+/**
+ * TCP segmentation offload. To enable this offload feature for a
+ * packet to be transmitted on hardware supporting TSO:
+ * - set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies
+ * PKT_TX_TCP_CKSUM)
+ * - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
+ * - if it's IPv4, set the PKT_TX_IP_CKSUM flag and write the IP checksum
+ * to 0 in the packet
+ * - fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
+ * - calculate the pseudo header checksum without taking ip_len in account,
+ * and set it in the TCP header. Refer to rte_ipv4_phdr_cksum() and
+ * rte_ipv6_phdr_cksum() that can be used as helpers.
+ */
+#define PKT_TX_TCP_SEG (1ULL << 50)
+
+#define PKT_TX_IEEE1588_TMST (1ULL << 51) /**< TX IEEE1588 packet to timestamp. */
+
+/**
+ * Bits 52+53 used for L4 packet type with checksum enabled: 00: Reserved,
+ * 01: TCP checksum, 10: SCTP checksum, 11: UDP checksum. To use hardware
+ * L4 checksum offload, the user needs to:
+ * - fill l2_len and l3_len in mbuf
+ * - set the flags PKT_TX_TCP_CKSUM, PKT_TX_SCTP_CKSUM or PKT_TX_UDP_CKSUM
+ * - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
+ * - calculate the pseudo header checksum and set it in the L4 header (only
+ * for TCP or UDP). See rte_ipv4_phdr_cksum() and rte_ipv6_phdr_cksum().
+ * For SCTP, set the crc field to 0.
+ */
+#define PKT_TX_L4_NO_CKSUM (0ULL << 52) /**< Disable L4 cksum of TX pkt. */
+#define PKT_TX_TCP_CKSUM (1ULL << 52) /**< TCP cksum of TX pkt. computed by NIC. */
+#define PKT_TX_SCTP_CKSUM (2ULL << 52) /**< SCTP cksum of TX pkt. computed by NIC. */
+#define PKT_TX_UDP_CKSUM (3ULL << 52) /**< UDP cksum of TX pkt. computed by NIC. */
+#define PKT_TX_L4_MASK (3ULL << 52) /**< Mask for L4 cksum offload request. */
+
+/**
+ * Offload the IP checksum in the hardware. The flag PKT_TX_IPV4 should
+ * also be set by the application, although a PMD will only check
+ * PKT_TX_IP_CKSUM.
+ * - set the IP checksum field in the packet to 0
+ * - fill the mbuf offload information: l2_len, l3_len
+ */
+#define PKT_TX_IP_CKSUM (1ULL << 54)
+
+/**
+ * Packet is IPv4. This flag must be set when using any offload feature
+ * (TSO, L3 or L4 checksum) to tell the NIC that the packet is an IPv4
+ * packet. If the packet is a tunneled packet, this flag is related to
+ * the inner headers.
+ */
+#define PKT_TX_IPV4 (1ULL << 55)
+
+/**
+ * Packet is IPv6. This flag must be set when using an offload feature
+ * (TSO or L4 checksum) to tell the NIC that the packet is an IPv6
+ * packet. If the packet is a tunneled packet, this flag is related to
+ * the inner headers.
+ */
+#define PKT_TX_IPV6 (1ULL << 56)
+
+#define PKT_TX_VLAN_PKT (1ULL << 57) /**< TX packet is a 802.1q VLAN packet. */
+
+/**
+ * Offload the IP checksum of an external header in the hardware. The
+ * flag PKT_TX_OUTER_IPV4 should also be set by the application, alto ugh
+ * a PMD will only check PKT_TX_IP_CKSUM. The IP checksum field in the
+ * packet must be set to 0.
+ * - set the outer IP checksum field in the packet to 0
+ * - fill the mbuf offload information: outer_l2_len, outer_l3_len