+ uint32_t tenant_id; /**< Tenant ID to match. VNI, GRE key... */
+ uint16_t queue_id; /**< Queue assigned to if match. */
+};
+
+/**
+ * Global eth device configuration type.
+ */
+enum rte_eth_global_cfg_type {
+ RTE_ETH_GLOBAL_CFG_TYPE_UNKNOWN = 0,
+ RTE_ETH_GLOBAL_CFG_TYPE_GRE_KEY_LEN,
+ RTE_ETH_GLOBAL_CFG_TYPE_MAX,
+};
+
+/**
+ * Global eth device configuration.
+ */
+struct rte_eth_global_cfg {
+ enum rte_eth_global_cfg_type cfg_type; /**< Global config type. */
+ union {
+ uint8_t gre_key_len; /**< Valid GRE key length in byte. */
+ uint64_t reserved; /**< Reserve space for future use. */
+ } cfg;
+};
+
+#define RTE_ETH_FDIR_MAX_FLEXLEN 16 /**< Max length of flexbytes. */
+#define RTE_ETH_INSET_SIZE_MAX 128 /**< Max length of input set. */
+
+/**
+ * Input set fields for Flow Director and Hash filters
+ */
+enum rte_eth_input_set_field {
+ RTE_ETH_INPUT_SET_UNKNOWN = 0,
+
+ /* L2 */
+ RTE_ETH_INPUT_SET_L2_SRC_MAC = 1,
+ RTE_ETH_INPUT_SET_L2_DST_MAC,
+ RTE_ETH_INPUT_SET_L2_OUTER_VLAN,
+ RTE_ETH_INPUT_SET_L2_INNER_VLAN,
+ RTE_ETH_INPUT_SET_L2_ETHERTYPE,
+
+ /* L3 */
+ RTE_ETH_INPUT_SET_L3_SRC_IP4 = 129,
+ RTE_ETH_INPUT_SET_L3_DST_IP4,
+ RTE_ETH_INPUT_SET_L3_SRC_IP6,
+ RTE_ETH_INPUT_SET_L3_DST_IP6,
+ RTE_ETH_INPUT_SET_L3_IP4_TOS,
+ RTE_ETH_INPUT_SET_L3_IP4_PROTO,
+ RTE_ETH_INPUT_SET_L3_IP6_TC,
+ RTE_ETH_INPUT_SET_L3_IP6_NEXT_HEADER,
+ RTE_ETH_INPUT_SET_L3_IP4_TTL,
+ RTE_ETH_INPUT_SET_L3_IP6_HOP_LIMITS,
+
+ /* L4 */
+ RTE_ETH_INPUT_SET_L4_UDP_SRC_PORT = 257,
+ RTE_ETH_INPUT_SET_L4_UDP_DST_PORT,
+ RTE_ETH_INPUT_SET_L4_TCP_SRC_PORT,
+ RTE_ETH_INPUT_SET_L4_TCP_DST_PORT,
+ RTE_ETH_INPUT_SET_L4_SCTP_SRC_PORT,
+ RTE_ETH_INPUT_SET_L4_SCTP_DST_PORT,
+ RTE_ETH_INPUT_SET_L4_SCTP_VERIFICATION_TAG,
+
+ /* Tunnel */
+ RTE_ETH_INPUT_SET_TUNNEL_L2_INNER_DST_MAC = 385,
+ RTE_ETH_INPUT_SET_TUNNEL_L2_INNER_SRC_MAC,
+ RTE_ETH_INPUT_SET_TUNNEL_L2_INNER_VLAN,
+ RTE_ETH_INPUT_SET_TUNNEL_L4_UDP_KEY,
+ RTE_ETH_INPUT_SET_TUNNEL_GRE_KEY,
+
+ /* Flexible Payload */
+ RTE_ETH_INPUT_SET_FLEX_PAYLOAD_1ST_WORD = 641,
+ RTE_ETH_INPUT_SET_FLEX_PAYLOAD_2ND_WORD,
+ RTE_ETH_INPUT_SET_FLEX_PAYLOAD_3RD_WORD,
+ RTE_ETH_INPUT_SET_FLEX_PAYLOAD_4TH_WORD,
+ RTE_ETH_INPUT_SET_FLEX_PAYLOAD_5TH_WORD,
+ RTE_ETH_INPUT_SET_FLEX_PAYLOAD_6TH_WORD,
+ RTE_ETH_INPUT_SET_FLEX_PAYLOAD_7TH_WORD,
+ RTE_ETH_INPUT_SET_FLEX_PAYLOAD_8TH_WORD,
+
+ RTE_ETH_INPUT_SET_DEFAULT = 65533,
+ RTE_ETH_INPUT_SET_NONE = 65534,
+ RTE_ETH_INPUT_SET_MAX = 65535,
+};
+
+/**
+ * Filters input set operations
+ */
+enum rte_filter_input_set_op {
+ RTE_ETH_INPUT_SET_OP_UNKNOWN,
+ RTE_ETH_INPUT_SET_SELECT, /**< select input set */
+ RTE_ETH_INPUT_SET_ADD, /**< add input set entry */
+ RTE_ETH_INPUT_SET_OP_MAX
+};
+
+
+/**
+ * A structure used to define the input set configuration for
+ * flow director and hash filters
+ */
+struct rte_eth_input_set_conf {
+ uint16_t flow_type;
+ uint16_t inset_size;
+ enum rte_eth_input_set_field field[RTE_ETH_INSET_SIZE_MAX];
+ enum rte_filter_input_set_op op;
+};
+
+/**
+ * A structure used to define the input for L2 flow
+ */
+struct rte_eth_l2_flow {
+ uint16_t ether_type; /**< Ether type in big endian */
+};
+
+/**
+ * A structure used to define the input for IPV4 flow
+ */
+struct rte_eth_ipv4_flow {
+ uint32_t src_ip; /**< IPv4 source address in big endian. */
+ uint32_t dst_ip; /**< IPv4 destination address in big endian. */
+ uint8_t tos; /**< Type of service to match. */
+ uint8_t ttl; /**< Time to live to match. */
+ uint8_t proto; /**< Protocol, next header in big endian. */
+};
+
+/**
+ * A structure used to define the input for IPV4 UDP flow
+ */
+struct rte_eth_udpv4_flow {
+ struct rte_eth_ipv4_flow ip; /**< IPv4 fields to match. */
+ uint16_t src_port; /**< UDP source port in big endian. */
+ uint16_t dst_port; /**< UDP destination port in big endian. */
+};
+
+/**
+ * A structure used to define the input for IPV4 TCP flow
+ */
+struct rte_eth_tcpv4_flow {
+ struct rte_eth_ipv4_flow ip; /**< IPv4 fields to match. */
+ uint16_t src_port; /**< TCP source port in big endian. */
+ uint16_t dst_port; /**< TCP destination port in big endian. */
+};
+
+/**
+ * A structure used to define the input for IPV4 SCTP flow
+ */
+struct rte_eth_sctpv4_flow {
+ struct rte_eth_ipv4_flow ip; /**< IPv4 fields to match. */
+ uint16_t src_port; /**< SCTP source port in big endian. */
+ uint16_t dst_port; /**< SCTP destination port in big endian. */
+ uint32_t verify_tag; /**< Verify tag in big endian */
+};
+
+/**
+ * A structure used to define the input for IPV6 flow
+ */
+struct rte_eth_ipv6_flow {
+ uint32_t src_ip[4]; /**< IPv6 source address in big endian. */
+ uint32_t dst_ip[4]; /**< IPv6 destination address in big endian. */
+ uint8_t tc; /**< Traffic class to match. */
+ uint8_t proto; /**< Protocol, next header to match. */
+ uint8_t hop_limits; /**< Hop limits to match. */
+};
+
+/**
+ * A structure used to define the input for IPV6 UDP flow
+ */
+struct rte_eth_udpv6_flow {
+ struct rte_eth_ipv6_flow ip; /**< IPv6 fields to match. */
+ uint16_t src_port; /**< UDP source port in big endian. */
+ uint16_t dst_port; /**< UDP destination port in big endian. */
+};
+
+/**
+ * A structure used to define the input for IPV6 TCP flow
+ */
+struct rte_eth_tcpv6_flow {
+ struct rte_eth_ipv6_flow ip; /**< IPv6 fields to match. */
+ uint16_t src_port; /**< TCP source port to in big endian. */
+ uint16_t dst_port; /**< TCP destination port in big endian. */
+};
+
+/**
+ * A structure used to define the input for IPV6 SCTP flow
+ */
+struct rte_eth_sctpv6_flow {
+ struct rte_eth_ipv6_flow ip; /**< IPv6 fields to match. */
+ uint16_t src_port; /**< SCTP source port in big endian. */
+ uint16_t dst_port; /**< SCTP destination port in big endian. */
+ uint32_t verify_tag; /**< Verify tag in big endian. */
+};
+
+/**
+ * A structure used to define the input for MAC VLAN flow
+ */
+struct rte_eth_mac_vlan_flow {
+ struct ether_addr mac_addr; /**< Mac address to match. */
+};
+
+/**
+ * Tunnel type for flow director.
+ */
+enum rte_eth_fdir_tunnel_type {
+ RTE_FDIR_TUNNEL_TYPE_UNKNOWN = 0,
+ RTE_FDIR_TUNNEL_TYPE_NVGRE,
+ RTE_FDIR_TUNNEL_TYPE_VXLAN,
+};
+
+/**
+ * A structure used to define the input for tunnel flow, now it's VxLAN or
+ * NVGRE
+ */
+struct rte_eth_tunnel_flow {
+ enum rte_eth_fdir_tunnel_type tunnel_type; /**< Tunnel type to match. */
+ /** Tunnel ID to match. TNI, VNI... in big endian. */
+ uint32_t tunnel_id;
+ struct ether_addr mac_addr; /**< Mac address to match. */
+};
+
+/**
+ * An union contains the inputs for all types of flow
+ * Items in flows need to be in big endian
+ */
+union rte_eth_fdir_flow {
+ struct rte_eth_l2_flow l2_flow;
+ struct rte_eth_udpv4_flow udp4_flow;
+ struct rte_eth_tcpv4_flow tcp4_flow;
+ struct rte_eth_sctpv4_flow sctp4_flow;
+ struct rte_eth_ipv4_flow ip4_flow;
+ struct rte_eth_udpv6_flow udp6_flow;
+ struct rte_eth_tcpv6_flow tcp6_flow;
+ struct rte_eth_sctpv6_flow sctp6_flow;
+ struct rte_eth_ipv6_flow ipv6_flow;
+ struct rte_eth_mac_vlan_flow mac_vlan_flow;
+ struct rte_eth_tunnel_flow tunnel_flow;
+};
+
+/**
+ * A structure used to contain extend input of flow
+ */
+struct rte_eth_fdir_flow_ext {
+ uint16_t vlan_tci;
+ uint8_t flexbytes[RTE_ETH_FDIR_MAX_FLEXLEN];
+ /**< It is filled by the flexible payload to match. */
+ uint8_t is_vf; /**< 1 for VF, 0 for port dev */
+ uint16_t dst_id; /**< VF ID, available when is_vf is 1*/
+};
+
+/**
+ * A structure used to define the input for a flow director filter entry
+ */
+struct rte_eth_fdir_input {
+ uint16_t flow_type;
+ union rte_eth_fdir_flow flow;
+ /**< Flow fields to match, dependent on flow_type */
+ struct rte_eth_fdir_flow_ext flow_ext;
+ /**< Additional fields to match */
+};
+
+/**
+ * Behavior will be taken if FDIR match
+ */
+enum rte_eth_fdir_behavior {
+ RTE_ETH_FDIR_ACCEPT = 0,
+ RTE_ETH_FDIR_REJECT,
+ RTE_ETH_FDIR_PASSTHRU,
+};
+
+/**
+ * Flow director report status
+ * It defines what will be reported if FDIR entry is matched.
+ */
+enum rte_eth_fdir_status {
+ RTE_ETH_FDIR_NO_REPORT_STATUS = 0, /**< Report nothing. */
+ RTE_ETH_FDIR_REPORT_ID, /**< Only report FD ID. */
+ RTE_ETH_FDIR_REPORT_ID_FLEX_4, /**< Report FD ID and 4 flex bytes. */
+ RTE_ETH_FDIR_REPORT_FLEX_8, /**< Report 8 flex bytes. */
+};
+
+/**
+ * A structure used to define an action when match FDIR packet filter.
+ */
+struct rte_eth_fdir_action {
+ uint16_t rx_queue; /**< Queue assigned to if FDIR match. */
+ enum rte_eth_fdir_behavior behavior; /**< Behavior will be taken */
+ enum rte_eth_fdir_status report_status; /**< Status report option */
+ uint8_t flex_off;
+ /**< If report_status is RTE_ETH_FDIR_REPORT_ID_FLEX_4 or
+ RTE_ETH_FDIR_REPORT_FLEX_8, flex_off specifies where the reported
+ flex bytes start from in flexible payload. */
+};
+
+/**
+ * A structure used to define the flow director filter entry by filter_ctrl API
+ * It supports RTE_ETH_FILTER_FDIR with RTE_ETH_FILTER_ADD and
+ * RTE_ETH_FILTER_DELETE operations.
+ */
+struct rte_eth_fdir_filter {
+ uint32_t soft_id;
+ /**< ID, an unique value is required when deal with FDIR entry */
+ struct rte_eth_fdir_input input; /**< Input set */
+ struct rte_eth_fdir_action action; /**< Action taken when match */
+};
+
+/**
+ * A structure used to configure FDIR masks that are used by the device
+ * to match the various fields of RX packet headers.
+ */
+struct rte_eth_fdir_masks {
+ uint16_t vlan_tci_mask; /**< Bit mask for vlan_tci in big endian */
+ /** Bit mask for ipv4 flow in big endian. */
+ struct rte_eth_ipv4_flow ipv4_mask;
+ /** Bit maks for ipv6 flow in big endian. */
+ struct rte_eth_ipv6_flow ipv6_mask;
+ /** Bit mask for L4 source port in big endian. */
+ uint16_t src_port_mask;
+ /** Bit mask for L4 destination port in big endian. */
+ uint16_t dst_port_mask;
+ /** 6 bit mask for proper 6 bytes of Mac address, bit 0 matches the
+ first byte on the wire */
+ uint8_t mac_addr_byte_mask;
+ /** Bit mask for tunnel ID in big endian. */
+ uint32_t tunnel_id_mask;
+ uint8_t tunnel_type_mask; /**< 1 - Match tunnel type,
+ 0 - Ignore tunnel type. */
+};
+
+/**
+ * Payload type
+ */
+enum rte_eth_payload_type {
+ RTE_ETH_PAYLOAD_UNKNOWN = 0,
+ RTE_ETH_RAW_PAYLOAD,
+ RTE_ETH_L2_PAYLOAD,
+ RTE_ETH_L3_PAYLOAD,
+ RTE_ETH_L4_PAYLOAD,
+ RTE_ETH_PAYLOAD_MAX = 8,
+};
+
+/**
+ * A structure used to select bytes extracted from the protocol layers to
+ * flexible payload for filter
+ */
+struct rte_eth_flex_payload_cfg {
+ enum rte_eth_payload_type type; /**< Payload type */
+ uint16_t src_offset[RTE_ETH_FDIR_MAX_FLEXLEN];
+ /**< Offset in bytes from the beginning of packet's payload
+ src_offset[i] indicates the flexbyte i's offset in original
+ packet payload. This value should be less than
+ flex_payload_limit in struct rte_eth_fdir_info.*/
+};
+
+/**
+ * A structure used to define FDIR masks for flexible payload
+ * for each flow type
+ */
+struct rte_eth_fdir_flex_mask {
+ uint16_t flow_type;
+ uint8_t mask[RTE_ETH_FDIR_MAX_FLEXLEN];
+ /**< Mask for the whole flexible payload */
+};
+
+/**
+ * A structure used to define all flexible payload related setting
+ * include flex payload and flex mask
+ */
+struct rte_eth_fdir_flex_conf {
+ uint16_t nb_payloads; /**< The number of following payload cfg */
+ uint16_t nb_flexmasks; /**< The number of following mask */
+ struct rte_eth_flex_payload_cfg flex_set[RTE_ETH_PAYLOAD_MAX];
+ /**< Flex payload configuration for each payload type */
+ struct rte_eth_fdir_flex_mask flex_mask[RTE_ETH_FLOW_MAX];
+ /**< Flex mask configuration for each flow type */
+};
+
+/**
+ * Flow Director setting modes: none, signature or perfect.
+ */
+enum rte_fdir_mode {
+ RTE_FDIR_MODE_NONE = 0, /**< Disable FDIR support. */
+ RTE_FDIR_MODE_SIGNATURE, /**< Enable FDIR signature filter mode. */
+ RTE_FDIR_MODE_PERFECT, /**< Enable FDIR perfect filter mode. */
+ RTE_FDIR_MODE_PERFECT_MAC_VLAN, /**< Enable FDIR filter mode - MAC VLAN. */
+ RTE_FDIR_MODE_PERFECT_TUNNEL, /**< Enable FDIR filter mode - tunnel. */
+};
+
+#define UINT32_BIT (CHAR_BIT * sizeof(uint32_t))
+#define RTE_FLOW_MASK_ARRAY_SIZE \
+ (RTE_ALIGN(RTE_ETH_FLOW_MAX, UINT32_BIT)/UINT32_BIT)
+
+/**
+ * A structure used to get the information of flow director filter.
+ * It supports RTE_ETH_FILTER_FDIR with RTE_ETH_FILTER_INFO operation.
+ * It includes the mode, flexible payload configuration information,
+ * capabilities and supported flow types, flexible payload characters.
+ * It can be gotten to help taking specific configurations per device.
+ */
+struct rte_eth_fdir_info {
+ enum rte_fdir_mode mode; /**< Flow director mode */
+ struct rte_eth_fdir_masks mask;
+ /** Flex payload configuration information */
+ struct rte_eth_fdir_flex_conf flex_conf;
+ uint32_t guarant_spc; /**< Guaranteed spaces.*/
+ uint32_t best_spc; /**< Best effort spaces.*/
+ /** Bit mask for every supported flow type. */
+ uint32_t flow_types_mask[RTE_FLOW_MASK_ARRAY_SIZE];
+ uint32_t max_flexpayload; /**< Total flex payload in bytes. */
+ /** Flexible payload unit in bytes. Size and alignments of all flex
+ payload segments should be multiplies of this value. */
+ uint32_t flex_payload_unit;
+ /** Max number of flexible payload continuous segments.
+ Each segment should be a multiple of flex_payload_unit.*/
+ uint32_t max_flex_payload_segment_num;
+ /** Maximum src_offset in bytes allowed. It indicates that
+ src_offset[i] in struct rte_eth_flex_payload_cfg should be less
+ than this value. */
+ uint16_t flex_payload_limit;
+ /** Flex bitmask unit in bytes. Size of flex bitmasks should be a
+ multiply of this value. */
+ uint32_t flex_bitmask_unit;
+ /** Max supported size of flex bitmasks in flex_bitmask_unit */
+ uint32_t max_flex_bitmask_num;
+};
+
+/**
+ * A structure used to define the statistics of flow director.
+ * It supports RTE_ETH_FILTER_FDIR with RTE_ETH_FILTER_STATS operation.
+ */
+struct rte_eth_fdir_stats {
+ uint32_t collision; /**< Number of filters with collision. */
+ uint32_t free; /**< Number of free filters. */
+ uint32_t maxhash;
+ /**< The lookup hash value of the added filter that updated the value
+ of the MAXLEN field */
+ uint32_t maxlen; /**< Longest linked list of filters. */
+ uint64_t add; /**< Number of added filters. */
+ uint64_t remove; /**< Number of removed filters. */
+ uint64_t f_add; /**< Number of failed added filters. */
+ uint64_t f_remove; /**< Number of failed removed filters. */
+ uint32_t guarant_cnt; /**< Number of filters in guaranteed spaces. */
+ uint32_t best_cnt; /**< Number of filters in best effort spaces. */
+};
+
+/**
+ * Flow Director filter information types.
+ */
+enum rte_eth_fdir_filter_info_type {
+ RTE_ETH_FDIR_FILTER_INFO_TYPE_UNKNOWN = 0,
+ /** Flow Director filter input set configuration */
+ RTE_ETH_FDIR_FILTER_INPUT_SET_SELECT,
+ RTE_ETH_FDIR_FILTER_INFO_TYPE_MAX,
+};
+
+/**
+ * A structure used to set FDIR filter information, to support filter type
+ * of 'RTE_ETH_FILTER_FDIR' RTE_ETH_FDIR_FILTER_INPUT_SET_SELECT operation.
+ */
+struct rte_eth_fdir_filter_info {
+ enum rte_eth_fdir_filter_info_type info_type; /**< Information type */
+ /** Details of fdir filter information */
+ union {
+ /** Flow Director input set configuration per port */
+ struct rte_eth_input_set_conf input_set_conf;
+ } info;
+};
+
+/**
+ * Hash filter information types.
+ * - RTE_ETH_HASH_FILTER_SYM_HASH_ENA_PER_PORT is for getting/setting the
+ * information/configuration of 'symmetric hash enable' per port.
+ * - RTE_ETH_HASH_FILTER_GLOBAL_CONFIG is for getting/setting the global
+ * configurations of hash filters. Those global configurations are valid
+ * for all ports of the same NIC.
+ * - RTE_ETH_HASH_FILTER_INPUT_SET_SELECT is for setting the global
+ * hash input set fields
+ */
+enum rte_eth_hash_filter_info_type {
+ RTE_ETH_HASH_FILTER_INFO_TYPE_UNKNOWN = 0,
+ /** Symmetric hash enable per port */
+ RTE_ETH_HASH_FILTER_SYM_HASH_ENA_PER_PORT,
+ /** Configure globally for hash filter */
+ RTE_ETH_HASH_FILTER_GLOBAL_CONFIG,
+ /** Global Hash filter input set configuration */
+ RTE_ETH_HASH_FILTER_INPUT_SET_SELECT,
+ RTE_ETH_HASH_FILTER_INFO_TYPE_MAX,
+};
+
+/**
+ * Hash function types.
+ */
+enum rte_eth_hash_function {
+ RTE_ETH_HASH_FUNCTION_DEFAULT = 0,
+ RTE_ETH_HASH_FUNCTION_TOEPLITZ, /**< Toeplitz */
+ RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, /**< Simple XOR */
+ RTE_ETH_HASH_FUNCTION_MAX,
+};
+
+#define RTE_SYM_HASH_MASK_ARRAY_SIZE \
+ (RTE_ALIGN(RTE_ETH_FLOW_MAX, UINT32_BIT)/UINT32_BIT)
+/**
+ * A structure used to set or get global hash function configurations which
+ * include symmetric hash enable per flow type and hash function type.
+ * Each bit in sym_hash_enable_mask[] indicates if the symmetric hash of the
+ * corresponding flow type is enabled or not.
+ * Each bit in valid_bit_mask[] indicates if the corresponding bit in
+ * sym_hash_enable_mask[] is valid or not. For the configurations gotten, it
+ * also means if the flow type is supported by hardware or not.
+ */
+struct rte_eth_hash_global_conf {
+ enum rte_eth_hash_function hash_func; /**< Hash function type */
+ /** Bit mask for symmetric hash enable per flow type */
+ uint32_t sym_hash_enable_mask[RTE_SYM_HASH_MASK_ARRAY_SIZE];
+ /** Bit mask indicates if the corresponding bit is valid */
+ uint32_t valid_bit_mask[RTE_SYM_HASH_MASK_ARRAY_SIZE];
+};
+
+/**
+ * A structure used to set or get hash filter information, to support filter
+ * type of 'RTE_ETH_FILTER_HASH' and its operations.
+ */
+struct rte_eth_hash_filter_info {
+ enum rte_eth_hash_filter_info_type info_type; /**< Information type */
+ /** Details of hash filter information */
+ union {
+ /** For RTE_ETH_HASH_FILTER_SYM_HASH_ENA_PER_PORT */
+ uint8_t enable;
+ /** Global configurations of hash filter */
+ struct rte_eth_hash_global_conf global_conf;
+ /** Global configurations of hash filter input set */
+ struct rte_eth_input_set_conf input_set_conf;
+ } info;
+};
+
+/**
+ * l2 tunnel configuration.
+ */
+struct rte_eth_l2_tunnel_conf {
+ enum rte_eth_tunnel_type l2_tunnel_type;
+ uint16_t ether_type; /* ether type in l2 header */
+ uint32_t tunnel_id; /* port tag id for e-tag */
+ uint16_t vf_id; /* VF id for tag insertion */
+ uint32_t pool; /* destination pool for tag based forwarding */