+/**
+ *
+ * Dequeue a burst of processed compression operations from a queue on the comp
+ * device. The dequeued operation are stored in *rte_comp_op* structures
+ * whose pointers are supplied in the *ops* array.
+ *
+ * The rte_compressdev_dequeue_burst() function returns the number of ops
+ * actually dequeued, which is the number of *rte_comp_op* data structures
+ * effectively supplied into the *ops* array.
+ *
+ * A return value equal to *nb_ops* indicates that the queue contained
+ * at least *nb_ops* operations, and this is likely to signify that other
+ * processed operations remain in the devices output queue. Applications
+ * implementing a "retrieve as many processed operations as possible" policy
+ * can check this specific case and keep invoking the
+ * rte_compressdev_dequeue_burst() function until a value less than
+ * *nb_ops* is returned.
+ *
+ * The rte_compressdev_dequeue_burst() function does not provide any error
+ * notification to avoid the corresponding overhead.
+ *
+ * @note: operation ordering is not maintained within the queue pair.
+ *
+ * @note: In case op status = OUT_OF_SPACE_TERMINATED, op.consumed=0 and the
+ * op must be resubmitted with the same input data and a larger output buffer.
+ * op.produced is usually 0, but in decompression cases a PMD may return > 0
+ * and the application may find it useful to inspect that data.
+ * This status is only returned on STATELESS ops.
+ *
+ * @note: In case op status = OUT_OF_SPACE_RECOVERABLE, op.produced can be used
+ * and next op in stream should continue on from op.consumed+1 with a fresh
+ * output buffer.
+ * Consumed=0, produced=0 is an unusual but allowed case. There may be useful
+ * state/history stored in the PMD, even though no output was produced yet.
+ *
+ *
+ * @param dev_id
+ * Compress device identifier
+ * @param qp_id
+ * The index of the queue pair from which to retrieve
+ * processed operations. The value must be in the range
+ * [0, nb_queue_pair - 1] previously supplied to
+ * rte_compressdev_configure()
+ * @param ops
+ * The address of an array of pointers to
+ * *rte_comp_op* structures that must be
+ * large enough to store *nb_ops* pointers in it
+ * @param nb_ops
+ * The maximum number of operations to dequeue
+ * @return
+ * - The number of operations actually dequeued, which is the number
+ * of pointers to *rte_comp_op* structures effectively supplied to the
+ * *ops* array.
+ */
+uint16_t __rte_experimental
+rte_compressdev_dequeue_burst(uint8_t dev_id, uint16_t qp_id,
+ struct rte_comp_op **ops, uint16_t nb_ops);
+
+/**
+ * Enqueue a burst of operations for processing on a compression device.
+ *
+ * The rte_compressdev_enqueue_burst() function is invoked to place
+ * comp operations on the queue *qp_id* of the device designated by
+ * its *dev_id*.
+ *
+ * The *nb_ops* parameter is the number of operations to process which are
+ * supplied in the *ops* array of *rte_comp_op* structures.
+ *
+ * The rte_compressdev_enqueue_burst() function returns the number of
+ * operations it actually enqueued for processing. A return value equal to
+ * *nb_ops* means that all packets have been enqueued.
+ *
+ * @note All compression operations are Out-of-place (OOP) operations,
+ * as the size of the output data is different to the size of the input data.
+ *
+ * @note The rte_comp_op contains both input and output parameters and is the
+ * vehicle for the application to pass data into and out of the PMD. While an
+ * op is inflight, i.e. once it has been enqueued, the private_xform or stream
+ * attached to it and any mbufs or memory referenced by it should not be altered
+ * or freed by the application. The PMD may use or change some of this data at
+ * any time until it has been returned in a dequeue operation.
+ *
+ * @note The flush flag only applies to operations which return SUCCESS.
+ * In OUT_OF_SPACE cases whether STATEFUL or STATELESS, data in dest buffer
+ * is as if flush flag was FLUSH_NONE.
+ * @note flush flag only applies in compression direction. It has no meaning
+ * for decompression.
+ * @note: operation ordering is not maintained within the queue pair.
+ *
+ * @param dev_id
+ * Compress device identifier
+ * @param qp_id
+ * The index of the queue pair on which operations
+ * are to be enqueued for processing. The value
+ * must be in the range [0, nb_queue_pairs - 1]
+ * previously supplied to *rte_compressdev_configure*
+ * @param ops
+ * The address of an array of *nb_ops* pointers
+ * to *rte_comp_op* structures which contain
+ * the operations to be processed
+ * @param nb_ops
+ * The number of operations to process
+ * @return
+ * The number of operations actually enqueued on the device. The return
+ * value can be less than the value of the *nb_ops* parameter when the
+ * comp devices queue is full or if invalid parameters are specified in
+ * a *rte_comp_op*.
+ */
+uint16_t __rte_experimental
+rte_compressdev_enqueue_burst(uint8_t dev_id, uint16_t qp_id,
+ struct rte_comp_op **ops, uint16_t nb_ops);
+
+/**
+ * This should alloc a stream from the device's mempool and initialise it.
+ * The application should call this API when setting up for the stateful
+ * processing of a set of data on a device. The API can be called multiple
+ * times to set up a stream for each data set. The handle returned is only for
+ * use with ops of op_type STATEFUL and must be passed to the PMD
+ * with every op in the data stream
+ *
+ * @param dev_id
+ * Compress device identifier
+ * @param xform
+ * xform data
+ * @param stream
+ * Pointer to where PMD's private stream handle should be stored
+ *
+ * @return
+ * - 0 if successful and valid stream handle
+ * - <0 in error cases
+ * - Returns -EINVAL if input parameters are invalid.
+ * - Returns -ENOTSUP if comp device does not support STATEFUL operations.
+ * - Returns -ENOTSUP if comp device does not support the comp transform.
+ * - Returns -ENOMEM if the private stream could not be allocated.
+ *
+ */
+int __rte_experimental
+rte_compressdev_stream_create(uint8_t dev_id,
+ const struct rte_comp_xform *xform,
+ void **stream);
+
+/**
+ * This should clear the stream and return it to the device's mempool.
+ *
+ * @param dev_id
+ * Compress device identifier
+ *
+ * @param stream
+ * PMD's private stream data
+ *
+ * @return
+ * - 0 if successful
+ * - <0 in error cases
+ * - Returns -EINVAL if input parameters are invalid.
+ * - Returns -ENOTSUP if comp device does not support STATEFUL operations.
+ * - Returns -EBUSY if can't free stream as there are inflight operations
+ */
+int __rte_experimental
+rte_compressdev_stream_free(uint8_t dev_id, void *stream);
+
+/**
+ * This should alloc a private_xform from the device's mempool and initialise
+ * it. The application should call this API when setting up for stateless
+ * processing on a device. If it returns non-shareable, then the appl cannot
+ * share this handle with multiple in-flight ops and should call this API again
+ * to get a separate handle for every in-flight op.
+ * The handle returned is only valid for use with ops of op_type STATELESS.
+ *
+ * @param dev_id
+ * Compress device identifier
+ * @param xform
+ * xform data
+ * @param private_xform
+ * Pointer to where PMD's private_xform handle should be stored
+ *
+ * @return
+ * - if successful returns 0
+ * and valid private_xform handle
+ * - <0 in error cases
+ * - Returns -EINVAL if input parameters are invalid.
+ * - Returns -ENOTSUP if comp device does not support the comp transform.
+ * - Returns -ENOMEM if the private_xform could not be allocated.
+ */
+int __rte_experimental
+rte_compressdev_private_xform_create(uint8_t dev_id,
+ const struct rte_comp_xform *xform,
+ void **private_xform);
+
+/**
+ * This should clear the private_xform and return it to the device's mempool.
+ * It is the application's responsibility to ensure that private_xform data
+ * is not cleared while there are still in-flight operations using it.
+ *
+ * @param dev_id
+ * Compress device identifier
+ *
+ * @param private_xform
+ * PMD's private_xform data
+ *
+ * @return
+ * - 0 if successful
+ * - <0 in error cases
+ * - Returns -EINVAL if input parameters are invalid.
+ */
+int __rte_experimental
+rte_compressdev_private_xform_free(uint8_t dev_id, void *private_xform);
+