx5_rxq_data *rxq, struct rte_mbuf *pkt,
- volatile struct mlx5_cqe *cqe, uint32_t rss_hash_res)
-{
- /* Update packet information. */
- pkt->packet_type = rxq_cq_to_pkt_type(rxq, cqe);
- if (rss_hash_res && rxq->rss_hash) {
- pkt->hash.rss = rss_hash_res;
- pkt->ol_flags |= PKT_RX_RSS_HASH;
- }
- if (rxq->mark && MLX5_FLOW_MARK_IS_VALID(cqe->sop_drop_qpn)) {
- pkt->ol_flags |= PKT_RX_FDIR;
- if (cqe->sop_drop_qpn !=
- rte_cpu_to_be_32(MLX5_FLOW_MARK_DEFAULT)) {
- uint32_t mark = cqe->sop_drop_qpn;
-
- pkt->ol_flags |= PKT_RX_FDIR_ID;
- pkt->hash.fdir.hi = mlx5_flow_mark_get(mark);
- }
- }
- if (rxq->csum)
- pkt->ol_flags |= rxq_cq_to_ol_flags(cqe);
- if (rxq->vlan_strip &&
- (cqe->hdr_type_etc & rte_cpu_to_be_16(MLX5_CQE_VLAN_STRIPPED))) {
- pkt->ol_flags |= PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED;
- pkt->vlan_tci = rte_be_to_cpu_16(cqe->vlan_info);
- }
- if (rxq->hw_timestamp) {
- pkt->timestamp = rte_be_to_cpu_64(cqe->timestamp);
- pkt->ol_flags |= PKT_RX_TIMESTAMP;
- }
-}
-
-/**
- * DPDK callback for RX.
- *
- * @param dpdk_rxq
- * Generic pointer to RX queue structure.
- * @param[out] pkts
- * Array to store received packets.
- * @param pkts_n
- * Maximum number of packets in array.
- *
- * @return
- * Number of packets successfully received (<= pkts_n).
- */
-uint16_t
-mlx5_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n)
-{
- struct mlx5_rxq_data *rxq = dpdk_rxq;
- const unsigned int wqe_cnt = (1 << rxq->elts_n) - 1;
- const unsigned int cqe_cnt = (1 << rxq->cqe_n) - 1;
- const unsigned int sges_n = rxq->sges_n;
- struct rte_mbuf *pkt = NULL;
- struct rte_mbuf *seg = NULL;
- volatile struct mlx5_cqe *cqe =
- &(*rxq->cqes)[rxq->cq_ci & cqe_cnt];
- unsigned int i = 0;
- unsigned int rq_ci = rxq->rq_ci << sges_n;
- int len = 0; /* keep its value across iterations. */
-
- while (pkts_n) {
- unsigned int idx = rq_ci & wqe_cnt;
- volatile struct mlx5_wqe_data_seg *wqe =
- &((volatile struct mlx5_wqe_data_seg *)rxq->wqes)[idx];
- struct rte_mbuf *rep = (*rxq->elts)[idx];
- volatile struct mlx5_mini_cqe8 *mcqe = NULL;
- uint32_t rss_hash_res;
-
- if (pkt)
- NEXT(seg) = rep;
- seg = rep;
- rte_prefetch0(seg);
- rte_prefetch0(cqe);
- rte_prefetch0(wqe);
- rep = rte_mbuf_raw_alloc(rxq->mp);
- if (unlikely(rep == NULL)) {
- ++rxq->stats.rx_nombuf;
- if (!pkt) {
- /*
- * no buffers before we even started,
- * bail out silently.
- */
- break;
- }
- while (pkt != seg) {
- assert(pkt != (*rxq->elts)[idx]);
- rep = NEXT(pkt);
- NEXT(pkt) = NULL;
- NB_SEGS(pkt) = 1;
- rte_mbuf_raw_free(pkt);
- pkt = rep;
- }
- break;
- }
- if (!pkt) {
- cqe = &(*rxq->cqes)[rxq->cq_ci & cqe_cnt];
- len = mlx5_rx_poll_len(rxq, cqe, cqe_cnt, &mcqe);
- if (!len) {
- rte_mbuf_raw_free(rep);
- break;
- }
- pkt = seg;
- assert(len >= (rxq->crc_present << 2));
- pkt->ol_flags = 0;
- /* If compressed, take hash result from mini-CQE. */
- rss_hash_res = rte_be_to_cpu_32(mcqe == NULL ?
- cqe->rx_hash_res :
- mcqe->rx_hash_result);
- rxq_cq_to_mbuf(rxq, pkt, cqe, rss_hash_res);
- if (rxq->crc_present)
- len -= RTE_ETHER_CRC_LEN;
- PKT_LEN(pkt) = len;
- if (cqe->lro_num_seg > 1) {
- mlx5_lro_update_hdr
- (rte_pktmbuf_mtod(pkt, uint8_t *), cqe,
- len);
- pkt->ol_flags |= PKT_RX_LRO;
- pkt->tso_segsz = len / cqe->lro_num_seg;
- }
- }
- DATA_LEN(rep) = DATA_LEN(seg);
- PKT_LEN(rep) = PKT_LEN(seg);
- SET_DATA_OFF(rep, DATA_OFF(seg));
- PORT(rep) = PORT(seg);
- (*rxq->elts)[idx] = rep;
- /*
- * Fill NIC descriptor with the new buffer. The lkey and size
- * of the buffers are already known, only the buffer address
- * changes.
- */
- wqe->addr = rte_cpu_to_be_64(rte_pktmbuf_mtod(rep, uintptr_t));
- /* If there's only one MR, no need to replace LKey in WQE. */
- if (unlikely(mlx5_mr_btree_len(&rxq->mr_ctrl.cache_bh) > 1))
- wqe->lkey = mlx5_rx_mb2mr(rxq, rep);
- if (len > DATA_LEN(seg)) {
- len -= DATA_LEN(seg);
- ++NB_SEGS(pkt);
- ++rq_ci;
- continue;
- }
- DATA_LEN(seg) = len;
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Increment bytes counter. */
- rxq->stats.ibytes += PKT_LEN(pkt);
-#endif
- /* Return packet. */
- *(pkts++) = pkt;
- pkt = NULL;
- --pkts_n;
- ++i;
- /* Align consumer index to the next stride. */
- rq_ci >>= sges_n;
- ++rq_ci;
- rq_ci <<= sges_n;
- }
- if (unlikely((i == 0) && ((rq_ci >> sges_n) == rxq->rq_ci)))
- return 0;
- /* Update the consumer index. */
- rxq->rq_ci = rq_ci >> sges_n;
- rte_cio_wmb();
- *rxq->cq_db = rte_cpu_to_be_32(rxq->cq_ci);
- rte_cio_wmb();
- *rxq->rq_db = rte_cpu_to_be_32(rxq->rq_ci);
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Increment packets counter. */
- rxq->stats.ipackets += i;
-#endif
- return i;
-}
-
-/**
- * Update LRO packet TCP header.
- * The HW LRO feature doesn't update the TCP header after coalescing the
- * TCP segments but supplies information in CQE to fill it by SW.
- *
- * @param tcp
- * Pointer to the TCP header.
- * @param cqe
- * Pointer to the completion entry..
- * @param phcsum
- * The L3 pseudo-header checksum.
- */
-static inline void
-mlx5_lro_update_tcp_hdr(struct rte_tcp_hdr *restrict tcp,
- volatile struct mlx5_cqe *restrict cqe,
- uint32_t phcsum)
-{
- uint8_t l4_type = (rte_be_to_cpu_16(cqe->hdr_type_etc) &
- MLX5_CQE_L4_TYPE_MASK) >> MLX5_CQE_L4_TYPE_SHIFT;
- /*
- * The HW calculates only the TCP payload checksum, need to complete
- * the TCP header checksum and the L3 pseudo-header checksum.
- */
- uint32_t csum = phcsum + cqe->csum;
-
- if (l4_type == MLX5_L4_HDR_TYPE_TCP_EMPTY_ACK ||
- l4_type == MLX5_L4_HDR_TYPE_TCP_WITH_ACL) {
- tcp->tcp_flags |= RTE_TCP_ACK_FLAG;
- tcp->recv_ack = cqe->lro_ack_seq_num;
- tcp->rx_win = cqe->lro_tcp_win;
- }
- if (cqe->lro_tcppsh_abort_dupack & MLX5_CQE_LRO_PUSH_MASK)
- tcp->tcp_flags |= RTE_TCP_PSH_FLAG;
- tcp->cksum = 0;
- csum += rte_raw_cksum(tcp, (tcp->data_off & 0xF) * 4);
- csum = ((csum & 0xffff0000) >> 16) + (csum & 0xffff);
- csum = (~csum) & 0xffff;
- if (csum == 0)
- csum = 0xffff;
- tcp->cksum = csum;
-}
-
-/**
- * Update LRO packet headers.
- * The HW LRO feature doesn't update the L3/TCP headers after coalescing the
- * TCP segments but supply information in CQE to fill it by SW.
- *
- * @param padd
- * The packet address.
- * @param cqe
- * Pointer to the completion entry..
- * @param len
- * The packet length.
- */
-static inline void
-mlx5_lro_update_hdr(uint8_t *restrict padd,
- volatile struct mlx5_cqe *restrict cqe,
- uint32_t len)
-{
- union {
- struct rte_ether_hdr *eth;
- struct rte_vlan_hdr *vlan;
- struct rte_ipv4_hdr *ipv4;
- struct rte_ipv6_hdr *ipv6;
- struct rte_tcp_hdr *tcp;
- uint8_t *hdr;
- } h = {
- .hdr = padd,
- };
- uint16_t proto = h.eth->ether_type;
- uint32_t phcsum;
-
- h.eth++;
- while (proto == RTE_BE16(RTE_ETHER_TYPE_VLAN) ||
- proto == RTE_BE16(RTE_ETHER_TYPE_QINQ)) {
- proto = h.vlan->eth_proto;
- h.vlan++;
- }
- if (proto == RTE_BE16(RTE_ETHER_TYPE_IPV4)) {
- h.ipv4->time_to_live = cqe->lro_min_ttl;
- h.ipv4->total_length = rte_cpu_to_be_16(len - (h.hdr - padd));
- h.ipv4->hdr_checksum = 0;
- h.ipv4->hdr_checksum = rte_ipv4_cksum(h.ipv4);
- phcsum = rte_ipv4_phdr_cksum(h.ipv4, 0);
- h.ipv4++;
- } else {
- h.ipv6->hop_limits = cqe->lro_min_ttl;
- h.ipv6->payload_len = rte_cpu_to_be_16(len - (h.hdr - padd) -
- sizeof(*h.ipv6));
- phcsum = rte_ipv6_phdr_cksum(h.ipv6, 0);
- h.ipv6++;
- }
- mlx5_lro_update_tcp_hdr(h.tcp, cqe, phcsum);
-}
-
-void
-mlx5_mprq_buf_free_cb(void *addr __rte_unused, void *opaque)
-{
- struct mlx5_mprq_buf *buf = opaque;
-
- if (rte_atomic16_read(&buf->refcnt) == 1) {
- rte_mempool_put(buf->mp, buf);
- } else if (rte_atomic16_add_return(&buf->refcnt, -1) == 0) {
- rte_atomic16_set(&buf->refcnt, 1);
- rte_mempool_put(buf->mp, buf);
- }
-}
-
-void
-mlx5_mprq_buf_free(struct mlx5_mprq_buf *buf)
-{
- mlx5_mprq_buf_free_cb(NULL, buf);
-}
-
-static inline void
-mprq_buf_replace(struct mlx5_rxq_data *rxq, uint16_t rq_idx,
- const unsigned int strd_n)
-{
- struct mlx5_mprq_buf *rep = rxq->mprq_repl;
- volatile struct mlx5_wqe_data_seg *wqe =
- &((volatile struct mlx5_wqe_mprq *)rxq->wqes)[rq_idx].dseg;
- void *addr;
-
- assert(rep != NULL);
- /* Replace MPRQ buf. */
- (*rxq->mprq_bufs)[rq_idx] = rep;
- /* Replace WQE. */
- addr = mlx5_mprq_buf_addr(rep, strd_n);
- wqe->addr = rte_cpu_to_be_64((uintptr_t)addr);
- /* If there's only one MR, no need to replace LKey in WQE. */
- if (unlikely(mlx5_mr_btree_len(&rxq->mr_ctrl.cache_bh) > 1))
- wqe->lkey = mlx5_rx_addr2mr(rxq, (uintptr_t)addr);
- /* Stash a mbuf for next replacement. */
- if (likely(!rte_mempool_get(rxq->mprq_mp, (void **)&rep)))
- rxq->mprq_repl = rep;
- else
- rxq->mprq_repl = NULL;
-}
-
-/**
- * DPDK callback for RX with Multi-Packet RQ support.
- *
- * @param dpdk_rxq
- * Generic pointer to RX queue structure.
- * @param[out] pkts
- * Array to store received packets.
- * @param pkts_n
- * Maximum number of packets in array.
- *
- * @return
- * Number of packets successfully received (<= pkts_n).
- */
-uint16_t
-mlx5_rx_burst_mprq(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n)
-{
- struct mlx5_rxq_data *rxq = dpdk_rxq;
- const unsigned int strd_n = 1 << rxq->strd_num_n;
- const unsigned int strd_sz = 1 << rxq->strd_sz_n;
- const unsigned int strd_shift =
- MLX5_MPRQ_STRIDE_SHIFT_BYTE * rxq->strd_shift_en;
- const unsigned int cq_mask = (1 << rxq->cqe_n) - 1;
- const unsigned int wq_mask = (1 << rxq->elts_n) - 1;
- volatile struct mlx5_cqe *cqe = &(*rxq->cqes)[rxq->cq_ci & cq_mask];
- unsigned int i = 0;
- uint32_t rq_ci = rxq->rq_ci;
- uint16_t consumed_strd = rxq->consumed_strd;
- uint16_t headroom_sz = rxq->strd_headroom_en * RTE_PKTMBUF_HEADROOM;
- struct mlx5_mprq_buf *buf = (*rxq->mprq_bufs)[rq_ci & wq_mask];
-
- while (i < pkts_n) {
- struct rte_mbuf *pkt;
- void *addr;
- int ret;
- unsigned int len;
- uint16_t strd_cnt;
- uint16_t strd_idx;
- uint32_t offset;
- uint32_t byte_cnt;
- volatile struct mlx5_mini_cqe8 *mcqe = NULL;
- uint32_t rss_hash_res = 0;
- uint8_t lro_num_seg;
-
- if (consumed_strd == strd_n) {
- /* Replace WQE only if the buffer is still in use. */
- if (rte_atomic16_read(&buf->refcnt) > 1) {
- mprq_buf_replace(rxq, rq_ci & wq_mask, strd_n);
- /* Release the old buffer. */
- mlx5_mprq_buf_free(buf);
- } else if (unlikely(rxq->mprq_repl == NULL)) {
- struct mlx5_mprq_buf *rep;
-
- /*
- * Currently, the MPRQ mempool is out of buffer
- * and doing memcpy regardless of the size of Rx
- * packet. Retry allocation to get back to
- * normal.
- */
- if (!rte_mempool_get(rxq->mprq_mp,
- (void **)&rep))
- rxq->mprq_repl = rep;
- }
- /* Advance to the next WQE. */
- consumed_strd = 0;
- ++rq_ci;
- buf = (*rxq->mprq_bufs)[rq_ci & wq_mask];
- }
- cqe = &(*rxq->cqes)[rxq->cq_ci & cq_mask];
- ret = mlx5_rx_poll_len(rxq, cqe, cq_mask, &mcqe);
- if (!ret)
- break;
- byte_cnt = ret;
- strd_cnt = (byte_cnt & MLX5_MPRQ_STRIDE_NUM_MASK) >>
- MLX5_MPRQ_STRIDE_NUM_SHIFT;
- assert(strd_cnt);
- consumed_strd += strd_cnt;
- if (byte_cnt & MLX5_MPRQ_FILLER_MASK)
- continue;
- if (mcqe == NULL) {
- rss_hash_res = rte_be_to_cpu_32(cqe->rx_hash_res);
- strd_idx = rte_be_to_cpu_16(cqe->wqe_counter);
- } else {
- /* mini-CQE for MPRQ doesn't have hash result. */
- strd_idx = rte_be_to_cpu_16(mcqe->stride_idx);
- }
- assert(strd_idx < strd_n);
- assert(!((rte_be_to_cpu_16(cqe->wqe_id) ^ rq_ci) & wq_mask));
- lro_num_seg = cqe->lro_num_seg;
- /*
- * Currently configured to receive a packet per a stride. But if
- * MTU is adjusted through kernel interface, device could
- * consume multiple strides without raising an error. In this
- * case, the packet should be dropped because it is bigger than
- * the max_rx_pkt_len.
- */
- if (unlikely(!lro_num_seg && strd_cnt > 1)) {
- ++rxq->stats.idropped;
- continue;
- }
- pkt = rte_pktmbuf_alloc(rxq->mp);
- if (unlikely(pkt == NULL)) {
- ++rxq->stats.rx_nombuf;
- break;
- }
- len = (byte_cnt & MLX5_MPRQ_LEN_MASK) >> MLX5_MPRQ_LEN_SHIFT;
- assert((int)len >= (rxq->crc_present << 2));
- if (rxq->crc_present)
- len -= RTE_ETHER_CRC_LEN;
- offset = strd_idx * strd_sz + strd_shift;
- addr = RTE_PTR_ADD(mlx5_mprq_buf_addr(buf, strd_n), offset);
- /*
- * Memcpy packets to the target mbuf if:
- * - The size of packet is smaller than mprq_max_memcpy_len.
- * - Out of buffer in the Mempool for Multi-Packet RQ.
- */
- if (len <= rxq->mprq_max_memcpy_len || rxq->mprq_repl == NULL) {
- /*
- * When memcpy'ing packet due to out-of-buffer, the
- * packet must be smaller than the target mbuf.
- */
- if (unlikely(rte_pktmbuf_tailroom(pkt) < len)) {
- rte_pktmbuf_free_seg(pkt);
- ++rxq->stats.idropped;
- continue;
- }
- rte_memcpy(rte_pktmbuf_mtod(pkt, void *), addr, len);
- DATA_LEN(pkt) = len;
- } else {
- rte_iova_t buf_iova;
- struct rte_mbuf_ext_shared_info *shinfo;
- uint16_t buf_len = strd_cnt * strd_sz;
- void *buf_addr;
-
- /* Increment the refcnt of the whole chunk. */
- rte_atomic16_add_return(&buf->refcnt, 1);
- assert((uint16_t)rte_atomic16_read(&buf->refcnt) <=
- strd_n + 1);
- buf_addr = RTE_PTR_SUB(addr, headroom_sz);
- /*
- * MLX5 device doesn't use iova but it is necessary in a
- * case where the Rx packet is transmitted via a
- * different PMD.
- */
- buf_iova = rte_mempool_virt2iova(buf) +
- RTE_PTR_DIFF(buf_addr, buf);
- shinfo = &buf->shinfos[strd_idx];
- rte_mbuf_ext_refcnt_set(shinfo, 1);
- /*
- * EXT_ATTACHED_MBUF will be set to pkt->ol_flags when
- * attaching the stride to mbuf and more offload flags
- * will be added below by calling rxq_cq_to_mbuf().
- * Other fields will be overwritten.
- */
- rte_pktmbuf_attach_extbuf(pkt, buf_addr, buf_iova,
- buf_len, shinfo);
- /* Set mbuf head-room. */
- pkt->data_off = headroom_sz;
- assert(pkt->ol_flags == EXT_ATTACHED_MBUF);
- /*
- * Prevent potential overflow due to MTU change through
- * kernel interface.
- */
- if (unlikely(rte_pktmbuf_tailroom(pkt) < len)) {
- rte_pktmbuf_free_seg(pkt);
- ++rxq->stats.idropped;
- continue;
- }
- DATA_LEN(pkt) = len;
- /*
- * LRO packet may consume all the stride memory, in this
- * case packet head-room space is not guaranteed so must
- * to add an empty mbuf for the head-room.
- */
- if (!rxq->strd_headroom_en) {
- struct rte_mbuf *headroom_mbuf =
- rte_pktmbuf_alloc(rxq->mp);
-
- if (unlikely(headroom_mbuf == NULL)) {
- rte_pktmbuf_free_seg(pkt);
- ++rxq->stats.rx_nombuf;
- break;
- }
- PORT(pkt) = rxq->port_id;
- NEXT(headroom_mbuf) = pkt;
- pkt = headroom_mbuf;
- NB_SEGS(pkt) = 2;
- }
- }
- rxq_cq_to_mbuf(rxq, pkt, cqe, rss_hash_res);
- if (lro_num_seg > 1) {
- mlx5_lro_update_hdr(addr, cqe, len);
- pkt->ol_flags |= PKT_RX_LRO;
- pkt->tso_segsz = strd_sz;
- }
- PKT_LEN(pkt) = len;
- PORT(pkt) = rxq->port_id;
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Increment bytes counter. */
- rxq->stats.ibytes += PKT_LEN(pkt);
-#endif
- /* Return packet. */
- *(pkts++) = pkt;
- ++i;
- }
- /* Update the consumer indexes. */
- rxq->consumed_strd = consumed_strd;
- rte_cio_wmb();
- *rxq->cq_db = rte_cpu_to_be_32(rxq->cq_ci);
- if (rq_ci != rxq->rq_ci) {
- rxq->rq_ci = rq_ci;
- rte_cio_wmb();
- *rxq->rq_db = rte_cpu_to_be_32(rxq->rq_ci);
- }
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Increment packets counter. */
- rxq->stats.ipackets += i;
-#endif
- return i;
-}
-
-/**
- * Dummy DPDK callback for TX.
- *
- * This function is used to temporarily replace the real callback during
- * unsafe control operations on the queue, or in case of error.
- *
- * @param dpdk_txq
- * Generic pointer to TX queue structure.
- * @param[in] pkts
- * Packets to transmit.
- * @param pkts_n
- * Number of packets in array.
- *
- * @return
- * Number of packets successfully transmitted (<= pkts_n).
- */
-uint16_t
-removed_tx_burst(void *dpdk_txq __rte_unused,
- struct rte_mbuf **pkts __rte_unused,
- uint16_t pkts_n __rte_unused)
-{
- rte_mb();
- return 0;
-}
-
-/**
- * Dummy DPDK callback for RX.
- *
- * This function is used to temporarily replace the real callback during
- * unsafe control operations on the queue, or in case of error.
- *
- * @param dpdk_rxq
- * Generic pointer to RX queue structure.
- * @param[out] pkts
- * Array to store received packets.
- * @param pkts_n
- * Maximum number of packets in array.
- *
- * @return
- * Number of packets successfully received (<= pkts_n).
- */
-uint16_t
-removed_rx_burst(void *dpdk_txq __rte_unused,
- struct rte_mbuf **pkts __rte_unused,
- uint16_t pkts_n __rte_unused)
-{
- rte_mb();
- return 0;
-}
-
-/*
- * Vectorized Rx/Tx routines are not compiled in when required vector
- * instructions are not supported on a target architecture. The following null
- * stubs are needed for linkage when those are not included outside of this file
- * (e.g. mlx5_rxtx_vec_sse.c for x86).
- */
-
-__rte_weak uint16_t
-mlx5_rx_burst_vec(void *dpdk_txq __rte_unused,
- struct rte_mbuf **pkts __rte_unused,
- uint16_t pkts_n __rte_unused)
-{
- return 0;
-}
-
-__rte_weak int
-mlx5_rxq_check_vec_support(struct mlx5_rxq_data *rxq __rte_unused)
-{
- return -ENOTSUP;
-}
-
-__rte_weak int
-mlx5_check_vec_rx_support(struct rte_eth_dev *dev __rte_unused)
-{
- return -ENOTSUP;
-}
-
-/**
- * Free the mbufs from the linear array of pointers.
- *
- * @param pkts
- * Pointer to array of packets to be free.
- * @param pkts_n
- * Number of packets to be freed.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_free_mbuf(struct rte_mbuf **restrict pkts,
- unsigned int pkts_n,
- unsigned int olx __rte_unused)
-{
- struct rte_mempool *pool = NULL;
- struct rte_mbuf **p_free = NULL;
- struct rte_mbuf *mbuf;
- unsigned int n_free = 0;
-
- /*
- * The implemented algorithm eliminates
- * copying pointers to temporary array
- * for rte_mempool_put_bulk() calls.
- */
- assert(pkts);
- assert(pkts_n);
- for (;;) {
- for (;;) {
- /*
- * Decrement mbuf reference counter, detach
- * indirect and external buffers if needed.
- */
- mbuf = rte_pktmbuf_prefree_seg(*pkts);
- if (likely(mbuf != NULL)) {
- assert(mbuf == *pkts);
- if (likely(n_free != 0)) {
- if (unlikely(pool != mbuf->pool))
- /* From different pool. */
- break;
- } else {
- /* Start new scan array. */
- pool = mbuf->pool;
- p_free = pkts;
- }
- ++n_free;
- ++pkts;
- --pkts_n;
- if (unlikely(pkts_n == 0)) {
- mbuf = NULL;
- break;
- }
- } else {
- /*
- * This happens if mbuf is still referenced.
- * We can't put it back to the pool, skip.
- */
- ++pkts;
- --pkts_n;
- if (unlikely(n_free != 0))
- /* There is some array to free.*/
- break;
- if (unlikely(pkts_n == 0))
- /* Last mbuf, nothing to free. */
- return;
- }
- }
- for (;;) {
- /*
- * This loop is implemented to avoid multiple
- * inlining of rte_mempool_put_bulk().
- */
- assert(pool);
- assert(p_free);
- assert(n_free);
- /*
- * Free the array of pre-freed mbufs
- * belonging to the same memory pool.
- */
- rte_mempool_put_bulk(pool, (void *)p_free, n_free);
- if (unlikely(mbuf != NULL)) {
- /* There is the request to start new scan. */
- pool = mbuf->pool;
- p_free = pkts++;
- n_free = 1;
- --pkts_n;
- if (likely(pkts_n != 0))
- break;
- /*
- * This is the last mbuf to be freed.
- * Do one more loop iteration to complete.
- * This is rare case of the last unique mbuf.
- */
- mbuf = NULL;
- continue;
- }
- if (likely(pkts_n == 0))
- return;
- n_free = 0;
- break;
- }
- }
-}
-
-/**
- * Free the mbuf from the elts ring buffer till new tail.
- *
- * @param txq
- * Pointer to Tx queue structure.
- * @param tail
- * Index in elts to free up to, becomes new elts tail.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_free_elts(struct mlx5_txq_data *restrict txq,
- uint16_t tail,
- unsigned int olx __rte_unused)
-{
- uint16_t n_elts = tail - txq->elts_tail;
-
- assert(n_elts);
- assert(n_elts <= txq->elts_s);
- /*
- * Implement a loop to support ring buffer wraparound
- * with single inlining of mlx5_tx_free_mbuf().
- */
- do {
- unsigned int part;
-
- part = txq->elts_s - (txq->elts_tail & txq->elts_m);
- part = RTE_MIN(part, n_elts);
- assert(part);
- assert(part <= txq->elts_s);
- mlx5_tx_free_mbuf(&txq->elts[txq->elts_tail & txq->elts_m],
- part, olx);
- txq->elts_tail += part;
- n_elts -= part;
- } while (n_elts);
-}
-
-/**
- * Store the mbuf being sent into elts ring buffer.
- * On Tx completion these mbufs will be freed.
- *
- * @param txq
- * Pointer to Tx queue structure.
- * @param pkts
- * Pointer to array of packets to be stored.
- * @param pkts_n
- * Number of packets to be stored.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_copy_elts(struct mlx5_txq_data *restrict txq,
- struct rte_mbuf **restrict pkts,
- unsigned int pkts_n,
- unsigned int olx __rte_unused)
-{
- unsigned int part;
- struct rte_mbuf **elts = (struct rte_mbuf **)txq->elts;
-
- assert(pkts);
- assert(pkts_n);
- part = txq->elts_s - (txq->elts_head & txq->elts_m);
- assert(part);
- assert(part <= txq->elts_s);
- /* This code is a good candidate for vectorizing with SIMD. */
- rte_memcpy((void *)(elts + (txq->elts_head & txq->elts_m)),
- (void *)pkts,
- RTE_MIN(part, pkts_n) * sizeof(struct rte_mbuf *));
- txq->elts_head += pkts_n;
- if (unlikely(part < pkts_n))
- /* The copy is wrapping around the elts array. */
- rte_memcpy((void *)elts, (void *)(pkts + part),
- (pkts_n - part) * sizeof(struct rte_mbuf *));
-}
-
-/**
- * Update completion queue consuming index via doorbell
- * and flush the completed data buffers.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param valid CQE pointer
- * if not NULL update txq->wqe_pi and flush the buffers
- * @param itail
- * if not negative - flush the buffers till this index.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_comp_flush(struct mlx5_txq_data *restrict txq,
- volatile struct mlx5_cqe *last_cqe,
- int itail,
- unsigned int olx __rte_unused)
-{
- uint16_t tail;
-
- if (likely(last_cqe != NULL)) {
- txq->wqe_pi = rte_be_to_cpu_16(last_cqe->wqe_counter);
- tail = ((volatile struct mlx5_wqe_cseg *)
- (txq->wqes + (txq->wqe_pi & txq->wqe_m)))->misc;
- } else if (itail >= 0) {
- tail = (uint16_t)itail;
- } else {
- return;
- }
- rte_compiler_barrier();
- *txq->cq_db = rte_cpu_to_be_32(txq->cq_ci);
- if (likely(tail != txq->elts_tail)) {
- mlx5_tx_free_elts(txq, tail, olx);
- assert(tail == txq->elts_tail);
- }
-}
-
-/**
- * Manage TX completions. This routine checks the CQ for
- * arrived CQEs, deduces the last accomplished WQE in SQ,
- * updates SQ producing index and frees all completed mbufs.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * NOTE: not inlined intentionally, it makes tx_burst
- * routine smaller, simple and faster - from experiments.
- */
-static void
-mlx5_tx_handle_completion(struct mlx5_txq_data *restrict txq,
- unsigned int olx __rte_unused)
-{
- unsigned int count = MLX5_TX_COMP_MAX_CQE;
- volatile struct mlx5_cqe *last_cqe = NULL;
- int ret;
-
- static_assert(MLX5_CQE_STATUS_HW_OWN < 0, "Must be negative value");
- static_assert(MLX5_CQE_STATUS_SW_OWN < 0, "Must be negative value");
- do {
- volatile struct mlx5_cqe *cqe;
-
- cqe = &txq->cqes[txq->cq_ci & txq->cqe_m];
- ret = check_cqe(cqe, txq->cqe_s, txq->cq_ci);
- if (unlikely(ret != MLX5_CQE_STATUS_SW_OWN)) {
- if (likely(ret != MLX5_CQE_STATUS_ERR)) {
- /* No new CQEs in completion queue. */
- assert(ret == MLX5_CQE_STATUS_HW_OWN);
- break;
- }
- /*
- * Some error occurred, try to restart.
- * We have no barrier after WQE related Doorbell
- * written, make sure all writes are completed
- * here, before we might perform SQ reset.
- */
- rte_wmb();
- ret = mlx5_tx_error_cqe_handle
- (txq, (volatile struct mlx5_err_cqe *)cqe);
- /*
- * Flush buffers, update consuming index
- * if recovery succeeded. Otherwise
- * just try to recover later.
- */
- last_cqe = NULL;
- break;
- }
- /* Normal transmit completion. */
- ++txq->cq_ci;
- last_cqe = cqe;
-#ifndef NDEBUG
- if (txq->cq_pi)
- --txq->cq_pi;
-#endif
- /*
- * We have to restrict the amount of processed CQEs
- * in one tx_burst routine call. The CQ may be large
- * and many CQEs may be updated by the NIC in one
- * transaction. Buffers freeing is time consuming,
- * multiple iterations may introduce significant
- * latency.
- */
- } while (--count);
- mlx5_tx_comp_flush(txq, last_cqe, ret, olx);
-}
-
-/**
- * Check if the completion request flag should be set in the last WQE.
- * Both pushed mbufs and WQEs are monitored and the completion request
- * flag is set if any of thresholds is reached.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param multi,
- * Routine is called from multi-segment sending loop,
- * do not correct the elts_head according to the pkts_copy.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_request_completion(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- bool multi,
- unsigned int olx)
-{
- uint16_t head = txq->elts_head;
- unsigned int part;
-
- part = (MLX5_TXOFF_CONFIG(INLINE) || multi) ?
- 0 : loc->pkts_sent - loc->pkts_copy;
- head += part;
- if ((uint16_t)(head - txq->elts_comp) >= MLX5_TX_COMP_THRESH ||
- (MLX5_TXOFF_CONFIG(INLINE) &&
- (uint16_t)(txq->wqe_ci - txq->wqe_comp) >= txq->wqe_thres)) {
- volatile struct mlx5_wqe *last = loc->wqe_last;
-
- txq->elts_comp = head;
- if (MLX5_TXOFF_CONFIG(INLINE))
- txq->wqe_comp = txq->wqe_ci;
- /* Request unconditional completion on last WQE. */
- last->cseg.flags = RTE_BE32(MLX5_COMP_ALWAYS <<
- MLX5_COMP_MODE_OFFSET);
- /* Save elts_head in unused "immediate" field of WQE. */
- last->cseg.misc = head;
- /*
- * A CQE slot must always be available. Count the
- * issued CEQ "always" request instead of production
- * index due to here can be CQE with errors and
- * difference with ci may become inconsistent.
- */
- assert(txq->cqe_s > ++txq->cq_pi);
- }
-}
-
-/**
- * DPDK callback to check the status of a tx descriptor.
- *
- * @param tx_queue
- * The tx queue.
- * @param[in] offset
- * The index of the descriptor in the ring.
- *
- * @return
- * The status of the tx descriptor.
- */
-int
-mlx5_tx_descriptor_status(void *tx_queue, uint16_t offset)
-{
- struct mlx5_txq_data *restrict txq = tx_queue;
- uint16_t used;
-
- mlx5_tx_handle_completion(txq, 0);
- used = txq->elts_head - txq->elts_tail;
- if (offset < used)
- return RTE_ETH_TX_DESC_FULL;
- return RTE_ETH_TX_DESC_DONE;
-}
-
-/**
- * Build the Control Segment with specified opcode:
- * - MLX5_OPCODE_SEND
- * - MLX5_OPCODE_ENHANCED_MPSW
- * - MLX5_OPCODE_TSO
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param wqe
- * Pointer to WQE to fill with built Control Segment.
- * @param ds
- * Supposed length of WQE in segments.
- * @param opcode
- * SQ WQE opcode to put into Control Segment.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_cseg_init(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc __rte_unused,
- struct mlx5_wqe *restrict wqe,
- unsigned int ds,
- unsigned int opcode,
- unsigned int olx __rte_unused)
-{
- struct mlx5_wqe_cseg *restrict cs = &wqe->cseg;
-
- cs->opcode = rte_cpu_to_be_32((txq->wqe_ci << 8) | opcode);
- cs->sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
- cs->flags = RTE_BE32(MLX5_COMP_ONLY_FIRST_ERR <<
- MLX5_COMP_MODE_OFFSET);
- cs->misc = RTE_BE32(0);
-}
-
-/**
- * Build the Ethernet Segment without inlined data.
- * Supports Software Parser, Checksums and VLAN
- * insertion Tx offload features.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param wqe
- * Pointer to WQE to fill with built Ethernet Segment.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_eseg_none(struct mlx5_txq_data *restrict txq __rte_unused,
- struct mlx5_txq_local *restrict loc,
- struct mlx5_wqe *restrict wqe,
- unsigned int olx)
-{
- struct mlx5_wqe_eseg *restrict es = &wqe->eseg;
- uint32_t csum;
-
- /*
- * Calculate and set check sum flags first, dword field
- * in segment may be shared with Software Parser flags.
- */
- csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
- es->flags = rte_cpu_to_le_32(csum);
- /*
- * Calculate and set Software Parser offsets and flags.
- * These flags a set for custom UDP and IP tunnel packets.
- */
- es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
- /* Fill metadata field if needed. */
- es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
- loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
- *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
- /* Engage VLAN tag insertion feature if requested. */
- if (MLX5_TXOFF_CONFIG(VLAN) &&
- loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
- /*
- * We should get here only if device support
- * this feature correctly.
- */
- assert(txq->vlan_en);
- es->inline_hdr = rte_cpu_to_be_32(MLX5_ETH_WQE_VLAN_INSERT |
- loc->mbuf->vlan_tci);
- } else {
- es->inline_hdr = RTE_BE32(0);
- }
-}
-
-/**
- * Build the Ethernet Segment with minimal inlined data
- * of MLX5_ESEG_MIN_INLINE_SIZE bytes length. This is
- * used to fill the gap in single WQEBB WQEs.
- * Supports Software Parser, Checksums and VLAN
- * insertion Tx offload features.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param wqe
- * Pointer to WQE to fill with built Ethernet Segment.
- * @param vlan
- * Length of VLAN tag insertion if any.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_eseg_dmin(struct mlx5_txq_data *restrict txq __rte_unused,
- struct mlx5_txq_local *restrict loc,
- struct mlx5_wqe *restrict wqe,
- unsigned int vlan,
- unsigned int olx)
-{
- struct mlx5_wqe_eseg *restrict es = &wqe->eseg;
- uint32_t csum;
- uint8_t *psrc, *pdst;
-
- /*
- * Calculate and set check sum flags first, dword field
- * in segment may be shared with Software Parser flags.
- */
- csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
- es->flags = rte_cpu_to_le_32(csum);
- /*
- * Calculate and set Software Parser offsets and flags.
- * These flags a set for custom UDP and IP tunnel packets.
- */
- es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
- /* Fill metadata field if needed. */
- es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
- loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
- *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
- static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
- (sizeof(uint16_t) +
- sizeof(rte_v128u32_t)),
- "invalid Ethernet Segment data size");
- static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
- (sizeof(uint16_t) +
- sizeof(struct rte_vlan_hdr) +
- 2 * RTE_ETHER_ADDR_LEN),
- "invalid Ethernet Segment data size");
- psrc = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
- es->inline_hdr_sz = RTE_BE16(MLX5_ESEG_MIN_INLINE_SIZE);
- es->inline_data = *(unaligned_uint16_t *)psrc;
- psrc += sizeof(uint16_t);
- pdst = (uint8_t *)(es + 1);
- if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
- /* Implement VLAN tag insertion as part inline data. */
- memcpy(pdst, psrc, 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t));
- pdst += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
- psrc += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
- /* Insert VLAN ethertype + VLAN tag. */
- *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
- ((RTE_ETHER_TYPE_VLAN << 16) |
- loc->mbuf->vlan_tci);
- pdst += sizeof(struct rte_vlan_hdr);
- /* Copy the rest two bytes from packet data. */
- assert(pdst == RTE_PTR_ALIGN(pdst, sizeof(uint16_t)));
- *(uint16_t *)pdst = *(unaligned_uint16_t *)psrc;
- } else {
- /* Fill the gap in the title WQEBB with inline data. */
- rte_mov16(pdst, psrc);
- }
-}
-
-/**
- * Build the Ethernet Segment with entire packet
- * data inlining. Checks the boundary of WQEBB and
- * ring buffer wrapping, supports Software Parser,
- * Checksums and VLAN insertion Tx offload features.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param wqe
- * Pointer to WQE to fill with built Ethernet Segment.
- * @param vlan
- * Length of VLAN tag insertion if any.
- * @param inlen
- * Length of data to inline (VLAN included, if any).
- * @param tso
- * TSO flag, set mss field from the packet.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * Pointer to the next Data Segment (aligned and wrapped around).
- */
-static __rte_always_inline struct mlx5_wqe_dseg *
-mlx5_tx_eseg_data(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- struct mlx5_wqe *restrict wqe,
- unsigned int vlan,
- unsigned int inlen,
- unsigned int tso,
- unsigned int olx)
-{
- struct mlx5_wqe_eseg *restrict es = &wqe->eseg;
- uint32_t csum;
- uint8_t *psrc, *pdst;
- unsigned int part;
-
- /*
- * Calculate and set check sum flags first, dword field
- * in segment may be shared with Software Parser flags.
- */
- csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
- if (tso) {
- csum <<= 24;
- csum |= loc->mbuf->tso_segsz;
- es->flags = rte_cpu_to_be_32(csum);
- } else {
- es->flags = rte_cpu_to_le_32(csum);
- }
- /*
- * Calculate and set Software Parser offsets and flags.
- * These flags a set for custom UDP and IP tunnel packets.
- */
- es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
- /* Fill metadata field if needed. */
- es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
- loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
- *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
- static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
- (sizeof(uint16_t) +
- sizeof(rte_v128u32_t)),
- "invalid Ethernet Segment data size");
- static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
- (sizeof(uint16_t) +
- sizeof(struct rte_vlan_hdr) +
- 2 * RTE_ETHER_ADDR_LEN),
- "invalid Ethernet Segment data size");
- psrc = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
- es->inline_hdr_sz = rte_cpu_to_be_16(inlen);
- es->inline_data = *(unaligned_uint16_t *)psrc;
- psrc += sizeof(uint16_t);
- pdst = (uint8_t *)(es + 1);
- if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
- /* Implement VLAN tag insertion as part inline data. */
- memcpy(pdst, psrc, 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t));
- pdst += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
- psrc += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
- /* Insert VLAN ethertype + VLAN tag. */
- *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
- ((RTE_ETHER_TYPE_VLAN << 16) |
- loc->mbuf->vlan_tci);
- pdst += sizeof(struct rte_vlan_hdr);
- /* Copy the rest two bytes from packet data. */
- assert(pdst == RTE_PTR_ALIGN(pdst, sizeof(uint16_t)));
- *(uint16_t *)pdst = *(unaligned_uint16_t *)psrc;
- psrc += sizeof(uint16_t);
- } else {
- /* Fill the gap in the title WQEBB with inline data. */
- rte_mov16(pdst, psrc);
- psrc += sizeof(rte_v128u32_t);
- }
- pdst = (uint8_t *)(es + 2);
- assert(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
- assert(pdst < (uint8_t *)txq->wqes_end);
- inlen -= MLX5_ESEG_MIN_INLINE_SIZE;
- if (!inlen) {
- assert(pdst == RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE));
- return (struct mlx5_wqe_dseg *)pdst;
- }
- /*
- * The WQEBB space availability is checked by caller.
- * Here we should be aware of WQE ring buffer wraparound only.
- */
- part = (uint8_t *)txq->wqes_end - pdst;
- part = RTE_MIN(part, inlen);
- do {
- rte_memcpy(pdst, psrc, part);
- inlen -= part;
- if (likely(!inlen)) {
- /*
- * If return value is not used by the caller
- * the code below will be optimized out.
- */
- pdst += part;
- pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
- if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
- pdst = (uint8_t *)txq->wqes;
- return (struct mlx5_wqe_dseg *)pdst;
- }
- pdst = (uint8_t *)txq->wqes;
- psrc += part;
- part = inlen;
- } while (true);
-}
-
-/**
- * Copy data from chain of mbuf to the specified linear buffer.
- * Checksums and VLAN insertion Tx offload features. If data
- * from some mbuf copied completely this mbuf is freed. Local
- * structure is used to keep the byte stream state.
- *
- * @param pdst
- * Pointer to the destination linear buffer.
- * @param loc
- * Pointer to burst routine local context.
- * @param len
- * Length of data to be copied.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_mseg_memcpy(uint8_t *pdst,
- struct mlx5_txq_local *restrict loc,
- unsigned int len,
- unsigned int olx __rte_unused)
-{
- struct rte_mbuf *mbuf;
- unsigned int part, dlen;
- uint8_t *psrc;
-
- assert(len);
- do {
- /* Allow zero length packets, must check first. */
- dlen = rte_pktmbuf_data_len(loc->mbuf);
- if (dlen <= loc->mbuf_off) {
- /* Exhausted packet, just free. */
- mbuf = loc->mbuf;
- loc->mbuf = mbuf->next;
- rte_pktmbuf_free_seg(mbuf);
- loc->mbuf_off = 0;
- assert(loc->mbuf_nseg > 1);
- assert(loc->mbuf);
- --loc->mbuf_nseg;
- continue;
- }
- dlen -= loc->mbuf_off;
- psrc = rte_pktmbuf_mtod_offset(loc->mbuf, uint8_t *,
- loc->mbuf_off);
- part = RTE_MIN(len, dlen);
- rte_memcpy(pdst, psrc, part);
- loc->mbuf_off += part;
- len -= part;
- if (!len) {
- if (loc->mbuf_off >= rte_pktmbuf_data_len(loc->mbuf)) {
- loc->mbuf_off = 0;
- /* Exhausted packet, just free. */
- mbuf = loc->mbuf;
- loc->mbuf = mbuf->next;
- rte_pktmbuf_free_seg(mbuf);
- loc->mbuf_off = 0;
- assert(loc->mbuf_nseg >= 1);
- --loc->mbuf_nseg;
- }
- return;
- }
- pdst += part;
- } while (true);
-}
-
-/**
- * Build the Ethernet Segment with inlined data from
- * multi-segment packet. Checks the boundary of WQEBB
- * and ring buffer wrapping, supports Software Parser,
- * Checksums and VLAN insertion Tx offload features.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param wqe
- * Pointer to WQE to fill with built Ethernet Segment.
- * @param vlan
- * Length of VLAN tag insertion if any.
- * @param inlen
- * Length of data to inline (VLAN included, if any).
- * @param tso
- * TSO flag, set mss field from the packet.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * Pointer to the next Data Segment (aligned and
- * possible NOT wrapped around - caller should do
- * wrapping check on its own).
- */
-static __rte_always_inline struct mlx5_wqe_dseg *
-mlx5_tx_eseg_mdat(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- struct mlx5_wqe *restrict wqe,
- unsigned int vlan,
- unsigned int inlen,
- unsigned int tso,
- unsigned int olx)
-{
- struct mlx5_wqe_eseg *restrict es = &wqe->eseg;
- uint32_t csum;
- uint8_t *pdst;
- unsigned int part;
-
- /*
- * Calculate and set check sum flags first, uint32_t field
- * in segment may be shared with Software Parser flags.
- */
- csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
- if (tso) {
- csum <<= 24;
- csum |= loc->mbuf->tso_segsz;
- es->flags = rte_cpu_to_be_32(csum);
- } else {
- es->flags = rte_cpu_to_le_32(csum);
- }
- /*
- * Calculate and set Software Parser offsets and flags.
- * These flags a set for custom UDP and IP tunnel packets.
- */
- es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
- /* Fill metadata field if needed. */
- es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
- loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
- *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
- static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
- (sizeof(uint16_t) +
- sizeof(rte_v128u32_t)),
- "invalid Ethernet Segment data size");
- static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
- (sizeof(uint16_t) +
- sizeof(struct rte_vlan_hdr) +
- 2 * RTE_ETHER_ADDR_LEN),
- "invalid Ethernet Segment data size");
- assert(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
- es->inline_hdr_sz = rte_cpu_to_be_16(inlen);
- pdst = (uint8_t *)&es->inline_data;
- if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
- /* Implement VLAN tag insertion as part inline data. */
- mlx5_tx_mseg_memcpy(pdst, loc, 2 * RTE_ETHER_ADDR_LEN, olx);
- pdst += 2 * RTE_ETHER_ADDR_LEN;
- *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
- ((RTE_ETHER_TYPE_VLAN << 16) |
- loc->mbuf->vlan_tci);
- pdst += sizeof(struct rte_vlan_hdr);
- inlen -= 2 * RTE_ETHER_ADDR_LEN + sizeof(struct rte_vlan_hdr);
- }
- assert(pdst < (uint8_t *)txq->wqes_end);
- /*
- * The WQEBB space availability is checked by caller.
- * Here we should be aware of WQE ring buffer wraparound only.
- */
- part = (uint8_t *)txq->wqes_end - pdst;
- part = RTE_MIN(part, inlen);
- assert(part);
- do {
- mlx5_tx_mseg_memcpy(pdst, loc, part, olx);
- inlen -= part;
- if (likely(!inlen)) {
- pdst += part;
- pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
- return (struct mlx5_wqe_dseg *)pdst;
- }
- pdst = (uint8_t *)txq->wqes;
- part = inlen;
- } while (true);
-}
-
-/**
- * Build the Data Segment of pointer type.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param dseg
- * Pointer to WQE to fill with built Data Segment.
- * @param buf
- * Data buffer to point.
- * @param len
- * Data buffer length.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_dseg_ptr(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- struct mlx5_wqe_dseg *restrict dseg,
- uint8_t *buf,
- unsigned int len,
- unsigned int olx __rte_unused)
-
-{
- assert(len);
- dseg->bcount = rte_cpu_to_be_32(len);
- dseg->lkey = mlx5_tx_mb2mr(txq, loc->mbuf);
- dseg->pbuf = rte_cpu_to_be_64((uintptr_t)buf);
-}
-
-/**
- * Build the Data Segment of pointer type or inline
- * if data length is less than buffer in minimal
- * Data Segment size.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param dseg
- * Pointer to WQE to fill with built Data Segment.
- * @param buf
- * Data buffer to point.
- * @param len
- * Data buffer length.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- */
-static __rte_always_inline void
-mlx5_tx_dseg_iptr(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- struct mlx5_wqe_dseg *restrict dseg,
- uint8_t *buf,
- unsigned int len,
- unsigned int olx __rte_unused)
-
-{
- uintptr_t dst, src;
-
- assert(len);
- if (len > MLX5_DSEG_MIN_INLINE_SIZE) {
- dseg->bcount = rte_cpu_to_be_32(len);
- dseg->lkey = mlx5_tx_mb2mr(txq, loc->mbuf);
- dseg->pbuf = rte_cpu_to_be_64((uintptr_t)buf);
-
- return;
- }
- dseg->bcount = rte_cpu_to_be_32(len | MLX5_ETH_WQE_DATA_INLINE);
- /* Unrolled implementation of generic rte_memcpy. */
- dst = (uintptr_t)&dseg->inline_data[0];
- src = (uintptr_t)buf;
- if (len & 0x08) {
-#ifdef RTE_ARCH_STRICT_ALIGN
- assert(dst == RTE_PTR_ALIGN(dst, sizeof(uint32_t)));
- *(uint32_t *)dst = *(unaligned_uint32_t *)src;
- dst += sizeof(uint32_t);
- src += sizeof(uint32_t);
- *(uint32_t *)dst = *(unaligned_uint32_t *)src;
- dst += sizeof(uint32_t);
- src += sizeof(uint32_t);
-#else
- *(uint64_t *)dst = *(unaligned_uint64_t *)src;
- dst += sizeof(uint64_t);
- src += sizeof(uint64_t);
-#endif
- }
- if (len & 0x04) {
- *(uint32_t *)dst = *(unaligned_uint32_t *)src;
- dst += sizeof(uint32_t);
- src += sizeof(uint32_t);
- }
- if (len & 0x02) {
- *(uint16_t *)dst = *(unaligned_uint16_t *)src;
- dst += sizeof(uint16_t);
- src += sizeof(uint16_t);
- }
- if (len & 0x01)
- *(uint8_t *)dst = *(uint8_t *)src;
-}
-
-/**
- * Build the Data Segment of inlined data from single
- * segment packet, no VLAN insertion.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param dseg
- * Pointer to WQE to fill with built Data Segment.
- * @param buf
- * Data buffer to point.
- * @param len
- * Data buffer length.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * Pointer to the next Data Segment after inlined data.
- * Ring buffer wraparound check is needed. We do not
- * do it here because it may not be needed for the
- * last packet in the eMPW session.
- */
-static __rte_always_inline struct mlx5_wqe_dseg *
-mlx5_tx_dseg_empw(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc __rte_unused,
- struct mlx5_wqe_dseg *restrict dseg,
- uint8_t *buf,
- unsigned int len,
- unsigned int olx __rte_unused)
-{
- unsigned int part;
- uint8_t *pdst;
-
- dseg->bcount = rte_cpu_to_be_32(len | MLX5_ETH_WQE_DATA_INLINE);
- pdst = &dseg->inline_data[0];
- /*
- * The WQEBB space availability is checked by caller.
- * Here we should be aware of WQE ring buffer wraparound only.
- */
- part = (uint8_t *)txq->wqes_end - pdst;
- part = RTE_MIN(part, len);
- do {
- rte_memcpy(pdst, buf, part);
- len -= part;
- if (likely(!len)) {
- pdst += part;
- pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
- /* Note: no final wraparound check here. */
- return (struct mlx5_wqe_dseg *)pdst;
- }
- pdst = (uint8_t *)txq->wqes;
- buf += part;
- part = len;
- } while (true);
-}
-
-/**
- * Build the Data Segment of inlined data from single
- * segment packet with VLAN insertion.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param dseg
- * Pointer to the dseg fill with built Data Segment.
- * @param buf
- * Data buffer to point.
- * @param len
- * Data buffer length.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * Pointer to the next Data Segment after inlined data.
- * Ring buffer wraparound check is needed.
- */
-static __rte_always_inline struct mlx5_wqe_dseg *
-mlx5_tx_dseg_vlan(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc __rte_unused,
- struct mlx5_wqe_dseg *restrict dseg,
- uint8_t *buf,
- unsigned int len,
- unsigned int olx __rte_unused)
-
-{
- unsigned int part;
- uint8_t *pdst;
-
- assert(len > MLX5_ESEG_MIN_INLINE_SIZE);
- static_assert(MLX5_DSEG_MIN_INLINE_SIZE ==
- (2 * RTE_ETHER_ADDR_LEN),
- "invalid Data Segment data size");
- dseg->bcount = rte_cpu_to_be_32((len + sizeof(struct rte_vlan_hdr)) |
- MLX5_ETH_WQE_DATA_INLINE);
- pdst = &dseg->inline_data[0];
- memcpy(pdst, buf, MLX5_DSEG_MIN_INLINE_SIZE);
- buf += MLX5_DSEG_MIN_INLINE_SIZE;
- pdst += MLX5_DSEG_MIN_INLINE_SIZE;
- len -= MLX5_DSEG_MIN_INLINE_SIZE;
- /* Insert VLAN ethertype + VLAN tag. Pointer is aligned. */
- assert(pdst == RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE));
- if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
- pdst = (uint8_t *)txq->wqes;
- *(uint32_t *)pdst = rte_cpu_to_be_32((RTE_ETHER_TYPE_VLAN << 16) |
- loc->mbuf->vlan_tci);
- pdst += sizeof(struct rte_vlan_hdr);
- /*
- * The WQEBB space availability is checked by caller.
- * Here we should be aware of WQE ring buffer wraparound only.
- */
- part = (uint8_t *)txq->wqes_end - pdst;
- part = RTE_MIN(part, len);
- do {
- rte_memcpy(pdst, buf, part);
- len -= part;
- if (likely(!len)) {
- pdst += part;
- pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
- /* Note: no final wraparound check here. */
- return (struct mlx5_wqe_dseg *)pdst;
- }
- pdst = (uint8_t *)txq->wqes;
- buf += part;
- part = len;
- } while (true);
-}
-
-/**
- * Build the Ethernet Segment with optionally inlined data with
- * VLAN insertion and following Data Segments (if any) from
- * multi-segment packet. Used by ordinary send and TSO.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param wqe
- * Pointer to WQE to fill with built Ethernet/Data Segments.
- * @param vlan
- * Length of VLAN header to insert, 0 means no VLAN insertion.
- * @param inlen
- * Data length to inline. For TSO this parameter specifies
- * exact value, for ordinary send routine can be aligned by
- * caller to provide better WQE space saving and data buffer
- * start address alignment. This length includes VLAN header
- * being inserted.
- * @param tso
- * Zero means ordinary send, inlined data can be extended,
- * otherwise this is TSO, inlined data length is fixed.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * Actual size of built WQE in segments.
- */
-static __rte_always_inline unsigned int
-mlx5_tx_mseg_build(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- struct mlx5_wqe *restrict wqe,
- unsigned int vlan,
- unsigned int inlen,
- unsigned int tso,
- unsigned int olx __rte_unused)
-{
- struct mlx5_wqe_dseg *restrict dseg;
- unsigned int ds;
-
- assert((rte_pktmbuf_pkt_len(loc->mbuf) + vlan) >= inlen);
- loc->mbuf_nseg = NB_SEGS(loc->mbuf);
- loc->mbuf_off = 0;
-
- dseg = mlx5_tx_eseg_mdat(txq, loc, wqe, vlan, inlen, tso, olx);
- if (!loc->mbuf_nseg)
- goto dseg_done;
- /*
- * There are still some mbuf remaining, not inlined.
- * The first mbuf may be partially inlined and we
- * must process the possible non-zero data offset.
- */
- if (loc->mbuf_off) {
- unsigned int dlen;
- uint8_t *dptr;
-
- /*
- * Exhausted packets must be dropped before.
- * Non-zero offset means there are some data
- * remained in the packet.
- */
- assert(loc->mbuf_off < rte_pktmbuf_data_len(loc->mbuf));
- assert(rte_pktmbuf_data_len(loc->mbuf));
- dptr = rte_pktmbuf_mtod_offset(loc->mbuf, uint8_t *,
- loc->mbuf_off);
- dlen = rte_pktmbuf_data_len(loc->mbuf) - loc->mbuf_off;
- /*
- * Build the pointer/minimal data Data Segment.
- * Do ring buffer wrapping check in advance.
- */
- if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
- dseg = (struct mlx5_wqe_dseg *)txq->wqes;
- mlx5_tx_dseg_iptr(txq, loc, dseg, dptr, dlen, olx);
- /* Store the mbuf to be freed on completion. */
- assert(loc->elts_free);
- txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
- --loc->elts_free;
- ++dseg;
- if (--loc->mbuf_nseg == 0)
- goto dseg_done;
- loc->mbuf = loc->mbuf->next;
- loc->mbuf_off = 0;
- }
- do {
- if (unlikely(!rte_pktmbuf_data_len(loc->mbuf))) {
- struct rte_mbuf *mbuf;
-
- /* Zero length segment found, just skip. */
- mbuf = loc->mbuf;
- loc->mbuf = loc->mbuf->next;
- rte_pktmbuf_free_seg(mbuf);
- if (--loc->mbuf_nseg == 0)
- break;
- } else {
- if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
- dseg = (struct mlx5_wqe_dseg *)txq->wqes;
- mlx5_tx_dseg_iptr
- (txq, loc, dseg,
- rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
- rte_pktmbuf_data_len(loc->mbuf), olx);
- assert(loc->elts_free);
- txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
- --loc->elts_free;
- ++dseg;
- if (--loc->mbuf_nseg == 0)
- break;
- loc->mbuf = loc->mbuf->next;
- }
- } while (true);
-
-dseg_done:
- /* Calculate actual segments used from the dseg pointer. */
- if ((uintptr_t)wqe < (uintptr_t)dseg)
- ds = ((uintptr_t)dseg - (uintptr_t)wqe) / MLX5_WSEG_SIZE;
- else
- ds = (((uintptr_t)dseg - (uintptr_t)wqe) +
- txq->wqe_s * MLX5_WQE_SIZE) / MLX5_WSEG_SIZE;
- return ds;
-}
-
-/**
- * Tx one packet function for multi-segment TSO. Supports all
- * types of Tx offloads, uses MLX5_OPCODE_TSO to build WQEs,
- * sends one packet per WQE.
- *
- * This routine is responsible for storing processed mbuf
- * into elts ring buffer and update elts_head.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
- * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
- * Local context variables partially updated.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_packet_multi_tso(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- unsigned int olx)
-{
- struct mlx5_wqe *restrict wqe;
- unsigned int ds, dlen, inlen, ntcp, vlan = 0;
-
- /*
- * Calculate data length to be inlined to estimate
- * the required space in WQE ring buffer.
- */
- dlen = rte_pktmbuf_pkt_len(loc->mbuf);
- if (MLX5_TXOFF_CONFIG(VLAN) && loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
- vlan = sizeof(struct rte_vlan_hdr);
- inlen = loc->mbuf->l2_len + vlan +
- loc->mbuf->l3_len + loc->mbuf->l4_len;
- if (unlikely((!inlen || !loc->mbuf->tso_segsz)))
- return MLX5_TXCMP_CODE_ERROR;
- if (loc->mbuf->ol_flags & PKT_TX_TUNNEL_MASK)
- inlen += loc->mbuf->outer_l2_len + loc->mbuf->outer_l3_len;
- /* Packet must contain all TSO headers. */
- if (unlikely(inlen > MLX5_MAX_TSO_HEADER ||
- inlen <= MLX5_ESEG_MIN_INLINE_SIZE ||
- inlen > (dlen + vlan)))
- return MLX5_TXCMP_CODE_ERROR;
- assert(inlen >= txq->inlen_mode);
- /*
- * Check whether there are enough free WQEBBs:
- * - Control Segment
- * - Ethernet Segment
- * - First Segment of inlined Ethernet data
- * - ... data continued ...
- * - Data Segments of pointer/min inline type
- */
- ds = NB_SEGS(loc->mbuf) + 2 + (inlen -
- MLX5_ESEG_MIN_INLINE_SIZE +
- MLX5_WSEG_SIZE +
- MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
- if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
- return MLX5_TXCMP_CODE_EXIT;
- /* Check for maximal WQE size. */
- if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) / 4)))
- return MLX5_TXCMP_CODE_ERROR;
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes/packets counters. */
- ntcp = (dlen - (inlen - vlan) + loc->mbuf->tso_segsz - 1) /
- loc->mbuf->tso_segsz;
- /*
- * One will be added for mbuf itself
- * at the end of the mlx5_tx_burst from
- * loc->pkts_sent field.
- */
- --ntcp;
- txq->stats.opackets += ntcp;
- txq->stats.obytes += dlen + vlan + ntcp * inlen;
-#endif
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- loc->wqe_last = wqe;
- mlx5_tx_cseg_init(txq, loc, wqe, 0, MLX5_OPCODE_TSO, olx);
- ds = mlx5_tx_mseg_build(txq, loc, wqe, vlan, inlen, 1, olx);
- wqe->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
- txq->wqe_ci += (ds + 3) / 4;
- loc->wqe_free -= (ds + 3) / 4;
- /* Request CQE generation if limits are reached. */
- mlx5_tx_request_completion(txq, loc, true, olx);
- return MLX5_TXCMP_CODE_MULTI;
-}
-
-/**
- * Tx one packet function for multi-segment SEND. Supports all
- * types of Tx offloads, uses MLX5_OPCODE_SEND to build WQEs,
- * sends one packet per WQE, without any data inlining in
- * Ethernet Segment.
- *
- * This routine is responsible for storing processed mbuf
- * into elts ring buffer and update elts_head.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
- * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
- * Local context variables partially updated.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_packet_multi_send(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- unsigned int olx)
-{
- struct mlx5_wqe_dseg *restrict dseg;
- struct mlx5_wqe *restrict wqe;
- unsigned int ds, nseg;
-
- assert(NB_SEGS(loc->mbuf) > 1);
- /*
- * No inline at all, it means the CPU cycles saving
- * is prioritized at configuration, we should not
- * copy any packet data to WQE.
- */
- nseg = NB_SEGS(loc->mbuf);
- ds = 2 + nseg;
- if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
- return MLX5_TXCMP_CODE_EXIT;
- /* Check for maximal WQE size. */
- if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) / 4)))
- return MLX5_TXCMP_CODE_ERROR;
- /*
- * Some Tx offloads may cause an error if
- * packet is not long enough, check against
- * assumed minimal length.
- */
- if (rte_pktmbuf_pkt_len(loc->mbuf) <= MLX5_ESEG_MIN_INLINE_SIZE)
- return MLX5_TXCMP_CODE_ERROR;
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- txq->stats.obytes += rte_pktmbuf_pkt_len(loc->mbuf);
- if (MLX5_TXOFF_CONFIG(VLAN) &&
- loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
- txq->stats.obytes += sizeof(struct rte_vlan_hdr);
-#endif
- /*
- * SEND WQE, one WQEBB:
- * - Control Segment, SEND opcode
- * - Ethernet Segment, optional VLAN, no inline
- * - Data Segments, pointer only type
- */
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- loc->wqe_last = wqe;
- mlx5_tx_cseg_init(txq, loc, wqe, ds, MLX5_OPCODE_SEND, olx);
- mlx5_tx_eseg_none(txq, loc, wqe, olx);
- dseg = &wqe->dseg[0];
- do {
- if (unlikely(!rte_pktmbuf_data_len(loc->mbuf))) {
- struct rte_mbuf *mbuf;
-
- /*
- * Zero length segment found, have to
- * correct total size of WQE in segments.
- * It is supposed to be rare occasion, so
- * in normal case (no zero length segments)
- * we avoid extra writing to the Control
- * Segment.
- */
- --ds;
- wqe->cseg.sq_ds -= RTE_BE32(1);
- mbuf = loc->mbuf;
- loc->mbuf = mbuf->next;
- rte_pktmbuf_free_seg(mbuf);
- if (--nseg == 0)
- break;
- } else {
- mlx5_tx_dseg_ptr
- (txq, loc, dseg,
- rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
- rte_pktmbuf_data_len(loc->mbuf), olx);
- txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
- --loc->elts_free;
- if (--nseg == 0)
- break;
- ++dseg;
- if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
- dseg = (struct mlx5_wqe_dseg *)txq->wqes;
- loc->mbuf = loc->mbuf->next;
- }
- } while (true);
- txq->wqe_ci += (ds + 3) / 4;
- loc->wqe_free -= (ds + 3) / 4;
- /* Request CQE generation if limits are reached. */
- mlx5_tx_request_completion(txq, loc, true, olx);
- return MLX5_TXCMP_CODE_MULTI;
-}
-
-/**
- * Tx one packet function for multi-segment SEND. Supports all
- * types of Tx offloads, uses MLX5_OPCODE_SEND to build WQEs,
- * sends one packet per WQE, with data inlining in
- * Ethernet Segment and minimal Data Segments.
- *
- * This routine is responsible for storing processed mbuf
- * into elts ring buffer and update elts_head.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
- * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
- * Local context variables partially updated.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_packet_multi_inline(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- unsigned int olx)
-{
- struct mlx5_wqe *restrict wqe;
- unsigned int ds, inlen, dlen, vlan = 0;
-
- assert(MLX5_TXOFF_CONFIG(INLINE));
- assert(NB_SEGS(loc->mbuf) > 1);
- /*
- * First calculate data length to be inlined
- * to estimate the required space for WQE.
- */
- dlen = rte_pktmbuf_pkt_len(loc->mbuf);
- if (MLX5_TXOFF_CONFIG(VLAN) && loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
- vlan = sizeof(struct rte_vlan_hdr);
- inlen = dlen + vlan;
- /* Check against minimal length. */
- if (inlen <= MLX5_ESEG_MIN_INLINE_SIZE)
- return MLX5_TXCMP_CODE_ERROR;
- assert(txq->inlen_send >= MLX5_ESEG_MIN_INLINE_SIZE);
- if (inlen > txq->inlen_send) {
- struct rte_mbuf *mbuf;
- unsigned int nxlen;
- uintptr_t start;
-
- /*
- * Packet length exceeds the allowed inline
- * data length, check whether the minimal
- * inlining is required.
- */
- if (txq->inlen_mode) {
- assert(txq->inlen_mode >= MLX5_ESEG_MIN_INLINE_SIZE);
- assert(txq->inlen_mode <= txq->inlen_send);
- inlen = txq->inlen_mode;
- } else {
- if (!vlan || txq->vlan_en) {
- /*
- * VLAN insertion will be done inside by HW.
- * It is not utmost effective - VLAN flag is
- * checked twice, but we should proceed the
- * inlining length correctly and take into
- * account the VLAN header being inserted.
- */
- return mlx5_tx_packet_multi_send
- (txq, loc, olx);
- }
- inlen = MLX5_ESEG_MIN_INLINE_SIZE;
- }
- /*
- * Now we know the minimal amount of data is requested
- * to inline. Check whether we should inline the buffers
- * from the chain beginning to eliminate some mbufs.
- */
- mbuf = loc->mbuf;
- nxlen = rte_pktmbuf_data_len(mbuf);
- if (unlikely(nxlen <= txq->inlen_send)) {
- /* We can inline first mbuf at least. */
- if (nxlen < inlen) {
- unsigned int smlen;
-
- /* Scan mbufs till inlen filled. */
- do {
- smlen = nxlen;
- mbuf = NEXT(mbuf);
- assert(mbuf);
- nxlen = rte_pktmbuf_data_len(mbuf);
- nxlen += smlen;
- } while (unlikely(nxlen < inlen));
- if (unlikely(nxlen > txq->inlen_send)) {
- /* We cannot inline entire mbuf. */
- smlen = inlen - smlen;
- start = rte_pktmbuf_mtod_offset
- (mbuf, uintptr_t, smlen);
- goto do_align;
- }
- }
- do {
- inlen = nxlen;
- mbuf = NEXT(mbuf);
- /* There should be not end of packet. */
- assert(mbuf);
- nxlen = inlen + rte_pktmbuf_data_len(mbuf);
- } while (unlikely(nxlen < txq->inlen_send));
- }
- start = rte_pktmbuf_mtod(mbuf, uintptr_t);
- /*
- * Check whether we can do inline to align start
- * address of data buffer to cacheline.
- */
-do_align:
- start = (~start + 1) & (RTE_CACHE_LINE_SIZE - 1);
- if (unlikely(start)) {
- start += inlen;
- if (start <= txq->inlen_send)
- inlen = start;
- }
- }
- /*
- * Check whether there are enough free WQEBBs:
- * - Control Segment
- * - Ethernet Segment
- * - First Segment of inlined Ethernet data
- * - ... data continued ...
- * - Data Segments of pointer/min inline type
- *
- * Estimate the number of Data Segments conservatively,
- * supposing no any mbufs is being freed during inlining.
- */
- assert(inlen <= txq->inlen_send);
- ds = NB_SEGS(loc->mbuf) + 2 + (inlen -
- MLX5_ESEG_MIN_INLINE_SIZE +
- MLX5_WSEG_SIZE +
- MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
- if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
- return MLX5_TXCMP_CODE_EXIT;
- /* Check for maximal WQE size. */
- if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) / 4)))
- return MLX5_TXCMP_CODE_ERROR;
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes/packets counters. */
- txq->stats.obytes += dlen + vlan;
-#endif
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- loc->wqe_last = wqe;
- mlx5_tx_cseg_init(txq, loc, wqe, 0, MLX5_OPCODE_SEND, olx);
- ds = mlx5_tx_mseg_build(txq, loc, wqe, vlan, inlen, 0, olx);
- wqe->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
- txq->wqe_ci += (ds + 3) / 4;
- loc->wqe_free -= (ds + 3) / 4;
- /* Request CQE generation if limits are reached. */
- mlx5_tx_request_completion(txq, loc, true, olx);
- return MLX5_TXCMP_CODE_MULTI;
-}
-
-/**
- * Tx burst function for multi-segment packets. Supports all
- * types of Tx offloads, uses MLX5_OPCODE_SEND/TSO to build WQEs,
- * sends one packet per WQE. Function stops sending if it
- * encounters the single-segment packet.
- *
- * This routine is responsible for storing processed mbuf
- * into elts ring buffer and update elts_head.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param[in] pkts
- * Packets to transmit.
- * @param pkts_n
- * Number of packets in array.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
- * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
- * MLX5_TXCMP_CODE_SINGLE - single-segment packet encountered.
- * MLX5_TXCMP_CODE_TSO - TSO single-segment packet encountered.
- * Local context variables updated.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_mseg(struct mlx5_txq_data *restrict txq,
- struct rte_mbuf **restrict pkts,
- unsigned int pkts_n,
- struct mlx5_txq_local *restrict loc,
- unsigned int olx)
-{
- assert(loc->elts_free && loc->wqe_free);
- assert(pkts_n > loc->pkts_sent);
- pkts += loc->pkts_sent + 1;
- pkts_n -= loc->pkts_sent;
- for (;;) {
- enum mlx5_txcmp_code ret;
-
- assert(NB_SEGS(loc->mbuf) > 1);
- /*
- * Estimate the number of free elts quickly but
- * conservatively. Some segment may be fully inlined
- * and freed, ignore this here - precise estimation
- * is costly.
- */
- if (loc->elts_free < NB_SEGS(loc->mbuf))
- return MLX5_TXCMP_CODE_EXIT;
- if (MLX5_TXOFF_CONFIG(TSO) &&
- unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG)) {
- /* Proceed with multi-segment TSO. */
- ret = mlx5_tx_packet_multi_tso(txq, loc, olx);
- } else if (MLX5_TXOFF_CONFIG(INLINE)) {
- /* Proceed with multi-segment SEND with inlining. */
- ret = mlx5_tx_packet_multi_inline(txq, loc, olx);
- } else {
- /* Proceed with multi-segment SEND w/o inlining. */
- ret = mlx5_tx_packet_multi_send(txq, loc, olx);
- }
- if (ret == MLX5_TXCMP_CODE_EXIT)
- return MLX5_TXCMP_CODE_EXIT;
- if (ret == MLX5_TXCMP_CODE_ERROR)
- return MLX5_TXCMP_CODE_ERROR;
- /* WQE is built, go to the next packet. */
- ++loc->pkts_sent;
- --pkts_n;
- if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- loc->mbuf = *pkts++;
- if (pkts_n > 1)
- rte_prefetch0(*pkts);
- if (likely(NB_SEGS(loc->mbuf) > 1))
- continue;
- /* Here ends the series of multi-segment packets. */
- if (MLX5_TXOFF_CONFIG(TSO) &&
- unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG))
- return MLX5_TXCMP_CODE_TSO;
- return MLX5_TXCMP_CODE_SINGLE;
- }
- assert(false);
-}
-
-/**
- * Tx burst function for single-segment packets with TSO.
- * Supports all types of Tx offloads, except multi-packets.
- * Uses MLX5_OPCODE_TSO to build WQEs, sends one packet per WQE.
- * Function stops sending if it encounters the multi-segment
- * packet or packet without TSO requested.
- *
- * The routine is responsible for storing processed mbuf
- * into elts ring buffer and update elts_head if inline
- * offloads is requested due to possible early freeing
- * of the inlined mbufs (can not store pkts array in elts
- * as a batch).
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param[in] pkts
- * Packets to transmit.
- * @param pkts_n
- * Number of packets in array.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
- * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
- * MLX5_TXCMP_CODE_SINGLE - single-segment packet encountered.
- * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
- * Local context variables updated.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_tso(struct mlx5_txq_data *restrict txq,
- struct rte_mbuf **restrict pkts,
- unsigned int pkts_n,
- struct mlx5_txq_local *restrict loc,
- unsigned int olx)
-{
- assert(loc->elts_free && loc->wqe_free);
- assert(pkts_n > loc->pkts_sent);
- pkts += loc->pkts_sent + 1;
- pkts_n -= loc->pkts_sent;
- for (;;) {
- struct mlx5_wqe_dseg *restrict dseg;
- struct mlx5_wqe *restrict wqe;
- unsigned int ds, dlen, hlen, ntcp, vlan = 0;
- uint8_t *dptr;
-
- assert(NB_SEGS(loc->mbuf) == 1);
- dlen = rte_pktmbuf_data_len(loc->mbuf);
- if (MLX5_TXOFF_CONFIG(VLAN) &&
- loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
- vlan = sizeof(struct rte_vlan_hdr);
- }
- /*
- * First calculate the WQE size to check
- * whether we have enough space in ring buffer.
- */
- hlen = loc->mbuf->l2_len + vlan +
- loc->mbuf->l3_len + loc->mbuf->l4_len;
- if (unlikely((!hlen || !loc->mbuf->tso_segsz)))
- return MLX5_TXCMP_CODE_ERROR;
- if (loc->mbuf->ol_flags & PKT_TX_TUNNEL_MASK)
- hlen += loc->mbuf->outer_l2_len +
- loc->mbuf->outer_l3_len;
- /* Segment must contain all TSO headers. */
- if (unlikely(hlen > MLX5_MAX_TSO_HEADER ||
- hlen <= MLX5_ESEG_MIN_INLINE_SIZE ||
- hlen > (dlen + vlan)))
- return MLX5_TXCMP_CODE_ERROR;
- /*
- * Check whether there are enough free WQEBBs:
- * - Control Segment
- * - Ethernet Segment
- * - First Segment of inlined Ethernet data
- * - ... data continued ...
- * - Finishing Data Segment of pointer type
- */
- ds = 4 + (hlen - MLX5_ESEG_MIN_INLINE_SIZE +
- MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
- if (loc->wqe_free < ((ds + 3) / 4))
- return MLX5_TXCMP_CODE_EXIT;
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes/packets counters. */
- ntcp = (dlen + vlan - hlen +
- loc->mbuf->tso_segsz - 1) /
- loc->mbuf->tso_segsz;
- /*
- * One will be added for mbuf itself at the end
- * of the mlx5_tx_burst from loc->pkts_sent field.
- */
- --ntcp;
- txq->stats.opackets += ntcp;
- txq->stats.obytes += dlen + vlan + ntcp * hlen;
-#endif
- /*
- * Build the TSO WQE:
- * - Control Segment
- * - Ethernet Segment with hlen bytes inlined
- * - Data Segment of pointer type
- */
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- loc->wqe_last = wqe;
- mlx5_tx_cseg_init(txq, loc, wqe, ds,
- MLX5_OPCODE_TSO, olx);
- dseg = mlx5_tx_eseg_data(txq, loc, wqe, vlan, hlen, 1, olx);
- dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) + hlen - vlan;
- dlen -= hlen - vlan;
- mlx5_tx_dseg_ptr(txq, loc, dseg, dptr, dlen, olx);
- /*
- * WQE is built, update the loop parameters
- * and go to the next packet.
- */
- txq->wqe_ci += (ds + 3) / 4;
- loc->wqe_free -= (ds + 3) / 4;
- if (MLX5_TXOFF_CONFIG(INLINE))
- txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
- --loc->elts_free;
- ++loc->pkts_sent;
- --pkts_n;
- /* Request CQE generation if limits are reached. */
- mlx5_tx_request_completion(txq, loc, false, olx);
- if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- loc->mbuf = *pkts++;
- if (pkts_n > 1)
- rte_prefetch0(*pkts);
- if (MLX5_TXOFF_CONFIG(MULTI) &&
- unlikely(NB_SEGS(loc->mbuf) > 1))
- return MLX5_TXCMP_CODE_MULTI;
- if (likely(!(loc->mbuf->ol_flags & PKT_TX_TCP_SEG)))
- return MLX5_TXCMP_CODE_SINGLE;
- /* Continue with the next TSO packet. */
- }
- assert(false);
-}
-
-/**
- * Analyze the packet and select the best method to send.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- * @param newp
- * The predefined flag whether do complete check for
- * multi-segment packets and TSO.
- *
- * @return
- * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
- * MLX5_TXCMP_CODE_TSO - TSO required, use TSO/LSO.
- * MLX5_TXCMP_CODE_SINGLE - single-segment packet, use SEND.
- * MLX5_TXCMP_CODE_EMPW - single-segment packet, use MPW.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_able_to_empw(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- unsigned int olx,
- bool newp)
-{
- /* Check for multi-segment packet. */
- if (newp &&
- MLX5_TXOFF_CONFIG(MULTI) &&
- unlikely(NB_SEGS(loc->mbuf) > 1))
- return MLX5_TXCMP_CODE_MULTI;
- /* Check for TSO packet. */
- if (newp &&
- MLX5_TXOFF_CONFIG(TSO) &&
- unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG))
- return MLX5_TXCMP_CODE_TSO;
- /* Check if eMPW is enabled at all. */
- if (!MLX5_TXOFF_CONFIG(EMPW))
- return MLX5_TXCMP_CODE_SINGLE;
- /* Check if eMPW can be engaged. */
- if (MLX5_TXOFF_CONFIG(VLAN) &&
- unlikely(loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) &&
- (!MLX5_TXOFF_CONFIG(INLINE) ||
- unlikely((rte_pktmbuf_data_len(loc->mbuf) +
- sizeof(struct rte_vlan_hdr)) > txq->inlen_empw))) {
- /*
- * eMPW does not support VLAN insertion offload,
- * we have to inline the entire packet but
- * packet is too long for inlining.
- */
- return MLX5_TXCMP_CODE_SINGLE;
- }
- return MLX5_TXCMP_CODE_EMPW;
-}
-
-/**
- * Check the next packet attributes to match with the eMPW batch ones.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param es
- * Pointer to Ethernet Segment of eMPW batch.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * true - packet match with eMPW batch attributes.
- * false - no match, eMPW should be restarted.
- */
-static __rte_always_inline bool
-mlx5_tx_match_empw(struct mlx5_txq_data *restrict txq __rte_unused,
- struct mlx5_wqe_eseg *restrict es,
- struct mlx5_txq_local *restrict loc,
- unsigned int olx)
-{
- uint8_t swp_flags = 0;
-
- /* Compare the checksum flags, if any. */
- if (MLX5_TXOFF_CONFIG(CSUM) &&
- txq_ol_cksum_to_cs(loc->mbuf) != es->cs_flags)
- return false;
- /* Compare the Software Parser offsets and flags. */
- if (MLX5_TXOFF_CONFIG(SWP) &&
- (es->swp_offs != txq_mbuf_to_swp(loc, &swp_flags, olx) ||
- es->swp_flags != swp_flags))
- return false;
- /* Fill metadata field if needed. */
- if (MLX5_TXOFF_CONFIG(METADATA) &&
- es->metadata != (loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
- *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0))
- return false;
- /* There must be no VLAN packets in eMPW loop. */
- if (MLX5_TXOFF_CONFIG(VLAN))
- assert(!(loc->mbuf->ol_flags & PKT_TX_VLAN_PKT));
- return true;
-}
-
-/*
- * Update send loop variables and WQE for eMPW loop
- * without data inlining. Number of Data Segments is
- * equal to the number of sent packets.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param ds
- * Number of packets/Data Segments/Packets.
- * @param slen
- * Accumulated statistics, bytes sent
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * true - packet match with eMPW batch attributes.
- * false - no match, eMPW should be restarted.
- */
-static __rte_always_inline void
-mlx5_tx_sdone_empw(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- unsigned int ds,
- unsigned int slen,
- unsigned int olx)
-{
- assert(!MLX5_TXOFF_CONFIG(INLINE));
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- txq->stats.obytes += slen;
-#else
- (void)slen;
-#endif
- loc->elts_free -= ds;
- loc->pkts_sent += ds;
- ds += 2;
- loc->wqe_last->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
- txq->wqe_ci += (ds + 3) / 4;
- loc->wqe_free -= (ds + 3) / 4;
- /* Request CQE generation if limits are reached. */
- mlx5_tx_request_completion(txq, loc, false, olx);
-}
-
-/*
- * Update send loop variables and WQE for eMPW loop
- * with data inlining. Gets the size of pushed descriptors
- * and data to the WQE.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param loc
- * Pointer to burst routine local context.
- * @param len
- * Total size of descriptor/data in bytes.
- * @param slen
- * Accumulated statistics, data bytes sent.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * true - packet match with eMPW batch attributes.
- * false - no match, eMPW should be restarted.
- */
-static __rte_always_inline void
-mlx5_tx_idone_empw(struct mlx5_txq_data *restrict txq,
- struct mlx5_txq_local *restrict loc,
- unsigned int len,
- unsigned int slen,
- unsigned int olx __rte_unused)
-{
- assert(MLX5_TXOFF_CONFIG(INLINE));
- assert((len % MLX5_WSEG_SIZE) == 0);
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- txq->stats.obytes += slen;
-#else
- (void)slen;
-#endif
- len = len / MLX5_WSEG_SIZE + 2;
- loc->wqe_last->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | len);
- txq->wqe_ci += (len + 3) / 4;
- loc->wqe_free -= (len + 3) / 4;
- /* Request CQE generation if limits are reached. */
- mlx5_tx_request_completion(txq, loc, false, olx);
-}
-
-/**
- * The set of Tx burst functions for single-segment packets
- * without TSO and with Multi-Packet Writing feature support.
- * Supports all types of Tx offloads, except multi-packets
- * and TSO.
- *
- * Uses MLX5_OPCODE_EMPW to build WQEs if possible and sends
- * as many packet per WQE as it can. If eMPW is not configured
- * or packet can not be sent with eMPW (VLAN insertion) the
- * ordinary SEND opcode is used and only one packet placed
- * in WQE.
- *
- * Functions stop sending if it encounters the multi-segment
- * packet or packet with TSO requested.
- *
- * The routines are responsible for storing processed mbuf
- * into elts ring buffer and update elts_head if inlining
- * offload is requested. Otherwise the copying mbufs to elts
- * can be postponed and completed at the end of burst routine.
- *
- * @param txq
- * Pointer to TX queue structure.
- * @param[in] pkts
- * Packets to transmit.
- * @param pkts_n
- * Number of packets in array.
- * @param loc
- * Pointer to burst routine local context.
- * @param olx
- * Configured Tx offloads mask. It is fully defined at
- * compile time and may be used for optimization.
- *
- * @return
- * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
- * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
- * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
- * MLX5_TXCMP_CODE_TSO - TSO packet encountered.
- * MLX5_TXCMP_CODE_SINGLE - used inside functions set.
- * MLX5_TXCMP_CODE_EMPW - used inside functions set.
- *
- * Local context variables updated.
- *
- *
- * The routine sends packets with MLX5_OPCODE_EMPW
- * without inlining, this is dedicated optimized branch.
- * No VLAN insertion is supported.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_empw_simple(struct mlx5_txq_data *restrict txq,
- struct rte_mbuf **restrict pkts,
- unsigned int pkts_n,
- struct mlx5_txq_local *restrict loc,
- unsigned int olx)
-{
- /*
- * Subroutine is the part of mlx5_tx_burst_single()
- * and sends single-segment packet with eMPW opcode
- * without data inlining.
- */
- assert(!MLX5_TXOFF_CONFIG(INLINE));
- assert(MLX5_TXOFF_CONFIG(EMPW));
- assert(loc->elts_free && loc->wqe_free);
- assert(pkts_n > loc->pkts_sent);
- static_assert(MLX5_EMPW_MIN_PACKETS >= 2, "invalid min size");
- pkts += loc->pkts_sent + 1;
- pkts_n -= loc->pkts_sent;
- for (;;) {
- struct mlx5_wqe_dseg *restrict dseg;
- struct mlx5_wqe_eseg *restrict eseg;
- enum mlx5_txcmp_code ret;
- unsigned int part, loop;
- unsigned int slen = 0;
-
-next_empw:
- part = RTE_MIN(pkts_n, MLX5_EMPW_MAX_PACKETS);
- if (unlikely(loc->elts_free < part)) {
- /* We have no enough elts to save all mbufs. */
- if (unlikely(loc->elts_free < MLX5_EMPW_MIN_PACKETS))
- return MLX5_TXCMP_CODE_EXIT;
- /* But we still able to send at least minimal eMPW. */
- part = loc->elts_free;
- }
- /* Check whether we have enough WQEs */
- if (unlikely(loc->wqe_free < ((2 + part + 3) / 4))) {
- if (unlikely(loc->wqe_free <
- ((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
- return MLX5_TXCMP_CODE_EXIT;
- part = (loc->wqe_free * 4) - 2;
- }
- if (likely(part > 1))
- rte_prefetch0(*pkts);
- loc->wqe_last = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- /*
- * Build eMPW title WQEBB:
- * - Control Segment, eMPW opcode
- * - Ethernet Segment, no inline
- */
- mlx5_tx_cseg_init(txq, loc, loc->wqe_last, part + 2,
- MLX5_OPCODE_ENHANCED_MPSW, olx);
- mlx5_tx_eseg_none(txq, loc, loc->wqe_last,
- olx & ~MLX5_TXOFF_CONFIG_VLAN);
- eseg = &loc->wqe_last->eseg;
- dseg = &loc->wqe_last->dseg[0];
- loop = part;
- for (;;) {
- uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- slen += dlen;
-#endif
- mlx5_tx_dseg_ptr
- (txq, loc, dseg,
- rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
- dlen, olx);
- if (unlikely(--loop == 0))
- break;
- loc->mbuf = *pkts++;
- if (likely(loop > 1))
- rte_prefetch0(*pkts);
- ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
- /*
- * Unroll the completion code to avoid
- * returning variable value - it results in
- * unoptimized sequent checking in caller.
- */
- if (ret == MLX5_TXCMP_CODE_MULTI) {
- part -= loop;
- mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
- if (unlikely(!loc->elts_free ||
- !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- return MLX5_TXCMP_CODE_MULTI;
- }
- if (ret == MLX5_TXCMP_CODE_TSO) {
- part -= loop;
- mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
- if (unlikely(!loc->elts_free ||
- !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- return MLX5_TXCMP_CODE_TSO;
- }
- if (ret == MLX5_TXCMP_CODE_SINGLE) {
- part -= loop;
- mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
- if (unlikely(!loc->elts_free ||
- !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- return MLX5_TXCMP_CODE_SINGLE;
- }
- if (ret != MLX5_TXCMP_CODE_EMPW) {
- assert(false);
- part -= loop;
- mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
- return MLX5_TXCMP_CODE_ERROR;
- }
- /*
- * Check whether packet parameters coincide
- * within assumed eMPW batch:
- * - check sum settings
- * - metadata value
- * - software parser settings
- */
- if (!mlx5_tx_match_empw(txq, eseg, loc, olx)) {
- assert(loop);
- part -= loop;
- mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
- if (unlikely(!loc->elts_free ||
- !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- pkts_n -= part;
- goto next_empw;
- }
- /* Packet attributes match, continue the same eMPW. */
- ++dseg;
- if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
- dseg = (struct mlx5_wqe_dseg *)txq->wqes;
- }
- /* eMPW is built successfully, update loop parameters. */
- assert(!loop);
- assert(pkts_n >= part);
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- txq->stats.obytes += slen;
-#endif
- loc->elts_free -= part;
- loc->pkts_sent += part;
- txq->wqe_ci += (2 + part + 3) / 4;
- loc->wqe_free -= (2 + part + 3) / 4;
- pkts_n -= part;
- /* Request CQE generation if limits are reached. */
- mlx5_tx_request_completion(txq, loc, false, olx);
- if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- loc->mbuf = *pkts++;
- ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
- if (unlikely(ret != MLX5_TXCMP_CODE_EMPW))
- return ret;
- /* Continue sending eMPW batches. */
- }
- assert(false);
-}
-
-/**
- * The routine sends packets with MLX5_OPCODE_EMPW
- * with inlining, optionally supports VLAN insertion.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_empw_inline(struct mlx5_txq_data *restrict txq,
- struct rte_mbuf **restrict pkts,
- unsigned int pkts_n,
- struct mlx5_txq_local *restrict loc,
- unsigned int olx)
-{
- /*
- * Subroutine is the part of mlx5_tx_burst_single()
- * and sends single-segment packet with eMPW opcode
- * with data inlining.
- */
- assert(MLX5_TXOFF_CONFIG(INLINE));
- assert(MLX5_TXOFF_CONFIG(EMPW));
- assert(loc->elts_free && loc->wqe_free);
- assert(pkts_n > loc->pkts_sent);
- static_assert(MLX5_EMPW_MIN_PACKETS >= 2, "invalid min size");
- pkts += loc->pkts_sent + 1;
- pkts_n -= loc->pkts_sent;
- for (;;) {
- struct mlx5_wqe_dseg *restrict dseg;
- struct mlx5_wqe_eseg *restrict eseg;
- enum mlx5_txcmp_code ret;
- unsigned int room, part, nlim;
- unsigned int slen = 0;
-
- /*
- * Limits the amount of packets in one WQE
- * to improve CQE latency generation.
- */
- nlim = RTE_MIN(pkts_n, MLX5_EMPW_MAX_PACKETS);
- /* Check whether we have minimal amount WQEs */
- if (unlikely(loc->wqe_free <
- ((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
- return MLX5_TXCMP_CODE_EXIT;
- if (likely(pkts_n > 1))
- rte_prefetch0(*pkts);
- loc->wqe_last = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- /*
- * Build eMPW title WQEBB:
- * - Control Segment, eMPW opcode, zero DS
- * - Ethernet Segment, no inline
- */
- mlx5_tx_cseg_init(txq, loc, loc->wqe_last, 0,
- MLX5_OPCODE_ENHANCED_MPSW, olx);
- mlx5_tx_eseg_none(txq, loc, loc->wqe_last,
- olx & ~MLX5_TXOFF_CONFIG_VLAN);
- eseg = &loc->wqe_last->eseg;
- dseg = &loc->wqe_last->dseg[0];
- room = RTE_MIN(MLX5_WQE_SIZE_MAX / MLX5_WQE_SIZE,
- loc->wqe_free) * MLX5_WQE_SIZE -
- MLX5_WQE_CSEG_SIZE -
- MLX5_WQE_ESEG_SIZE;
- /* Build WQE till we have space, packets and resources. */
- part = room;
- for (;;) {
- uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
- uint8_t *dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
- unsigned int tlen;
-
- assert(room >= MLX5_WQE_DSEG_SIZE);
- assert((room % MLX5_WQE_DSEG_SIZE) == 0);
- assert((uintptr_t)dseg < (uintptr_t)txq->wqes_end);
- /*
- * Some Tx offloads may cause an error if
- * packet is not long enough, check against
- * assumed minimal length.
- */
- if (unlikely(dlen <= MLX5_ESEG_MIN_INLINE_SIZE)) {
- part -= room;
- if (unlikely(!part))
- return MLX5_TXCMP_CODE_ERROR;
- /*
- * We have some successfully built
- * packet Data Segments to send.
- */
- mlx5_tx_idone_empw(txq, loc, part, slen, olx);
- return MLX5_TXCMP_CODE_ERROR;
- }
- /* Inline or not inline - that's the Question. */
- if (dlen > txq->inlen_empw)
- goto pointer_empw;
- /* Inline entire packet, optional VLAN insertion. */
- tlen = sizeof(dseg->bcount) + dlen;
- if (MLX5_TXOFF_CONFIG(VLAN) &&
- loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
- /*
- * The packet length must be checked in
- * mlx5_tx_able_to_empw() and packet
- * fits into inline length guaranteed.
- */
- assert((dlen + sizeof(struct rte_vlan_hdr)) <=
- txq->inlen_empw);
- tlen += sizeof(struct rte_vlan_hdr);
- if (room < tlen)
- break;
- dseg = mlx5_tx_dseg_vlan(txq, loc, dseg,
- dptr, dlen, olx);
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- slen += sizeof(struct rte_vlan_hdr);
-#endif
- } else {
- if (room < tlen)
- break;
- dseg = mlx5_tx_dseg_empw(txq, loc, dseg,
- dptr, dlen, olx);
- }
- tlen = RTE_ALIGN(tlen, MLX5_WSEG_SIZE);
- assert(room >= tlen);
- room -= tlen;
- /*
- * Packet data are completely inlined,
- * free the packet immediately.
- */
- rte_pktmbuf_free_seg(loc->mbuf);
- goto next_mbuf;
-pointer_empw:
- /*
- * Not inlinable VLAN packets are
- * proceeded outside of this routine.
- */
- assert(room >= MLX5_WQE_DSEG_SIZE);
- if (MLX5_TXOFF_CONFIG(VLAN))
- assert(!(loc->mbuf->ol_flags &
- PKT_TX_VLAN_PKT));
- mlx5_tx_dseg_ptr(txq, loc, dseg, dptr, dlen, olx);
- /* We have to store mbuf in elts.*/
- txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
- room -= MLX5_WQE_DSEG_SIZE;
- /* Ring buffer wraparound is checked at the loop end.*/
- ++dseg;
-next_mbuf:
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- slen += dlen;
-#endif
- loc->pkts_sent++;
- loc->elts_free--;
- pkts_n--;
- if (unlikely(!pkts_n || !loc->elts_free)) {
- /*
- * We have no resources/packets to
- * continue build descriptors.
- */
- part -= room;
- mlx5_tx_idone_empw(txq, loc, part, slen, olx);
- return MLX5_TXCMP_CODE_EXIT;
- }
- loc->mbuf = *pkts++;
- if (likely(pkts_n > 1))
- rte_prefetch0(*pkts);
- ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
- /*
- * Unroll the completion code to avoid
- * returning variable value - it results in
- * unoptimized sequent checking in caller.
- */
- if (ret == MLX5_TXCMP_CODE_MULTI) {
- part -= room;
- mlx5_tx_idone_empw(txq, loc, part, slen, olx);
- if (unlikely(!loc->elts_free ||
- !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- return MLX5_TXCMP_CODE_MULTI;
- }
- if (ret == MLX5_TXCMP_CODE_TSO) {
- part -= room;
- mlx5_tx_idone_empw(txq, loc, part, slen, olx);
- if (unlikely(!loc->elts_free ||
- !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- return MLX5_TXCMP_CODE_TSO;
- }
- if (ret == MLX5_TXCMP_CODE_SINGLE) {
- part -= room;
- mlx5_tx_idone_empw(txq, loc, part, slen, olx);
- if (unlikely(!loc->elts_free ||
- !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- return MLX5_TXCMP_CODE_SINGLE;
- }
- if (ret != MLX5_TXCMP_CODE_EMPW) {
- assert(false);
- part -= room;
- mlx5_tx_idone_empw(txq, loc, part, slen, olx);
- return MLX5_TXCMP_CODE_ERROR;
- }
- /* Check if we have minimal room left. */
- nlim--;
- if (unlikely(!nlim || room < MLX5_WQE_DSEG_SIZE))
- break;
- /*
- * Check whether packet parameters coincide
- * within assumed eMPW batch:
- * - check sum settings
- * - metadata value
- * - software parser settings
- */
- if (!mlx5_tx_match_empw(txq, eseg, loc, olx))
- break;
- /* Packet attributes match, continue the same eMPW. */
- if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
- dseg = (struct mlx5_wqe_dseg *)txq->wqes;
- }
- /*
- * We get here to close an existing eMPW
- * session and start the new one.
- */
- assert(pkts_n);
- part -= room;
- if (unlikely(!part))
- return MLX5_TXCMP_CODE_EXIT;
- mlx5_tx_idone_empw(txq, loc, part, slen, olx);
- if (unlikely(!loc->elts_free ||
- !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- /* Continue the loop with new eMPW session. */
- }
- assert(false);
-}
-
-/**
- * The routine sends packets with ordinary MLX5_OPCODE_SEND.
- * Data inlining and VLAN insertion are supported.
- */
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_single_send(struct mlx5_txq_data *restrict txq,
- struct rte_mbuf **restrict pkts,
- unsigned int pkts_n,
- struct mlx5_txq_local *restrict loc,
- unsigned int olx)
-{
- /*
- * Subroutine is the part of mlx5_tx_burst_single()
- * and sends single-segment packet with SEND opcode.
- */
- assert(loc->elts_free && loc->wqe_free);
- assert(pkts_n > loc->pkts_sent);
- pkts += loc->pkts_sent + 1;
- pkts_n -= loc->pkts_sent;
- for (;;) {
- struct mlx5_wqe *restrict wqe;
- enum mlx5_txcmp_code ret;
-
- assert(NB_SEGS(loc->mbuf) == 1);
- if (MLX5_TXOFF_CONFIG(INLINE)) {
- unsigned int inlen, vlan = 0;
-
- inlen = rte_pktmbuf_data_len(loc->mbuf);
- if (MLX5_TXOFF_CONFIG(VLAN) &&
- loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
- vlan = sizeof(struct rte_vlan_hdr);
- inlen += vlan;
- static_assert((sizeof(struct rte_vlan_hdr) +
- sizeof(struct rte_ether_hdr)) ==
- MLX5_ESEG_MIN_INLINE_SIZE,
- "invalid min inline data size");
- }
- /*
- * If inlining is enabled at configuration time
- * the limit must be not less than minimal size.
- * Otherwise we would do extra check for data
- * size to avoid crashes due to length overflow.
- */
- assert(txq->inlen_send >= MLX5_ESEG_MIN_INLINE_SIZE);
- if (inlen <= txq->inlen_send) {
- unsigned int seg_n, wqe_n;
-
- rte_prefetch0(rte_pktmbuf_mtod
- (loc->mbuf, uint8_t *));
- /* Check against minimal length. */
- if (inlen <= MLX5_ESEG_MIN_INLINE_SIZE)
- return MLX5_TXCMP_CODE_ERROR;
- /*
- * Completely inlined packet data WQE:
- * - Control Segment, SEND opcode
- * - Ethernet Segment, no VLAN insertion
- * - Data inlined, VLAN optionally inserted
- * - Alignment to MLX5_WSEG_SIZE
- * Have to estimate amount of WQEBBs
- */
- seg_n = (inlen + 3 * MLX5_WSEG_SIZE -
- MLX5_ESEG_MIN_INLINE_SIZE +
- MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
- /* Check if there are enough WQEBBs. */
- wqe_n = (seg_n + 3) / 4;
- if (wqe_n > loc->wqe_free)
- return MLX5_TXCMP_CODE_EXIT;
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- loc->wqe_last = wqe;
- mlx5_tx_cseg_init(txq, loc, wqe, seg_n,
- MLX5_OPCODE_SEND, olx);
- mlx5_tx_eseg_data(txq, loc, wqe,
- vlan, inlen, 0, olx);
- txq->wqe_ci += wqe_n;
- loc->wqe_free -= wqe_n;
- /*
- * Packet data are completely inlined,
- * free the packet immediately.
- */
- rte_pktmbuf_free_seg(loc->mbuf);
- } else if (!MLX5_TXOFF_CONFIG(EMPW) &&
- txq->inlen_mode) {
- /*
- * If minimal inlining is requested the eMPW
- * feature should be disabled due to data is
- * inlined into Ethernet Segment, which can
- * not contain inlined data for eMPW due to
- * segment shared for all packets.
- */
- struct mlx5_wqe_dseg *restrict dseg;
- unsigned int ds;
- uint8_t *dptr;
-
- /*
- * The inline-mode settings require
- * to inline the specified amount of
- * data bytes to the Ethernet Segment.
- * We should check the free space in
- * WQE ring buffer to inline partially.
- */
- assert(txq->inlen_send >= txq->inlen_mode);
- assert(inlen > txq->inlen_mode);
- assert(txq->inlen_mode >=
- MLX5_ESEG_MIN_INLINE_SIZE);
- /*
- * Check whether there are enough free WQEBBs:
- * - Control Segment
- * - Ethernet Segment
- * - First Segment of inlined Ethernet data
- * - ... data continued ...
- * - Finishing Data Segment of pointer type
- */
- ds = (MLX5_WQE_CSEG_SIZE +
- MLX5_WQE_ESEG_SIZE +
- MLX5_WQE_DSEG_SIZE +
- txq->inlen_mode -
- MLX5_ESEG_MIN_INLINE_SIZE +
- MLX5_WQE_DSEG_SIZE +
- MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
- if (loc->wqe_free < ((ds + 3) / 4))
- return MLX5_TXCMP_CODE_EXIT;
- /*
- * Build the ordinary SEND WQE:
- * - Control Segment
- * - Ethernet Segment, inline inlen_mode bytes
- * - Data Segment of pointer type
- */
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- loc->wqe_last = wqe;
- mlx5_tx_cseg_init(txq, loc, wqe, ds,
- MLX5_OPCODE_SEND, olx);
- dseg = mlx5_tx_eseg_data(txq, loc, wqe, vlan,
- txq->inlen_mode,
- 0, olx);
- dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) +
- txq->inlen_mode - vlan;
- inlen -= txq->inlen_mode;
- mlx5_tx_dseg_ptr(txq, loc, dseg,
- dptr, inlen, olx);
- /*
- * WQE is built, update the loop parameters
- * and got to the next packet.
- */
- txq->wqe_ci += (ds + 3) / 4;
- loc->wqe_free -= (ds + 3) / 4;
- /* We have to store mbuf in elts.*/
- assert(MLX5_TXOFF_CONFIG(INLINE));
- txq->elts[txq->elts_head++ & txq->elts_m] =
- loc->mbuf;
- --loc->elts_free;
- } else {
- uint8_t *dptr;
- unsigned int dlen;
-
- /*
- * Partially inlined packet data WQE, we have
- * some space in title WQEBB, we can fill it
- * with some packet data. It takes one WQEBB,
- * it is available, no extra space check:
- * - Control Segment, SEND opcode
- * - Ethernet Segment, no VLAN insertion
- * - MLX5_ESEG_MIN_INLINE_SIZE bytes of Data
- * - Data Segment, pointer type
- *
- * We also get here if VLAN insertion is not
- * supported by HW, the inline is enabled.
- */
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- loc->wqe_last = wqe;
- mlx5_tx_cseg_init(txq, loc, wqe, 4,
- MLX5_OPCODE_SEND, olx);
- mlx5_tx_eseg_dmin(txq, loc, wqe, vlan, olx);
- dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) +
- MLX5_ESEG_MIN_INLINE_SIZE - vlan;
- /*
- * The length check is performed above, by
- * comparing with txq->inlen_send. We should
- * not get overflow here.
- */
- assert(inlen > MLX5_ESEG_MIN_INLINE_SIZE);
- dlen = inlen - MLX5_ESEG_MIN_INLINE_SIZE;
- mlx5_tx_dseg_ptr(txq, loc, &wqe->dseg[1],
- dptr, dlen, olx);
- ++txq->wqe_ci;
- --loc->wqe_free;
- /* We have to store mbuf in elts.*/
- assert(MLX5_TXOFF_CONFIG(INLINE));
- txq->elts[txq->elts_head++ & txq->elts_m] =
- loc->mbuf;
- --loc->elts_free;
- }
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- txq->stats.obytes += vlan +
- rte_pktmbuf_data_len(loc->mbuf);
-#endif
- } else {
- /*
- * No inline at all, it means the CPU cycles saving
- * is prioritized at configuration, we should not
- * copy any packet data to WQE.
- *
- * SEND WQE, one WQEBB:
- * - Control Segment, SEND opcode
- * - Ethernet Segment, optional VLAN, no inline
- * - Data Segment, pointer type
- */
- wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
- loc->wqe_last = wqe;
- mlx5_tx_cseg_init(txq, loc, wqe, 3,
- MLX5_OPCODE_SEND, olx);
- mlx5_tx_eseg_none(txq, loc, wqe, olx);
- mlx5_tx_dseg_ptr
- (txq, loc, &wqe->dseg[0],
- rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
- rte_pktmbuf_data_len(loc->mbuf), olx);
- ++txq->wqe_ci;
- --loc->wqe_free;
- /*
- * We should not store mbuf pointer in elts
- * if no inlining is configured, this is done
- * by calling routine in a batch copy.
- */
- assert(!MLX5_TXOFF_CONFIG(INLINE));
- --loc->elts_free;
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Update sent data bytes counter. */
- txq->stats.obytes += rte_pktmbuf_data_len(loc->mbuf);
- if (MLX5_TXOFF_CONFIG(VLAN) &&
- loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
- txq->stats.obytes +=
- sizeof(struct rte_vlan_hdr);
-#endif
- }
- ++loc->pkts_sent;
- --pkts_n;
- /* Request CQE generation if limits are reached. */
- mlx5_tx_request_completion(txq, loc, false, olx);
- if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
- return MLX5_TXCMP_CODE_EXIT;
- loc->mbuf = *pkts++;
- if (pkts_n > 1)
- rte_prefetch0(*pkts);
- ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
- if (unlikely(ret != MLX5_TXCMP_CODE_SINGLE))
- return ret;
- }
- assert(false);
-}
-
-static __rte_always_inline enum mlx5_txcmp_code
-mlx5_tx_burst_single(struct mlx5_txq_data *restrict txq,
- struct rte_mbuf **restrict pkts,
- unsigned int pkts_n,
- struct mlx5_txq_local *restrict loc,
- unsigned int olx)
-{
- enum mlx5_txcmp_code ret;
-
- ret = mlx5_tx_able_to_empw(txq, loc, olx, false);
- if (ret == MLX5_TXCMP_CODE_SINGLE)
- goto ordinary_send;
- assert(ret == MLX5_TXCMP_CODE_EMPW);
- for (;;) {
- /* Optimize for inline/no inline eMPW send. */
- ret = (MLX5_TXOFF_CONFIG(INLINE)) ?
- mlx5_tx_burst_empw_inline
- (txq, pkts, pkts_n, loc, olx) :
- mlx5_tx_burst_empw_simple
- (txq, pkts, pkts_n, loc, olx);
- if (ret != MLX5_TXCMP_CODE_SINGLE)
- return ret;
- /* The resources to send one packet should remain. */
- assert(loc->elts_free && loc->wqe_free);
-ordinary_send:
- ret = mlx5_tx_burst_single_send(txq, pkts, pkts_n, loc, olx);
- assert(ret != MLX5_TXCMP_CODE_SINGLE);
- if (ret != MLX5_TXCMP_CODE_EMPW)
- return ret;
- /* The resources to send one packet should remain. */
- assert(loc->elts_free && loc->wqe_free);
- }
-}
-
-/**
- * DPDK Tx callback template. This is configured template
- * used to generate routines optimized for specified offload setup.
- * One of this generated functions is chosen at SQ configuration
- * time.
- *
- * @param txq
- * Generic pointer to TX queue structure.
- * @param[in] pkts
- * Packets to transmit.
- * @param pkts_n
- * Number of packets in array.
- * @param olx
- * Configured offloads mask, presents the bits of MLX5_TXOFF_CONFIG_xxx
- * values. Should be static to take compile time static configuration
- * advantages.
- *
- * @return
- * Number of packets successfully transmitted (<= pkts_n).
- */
-static __rte_always_inline uint16_t
-mlx5_tx_burst_tmpl(struct mlx5_txq_data *restrict txq,
- struct rte_mbuf **restrict pkts,
- uint16_t pkts_n,
- unsigned int olx)
-{
- struct mlx5_txq_local loc;
- enum mlx5_txcmp_code ret;
- unsigned int part;
-
- assert(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
- assert(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
- if (unlikely(!pkts_n))
- return 0;
- loc.pkts_sent = 0;
- loc.pkts_copy = 0;
- loc.wqe_last = NULL;
-
-send_loop:
- loc.pkts_loop = loc.pkts_sent;
- /*
- * Check if there are some CQEs, if any:
- * - process an encountered errors
- * - process the completed WQEs
- * - free related mbufs
- * - doorbell the NIC about processed CQEs
- */
- rte_prefetch0(*(pkts + loc.pkts_sent));
- mlx5_tx_handle_completion(txq, olx);
- /*
- * Calculate the number of available resources - elts and WQEs.
- * There are two possible different scenarios:
- * - no data inlining into WQEs, one WQEBB may contains upto
- * four packets, in this case elts become scarce resource
- * - data inlining into WQEs, one packet may require multiple
- * WQEBBs, the WQEs become the limiting factor.
- */
- assert(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
- loc.elts_free = txq->elts_s -
- (uint16_t)(txq->elts_head - txq->elts_tail);
- assert(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
- loc.wqe_free = txq->wqe_s -
- (uint16_t)(txq->wqe_ci - txq->wqe_pi);
- if (unlikely(!loc.elts_free || !loc.wqe_free))
- goto burst_exit;
- for (;;) {
- /*
- * Fetch the packet from array. Usually this is
- * the first packet in series of multi/single
- * segment packets.
- */
- loc.mbuf = *(pkts + loc.pkts_sent);
- /* Dedicated branch for multi-segment packets. */
- if (MLX5_TXOFF_CONFIG(MULTI) &&
- unlikely(NB_SEGS(loc.mbuf) > 1)) {
- /*
- * Multi-segment packet encountered.
- * Hardware is able to process it only
- * with SEND/TSO opcodes, one packet
- * per WQE, do it in dedicated routine.
- */
-enter_send_multi:
- assert(loc.pkts_sent >= loc.pkts_copy);
- part = loc.pkts_sent - loc.pkts_copy;
- if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
- /*
- * There are some single-segment mbufs not
- * stored in elts. The mbufs must be in the
- * same order as WQEs, so we must copy the
- * mbufs to elts here, before the coming
- * multi-segment packet mbufs is appended.
- */
- mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy,
- part, olx);
- loc.pkts_copy = loc.pkts_sent;
- }
- assert(pkts_n > loc.pkts_sent);
- ret = mlx5_tx_burst_mseg(txq, pkts, pkts_n, &loc, olx);
- if (!MLX5_TXOFF_CONFIG(INLINE))
- loc.pkts_copy = loc.pkts_sent;
- /*
- * These returned code checks are supposed
- * to be optimized out due to routine inlining.
- */
- if (ret == MLX5_TXCMP_CODE_EXIT) {
- /*
- * The routine returns this code when
- * all packets are sent or there is no
- * enough resources to complete request.
- */
- break;
- }
- if (ret == MLX5_TXCMP_CODE_ERROR) {
- /*
- * The routine returns this code when
- * some error in the incoming packets
- * format occurred.
- */
- txq->stats.oerrors++;
- break;
- }
- if (ret == MLX5_TXCMP_CODE_SINGLE) {
- /*
- * The single-segment packet was encountered
- * in the array, try to send it with the
- * best optimized way, possible engaging eMPW.
- */
- goto enter_send_single;
- }
- if (MLX5_TXOFF_CONFIG(TSO) &&
- ret == MLX5_TXCMP_CODE_TSO) {
- /*
- * The single-segment TSO packet was
- * encountered in the array.
- */
- goto enter_send_tso;
- }
- /* We must not get here. Something is going wrong. */
- assert(false);
- txq->stats.oerrors++;
- break;
- }
- /* Dedicated branch for single-segment TSO packets. */
- if (MLX5_TXOFF_CONFIG(TSO) &&
- unlikely(loc.mbuf->ol_flags & PKT_TX_TCP_SEG)) {
- /*
- * TSO might require special way for inlining
- * (dedicated parameters) and is sent with
- * MLX5_OPCODE_TSO opcode only, provide this
- * in dedicated branch.
- */
-enter_send_tso:
- assert(NB_SEGS(loc.mbuf) == 1);
- assert(pkts_n > loc.pkts_sent);
- ret = mlx5_tx_burst_tso(txq, pkts, pkts_n, &loc, olx);
- /*
- * These returned code checks are supposed
- * to be optimized out due to routine inlining.
- */
- if (ret == MLX5_TXCMP_CODE_EXIT)
- break;
- if (ret == MLX5_TXCMP_CODE_ERROR) {
- txq->stats.oerrors++;
- break;
- }
- if (ret == MLX5_TXCMP_CODE_SINGLE)
- goto enter_send_single;
- if (MLX5_TXOFF_CONFIG(MULTI) &&
- ret == MLX5_TXCMP_CODE_MULTI) {
- /*
- * The multi-segment packet was
- * encountered in the array.
- */
- goto enter_send_multi;
- }
- /* We must not get here. Something is going wrong. */
- assert(false);
- txq->stats.oerrors++;
- break;
- }
- /*
- * The dedicated branch for the single-segment packets
- * without TSO. Often these ones can be sent using
- * MLX5_OPCODE_EMPW with multiple packets in one WQE.
- * The routine builds the WQEs till it encounters
- * the TSO or multi-segment packet (in case if these
- * offloads are requested at SQ configuration time).
- */
-enter_send_single:
- assert(pkts_n > loc.pkts_sent);
- ret = mlx5_tx_burst_single(txq, pkts, pkts_n, &loc, olx);
- /*
- * These returned code checks are supposed
- * to be optimized out due to routine inlining.
- */
- if (ret == MLX5_TXCMP_CODE_EXIT)
- break;
- if (ret == MLX5_TXCMP_CODE_ERROR) {
- txq->stats.oerrors++;
- break;
- }
- if (MLX5_TXOFF_CONFIG(MULTI) &&
- ret == MLX5_TXCMP_CODE_MULTI) {
- /*
- * The multi-segment packet was
- * encountered in the array.
- */
- goto enter_send_multi;
- }
- if (MLX5_TXOFF_CONFIG(TSO) &&
- ret == MLX5_TXCMP_CODE_TSO) {
- /*
- * The single-segment TSO packet was
- * encountered in the array.
- */
- goto enter_send_tso;
- }
- /* We must not get here. Something is going wrong. */
- assert(false);
- txq->stats.oerrors++;
- break;
- }
- /*
- * Main Tx loop is completed, do the rest:
- * - set completion request if thresholds are reached
- * - doorbell the hardware
- * - copy the rest of mbufs to elts (if any)
- */
- assert(MLX5_TXOFF_CONFIG(INLINE) || loc.pkts_sent >= loc.pkts_copy);
- /* Take a shortcut if nothing is sent. */
- if (unlikely(loc.pkts_sent == loc.pkts_loop))
- goto burst_exit;
- /*
- * Ring QP doorbell immediately after WQE building completion
- * to improve latencies. The pure software related data treatment
- * can be completed after doorbell. Tx CQEs for this SQ are
- * processed in this thread only by the polling.
- */
- mlx5_tx_dbrec_cond_wmb(txq, loc.wqe_last, 0);
- /* Not all of the mbufs may be stored into elts yet. */
- part = MLX5_TXOFF_CONFIG(INLINE) ? 0 : loc.pkts_sent - loc.pkts_copy;
- if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
- /*
- * There are some single-segment mbufs not stored in elts.
- * It can be only if the last packet was single-segment.
- * The copying is gathered into one place due to it is
- * a good opportunity to optimize that with SIMD.
- * Unfortunately if inlining is enabled the gaps in
- * pointer array may happen due to early freeing of the
- * inlined mbufs.
- */
- mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy, part, olx);
- loc.pkts_copy = loc.pkts_sent;
- }
- assert(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
- assert(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
- if (pkts_n > loc.pkts_sent) {
- /*
- * If burst size is large there might be no enough CQE
- * fetched from completion queue and no enough resources
- * freed to send all the packets.
- */
- goto send_loop;
- }
-burst_exit:
-#ifdef MLX5_PMD_SOFT_COUNTERS
- /* Increment sent packets counter. */
- txq->stats.opackets += loc.pkts_sent;
-#endif
- return loc.pkts_sent;
-}
-
-/* Generate routines with Enhanced Multi-Packet Write support. */
-MLX5_TXOFF_DECL(full_empw,
- MLX5_TXOFF_CONFIG_FULL | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_DECL(none_empw,
- MLX5_TXOFF_CONFIG_NONE | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_DECL(md_empw,
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_DECL(mt_empw,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_DECL(mtsc_empw,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_DECL(mti_empw,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_INLINE |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_DECL(mtv_empw,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_DECL(mtiv_empw,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_DECL(sc_empw,
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_DECL(sci_empw,
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_INLINE |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_DECL(scv_empw,
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_DECL(sciv_empw,
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_DECL(i_empw,
- MLX5_TXOFF_CONFIG_INLINE |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_DECL(v_empw,
- MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_DECL(iv_empw,
- MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-/* Generate routines without Enhanced Multi-Packet Write support. */
-MLX5_TXOFF_DECL(full,
- MLX5_TXOFF_CONFIG_FULL)
-
-MLX5_TXOFF_DECL(none,
- MLX5_TXOFF_CONFIG_NONE)
-
-MLX5_TXOFF_DECL(md,
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_DECL(mt,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_DECL(mtsc,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_DECL(mti,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_INLINE |
- MLX5_TXOFF_CONFIG_METADATA)
-
-
-MLX5_TXOFF_DECL(mtv,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA)
-
-
-MLX5_TXOFF_DECL(mtiv,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_DECL(sc,
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_DECL(sci,
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_INLINE |
- MLX5_TXOFF_CONFIG_METADATA)
-
-
-MLX5_TXOFF_DECL(scv,
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA)
-
-
-MLX5_TXOFF_DECL(sciv,
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_DECL(i,
- MLX5_TXOFF_CONFIG_INLINE |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_DECL(v,
- MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_DECL(iv,
- MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA)
-
-/*
- * Array of declared and compiled Tx burst function and corresponding
- * supported offloads set. The array is used to select the Tx burst
- * function for specified offloads set at Tx queue configuration time.
- */
-const struct {
- eth_tx_burst_t func;
- unsigned int olx;
-} txoff_func[] = {
-MLX5_TXOFF_INFO(full_empw,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_INFO(none_empw,
- MLX5_TXOFF_CONFIG_NONE | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_INFO(md_empw,
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_INFO(mt_empw,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_INFO(mtsc_empw,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_INFO(mti_empw,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_INLINE |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_INFO(mtv_empw,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_INFO(mtiv_empw,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_INFO(sc_empw,
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_INFO(sci_empw,
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_INLINE |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_INFO(scv_empw,
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_INFO(sciv_empw,
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_INFO(i_empw,
- MLX5_TXOFF_CONFIG_INLINE |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_INFO(v_empw,
- MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_INFO(iv_empw,
- MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
-
-MLX5_TXOFF_INFO(full,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_INFO(none,
- MLX5_TXOFF_CONFIG_NONE)
-
-MLX5_TXOFF_INFO(md,
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_INFO(mt,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_INFO(mtsc,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_INFO(mti,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_INLINE |
- MLX5_TXOFF_CONFIG_METADATA)
-
-
-MLX5_TXOFF_INFO(mtv,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_INFO(mtiv,
- MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
- MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_INFO(sc,
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_INFO(sci,
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_INLINE |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_INFO(scv,
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_INFO(sciv,
- MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
- MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_INFO(i,
- MLX5_TXOFF_CONFIG_INLINE |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_INFO(v,
- MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA)
-
-MLX5_TXOFF_INFO(iv,
- MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
- MLX5_TXOFF_CONFIG_METADATA)
-};
-
-/**
- * Configure the Tx function to use. The routine checks configured
- * Tx offloads for the device and selects appropriate Tx burst
- * routine. There are multiple Tx burst routines compiled from
- * the same template in the most optimal way for the dedicated
- * Tx offloads set.
- *
- * @param dev
- * Pointer to private data structure.
- *
- * @return
- * Pointer to selected Tx burst function.
- */
-eth_tx_burst_t
-mlx5_select_tx_function(struct rte_eth_dev *dev)
-{
- struct mlx5_priv *priv = dev->data->dev_private;
- struct mlx5_dev_config *config = &priv->config;
- uint64_t tx_offloads = dev->data->dev_conf.txmode.offloads;
- unsigned int diff = 0, olx = 0, i, m;
-
- static_assert(MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE <=
- MLX5_DSEG_MAX, "invalid WQE max size");
- static_assert(MLX5_WQE_CSEG_SIZE == MLX5_WSEG_SIZE,
- "invalid WQE Control Segment size");
- static_assert(MLX5_WQE_ESEG_SIZE == MLX5_WSEG_SIZE,
- "invalid WQE Ethernet Segment size");
- static_assert(MLX5_WQE_DSEG_SIZE == MLX5_WSEG_SIZE,
- "invalid WQE Data Segment size");
- static_assert(MLX5_WQE_SIZE == 4 * MLX5_WSEG_SIZE,
- "invalid WQE size");
- assert(priv);
- if (tx_offloads & DEV_TX_OFFLOAD_MULTI_SEGS) {
- /* We should support Multi-Segment Packets. */
- olx |= MLX5_TXOFF_CONFIG_MULTI;
- }
- if (tx_offloads & (DEV_TX_OFFLOAD_TCP_TSO |
- DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
- DEV_TX_OFFLOAD_GRE_TNL_TSO |
- DEV_TX_OFFLOAD_IP_TNL_TSO |
- DEV_TX_OFFLOAD_UDP_TNL_TSO)) {
- /* We should support TCP Send Offload. */
- olx |= MLX5_TXOFF_CONFIG_TSO;
- }
- if (tx_offloads & (DEV_TX_OFFLOAD_IP_TNL_TSO |
- DEV_TX_OFFLOAD_UDP_TNL_TSO |
- DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM)) {
- /* We should support Software Parser for Tunnels. */
- olx |= MLX5_TXOFF_CONFIG_SWP;
- }
- if (tx_offloads & (DEV_TX_OFFLOAD_IPV4_CKSUM |
- DEV_TX_OFFLOAD_UDP_CKSUM |
- DEV_TX_OFFLOAD_TCP_CKSUM |
- DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM)) {
- /* We should support IP/TCP/UDP Checksums. */
- olx |= MLX5_TXOFF_CONFIG_CSUM;
- }
- if (tx_offloads & DEV_TX_OFFLOAD_VLAN_INSERT) {
- /* We should support VLAN insertion. */
- olx |= MLX5_TXOFF_CONFIG_VLAN;
- }
- if (priv->txqs_n && (*priv->txqs)[0]) {
- struct mlx5_txq_data *txd = (*priv->txqs)[0];
-
- if (txd->inlen_send) {
- /*
- * Check the data inline requirements. Data inline
- * is enabled on per device basis, we can check
- * the first Tx queue only.
- *
- * If device does not support VLAN insertion in WQE
- * and some queues are requested to perform VLAN
- * insertion offload than inline must be enabled.
- */
- olx |= MLX5_TXOFF_CONFIG_INLINE;
- }
- }
- if (config->mps == MLX5_MPW_ENHANCED &&
- config->txq_inline_min <= 0) {
- /*
- * The NIC supports Enhanced Multi-Packet Write.
- * We do not support legacy MPW due to its
- * hardware related problems, so we just ignore
- * legacy MLX5_MPW settings. There should be no
- * minimal required inline data.
- */
- olx |= MLX5_TXOFF_CONFIG_EMPW;
- }
- if (rte_flow_dynf_metadata_avail()) {
- /* We should support Flow metadata. */
- olx |= MLX5_TXOFF_CONFIG_METADATA;
- }
- /*
- * Scan the routines table to find the minimal
- * satisfying routine with requested offloads.
- */
- m = RTE_DIM(txoff_func);
- for (i = 0; i < RTE_DIM(txoff_func); i++) {
- unsigned int tmp;
-
- tmp = txoff_func[i].olx;
- if (tmp == olx) {
- /* Meets requested offloads exactly.*/
- m = i;
- break;
- }
- if ((tmp & olx) != olx) {
- /* Does not meet requested offloads at all. */
- continue;
- }
- if ((olx ^ tmp) & MLX5_TXOFF_CONFIG_EMPW)
- /* Do not enable eMPW if not configured. */
- continue;
- if ((olx ^ tmp) & MLX5_TXOFF_CONFIG_INLINE)
- /* Do not enable inlining if not configured. */
- continue;
- /*
- * Some routine meets the requirements.
- * Check whether it has minimal amount
- * of not requested offloads.
- */
- tmp = __builtin_popcountl(tmp & ~olx);
- if (m >= RTE_DIM(txoff_func) || tmp < diff) {
- /* First or better match, save and continue. */
- m = i;
- diff = tmp;
- continue;
- }
- if (tmp == diff) {
- tmp = txoff_func[i].olx ^ txoff_func[m].olx;
- if (__builtin_ffsl(txoff_func[i].olx & ~tmp) <
- __builtin_ffsl(txoff_func[m].olx & ~tmp)) {
- /* Lighter not requested offload. */
- m = i;
- }
- }
- }
- if (m >= RTE_DIM(txoff_func)) {
- DRV_LOG(DEBUG, "port %u has no selected Tx function"
- " for requested offloads %04X",
- dev->data->port_id, olx);
- return NULL;
- }
- DRV_LOG(DEBUG, "port %u has selected Tx function"
- " supporting offloads %04X/%04X",
- dev->data->port_id, olx, txoff_func[m].olx);
- if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_MULTI)
- DRV_LOG(DEBUG, "\tMULTI (multi segment)");
- if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_TSO)
- DRV_LOG(DEBUG, "\tTSO (TCP send offload)");
- if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_SWP)
- DRV_LOG(DEBUG, "\tSWP (software parser)");
- if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_CSUM)
- DRV_LOG(DEBUG, "\tCSUM (checksum offload)");
- if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_INLINE)
- DRV_LOG(DEBUG, "\tINLIN (inline data)");
- if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_VLAN)
- DRV_LOG(DEBUG, "\tVLANI (VLAN insertion)");
- if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_METADATA)
- DRV_LOG(DEBUG, "\tMETAD (tx Flow metadata)");
- if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_EMPW)
- DRV_LOG(DEBUG, "\tEMPW (Enhanced MPW)");
- return txoff_func[m].func;
-}