test/ipsec: add SAD autotests
[dpdk.git] / app / test / meson.build
index cb3de71..d066e49 100644 (file)
@@ -30,6 +30,7 @@ test_sources = files('commands.c',
        'test_cryptodev.c',
        'test_cryptodev_asym.c',
        'test_cryptodev_blockcipher.c',
+       'test_cryptodev_security_pdcp.c',
        'test_cycles.c',
        'test_debug.c',
        'test_distributor.c',
@@ -57,6 +58,7 @@ test_sources = files('commands.c',
        'test_hash_readwrite_lf.c',
        'test_interrupts.c',
        'test_ipsec.c',
+       'test_ipsec_sad.c',
        'test_kni.c',
        'test_kvargs.c',
        'test_latencystats.c',
@@ -80,6 +82,7 @@ test_sources = files('commands.c',
        'test_memzone.c',
        'test_meter.c',
        'test_metrics.c',
+       'test_mcslock.c',
        'test_mp_secondary.c',
        'test_pdump.c',
        'test_per_lcore.c',
@@ -87,9 +90,11 @@ test_sources = files('commands.c',
        'test_pmd_ring.c',
        'test_pmd_ring_perf.c',
        'test_power.c',
-       'test_power_acpi_cpufreq.c',
+       'test_power_cpufreq.c',
        'test_power_kvm_vm.c',
        'test_prefetch.c',
+       'test_rand_perf.c',
+       'test_rawdev.c',
        'test_rcu_qsbr.c',
        'test_rcu_qsbr_perf.c',
        'test_reciprocal_division.c',
@@ -141,6 +146,7 @@ test_deps = ['acl',
        'metrics',
        'pipeline',
        'port',
+       'rawdev',
        'rcu',
        'reorder',
        'ring',
@@ -148,8 +154,7 @@ test_deps = ['acl',
        'timer'
 ]
 
-# All test cases in fast_parallel_test_names list are parallel
-fast_parallel_test_names = [
+fast_test_names = [
         'acl_autotest',
         'alarm_autotest',
         'atomic_autotest',
@@ -159,7 +164,18 @@ fast_parallel_test_names = [
         'cpuflags_autotest',
         'cycles_autotest',
         'debug_autotest',
-        'eal_flags_autotest',
+        'eal_flags_c_opt_autotest',
+        'eal_flags_master_opt_autotest',
+        'eal_flags_n_opt_autotest',
+        'eal_flags_hpet_autotest',
+        'eal_flags_no_huge_autotest',
+        'eal_flags_w_opt_autotest',
+        'eal_flags_b_opt_autotest',
+        'eal_flags_vdev_opt_autotest',
+        'eal_flags_r_opt_autotest',
+        'eal_flags_mem_autotest',
+        'eal_flags_file_prefix_autotest',
+        'eal_flags_misc_autotest',
         'eal_fs_autotest',
         'errno_autotest',
         'event_ring_autotest',
@@ -172,6 +188,7 @@ fast_parallel_test_names = [
         'lpm6_autotest',
         'malloc_autotest',
         'mbuf_autotest',
+        'mcslock_autotest',
         'memcpy_autotest',
         'memory_autotest',
         'mempool_autotest',
@@ -184,32 +201,28 @@ fast_parallel_test_names = [
         'red_autotest',
         'ring_autotest',
         'ring_pmd_autotest',
-        'rwlock_autotest',
+        'rwlock_test1_autotest',
+        'rwlock_rda_autotest',
+        'rwlock_rds_wrm_autotest',
+        'rwlock_rde_wro_autotest',
         'sched_autotest',
         'spinlock_autotest',
         'stack_autotest',
-        'stack_nb_autotest',
+        'stack_lf_autotest',
         'string_autotest',
         'table_autotest',
         'tailq_autotest',
         'timer_autotest',
         'user_delay_us',
         'version_autotest',
-]
-
-# All test cases in fast_non_parallel_test_names list are non-parallel
-fast_non_parallel_test_names = [
         'bitratestats_autotest',
         'crc_autotest',
         'delay_us_sleep_autotest',
         'distributor_autotest',
         'eventdev_common_autotest',
-        'eventdev_octeontx_autotest',
-        'eventdev_sw_autotest',
         'fbarray_autotest',
         'hash_readwrite_autotest',
         'hash_readwrite_lf_autotest',
-        'hash_scaling_autotest',
         'ipsec_autotest',
         'kni_autotest',
         'kvargs_autotest',
@@ -217,7 +230,7 @@ fast_non_parallel_test_names = [
         'member_autotest',
         'metrics_autotest',
         'pdump_autotest',
-        'power_acpi_cpufreq_autotest',
+        'power_cpufreq_autotest',
         'power_autotest',
         'power_kvm_vm_autotest',
         'reorder_autotest',
@@ -225,7 +238,6 @@ fast_non_parallel_test_names = [
         'thash_autotest',
 ]
 
-# All test cases in perf_test_names list are non-parallel
 perf_test_names = [
         'ring_perf_autotest',
         'mempool_perf_autotest',
@@ -241,7 +253,6 @@ perf_test_names = [
         'timer_racecond_autotest',
         'efd_autotest',
         'hash_functions_autotest',
-        'eventdev_selftest_sw',
         'member_perf_autotest',
         'efd_perf_autotest',
         'lpm6_perf_autotest',
@@ -251,16 +262,17 @@ perf_test_names = [
         'ring_pmd_perf_autotest',
         'pmd_perf_autotest',
         'stack_perf_autotest',
-        'stack_nb_perf_autotest',
+        'stack_lf_perf_autotest',
+        'rand_perf_autotest',
 ]
 
-# All test cases in driver_test_names list are non-parallel
 driver_test_names = [
         'cryptodev_aesni_mb_autotest',
         'cryptodev_aesni_gcm_autotest',
         'cryptodev_dpaa_sec_autotest',
         'cryptodev_dpaa2_sec_autotest',
         'cryptodev_null_autotest',
+        'cryptodev_octeontx2_autotest',
         'cryptodev_openssl_autotest',
         'cryptodev_openssl_asym_autotest',
         'cryptodev_qat_autotest',
@@ -269,12 +281,14 @@ driver_test_names = [
         'cryptodev_sw_mvsam_autotest',
         'cryptodev_sw_snow3g_autotest',
         'cryptodev_sw_zuc_autotest',
+        'eventdev_selftest_octeontx',
+        'eventdev_selftest_sw',
         'link_bonding_autotest',
         'link_bonding_mode4_autotest',
         'link_bonding_rssconf_autotest',
+        'rawdev_autotest',
 ]
 
-# All test cases in dump_test_names list are non-parallel
 dump_test_names = [
         'dump_struct_sizes',
         'dump_mempool',
@@ -286,27 +300,38 @@ dump_test_names = [
         'dump_memzone',
 ]
 
-if dpdk_conf.has('RTE_LIBRTE_PDUMP')
-       test_deps += 'pdump'
+# The following linkages are an exception to allow running the
+# unit tests without requiring that the developer install the
+# DPDK libraries.  Explicit linkage of drivers (plugin libraries)
+# in applications should not be used.
+if dpdk_conf.has('RTE_LIBRTE_RING_MEMPOOL')
+       test_deps += 'mempool_ring'
 endif
-if dpdk_conf.has('RTE_LIBRTE_I40E_PMD')
-       test_deps += 'pmd_i40e'
+if dpdk_conf.has('RTE_LIBRTE_STACK_MEMPOOL')
+       test_deps += 'mempool_stack'
 endif
-if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD')
-       test_deps += 'pmd_ixgbe'
+if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD')
+       test_deps += 'pmd_skeleton_event'
 endif
+
+# The following linkages of drivers are required because
+# they are used via a driver-specific API.
 if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
        test_deps += 'pmd_bond'
 endif
 if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
        test_deps += 'pmd_ring'
 endif
+
 if dpdk_conf.has('RTE_LIBRTE_POWER')
        test_deps += 'power'
 endif
 if dpdk_conf.has('RTE_LIBRTE_KNI')
        test_deps += 'kni'
 endif
+if dpdk_conf.has('RTE_LIBRTE_PDUMP')
+       test_deps += 'pdump'
+endif
 
 cflags = machine_args
 if cc.has_argument('-Wno-format-truncation')
@@ -323,7 +348,7 @@ if dpdk_conf.has('RTE_LIBRTE_COMPRESSDEV')
                test_dep_objs += compress_test_dep
                test_sources += 'test_compressdev.c'
                test_deps += 'compressdev'
-               fast_non_parallel_test_names += 'compressdev_autotest'
+               fast_test_names += 'compressdev_autotest'
        endif
 endif
 
@@ -348,7 +373,7 @@ dpdk_test = executable('dpdk-test',
        dependencies: test_dep_objs,
        c_args: [cflags, '-DALLOW_EXPERIMENTAL_API'],
        install_rpath: driver_install_path,
-       install: false)
+       install: true)
 
 # some perf tests (eg: memcpy perf autotest)take very long
 # to complete, so timeout to 10 minutes
@@ -370,31 +395,24 @@ endif
 
 num_cores_arg = '-l ' + num_cores
 
-test_args = [num_cores_arg, '-n 4']
-foreach arg : fast_parallel_test_names
+test_args = [num_cores_arg]
+foreach arg : fast_test_names
        if host_machine.system() == 'linux'
                test(arg, dpdk_test,
                          env : ['DPDK_TEST=' + arg],
                          args : test_args +
                                 ['--file-prefix=@0@'.format(arg)],
                timeout : timeout_seconds_fast,
+               is_parallel : false,
                suite : 'fast-tests')
        else
                test(arg, dpdk_test,
                        env : ['DPDK_TEST=' + arg],
                        args : test_args,
                timeout : timeout_seconds_fast,
-               suite : 'fast-tests')
-       endif
-endforeach
-
-foreach arg : fast_non_parallel_test_names
-       test(arg, dpdk_test,
-               env : ['DPDK_TEST=' + arg],
-               args : test_args,
-               timeout : timeout_seconds_fast,
                is_parallel : false,
                suite : 'fast-tests')
+       endif
 endforeach
 
 foreach arg : perf_test_names