app/bbdev: fix HARQ error messages
[dpdk.git] / app / test-pmd / cmdline.c
index d282c7c..0268b18 100644 (file)
@@ -258,6 +258,9 @@ static void cmd_help_long_parsed(void *parsed_result,
 
                        "show port (port_id) fec_mode"
                        "       Show fec mode of a port.\n\n"
+
+                       "show port (port_id) flow_ctrl"
+                       "       Show flow control info of a port.\n\n"
                );
        }
 
@@ -705,9 +708,8 @@ static void cmd_help_long_parsed(void *parsed_result,
                        "del port meter profile (port_id) (profile_id)\n"
                        "    meter profile delete\n\n"
 
-                       "create port meter (port_id) (mtr_id) (profile_id) (meter_enable)\n"
-                       "(g_action) (y_action) (r_action) (stats_mask) (shared)\n"
-                       "(use_pre_meter_color) [(dscp_tbl_entry0) (dscp_tbl_entry1)...\n"
+                       "create port meter (port_id) (mtr_id) (profile_id) (policy_id) (meter_enable)\n"
+                       "(stats_mask) (shared) (use_pre_meter_color) [(dscp_tbl_entry0) (dscp_tbl_entry1)...\n"
                        "(dscp_tbl_entry63)]\n"
                        "    meter create\n\n"
 
@@ -720,6 +722,13 @@ static void cmd_help_long_parsed(void *parsed_result,
                        "del port meter (port_id) (mtr_id)\n"
                        "    meter delete\n\n"
 
+                       "add port meter policy (port_id) (policy_id) g_actions (actions)\n"
+                       "y_actions (actions) r_actions (actions)\n"
+                       "    meter policy add\n\n"
+
+                       "del port meter policy (port_id) (policy_id)\n"
+                       "    meter policy delete\n\n"
+
                        "set port meter profile (port_id) (mtr_id) (profile_id)\n"
                        "    meter update meter profile\n\n"
 
@@ -902,6 +911,9 @@ static void cmd_help_long_parsed(void *parsed_result,
                        "    Register a dynf and Set/clear this flag on Tx. "
                        "Testpmd will set this value to any Tx packet "
                        "sent from this port\n\n"
+
+                       "port cleanup (port_id) txq (queue_id) (free_cnt)\n"
+                       "    Cleanup txq mbufs for a specific Tx queue\n\n"
                );
        }
 
@@ -2452,6 +2464,90 @@ cmdline_parse_inst_t cmd_config_rss_hash_key = {
        },
 };
 
+/* *** cleanup txq mbufs *** */
+struct cmd_cleanup_txq_mbufs_result {
+       cmdline_fixed_string_t port;
+       cmdline_fixed_string_t keyword;
+       cmdline_fixed_string_t name;
+       uint16_t port_id;
+       uint16_t queue_id;
+       uint32_t free_cnt;
+};
+
+static void
+cmd_cleanup_txq_mbufs_parsed(void *parsed_result,
+                            __rte_unused struct cmdline *cl,
+                            __rte_unused void *data)
+{
+       struct cmd_cleanup_txq_mbufs_result *res = parsed_result;
+       uint16_t port_id = res->port_id;
+       uint16_t queue_id = res->queue_id;
+       uint32_t free_cnt = res->free_cnt;
+       struct rte_eth_txq_info qinfo;
+       int ret;
+
+       if (test_done == 0) {
+               printf("Please stop forwarding first\n");
+               return;
+       }
+
+       if (rte_eth_tx_queue_info_get(port_id, queue_id, &qinfo)) {
+               printf("Failed to get port %u Tx queue %u info\n",
+                      port_id, queue_id);
+               return;
+       }
+
+       if (qinfo.queue_state != RTE_ETH_QUEUE_STATE_STARTED) {
+               printf("Tx queue %u not started\n", queue_id);
+               return;
+       }
+
+       ret = rte_eth_tx_done_cleanup(port_id, queue_id, free_cnt);
+       if (ret < 0) {
+               printf("Failed to cleanup mbuf for port %u Tx queue %u "
+                      "error desc: %s(%d)\n",
+                      port_id, queue_id, strerror(-ret), ret);
+               return;
+       }
+
+       printf("Cleanup port %u Tx queue %u mbuf nums: %u\n",
+              port_id, queue_id, ret);
+}
+
+cmdline_parse_token_string_t cmd_cleanup_txq_mbufs_port =
+       TOKEN_STRING_INITIALIZER(struct cmd_cleanup_txq_mbufs_result, port,
+                                "port");
+cmdline_parse_token_string_t cmd_cleanup_txq_mbufs_cleanup =
+       TOKEN_STRING_INITIALIZER(struct cmd_cleanup_txq_mbufs_result, keyword,
+                                "cleanup");
+cmdline_parse_token_num_t cmd_cleanup_txq_mbufs_port_id =
+       TOKEN_NUM_INITIALIZER(struct cmd_cleanup_txq_mbufs_result, port_id,
+                             RTE_UINT16);
+cmdline_parse_token_string_t cmd_cleanup_txq_mbufs_txq =
+       TOKEN_STRING_INITIALIZER(struct cmd_cleanup_txq_mbufs_result, name,
+                                "txq");
+cmdline_parse_token_num_t cmd_cleanup_txq_mbufs_queue_id =
+       TOKEN_NUM_INITIALIZER(struct cmd_cleanup_txq_mbufs_result, queue_id,
+                             RTE_UINT16);
+cmdline_parse_token_num_t cmd_cleanup_txq_mbufs_free_cnt =
+       TOKEN_NUM_INITIALIZER(struct cmd_cleanup_txq_mbufs_result, free_cnt,
+                             RTE_UINT32);
+
+cmdline_parse_inst_t cmd_cleanup_txq_mbufs = {
+       .f = cmd_cleanup_txq_mbufs_parsed,
+       .data = NULL,
+       .help_str = "port cleanup <port_id> txq <queue_id> <free_cnt>",
+       .tokens = {
+               (void *)&cmd_cleanup_txq_mbufs_port,
+               (void *)&cmd_cleanup_txq_mbufs_cleanup,
+               (void *)&cmd_cleanup_txq_mbufs_port_id,
+               (void *)&cmd_cleanup_txq_mbufs_txq,
+               (void *)&cmd_cleanup_txq_mbufs_queue_id,
+               (void *)&cmd_cleanup_txq_mbufs_free_cnt,
+               NULL,
+       },
+};
+
 /* *** configure port rxq/txq ring size *** */
 struct cmd_config_rxtx_ring_size {
        cmdline_fixed_string_t port;
@@ -2814,6 +2910,10 @@ cmd_setup_rxtx_queue_parsed(
                if (!numa_support || socket_id == NUMA_NO_CONFIG)
                        socket_id = port->socket_id;
 
+               if (port->nb_tx_desc[res->qid] < tx_pkt_nb_segs) {
+                       printf("Failed to setup TX queue: not enough descriptors\n");
+                       return;
+               }
                ret = rte_eth_tx_queue_setup(res->portid,
                                             res->qid,
                                             port->nb_tx_desc[res->qid],
@@ -3170,6 +3270,7 @@ cmd_config_dcb_parsed(void *parsed_result,
                         __rte_unused void *data)
 {
        struct cmd_config_dcb *res = parsed_result;
+       struct rte_eth_dcb_info dcb_info;
        portid_t port_id = res->port_id;
        struct rte_port *port;
        uint8_t pfc_en;
@@ -3192,6 +3293,14 @@ cmd_config_dcb_parsed(void *parsed_result,
                printf("nb_cores shouldn't be less than number of TCs.\n");
                return;
        }
+
+       /* Check whether the port supports the report of DCB info. */
+       ret = rte_eth_dev_get_dcb_info(port_id, &dcb_info);
+       if (ret == -ENOTSUP) {
+               printf("rte_eth_dev_get_dcb_info not supported.\n");
+               return;
+       }
+
        if (!strncmp(res->pfc_en, "on", 2))
                pfc_en = 1;
        else
@@ -3206,13 +3315,13 @@ cmd_config_dcb_parsed(void *parsed_result,
                ret = init_port_dcb_config(port_id, DCB_ENABLED,
                                (enum rte_eth_nb_tcs)res->num_tcs,
                                pfc_en);
-
-
        if (ret != 0) {
                printf("Cannot initialize network ports.\n");
                return;
        }
 
+       fwd_config_setup();
+
        cmd_reconfig_device_queue(port_id, 1, 1);
 }
 
@@ -4570,7 +4679,7 @@ cmd_config_queue_tx_offloads(struct rte_port *port)
        int k;
 
        /* Apply queue tx offloads configuration */
-       for (k = 0; k < port->dev_info.max_rx_queues; k++)
+       for (k = 0; k < port->dev_info.max_tx_queues; k++)
                port->tx_conf[k].offloads =
                        port->dev_conf.txmode.offloads;
 }
@@ -6863,6 +6972,80 @@ cmdline_parse_inst_t cmd_set_allmulti_mode_one = {
        },
 };
 
+/* *** GET CURRENT ETHERNET LINK FLOW CONTROL *** */
+struct cmd_link_flow_ctrl_show {
+       cmdline_fixed_string_t show;
+       cmdline_fixed_string_t port;
+       portid_t port_id;
+       cmdline_fixed_string_t flow_ctrl;
+};
+
+cmdline_parse_token_string_t cmd_lfc_show_show =
+       TOKEN_STRING_INITIALIZER(struct cmd_link_flow_ctrl_show,
+                               show, "show");
+cmdline_parse_token_string_t cmd_lfc_show_port =
+       TOKEN_STRING_INITIALIZER(struct cmd_link_flow_ctrl_show,
+                               port, "port");
+cmdline_parse_token_num_t cmd_lfc_show_portid =
+       TOKEN_NUM_INITIALIZER(struct cmd_link_flow_ctrl_show,
+                               port_id, RTE_UINT16);
+cmdline_parse_token_string_t cmd_lfc_show_flow_ctrl =
+       TOKEN_STRING_INITIALIZER(struct cmd_link_flow_ctrl_show,
+                               flow_ctrl, "flow_ctrl");
+
+static void
+cmd_link_flow_ctrl_show_parsed(void *parsed_result,
+                             __rte_unused struct cmdline *cl,
+                             __rte_unused void *data)
+{
+       struct cmd_link_flow_ctrl_show *res = parsed_result;
+       static const char *info_border = "*********************";
+       struct rte_eth_fc_conf fc_conf;
+       bool rx_fc_en = false;
+       bool tx_fc_en = false;
+       int ret;
+
+       ret = rte_eth_dev_flow_ctrl_get(res->port_id, &fc_conf);
+       if (ret != 0) {
+               printf("Failed to get current flow ctrl information: err = %d\n",
+                      ret);
+               return;
+       }
+
+       if (fc_conf.mode == RTE_FC_RX_PAUSE || fc_conf.mode == RTE_FC_FULL)
+               rx_fc_en = true;
+       if (fc_conf.mode == RTE_FC_TX_PAUSE || fc_conf.mode == RTE_FC_FULL)
+               tx_fc_en = true;
+
+       printf("\n%s Flow control infos for port %-2d %s\n",
+               info_border, res->port_id, info_border);
+       printf("FC mode:\n");
+       printf("   Rx pause: %s\n", rx_fc_en ? "on" : "off");
+       printf("   Tx pause: %s\n", tx_fc_en ? "on" : "off");
+       printf("Autoneg: %s\n", fc_conf.autoneg ? "on" : "off");
+       printf("Pause time: 0x%x\n", fc_conf.pause_time);
+       printf("High waterline: 0x%x\n", fc_conf.high_water);
+       printf("Low waterline: 0x%x\n", fc_conf.low_water);
+       printf("Send XON: %s\n", fc_conf.send_xon ? "on" : "off");
+       printf("Forward MAC control frames: %s\n",
+               fc_conf.mac_ctrl_frame_fwd ? "on" : "off");
+       printf("\n%s**************   End  ***********%s\n",
+               info_border, info_border);
+}
+
+cmdline_parse_inst_t cmd_link_flow_control_show = {
+       .f = cmd_link_flow_ctrl_show_parsed,
+       .data = NULL,
+       .help_str = "show port <port_id> flow_ctrl",
+       .tokens = {
+               (void *)&cmd_lfc_show_show,
+               (void *)&cmd_lfc_show_port,
+               (void *)&cmd_lfc_show_portid,
+               (void *)&cmd_lfc_show_flow_ctrl,
+               NULL,
+       },
+};
+
 /* *** SETUP ETHERNET LINK FLOW CONTROL *** */
 struct cmd_link_flow_ctrl_set_result {
        cmdline_fixed_string_t set;
@@ -9557,7 +9740,7 @@ dump_socket_mem(FILE *f)
        fprintf(f,
                "Total   : size(M) total: %.6lf alloc: %.6lf(%.3lf%%) free: %.6lf \tcount alloc: %-4u free: %u\n",
                (double)total / (1024 * 1024), (double)alloc / (1024 * 1024),
-               (double)alloc * 100 / (double)total,
+               total ? ((double)alloc * 100 / (double)total) : 0,
                (double)free / (1024 * 1024),
                n_alloc, n_free);
        if (last_allocs)
@@ -17354,6 +17537,7 @@ cmdline_parse_ctx_t main_ctx[] = {
        (cmdline_parse_inst_t *)&cmd_link_flow_control_set_xon,
        (cmdline_parse_inst_t *)&cmd_link_flow_control_set_macfwd,
        (cmdline_parse_inst_t *)&cmd_link_flow_control_set_autoneg,
+       (cmdline_parse_inst_t *)&cmd_link_flow_control_show,
        (cmdline_parse_inst_t *)&cmd_priority_flow_control_set,
        (cmdline_parse_inst_t *)&cmd_config_dcb,
        (cmdline_parse_inst_t *)&cmd_read_reg,
@@ -17407,6 +17591,7 @@ cmdline_parse_ctx_t main_ctx[] = {
        (cmdline_parse_inst_t *)&cmd_showport_rss_hash,
        (cmdline_parse_inst_t *)&cmd_showport_rss_hash_key,
        (cmdline_parse_inst_t *)&cmd_config_rss_hash_key,
+       (cmdline_parse_inst_t *)&cmd_cleanup_txq_mbufs,
        (cmdline_parse_inst_t *)&cmd_dump,
        (cmdline_parse_inst_t *)&cmd_dump_one,
 #ifdef RTE_NET_I40E
@@ -17425,9 +17610,9 @@ cmdline_parse_ctx_t main_ctx[] = {
        (cmdline_parse_inst_t *)&cmd_enable_port_meter,
        (cmdline_parse_inst_t *)&cmd_disable_port_meter,
        (cmdline_parse_inst_t *)&cmd_del_port_meter,
+       (cmdline_parse_inst_t *)&cmd_del_port_meter_policy,
        (cmdline_parse_inst_t *)&cmd_set_port_meter_profile,
        (cmdline_parse_inst_t *)&cmd_set_port_meter_dscp_table,
-       (cmdline_parse_inst_t *)&cmd_set_port_meter_policer_action,
        (cmdline_parse_inst_t *)&cmd_set_port_meter_stats_mask,
        (cmdline_parse_inst_t *)&cmd_show_port_meter_stats,
        (cmdline_parse_inst_t *)&cmd_mcast_addr,