+ if (((RTE_ETH_TX_OFFLOAD_VXLAN_TNL_TSO & txq_ctrl->txq.offloads) &&
+ (config->tunnel_en & MLX5_TUNNELED_OFFLOADS_VXLAN_CAP)) |
+ ((RTE_ETH_TX_OFFLOAD_GRE_TNL_TSO & txq_ctrl->txq.offloads) &&
+ (config->tunnel_en & MLX5_TUNNELED_OFFLOADS_GRE_CAP)) |
+ ((RTE_ETH_TX_OFFLOAD_GENEVE_TNL_TSO & txq_ctrl->txq.offloads) &&
+ (config->tunnel_en & MLX5_TUNNELED_OFFLOADS_GENEVE_CAP)) |
+ (config->swp & MLX5_SW_PARSING_TSO_CAP))
+ txq_ctrl->txq.tunnel_en = 1;
+ txq_ctrl->txq.swp_en = (((RTE_ETH_TX_OFFLOAD_IP_TNL_TSO |
+ RTE_ETH_TX_OFFLOAD_UDP_TNL_TSO) &
+ txq_ctrl->txq.offloads) && (config->swp &
+ MLX5_SW_PARSING_TSO_CAP)) |
+ ((RTE_ETH_TX_OFFLOAD_OUTER_IPV4_CKSUM &
+ txq_ctrl->txq.offloads) && (config->swp &
+ MLX5_SW_PARSING_CSUM_CAP));
+}
+
+/**
+ * Adjust Tx queue data inline parameters for large queue sizes.
+ * The data inline feature requires multiple WQEs to fit the packets,
+ * and if the large amount of Tx descriptors is requested by application
+ * the total WQE amount may exceed the hardware capabilities. If the
+ * default inline setting are used we can try to adjust these ones and
+ * meet the hardware requirements and not exceed the queue size.
+ *
+ * @param txq_ctrl
+ * Pointer to Tx queue control structure.
+ *
+ * @return
+ * Zero on success, otherwise the parameters can not be adjusted.
+ */
+static int
+txq_adjust_params(struct mlx5_txq_ctrl *txq_ctrl)
+{
+ struct mlx5_priv *priv = txq_ctrl->priv;
+ struct mlx5_dev_config *config = &priv->config;
+ unsigned int max_inline;
+
+ max_inline = txq_calc_inline_max(txq_ctrl);
+ if (!txq_ctrl->txq.inlen_send) {
+ /*
+ * Inline data feature is not engaged at all.
+ * There is nothing to adjust.
+ */
+ return 0;
+ }
+ if (txq_ctrl->max_inline_data <= max_inline) {
+ /*
+ * The requested inline data length does not
+ * exceed queue capabilities.
+ */
+ return 0;
+ }
+ if (txq_ctrl->txq.inlen_mode > max_inline) {
+ DRV_LOG(ERR,
+ "minimal data inline requirements (%u) are not"
+ " satisfied (%u) on port %u, try the smaller"
+ " Tx queue size (%d)",
+ txq_ctrl->txq.inlen_mode, max_inline,
+ priv->dev_data->port_id,
+ priv->sh->device_attr.max_qp_wr);
+ goto error;
+ }
+ if (txq_ctrl->txq.inlen_send > max_inline &&
+ config->txq_inline_max != MLX5_ARG_UNSET &&
+ config->txq_inline_max > (int)max_inline) {
+ DRV_LOG(ERR,
+ "txq_inline_max requirements (%u) are not"
+ " satisfied (%u) on port %u, try the smaller"
+ " Tx queue size (%d)",
+ txq_ctrl->txq.inlen_send, max_inline,
+ priv->dev_data->port_id,
+ priv->sh->device_attr.max_qp_wr);
+ goto error;
+ }
+ if (txq_ctrl->txq.inlen_empw > max_inline &&
+ config->txq_inline_mpw != MLX5_ARG_UNSET &&
+ config->txq_inline_mpw > (int)max_inline) {
+ DRV_LOG(ERR,
+ "txq_inline_mpw requirements (%u) are not"
+ " satisfied (%u) on port %u, try the smaller"
+ " Tx queue size (%d)",
+ txq_ctrl->txq.inlen_empw, max_inline,
+ priv->dev_data->port_id,
+ priv->sh->device_attr.max_qp_wr);
+ goto error;
+ }
+ if (txq_ctrl->txq.tso_en && max_inline < MLX5_MAX_TSO_HEADER) {
+ DRV_LOG(ERR,
+ "tso header inline requirements (%u) are not"
+ " satisfied (%u) on port %u, try the smaller"
+ " Tx queue size (%d)",
+ MLX5_MAX_TSO_HEADER, max_inline,
+ priv->dev_data->port_id,
+ priv->sh->device_attr.max_qp_wr);
+ goto error;
+ }
+ if (txq_ctrl->txq.inlen_send > max_inline) {
+ DRV_LOG(WARNING,
+ "adjust txq_inline_max (%u->%u)"
+ " due to large Tx queue on port %u",
+ txq_ctrl->txq.inlen_send, max_inline,
+ priv->dev_data->port_id);
+ txq_ctrl->txq.inlen_send = max_inline;
+ }
+ if (txq_ctrl->txq.inlen_empw > max_inline) {
+ DRV_LOG(WARNING,
+ "adjust txq_inline_mpw (%u->%u)"
+ "due to large Tx queue on port %u",
+ txq_ctrl->txq.inlen_empw, max_inline,
+ priv->dev_data->port_id);
+ txq_ctrl->txq.inlen_empw = max_inline;
+ }
+ txq_ctrl->max_inline_data = RTE_MAX(txq_ctrl->txq.inlen_send,
+ txq_ctrl->txq.inlen_empw);
+ MLX5_ASSERT(txq_ctrl->max_inline_data <= max_inline);
+ MLX5_ASSERT(txq_ctrl->txq.inlen_mode <= max_inline);
+ MLX5_ASSERT(txq_ctrl->txq.inlen_mode <= txq_ctrl->txq.inlen_send);
+ MLX5_ASSERT(txq_ctrl->txq.inlen_mode <= txq_ctrl->txq.inlen_empw ||
+ !txq_ctrl->txq.inlen_empw);
+ return 0;
+error:
+ rte_errno = ENOMEM;
+ return -ENOMEM;