--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2013 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+#include <errno.h>
+
+#include <cmdline_parse.h>
+
+#include <rte_string_fns.h>
+#include <rte_mbuf.h>
+
+#include "test.h"
+
+#ifdef RTE_LIBRTE_ACL
+
+#include <rte_byteorder.h>
+#include <rte_ip.h>
+#include <rte_acl.h>
+
+#include "test_acl.h"
+
+#define LEN RTE_ACL_MAX_CATEGORIES
+
+struct rte_acl_param acl_param = {
+ .name = "acl_ctx",
+ .socket_id = SOCKET_ID_ANY,
+ .rule_size = sizeof(struct rte_acl_ipv4vlan_rule),
+ .max_rule_num = 0x30000,
+};
+
+struct rte_acl_ipv4vlan_rule acl_rule = {
+ .data = { .priority = 1, .category_mask = 0xff },
+ .src_port_low = 0,
+ .src_port_high = UINT16_MAX,
+ .dst_port_low = 0,
+ .dst_port_high = UINT16_MAX,
+};
+
+/* byteswap to cpu or network order */
+static void
+bswap_test_data(struct ipv4_7tuple * data, int len, int to_be)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+
+ if (to_be) {
+ /* swap all bytes so that they are in network order */
+ data[i].ip_dst = rte_cpu_to_be_32(data[i].ip_dst);
+ data[i].ip_src = rte_cpu_to_be_32(data[i].ip_src);
+ data[i].port_dst = rte_cpu_to_be_16(data[i].port_dst);
+ data[i].port_src = rte_cpu_to_be_16(data[i].port_src);
+ data[i].vlan = rte_cpu_to_be_16(data[i].vlan);
+ data[i].domain = rte_cpu_to_be_16(data[i].domain);
+ }
+ else {
+ data[i].ip_dst = rte_be_to_cpu_32(data[i].ip_dst);
+ data[i].ip_src = rte_be_to_cpu_32(data[i].ip_src);
+ data[i].port_dst = rte_be_to_cpu_16(data[i].port_dst);
+ data[i].port_src = rte_be_to_cpu_16(data[i].port_src);
+ data[i].vlan = rte_be_to_cpu_16(data[i].vlan);
+ data[i].domain = rte_be_to_cpu_16(data[i].domain);
+ }
+ }
+}
+
+/*
+ * Test scalar and SSE ACL lookup.
+ */
+static int
+test_classify(void)
+{
+ struct rte_acl_ctx * acx;
+ int ret, i;
+ uint32_t result, count;
+
+ uint32_t results[DIM(acl_test_data) * RTE_ACL_MAX_CATEGORIES];
+
+ const uint8_t * data[DIM(acl_test_data)];
+
+ const uint32_t layout[RTE_ACL_IPV4VLAN_NUM] = {
+ offsetof(struct ipv4_7tuple, proto),
+ offsetof(struct ipv4_7tuple, vlan),
+ offsetof(struct ipv4_7tuple, ip_src),
+ offsetof(struct ipv4_7tuple, ip_dst),
+ offsetof(struct ipv4_7tuple, port_src),
+ };
+
+ acx = rte_acl_create(&acl_param);
+ if (acx == NULL) {
+ printf("Line %i: Error creating ACL context!\n", __LINE__);
+ return -1;
+ }
+
+ /* add rules to the context */
+ ret = rte_acl_ipv4vlan_add_rules(acx, acl_test_rules,
+ DIM(acl_test_rules));
+ if (ret != 0) {
+ printf("Line %i: Adding rules to ACL context failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* try building the context */
+ ret = rte_acl_ipv4vlan_build(acx, layout, RTE_ACL_MAX_CATEGORIES);
+ if (ret != 0) {
+ printf("Line %i: Building ACL context failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* swap all bytes in the data to network order */
+ bswap_test_data(acl_test_data, DIM(acl_test_data), 1);
+
+ /* store pointers to test data */
+ for (i = 0; i < (int) DIM(acl_test_data); i++)
+ data[i] = (uint8_t *)&acl_test_data[i];
+
+ /**
+ * these will run quite a few times, it's necessary to test code paths
+ * from num=0 to num>8
+ */
+ for (count = 0; count < DIM(acl_test_data); count++) {
+ ret = rte_acl_classify(acx, data, results,
+ count, RTE_ACL_MAX_CATEGORIES);
+ if (ret != 0) {
+ printf("Line %i: SSE classify failed!\n", __LINE__);
+ goto err;
+ }
+
+ /* check if we allow everything we should allow */
+ for (i = 0; i < (int) count; i++) {
+ result = results[i * RTE_ACL_MAX_CATEGORIES + ACL_ALLOW];
+ if (result != acl_test_data[i].allow) {
+ printf("Line %i: Error in allow results at %i "
+ "(expected %"PRIu32" got %"PRIu32")!\n",
+ __LINE__, i, acl_test_data[i].allow,
+ result);
+ goto err;
+ }
+ }
+
+ /* check if we deny everything we should deny */
+ for (i = 0; i < (int) count; i++) {
+ result = results[i * RTE_ACL_MAX_CATEGORIES + ACL_DENY];
+ if (result != acl_test_data[i].deny) {
+ printf("Line %i: Error in deny results at %i "
+ "(expected %"PRIu32" got %"PRIu32")!\n",
+ __LINE__, i, acl_test_data[i].deny,
+ result);
+ goto err;
+ }
+ }
+ }
+
+ /* make a quick check for scalar */
+ ret = rte_acl_classify_scalar(acx, data, results,
+ DIM(acl_test_data), RTE_ACL_MAX_CATEGORIES);
+ if (ret != 0) {
+ printf("Line %i: SSE classify failed!\n", __LINE__);
+ goto err;
+ }
+
+ /* check if we allow everything we should allow */
+ for (i = 0; i < (int) DIM(acl_test_data); i++) {
+ result = results[i * RTE_ACL_MAX_CATEGORIES + ACL_ALLOW];
+ if (result != acl_test_data[i].allow) {
+ printf("Line %i: Error in allow results at %i "
+ "(expected %"PRIu32" got %"PRIu32")!\n",
+ __LINE__, i, acl_test_data[i].allow,
+ result);
+ goto err;
+ }
+ }
+
+ /* check if we deny everything we should deny */
+ for (i = 0; i < (int) DIM(acl_test_data); i++) {
+ result = results[i * RTE_ACL_MAX_CATEGORIES + ACL_DENY];
+ if (result != acl_test_data[i].deny) {
+ printf("Line %i: Error in deny results at %i "
+ "(expected %"PRIu32" got %"PRIu32")!\n",
+ __LINE__, i, acl_test_data[i].deny,
+ result);
+ goto err;
+ }
+ }
+
+ /* free ACL context */
+ rte_acl_free(acx);
+
+ /* swap data back to cpu order so that next time tests don't fail */
+ bswap_test_data(acl_test_data, DIM(acl_test_data), 0);
+
+ return 0;
+err:
+
+ /* swap data back to cpu order so that next time tests don't fail */
+ bswap_test_data(acl_test_data, DIM(acl_test_data), 0);
+
+ rte_acl_free(acx);
+
+ return -1;
+}
+
+/*
+ * Test wrong layout behavior
+ * This test supplies the ACL context with invalid layout, which results in
+ * ACL matching the wrong stuff. However, it should match the wrong stuff
+ * the right way. We switch around source and destination addresses,
+ * source and destination ports, and protocol will point to first byte of
+ * destination port.
+ */
+static int
+test_invalid_layout(void)
+{
+ struct rte_acl_ctx * acx;
+ int ret, i;
+
+ uint32_t results[DIM(invalid_layout_data)];
+ const uint8_t * data[DIM(invalid_layout_data)];
+
+ const uint32_t layout[RTE_ACL_IPV4VLAN_NUM] = {
+ /* proto points to destination port's first byte */
+ offsetof(struct ipv4_7tuple, port_dst),
+
+ 0, /* VLAN not used */
+
+ /* src and dst addresses are swapped */
+ offsetof(struct ipv4_7tuple, ip_dst),
+ offsetof(struct ipv4_7tuple, ip_src),
+
+ /* we can't swap ports here, so we will swap them in the data */
+ offsetof(struct ipv4_7tuple, port_src),
+ };
+
+ acx = rte_acl_create(&acl_param);
+ if (acx == NULL) {
+ printf("Line %i: Error creating ACL context!\n", __LINE__);
+ return -1;
+ }
+
+ /* putting a lot of rules into the context results in greater
+ * coverage numbers. it doesn't matter if they are identical */
+ for (i = 0; i < 1000; i++) {
+ /* add rules to the context */
+ ret = rte_acl_ipv4vlan_add_rules(acx, invalid_layout_rules,
+ DIM(invalid_layout_rules));
+ if (ret != 0) {
+ printf("Line %i: Adding rules to ACL context failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+ }
+
+ /* try building the context */
+ ret = rte_acl_ipv4vlan_build(acx, layout, 1);
+ if (ret != 0) {
+ printf("Line %i: Building ACL context failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* swap all bytes in the data to network order */
+ bswap_test_data(invalid_layout_data, DIM(invalid_layout_data), 1);
+
+ /* prepare data */
+ for (i = 0; i < (int) DIM(invalid_layout_data); i++) {
+ data[i] = (uint8_t *)&invalid_layout_data[i];
+ }
+
+ /* classify tuples */
+ ret = rte_acl_classify(acx, data, results,
+ DIM(results), 1);
+ if (ret != 0) {
+ printf("Line %i: SSE classify failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ for (i = 0; i < (int) DIM(results); i++) {
+ if (results[i] != invalid_layout_data[i].allow) {
+ printf("Line %i: Wrong results at %i (result=%u, should be %u)!\n",
+ __LINE__, i, results[i], invalid_layout_data[i].allow);
+ goto err;
+ }
+ }
+
+ /* classify tuples (scalar) */
+ ret = rte_acl_classify_scalar(acx, data, results,
+ DIM(results), 1);
+ if (ret != 0) {
+ printf("Line %i: Scalar classify failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ for (i = 0; i < (int) DIM(results); i++) {
+ if (results[i] != invalid_layout_data[i].allow) {
+ printf("Line %i: Wrong results at %i (result=%u, should be %u)!\n",
+ __LINE__, i, results[i], invalid_layout_data[i].allow);
+ goto err;
+ }
+ }
+
+ rte_acl_free(acx);
+
+ /* swap data back to cpu order so that next time tests don't fail */
+ bswap_test_data(invalid_layout_data, DIM(invalid_layout_data), 0);
+
+ return 0;
+err:
+
+ /* swap data back to cpu order so that next time tests don't fail */
+ bswap_test_data(invalid_layout_data, DIM(invalid_layout_data), 0);
+
+ rte_acl_free(acx);
+
+ return -1;
+}
+
+/*
+ * Test creating and finding ACL contexts, and adding rules
+ */
+static int
+test_create_find_add(void)
+{
+ struct rte_acl_param param;
+ struct rte_acl_ctx * acx, *acx2, *tmp;
+ struct rte_acl_ipv4vlan_rule rules[LEN];
+
+ const uint32_t layout[RTE_ACL_IPV4VLAN_NUM] = {0};
+
+ const char * acx_name = "acx";
+ const char * acx2_name = "acx2";
+ int i, ret;
+
+ /* create two contexts */
+ memcpy(¶m, &acl_param, sizeof(param));
+ param.max_rule_num = 2;
+
+ param.name = acx_name;
+ acx = rte_acl_create(¶m);
+ if (acx == NULL) {
+ printf("Line %i: Error creating %s!\n", __LINE__, acx_name);
+ return -1;
+ }
+
+ param.name = acx2_name;
+ acx2 = rte_acl_create(¶m);
+ if (acx2 == NULL || acx2 == acx) {
+ printf("Line %i: Error creating %s!\n", __LINE__, acx2_name);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* try to create third one, with an existing name */
+ param.name = acx_name;
+ tmp = rte_acl_create(¶m);
+ if (tmp != acx) {
+ printf("Line %i: Creating context with existing name test failed!\n",
+ __LINE__);
+ if (tmp)
+ rte_acl_free(tmp);
+ goto err;
+ }
+
+ param.name = acx2_name;
+ tmp = rte_acl_create(¶m);
+ if (tmp != acx2) {
+ printf("Line %i: Creating context with existing name test 2 failed!\n",
+ __LINE__);
+ if (tmp)
+ rte_acl_free(tmp);
+ goto err;
+ }
+
+ /* try to find existing ACL contexts */
+ tmp = rte_acl_find_existing(acx_name);
+ if (tmp != acx) {
+ printf("Line %i: Finding %s failed!\n", __LINE__, acx_name);
+ if (tmp)
+ rte_acl_free(tmp);
+ goto err;
+ }
+
+ tmp = rte_acl_find_existing(acx2_name);
+ if (tmp != acx2) {
+ printf("Line %i: Finding %s failed!\n", __LINE__, acx2_name);
+ if (tmp)
+ rte_acl_free(tmp);
+ goto err;
+ }
+
+ /* try to find non-existing context */
+ tmp = rte_acl_find_existing("invalid");
+ if (tmp != NULL) {
+ printf("Line %i: Non-existent ACL context found!\n", __LINE__);
+ goto err;
+ }
+
+ /* free context */
+ rte_acl_free(acx);
+
+
+ /* create valid (but severely limited) acx */
+ memcpy(¶m, &acl_param, sizeof(param));
+ param.max_rule_num = LEN;
+
+ acx = rte_acl_create(¶m);
+ if (acx == NULL) {
+ printf("Line %i: Error creating %s!\n", __LINE__, param.name);
+ goto err;
+ }
+
+ /* create dummy acl */
+ for (i = 0; i < LEN; i++) {
+ memcpy(&rules[i], &acl_rule, sizeof(struct rte_acl_ipv4vlan_rule));
+ rules[i].data.userdata = i + 1; /* skip zero */
+ rules[i].data.category_mask = 1 << i; /* one rule per category */
+ }
+
+ /* try filling up the context */
+ ret = rte_acl_ipv4vlan_add_rules(acx, rules, LEN);
+ if (ret != 0) {
+ printf("Line %i: Adding %i rules to ACL context failed!\n",
+ __LINE__, LEN);
+ goto err;
+ }
+
+ /* try adding to a (supposedly) full context */
+ ret = rte_acl_ipv4vlan_add_rules(acx, rules, 1);
+ if (ret == 0) {
+ printf("Line %i: Adding rules to full ACL context should"
+ "have failed!\n", __LINE__);
+ goto err;
+ }
+
+ /* try building the context */
+ ret = rte_acl_ipv4vlan_build(acx, layout, RTE_ACL_MAX_CATEGORIES);
+ if (ret != 0) {
+ printf("Line %i: Building ACL context failed!\n", __LINE__);
+ goto err;
+ }
+
+ rte_acl_free(acx);
+ rte_acl_free(acx2);
+
+ return 0;
+err:
+ rte_acl_free(acx);
+ rte_acl_free(acx2);
+ return -1;
+}
+
+/*
+ * test various invalid rules
+ */
+static int
+test_invalid_rules(void)
+{
+ struct rte_acl_ctx * acx;
+ int ret;
+
+ struct rte_acl_ipv4vlan_rule rule;
+
+ acx = rte_acl_create(&acl_param);
+ if (acx == NULL) {
+ printf("Line %i: Error creating ACL context!\n", __LINE__);
+ return -1;
+ }
+
+ /* test inverted high/low source and destination ports.
+ * originally, there was a problem with memory consumption when using
+ * such rules.
+ */
+ /* create dummy acl */
+ memcpy(&rule, &acl_rule, sizeof(struct rte_acl_ipv4vlan_rule));
+ rule.data.userdata = 1;
+ rule.dst_port_low = 0xfff0;
+ rule.dst_port_high = 0x0010;
+
+ /* add rules to context and try to build it */
+ ret = rte_acl_ipv4vlan_add_rules(acx, &rule, 1);
+ if (ret == 0) {
+ printf("Line %i: Adding rules to ACL context "
+ "should have failed!\n", __LINE__);
+ goto err;
+ }
+
+ rule.dst_port_low = 0x0;
+ rule.dst_port_high = 0xffff;
+ rule.src_port_low = 0xfff0;
+ rule.src_port_high = 0x0010;
+
+ /* add rules to context and try to build it */
+ ret = rte_acl_ipv4vlan_add_rules(acx, &rule, 1);
+ if (ret == 0) {
+ printf("Line %i: Adding rules to ACL context "
+ "should have failed!\n", __LINE__);
+ goto err;
+ }
+
+ rule.dst_port_low = 0x0;
+ rule.dst_port_high = 0xffff;
+ rule.src_port_low = 0x0;
+ rule.src_port_high = 0xffff;
+
+ rule.dst_mask_len = 33;
+
+ /* add rules to context and try to build it */
+ ret = rte_acl_ipv4vlan_add_rules(acx, &rule, 1);
+ if (ret == 0) {
+ printf("Line %i: Adding rules to ACL context "
+ "should have failed!\n", __LINE__);
+ goto err;
+ }
+
+ rule.dst_mask_len = 0;
+ rule.src_mask_len = 33;
+
+ /* add rules to context and try to build it */
+ ret = rte_acl_ipv4vlan_add_rules(acx, &rule, 1);
+ if (ret == 0) {
+ printf("Line %i: Adding rules to ACL context "
+ "should have failed!\n", __LINE__);
+ goto err;
+ }
+
+ rule.dst_mask_len = 0;
+ rule.src_mask_len = 0;
+ rule.data.userdata = 0;
+
+ /* try adding this rule (it should fail because userdata is invalid) */
+ ret = rte_acl_ipv4vlan_add_rules(acx, &rule, 1);
+ if (ret == 0) {
+ printf("Line %i: Adding a rule with invalid user data "
+ "should have failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ rte_acl_free(acx);
+
+ return 0;
+
+err:
+ rte_acl_free(acx);
+
+ return -1;
+}
+
+/*
+ * test functions by passing invalid or
+ * non-workable parameters.
+ *
+ * we do very limited testing of classify functions here
+ * because those are performance-critical and
+ * thus don't do much parameter checking.
+ */
+static int
+test_invalid_parameters(void)
+{
+ struct rte_acl_param param;
+ struct rte_acl_ctx * acx;
+ struct rte_acl_ipv4vlan_rule rule;
+ int result;
+
+ uint32_t layout[RTE_ACL_IPV4VLAN_NUM] = {0};
+
+
+ /**
+ * rte_ac_create()
+ */
+
+ /* NULL param */
+ acx = rte_acl_create(NULL);
+ if (acx != NULL) {
+ printf("Line %i: ACL context creation with NULL param "
+ "should have failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* zero rule size */
+ memcpy(¶m, &acl_param, sizeof(param));
+ param.rule_size = 0;
+
+ acx = rte_acl_create(¶m);
+ if (acx == NULL) {
+ printf("Line %i: ACL context creation with zero rule len "
+ "failed!\n", __LINE__);
+ return -1;
+ }
+ else
+ rte_acl_free(acx);
+
+ /* zero max rule num */
+ memcpy(¶m, &acl_param, sizeof(param));
+ param.max_rule_num = 0;
+
+ acx = rte_acl_create(¶m);
+ if (acx == NULL) {
+ printf("Line %i: ACL context creation with zero rule num "
+ "failed!\n", __LINE__);
+ return -1;
+ }
+ else
+ rte_acl_free(acx);
+
+ /* invalid NUMA node */
+ memcpy(¶m, &acl_param, sizeof(param));
+ param.socket_id = RTE_MAX_NUMA_NODES + 1;
+
+ acx = rte_acl_create(¶m);
+ if (acx != NULL) {
+ printf("Line %i: ACL context creation with invalid NUMA "
+ "should have failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* NULL name */
+ memcpy(¶m, &acl_param, sizeof(param));
+ param.name = NULL;
+
+ acx = rte_acl_create(¶m);
+ if (acx != NULL) {
+ printf("Line %i: ACL context creation with NULL name "
+ "should have failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /**
+ * rte_acl_find_existing
+ */
+
+ acx = rte_acl_find_existing(NULL);
+ if (acx != NULL) {
+ printf("Line %i: NULL ACL context found!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /**
+ * rte_acl_ipv4vlan_add_rules
+ */
+
+ /* initialize everything */
+ memcpy(¶m, &acl_param, sizeof(param));
+ acx = rte_acl_create(¶m);
+ if (acx == NULL) {
+ printf("Line %i: ACL context creation failed!\n", __LINE__);
+ return -1;
+ }
+
+ memcpy(&rule, &acl_rule, sizeof(rule));
+
+ /* NULL context */
+ result = rte_acl_ipv4vlan_add_rules(NULL, &rule, 1);
+ if (result == 0) {
+ printf("Line %i: Adding rules with NULL ACL context "
+ "should have failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* NULL rule */
+ result = rte_acl_ipv4vlan_add_rules(acx, NULL, 1);
+ if (result == 0) {
+ printf("Line %i: Adding NULL rule to ACL context "
+ "should have failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* zero count (should succeed) */
+ result = rte_acl_ipv4vlan_add_rules(acx, &rule, 0);
+ if (result != 0) {
+ printf("Line %i: Adding 0 rules to ACL context failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* free ACL context */
+ rte_acl_free(acx);
+
+ /* set wrong rule_size so that adding any rules would fail */
+ param.rule_size = sizeof(struct rte_acl_ipv4vlan_rule) + 4;
+ acx = rte_acl_create(¶m);
+ if (acx == NULL) {
+ printf("Line %i: ACL context creation failed!\n", __LINE__);
+ return -1;
+ }
+
+ /* try adding a rule with size different from context rule_size */
+ result = rte_acl_ipv4vlan_add_rules(acx, &rule, 1);
+ if (result == 0) {
+ printf("Line %i: Adding an invalid sized rule "
+ "should have failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* free ACL context */
+ rte_acl_free(acx);
+
+
+ /**
+ * rte_acl_ipv4vlan_build
+ */
+
+ /* reinitialize context */
+ memcpy(¶m, &acl_param, sizeof(param));
+ acx = rte_acl_create(¶m);
+ if (acx == NULL) {
+ printf("Line %i: ACL context creation failed!\n", __LINE__);
+ return -1;
+ }
+
+ /* NULL context */
+ result = rte_acl_ipv4vlan_build(NULL, layout, 1);
+ if (result == 0) {
+ printf("Line %i: Building with NULL context "
+ "should have failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* NULL layout */
+ result = rte_acl_ipv4vlan_build(acx, NULL, 1);
+ if (result == 0) {
+ printf("Line %i: Building with NULL layout "
+ "should have failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* zero categories (should not fail) */
+ result = rte_acl_ipv4vlan_build(acx, layout, 0);
+ if (result != 0) {
+ printf("Line %i: Building with 0 categories failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* SSE classify test */
+
+ /* cover zero categories in classify (should not fail) */
+ result = rte_acl_classify(acx, NULL, NULL, 0, 0);
+ if (result != 0) {
+ printf("Line %i: SSE classify with zero categories "
+ "failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* cover invalid but positive categories in classify */
+ result = rte_acl_classify(acx, NULL, NULL, 0, 3);
+ if (result == 0) {
+ printf("Line %i: SSE classify with 3 categories "
+ "should have failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* scalar classify test */
+
+ /* cover zero categories in classify (should not fail) */
+ result = rte_acl_classify_scalar(acx, NULL, NULL, 0, 0);
+ if (result != 0) {
+ printf("Line %i: Scalar classify with zero categories "
+ "failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* cover invalid but positive categories in classify */
+ result = rte_acl_classify_scalar(acx, NULL, NULL, 0, 3);
+ if (result == 0) {
+ printf("Line %i: Scalar classify with 3 categories "
+ "should have failed!\n", __LINE__);
+ rte_acl_free(acx);
+ return -1;
+ }
+
+ /* free ACL context */
+ rte_acl_free(acx);
+
+
+ /**
+ * make sure void functions don't crash with NULL parameters
+ */
+
+ rte_acl_free(NULL);
+
+ rte_acl_dump(NULL);
+
+ return 0;
+}
+
+/**
+ * Various tests that don't test much but improve coverage
+ */
+static int
+test_misc(void)
+{
+ struct rte_acl_param param;
+ struct rte_acl_ctx * acx;
+
+ /* create context */
+ memcpy(¶m, &acl_param, sizeof(param));
+
+ acx = rte_acl_create(¶m);
+ if (acx == NULL) {
+ printf("Line %i: Error creating ACL context!\n", __LINE__);
+ return -1;
+ }
+
+ /* dump context with rules - useful for coverage */
+ rte_acl_list_dump();
+
+ rte_acl_dump(acx);
+
+ rte_acl_free(acx);
+
+ return 0;
+}
+
+int
+test_acl(void)
+{
+ if (test_invalid_parameters() < 0)
+ return -1;
+ if (test_invalid_rules() < 0)
+ return -1;
+ if (test_create_find_add() < 0)
+ return -1;
+ if (test_invalid_layout() < 0)
+ return -1;
+ if (test_misc() < 0)
+ return -1;
+ if (test_classify() < 0)
+ return -1;
+
+ return 0;
+}
+#else
+
+int
+test_acl(void)
+{
+ printf("This binary was not compiled with ACL support!\n");
+ return 0;
+}
+
+#endif /* RTE_LIBRTE_ACL */
git.droids-corp.org / dpdk.git / blobdiff