-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
*/
#include <stdio.h>
#include <rte_log.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
-#include <rte_memzone.h>
-#include <rte_tailq.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_cycles.h>
#include <rte_prefetch.h>
#include <rte_lcore.h>
-#include <rte_per_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
.ring_tx_size = 128,
/* Buffer pool */
- .pool_buffer_size = 2048 + sizeof(struct rte_mbuf) +
- RTE_PKTMBUF_HEADROOM,
+ .pool_buffer_size = 2048 + RTE_PKTMBUF_HEADROOM,
.pool_size = 32 * 1024,
.pool_cache_size = 256,
static struct rte_eth_conf port_conf = {
.rxmode = {
.split_hdr_size = 0,
- .header_split = 0, /* Header Split disabled */
- .hw_ip_checksum = 1, /* IP checksum offload enabled */
- .hw_vlan_filter = 0, /* VLAN filtering disabled */
- .jumbo_frame = 0, /* Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /* CRC stripped by hardware */
+ .offloads = DEV_RX_OFFLOAD_CHECKSUM,
},
.rx_adv_conf = {
.rss_conf = {
.rss_key = NULL,
- .rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6,
+ .rss_hf = ETH_RSS_IP,
},
},
.txmode = {
{
/* Init the buffer pool */
RTE_LOG(INFO, USER1, "Creating the mbuf pool ...\n");
- app.pool = rte_mempool_create(
- "mempool",
- app.pool_size,
- app.pool_buffer_size,
- app.pool_cache_size,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(),
- 0);
+ app.pool = rte_pktmbuf_pool_create("mempool", app.pool_size,
+ app.pool_cache_size, 0, app.pool_buffer_size, rte_socket_id());
if (app.pool == NULL)
rte_panic("Cannot create mbuf pool\n");
}
for (i = 0; i < app.n_ports; i++) {
struct rte_eth_link link;
- uint8_t port;
+ uint16_t port;
+ int ret;
- port = (uint8_t) app.ports[i];
+ port = app.ports[i];
memset(&link, 0, sizeof(link));
- rte_eth_link_get_nowait(port, &link);
+ ret = rte_eth_link_get_nowait(port, &link);
+ if (ret < 0) {
+ RTE_LOG(INFO, USER1,
+ "Failed to get port %u link status: %s\n",
+ port, rte_strerror(-ret));
+ all_ports_up = 0;
+ continue;
+ }
+
RTE_LOG(INFO, USER1, "Port %u (%u Gbps) %s\n",
port,
link.link_speed / 1000,
link.link_status ? "UP" : "DOWN");
- if (link.link_status == 0)
+ if (link.link_status == ETH_LINK_DOWN)
all_ports_up = 0;
}
{
uint32_t i;
- /* Init driver */
- RTE_LOG(INFO, USER1, "Initializing the PMD driver ...\n");
- if (rte_eal_pci_probe() < 0)
- rte_panic("Cannot probe PCI\n");
-
/* Init NIC ports, then start the ports */
for (i = 0; i < app.n_ports; i++) {
- uint8_t port;
+ uint16_t port;
int ret;
- port = (uint8_t) app.ports[i];
+ port = app.ports[i];
RTE_LOG(INFO, USER1, "Initializing NIC port %u ...\n", port);
/* Init port */
if (ret < 0)
rte_panic("Cannot init NIC port %u (%d)\n", port, ret);
- rte_eth_promiscuous_enable(port);
+ ret = rte_eth_promiscuous_enable(port);
+ if (ret != 0)
+ rte_panic("Cannot enable promiscuous mode for port %u: %s\n",
+ port, rte_strerror(-ret));
/* Init RX queues */
ret = rte_eth_rx_queue_setup(
git.droids-corp.org / dpdk.git / blobdiff