+ /* Board configuration (legacy) */
+ rc = efx_mcdi_get_board_cfg(enp, &board_type, NULL, NULL);
+ if (rc != 0) {
+ /* Unprivileged functions may not be able to read board cfg */
+ if (rc == EACCES)
+ board_type = 0;
+ else
+ goto fail5;
+ }
+
+ encp->enc_board_type = board_type;
+ encp->enc_clk_mult = 1; /* not used for EF10 */
+
+ /* Fill out fields in enp->en_port and enp->en_nic_cfg from MCDI */
+ if ((rc = efx_mcdi_get_phy_cfg(enp)) != 0)
+ goto fail6;
+
+ /*
+ * Firmware with support for *_FEC capability bits does not
+ * report that the corresponding *_FEC_REQUESTED bits are supported.
+ * Add them here so that drivers understand that they are supported.
+ */
+ if (epp->ep_phy_cap_mask & (1u << EFX_PHY_CAP_BASER_FEC))
+ epp->ep_phy_cap_mask |=
+ (1u << EFX_PHY_CAP_BASER_FEC_REQUESTED);
+ if (epp->ep_phy_cap_mask & (1u << EFX_PHY_CAP_RS_FEC))
+ epp->ep_phy_cap_mask |=
+ (1u << EFX_PHY_CAP_RS_FEC_REQUESTED);
+ if (epp->ep_phy_cap_mask & (1u << EFX_PHY_CAP_25G_BASER_FEC))
+ epp->ep_phy_cap_mask |=
+ (1u << EFX_PHY_CAP_25G_BASER_FEC_REQUESTED);
+
+ /* Obtain the default PHY advertised capabilities */
+ if ((rc = ef10_phy_get_link(enp, &els)) != 0)
+ goto fail7;
+ epp->ep_default_adv_cap_mask = els.epls.epls_adv_cap_mask;
+ epp->ep_adv_cap_mask = els.epls.epls_adv_cap_mask;
+
+ /* Check capabilities of running datapath firmware */
+ if ((rc = ef10_get_datapath_caps(enp)) != 0)
+ goto fail8;
+
+ /* Alignment for WPTR updates */
+ encp->enc_rx_push_align = EF10_RX_WPTR_ALIGN;
+
+ encp->enc_tx_dma_desc_size_max = EFX_MASK32(ESF_DZ_RX_KER_BYTE_CNT);
+ /* No boundary crossing limits */
+ encp->enc_tx_dma_desc_boundary = 0;
+
+ /*
+ * Maximum number of bytes into the frame the TCP header can start for
+ * firmware assisted TSO to work.
+ */
+ encp->enc_tx_tso_tcp_header_offset_limit = EF10_TCP_HEADER_OFFSET_LIMIT;
+
+ /*
+ * Set resource limits for MC_CMD_ALLOC_VIS. Note that we cannot use
+ * MC_CMD_GET_RESOURCE_LIMITS here as that reports the available
+ * resources (allocated to this PCIe function), which is zero until
+ * after we have allocated VIs.
+ */
+ encp->enc_evq_limit = 1024;
+ encp->enc_rxq_limit = EFX_RXQ_LIMIT_TARGET;
+ encp->enc_txq_limit = EFX_TXQ_LIMIT_TARGET;
+
+ encp->enc_buftbl_limit = 0xFFFFFFFF;
+
+ /* Get interrupt vector limits */
+ if ((rc = efx_mcdi_get_vector_cfg(enp, &base, &nvec, NULL)) != 0) {
+ if (EFX_PCI_FUNCTION_IS_PF(encp))
+ goto fail9;
+
+ /* Ignore error (cannot query vector limits from a VF). */
+ base = 0;
+ nvec = 1024;
+ }
+ encp->enc_intr_vec_base = base;
+ encp->enc_intr_limit = nvec;
+
+ /*
+ * Get the current privilege mask. Note that this may be modified
+ * dynamically, so this value is informational only. DO NOT use
+ * the privilege mask to check for sufficient privileges, as that
+ * can result in time-of-check/time-of-use bugs.
+ */
+ if ((rc = ef10_get_privilege_mask(enp, &mask)) != 0)
+ goto fail10;
+ encp->enc_privilege_mask = mask;
+