- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-/* Default configuration for rx and tx thresholds etc. */
-static const struct rte_eth_rxconf rx_conf_default = {
- .rx_thresh = {
- .pthresh = 8,
- .hthresh = 8,
- .wthresh = 4,
- },
-};
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-static const struct rte_eth_txconf tx_conf_default = {
- .tx_thresh = {
- .pthresh = 36,
- .hthresh = 0,
- .wthresh = 0,
- },
- .tx_free_thresh = 0, /* Use PMD default values */
- .tx_rs_thresh = 0, /* Use PMD default values */
-};
-
.split_hdr_size = 0,
.header_split = 0, /**< Header Split disabled */
.hw_ip_checksum = 1, /**< IP checksum offload enabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
.split_hdr_size = 0,
.header_split = 0, /**< Header Split disabled */
.hw_ip_checksum = 1, /**< IP checksum offload enabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
if (retval < 0)
return retval;
retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
if (retval < 0)
return retval;
- retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
- rte_eth_dev_socket_id(port), &rx_conf_default,
+ retval = rte_eth_rx_queue_setup(port, q, nb_rxd,
+ rte_eth_dev_socket_id(port),
+ &info.default_rxconf,
- retval = rte_eth_tx_queue_setup(port, q, RX_RING_SIZE,
- rte_eth_dev_socket_id(port), &tx_conf_default);
+ retval = rte_eth_tx_queue_setup(port, q, nb_txd,
+ rte_eth_dev_socket_id(port),
+ NULL);
/* build up message in msgbuf before printing to decrease likelihood
* of multi-core message interleaving.
*/
/* build up message in msgbuf before printing to decrease likelihood
* of multi-core message interleaving.
*/
"Lcore %u using ports ", id);
for (p = start_port; p < end_port; p++){
"Lcore %u using ports ", id);
for (p = start_port; p < end_port; p++){
- uint8_t portid, count, all_ports_up, print_flag = 0;
+ uint16_t portid;
+ uint8_t count, all_ports_up, print_flag = 0;
- printf("Port %d Link Up - speed %u "
- "Mbps - %s\n", (uint8_t)portid,
- (unsigned)link.link_speed,
+ printf(
+ "Port%d Link Up. Speed %u Mbps - %s\n",
+ portid, link.link_speed,
- /* probe to determine the NIC devices available */
- proc_type = rte_eal_process_type();
- if (rte_pmd_init_all() < 0)
- rte_exit(EXIT_FAILURE, "Cannot init pmd\n");
- if (rte_eal_pci_probe() < 0)
- rte_exit(EXIT_FAILURE, "Cannot probe PCI\n");
+ /* determine the NIC devices available */
if (rte_eth_dev_count() == 0)
rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
/* parse application arguments (those after the EAL ones) */
smp_parse_args(argc, argv);
if (rte_eth_dev_count() == 0)
rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
/* parse application arguments (those after the EAL ones) */
smp_parse_args(argc, argv);
- rte_mempool_create(_SMP_MBUF_POOL, NB_MBUFS, MBUF_SIZE,
- MBUF_CACHE_SIZE, sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
+ rte_pktmbuf_pool_create(_SMP_MBUF_POOL, NB_MBUFS,
+ MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
+ rte_socket_id());