* Mempool
* =======
*
- * #. Basic tests: done on one core with and without cache:
+ * Basic tests: done on one core with and without cache:
*
* - Get one object, put one object
* - Get two objects, put two objects
* - Get all objects, test that their content is not modified and
* put them back in the pool.
- *
- * #. Performance tests:
- *
- * Each core get *n_keep* objects per bulk of *n_get_bulk*. Then,
- * objects are put back in the pool per bulk of *n_put_bulk*.
- *
- * This sequence is done during TIME_S seconds.
- *
- * This test is done on the following configurations:
- *
- * - Cores configuration (*cores*)
- *
- * - One core with cache
- * - Two cores with cache
- * - Max. cores with cache
- * - One core without cache
- * - Two cores without cache
- * - Max. cores without cache
- *
- * - Bulk size (*n_get_bulk*, *n_put_bulk*)
- *
- * - Bulk get from 1 to 32
- * - Bulk put from 1 to 32
- *
- * - Number of kept objects (*n_keep*)
- *
- * - 32
- * - 128
*/
#define N 65536
static rte_atomic32_t synchro;
-/* number of objects in one bulk operation (get or put) */
-static unsigned n_get_bulk;
-static unsigned n_put_bulk;
-
-/* number of objects retrived from mempool before putting them back */
-static unsigned n_keep;
-
-/* number of enqueues / dequeues */
-struct mempool_test_stats {
- unsigned enq_count;
-} __rte_cache_aligned;
-
-static struct mempool_test_stats stats[RTE_MAX_LCORE];
-
-static int
-per_lcore_mempool_test(__attribute__((unused)) void *arg)
-{
- void *obj_table[MAX_KEEP];
- unsigned i, idx;
- unsigned lcore_id = rte_lcore_id();
- int ret;
- uint64_t start_cycles, end_cycles;
- uint64_t time_diff = 0, hz = rte_get_hpet_hz();
-
- /* n_get_bulk and n_put_bulk must be divisors of n_keep */
- if (((n_keep / n_get_bulk) * n_get_bulk) != n_keep)
- return -1;
- if (((n_keep / n_put_bulk) * n_put_bulk) != n_keep)
- return -1;
-
- stats[lcore_id].enq_count = 0;
-
- /* wait synchro for slaves */
- if (lcore_id != rte_get_master_lcore())
- while (rte_atomic32_read(&synchro) == 0);
-
- start_cycles = rte_get_hpet_cycles();
-
- while (time_diff/hz < TIME_S) {
- for (i = 0; likely(i < (N/n_keep)); i++) {
- /* get n_keep objects by bulk of n_bulk */
- idx = 0;
- while (idx < n_keep) {
- ret = rte_mempool_get_bulk(mp, &obj_table[idx],
- n_get_bulk);
- if (unlikely(ret < 0)) {
- rte_mempool_dump(mp);
- rte_ring_dump(mp->ring);
- /* in this case, objects are lost... */
- return -1;
- }
- idx += n_get_bulk;
- }
-
- /* put the objects back */
- idx = 0;
- while (idx < n_keep) {
- rte_mempool_put_bulk(mp, &obj_table[idx],
- n_put_bulk);
- idx += n_put_bulk;
- }
- }
- end_cycles = rte_get_hpet_cycles();
- time_diff = end_cycles - start_cycles;
- stats[lcore_id].enq_count += N;
- }
-
- return 0;
-}
-
-/* launch all the per-lcore test, and display the result */
-static int
-launch_cores(unsigned cores)
-{
- unsigned lcore_id;
- unsigned rate;
- int ret;
- unsigned cores_save = cores;
-
- rte_atomic32_set(&synchro, 0);
-
- /* reset stats */
- memset(stats, 0, sizeof(stats));
-
- printf("mempool_autotest cache=%u cores=%u n_get_bulk=%u "
- "n_put_bulk=%u n_keep=%u ",
- (unsigned) mp->cache_size, cores, n_get_bulk, n_put_bulk, n_keep);
-
- if (rte_mempool_count(mp) != MEMPOOL_SIZE) {
- printf("mempool is not full\n");
- return -1;
- }
-
- RTE_LCORE_FOREACH_SLAVE(lcore_id) {
- if (cores == 1)
- break;
- cores--;
- rte_eal_remote_launch(per_lcore_mempool_test,
- NULL, lcore_id);
- }
-
- /* start synchro and launch test on master */
- rte_atomic32_set(&synchro, 1);
-
- ret = per_lcore_mempool_test(NULL);
-
- cores = cores_save;
- RTE_LCORE_FOREACH_SLAVE(lcore_id) {
- if (cores == 1)
- break;
- cores--;
- if (rte_eal_wait_lcore(lcore_id) < 0)
- ret = -1;
- }
-
- if (ret < 0) {
- printf("per-lcore test returned -1\n");
- return -1;
- }
-
- rate = 0;
- for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++)
- rate += (stats[lcore_id].enq_count / TIME_S);
-
- printf("rate_persec=%u\n", rate);
-
- return 0;
-}
-
-/* for a given number of core, launch all test cases */
-static int
-do_one_mempool_test(unsigned cores)
-{
- unsigned bulk_tab_get[] = { 1, 4, 32, 0 };
- unsigned bulk_tab_put[] = { 1, 4, 32, 0 };
- unsigned keep_tab[] = { 32, 128, 0 };
- unsigned *get_bulk_ptr;
- unsigned *put_bulk_ptr;
- unsigned *keep_ptr;
- int ret;
-
- for (get_bulk_ptr = bulk_tab_get; *get_bulk_ptr; get_bulk_ptr++) {
- for (put_bulk_ptr = bulk_tab_put; *put_bulk_ptr; put_bulk_ptr++) {
- for (keep_ptr = keep_tab; *keep_ptr; keep_ptr++) {
-
- n_get_bulk = *get_bulk_ptr;
- n_put_bulk = *put_bulk_ptr;
- n_keep = *keep_ptr;
- ret = launch_cores(cores);
-
- if (ret < 0)
- return -1;
- }
- }
- }
- return 0;
-}
/*
char *obj_data;
int ret = 0;
unsigned i, j;
- unsigned old_bulk_count;
/* dump the mempool status */
rte_mempool_dump(mp);
- old_bulk_count = rte_mempool_get_bulk_count(mp);
- rte_mempool_dump(mp);
- if (rte_mempool_set_bulk_count(mp, 0) == 0)
- return -1;
- if (rte_mempool_get_bulk_count(mp) == 0)
- return -1;
- if (rte_mempool_set_bulk_count(mp, 2) < 0)
- return -1;
- if (rte_mempool_get_bulk_count(mp) != 2)
+
+ printf("get an object\n");
+ if (rte_mempool_get(mp, &obj) < 0)
return -1;
rte_mempool_dump(mp);
- if (rte_mempool_set_bulk_count(mp, old_bulk_count) < 0)
+
+ /* tests that improve coverage */
+ printf("get object count\n");
+ if (rte_mempool_count(mp) != MEMPOOL_SIZE - 1)
return -1;
- if (rte_mempool_get_bulk_count(mp) != old_bulk_count)
+
+ printf("get private data\n");
+ if (rte_mempool_get_priv(mp) !=
+ (char*) mp + sizeof(struct rte_mempool))
return -1;
- rte_mempool_dump(mp);
- printf("get an object\n");
- if (rte_mempool_get(mp, &obj) < 0)
+ printf("get physical address of an object\n");
+ if (rte_mempool_virt2phy(mp, obj) !=
+ (phys_addr_t) (mp->phys_addr + (phys_addr_t) ((char*) obj - (char*) mp)))
return -1;
- rte_mempool_dump(mp);
printf("put the object back\n");
rte_mempool_put(mp, obj);
break;
rte_spinlock_lock(&scsp_spinlock);
for (i = 0; i < MAX_KEEP; i ++) {
- if (NULL != scsp_obj_table[i])
+ if (NULL != scsp_obj_table[i]) {
obj = scsp_obj_table[i];
break;
+ }
}
rte_spinlock_unlock(&scsp_spinlock);
if (i >= MAX_KEEP) {
if (test_mempool_basic_ex(mp_nocache) < 0)
return -1;
- /* performance test with 1, 2 and max cores */
- printf("start performance test (without cache)\n");
- mp = mp_nocache;
-
- if (do_one_mempool_test(1) < 0)
- return -1;
-
- if (do_one_mempool_test(2) < 0)
- return -1;
-
- if (do_one_mempool_test(rte_lcore_count()) < 0)
- return -1;
-
- /* performance test with 1, 2 and max cores */
- printf("start performance test (with cache)\n");
- mp = mp_cache;
-
- if (do_one_mempool_test(1) < 0)
- return -1;
-
- if (do_one_mempool_test(2) < 0)
- return -1;
-
- if (do_one_mempool_test(rte_lcore_count()) < 0)
- return -1;
-
/* mempool operation test based on single producer and single comsumer */
if (test_mempool_sp_sc() < 0)
return -1;