- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
#define NB_CLONE_MBUF (NB_PKT_MBUF * MCAST_CLONE_PORTS * MCAST_CLONE_SEGS * 2)
/* allow max jumbo frame 9.5 KB */
#define JUMBO_FRAME_MAX_SIZE 0x2600
#define NB_CLONE_MBUF (NB_PKT_MBUF * MCAST_CLONE_PORTS * MCAST_CLONE_SEGS * 2)
/* allow max jumbo frame 9.5 KB */
#define JUMBO_FRAME_MAX_SIZE 0x2600
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-#define RX_PTHRESH 8 /**< Default values of RX prefetch threshold reg. */
-#define RX_HTHRESH 8 /**< Default values of RX host threshold reg. */
-#define RX_WTHRESH 4 /**< Default values of RX write-back threshold reg. */
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-#define TX_PTHRESH 36 /**< Default values of TX prefetch threshold reg. */
-#define TX_HTHRESH 0 /**< Default values of TX host threshold reg. */
-#define TX_WTHRESH 0 /**< Default values of TX write-back threshold reg. */
-
-static const struct rte_eth_rxconf rx_conf = {
- .rx_thresh = {
- .pthresh = RX_PTHRESH,
- .hthresh = RX_HTHRESH,
- .wthresh = RX_WTHRESH,
- },
-};
-
-static const struct rte_eth_txconf tx_conf = {
- .tx_thresh = {
- .pthresh = TX_PTHRESH,
- .hthresh = TX_HTHRESH,
- .wthresh = TX_WTHRESH,
- },
- .tx_free_thresh = 0, /* Use PMD default values */
- .tx_rs_thresh = 0, /* Use PMD default values */
-};
-
/* If requested, then make a new clone packet. */
if (use_clone != 0 &&
unlikely ((pkt = rte_pktmbuf_clone(pkt, clone_pool)) == NULL)) {
rte_pktmbuf_free(hdr);
/* If requested, then make a new clone packet. */
if (use_clone != 0 &&
unlikely ((pkt = rte_pktmbuf_clone(pkt, clone_pool)) == NULL)) {
rte_pktmbuf_free(hdr);
- hdr->pkt.pkt_len = (uint16_t)(hdr->pkt.data_len + pkt->pkt.pkt_len);
- hdr->pkt.nb_segs = (uint8_t)(pkt->pkt.nb_segs + 1);
+ hdr->pkt_len = (uint16_t)(hdr->data_len + pkt->pkt_len);
+ hdr->nb_segs = (uint8_t)(pkt->nb_segs + 1);
- hdr->pkt.in_port = pkt->pkt.in_port;
- hdr->pkt.vlan_macip = pkt->pkt.vlan_macip;
- hdr->pkt.hash = pkt->pkt.hash;
+ hdr->port = pkt->port;
+ hdr->vlan_tci = pkt->vlan_tci;
+ hdr->vlan_tci_outer = pkt->vlan_tci_outer;
+ hdr->tx_offload = pkt->tx_offload;
+ hdr->hash = pkt->hash;
n = strtoul(q_arg, &end, 0);
if (errno != 0 || end == NULL || *end != '\0' ||
n == 0 || n >= MAX_RX_QUEUE_PER_LCORE)
n = strtoul(q_arg, &end, 0);
if (errno != 0 || end == NULL || *end != '\0' ||
n == 0 || n >= MAX_RX_QUEUE_PER_LCORE)
- printf("%s%02X:%02X:%02X:%02X:%02X:%02X", name,
- eth_addr->addr_bytes[0],
- eth_addr->addr_bytes[1],
- eth_addr->addr_bytes[2],
- eth_addr->addr_bytes[3],
- eth_addr->addr_bytes[4],
- eth_addr->addr_bytes[5]);
+ char buf[ETHER_ADDR_FMT_SIZE];
+ ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
+ printf("%s%s", name, buf);
rte_exit(EXIT_FAILURE, "Invalid IPV4_MULTICAST parameters\n");
/* create the mbuf pools */
rte_exit(EXIT_FAILURE, "Invalid IPV4_MULTICAST parameters\n");
/* create the mbuf pools */
- packet_pool = rte_mempool_create("packet_pool", NB_PKT_MBUF,
- PKT_MBUF_SIZE, 32, sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL, rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ packet_pool = rte_pktmbuf_pool_create("packet_pool", NB_PKT_MBUF, 32,
+ 0, PKT_MBUF_DATA_SIZE, rte_socket_id());
- header_pool = rte_mempool_create("header_pool", NB_HDR_MBUF,
- HDR_MBUF_SIZE, 32, 0, NULL, NULL, rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ header_pool = rte_pktmbuf_pool_create("header_pool", NB_HDR_MBUF, 32,
+ 0, HDR_MBUF_DATA_SIZE, rte_socket_id());
- clone_pool = rte_mempool_create("clone_pool", NB_CLONE_MBUF,
- CLONE_MBUF_SIZE, 32, 0, NULL, NULL, rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ clone_pool = rte_pktmbuf_pool_create("clone_pool", NB_CLONE_MBUF, 32,
+ 0, 0, rte_socket_id());
- /* init driver */
- if (rte_pmd_init_all() < 0)
- rte_exit(EXIT_FAILURE, "Cannot init pmd\n");
-
- if (rte_eal_pci_probe() < 0)
- rte_exit(EXIT_FAILURE, "Cannot probe PCI\n");
-
nb_ports = rte_eth_dev_count();
if (nb_ports == 0)
rte_exit(EXIT_FAILURE, "No physical ports!\n");
nb_ports = rte_eth_dev_count();
if (nb_ports == 0)
rte_exit(EXIT_FAILURE, "No physical ports!\n");
printf("rxq=%hu ", queueid);
fflush(stdout);
ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
printf("rxq=%hu ", queueid);
fflush(stdout);
ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
packet_pool);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, port=%d\n",
packet_pool);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, port=%d\n",
continue;
printf("txq=%u,%hu ", lcore_id, queueid);
fflush(stdout);
continue;
printf("txq=%u,%hu ", lcore_id, queueid);
fflush(stdout);
ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, "
"port=%d\n", ret, portid);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, "
"port=%d\n", ret, portid);