#include <rte_string_fns.h>
#include <rte_devargs.h>
#include <rte_eth_ctrl.h>
+#include <rte_flow.h>
#include <cmdline_rdline.h>
#include <cmdline_parse.h>
#ifdef RTE_LIBRTE_PMD_BOND
#include <rte_eth_bond.h>
#endif
-
+#ifdef RTE_LIBRTE_IXGBE_PMD
+#include <rte_pmd_ixgbe.h>
+#endif
+#ifdef RTE_LIBRTE_I40E_PMD
+#include <rte_pmd_i40e.h>
+#endif
#include "testpmd.h"
static struct cmdline *testpmd_cl;
static void cmd_reconfig_device_queue(portid_t id, uint8_t dev, uint8_t queue);
-#ifdef RTE_NIC_BYPASS
-uint8_t bypass_is_supported(portid_t port_id);
-#endif
-
/* *** Help command with introduction. *** */
struct cmd_help_brief_result {
cmdline_fixed_string_t help;
cmdline_parse_inst_t cmd_help_brief = {
.f = cmd_help_brief_parsed,
.data = NULL,
- .help_str = "show help",
+ .help_str = "help: Show help",
.tokens = {
(void *)&cmd_help_brief_help,
NULL,
" Set number of packets per burst.\n\n"
"set burst tx delay (microseconds) retry (num)\n"
- " Set the transmit delay time and number of retries"
- " in mac_retry forwarding mode.\n\n"
+ " Set the transmit delay time and number of retries,"
+ " effective when retry is enabled.\n\n"
"set txpkts (x[,y]*)\n"
" Set the length of each segment of TXONLY"
"set portlist (x[,y]*)\n"
" Set the list of forwarding ports.\n\n"
+ "set tx loopback (port_id) (on|off)\n"
+ " Enable or disable tx loopback.\n\n"
+
+#ifdef RTE_LIBRTE_IXGBE_PMD
+ "set all queues drop (port_id) (on|off)\n"
+ " Set drop enable bit for all queues.\n\n"
+
+ "set vf split drop (port_id) (vf_id) (on|off)\n"
+ " Set split drop enable bit for a VF from the PF.\n\n"
+#endif
+
+ "set vf mac antispoof (port_id) (vf_id) (on|off).\n"
+ " Set MAC antispoof for a VF from the PF.\n\n"
+
+#ifdef RTE_LIBRTE_IXGBE_PMD
+ "set macsec offload (port_id) on encrypt (on|off) replay-protect (on|off)\n"
+ " Enable MACsec offload.\n\n"
+
+ "set macsec offload (port_id) off\n"
+ " Disable MACsec offload.\n\n"
+
+ "set macsec sc (tx|rx) (port_id) (mac) (pi)\n"
+ " Configure MACsec secure connection (SC).\n\n"
+
+ "set macsec sa (tx|rx) (port_id) (idx) (an) (pn) (key)\n"
+ " Configure MACsec secure association (SA).\n\n"
+#endif
+
"vlan set strip (on|off) (port_id)\n"
" Set the VLAN strip on a port.\n\n"
"vlan set stripq (on|off) (port_id,queue_id)\n"
" Set the VLAN strip for a queue on a port.\n\n"
+ "set vf vlan stripq (port_id) (vf_id) (on|off)\n"
+ " Set the VLAN strip for all queues in a pool for a VF from the PF.\n\n"
+
+ "set vf vlan insert (port_id) (vf_id) (vlan_id)\n"
+ " Set VLAN insert for a VF from the PF.\n\n"
+
+ "set vf vlan antispoof (port_id) (vf_id) (on|off)\n"
+ " Set VLAN antispoof for a VF from the PF.\n\n"
+
"vlan set filter (on|off) (port_id)\n"
" Set the VLAN filter on a port.\n\n"
"mac_addr add port (port_id) vf (vf_id) (mac_address)\n"
" Add a MAC address for a VF on the port.\n\n"
+ "set vf mac addr (port_id) (vf_id) (XX:XX:XX:XX:XX:XX)\n"
+ " Set the MAC address for a VF from the PF.\n\n"
+
"set port (port_id) uta (mac_address|all) (on|off)\n"
" Add/Remove a or all unicast hash filter(s)"
"from port X.\n\n"
"set allmulti (port_id|all) (on|off)\n"
" Set the allmulti mode on port_id, or all.\n\n"
+ "set vf promisc (port_id) (vf_id) (on|off)\n"
+ " Set unicast promiscuous mode for a VF from the PF.\n\n"
+
+ "set vf allmulti (port_id) (vf_id) (on|off)\n"
+ " Set multicast promiscuous mode for a VF from the PF.\n\n"
+
"set flow_ctrl rx (on|off) tx (on|off) (high_water)"
" (low_water) (pause_time) (send_xon) mac_ctrl_frame_fwd"
" (on|off) autoneg (on|off) (port_id)\n"
" Detach physical or virtual dev by port_id\n\n"
"port config (port_id|all)"
- " speed (10|100|1000|10000|40000|auto)"
+ " speed (10|100|1000|10000|25000|40000|50000|100000|auto)"
" duplex (half|full|auto)\n"
" Set speed and duplex for all ports or port_id\n\n"
"port config all max-pkt-len (value)\n"
" Set the max packet length.\n\n"
- "port config all (crc-strip|rx-cksum|hw-vlan|hw-vlan-filter|"
+ "port config all (crc-strip|scatter|rx-cksum|hw-vlan|hw-vlan-filter|"
"hw-vlan-strip|hw-vlan-extend|drop-en)"
" (on|off)\n"
- " Set crc-strip/rx-checksum/hardware-vlan/drop_en"
+ " Set crc-strip/scatter/rx-checksum/hardware-vlan/drop_en"
" for ports.\n\n"
- "port config all rss (all|ip|tcp|udp|sctp|ether|none)\n"
+ "port config all rss (all|ip|tcp|udp|sctp|ether|port|vxlan|geneve|nvgre|none)\n"
" Set the RSS mode.\n\n"
"port config port-id rss reta (hash,queue)[,(hash,queue)]\n"
" Set flow director IP mask.\n\n"
"flow_director_mask (port_id) mode MAC-VLAN"
- " vlan (vlan_value) mac (mac_value)\n"
+ " vlan (vlan_value)\n"
" Set flow director MAC-VLAN mask.\n\n"
"flow_director_mask (port_id) mode Tunnel"
"sctp-src-port|sctp-dst-port|sctp-veri-tag|none)"
" (select|add)\n"
" Set the input set for FDir.\n\n"
+
+ "flow validate {port_id}"
+ " [group {group_id}] [priority {level}]"
+ " [ingress] [egress]"
+ " pattern {item} [/ {item} [...]] / end"
+ " actions {action} [/ {action} [...]] / end\n"
+ " Check whether a flow rule can be created.\n\n"
+
+ "flow create {port_id}"
+ " [group {group_id}] [priority {level}]"
+ " [ingress] [egress]"
+ " pattern {item} [/ {item} [...]] / end"
+ " actions {action} [/ {action} [...]] / end\n"
+ " Create a flow rule.\n\n"
+
+ "flow destroy {port_id} rule {rule_id} [...]\n"
+ " Destroy specific flow rules.\n\n"
+
+ "flow flush {port_id}\n"
+ " Destroy all flow rules.\n\n"
+
+ "flow query {port_id} {rule_id} {action}\n"
+ " Query an existing flow rule.\n\n"
+
+ "flow list {port_id} [group {group_id}] [...]\n"
+ " List existing flow rules sorted by priority,"
+ " filtered by group identifiers.\n\n"
);
}
}
cmdline_parse_inst_t cmd_help_long = {
.f = cmd_help_long_parsed,
.data = NULL,
- .help_str = "show help",
+ .help_str = "help all|control|display|config|ports|register|filters: "
+ "Show help",
.tokens = {
(void *)&cmd_help_long_help,
(void *)&cmd_help_long_section,
cmdline_parse_inst_t cmd_operate_port = {
.f = cmd_operate_port_parsed,
.data = NULL,
- .help_str = "port start|stop|close all: start/stop/close all ports",
+ .help_str = "port start|stop|close all: Start/Stop/Close all ports",
.tokens = {
(void *)&cmd_operate_port_all_cmd,
(void *)&cmd_operate_port_all_port,
cmdline_parse_inst_t cmd_operate_specific_port = {
.f = cmd_operate_specific_port_parsed,
.data = NULL,
- .help_str = "port start|stop|close X: start/stop/close port X",
+ .help_str = "port start|stop|close <port_id>: Start/Stop/Close port_id",
.tokens = {
(void *)&cmd_operate_specific_port_cmd,
(void *)&cmd_operate_specific_port_port,
cmdline_parse_inst_t cmd_operate_attach_port = {
.f = cmd_operate_attach_port_parsed,
.data = NULL,
- .help_str = "port attach identifier, "
- "identifier: pci address or virtual dev name",
+ .help_str = "port attach <identifier>: "
+ "(identifier: pci address or virtual dev name)",
.tokens = {
(void *)&cmd_operate_attach_port_port,
(void *)&cmd_operate_attach_port_keyword,
cmdline_parse_inst_t cmd_operate_detach_port = {
.f = cmd_operate_detach_port_parsed,
.data = NULL,
- .help_str = "port detach port_id",
+ .help_str = "port detach <port_id>",
.tokens = {
(void *)&cmd_operate_detach_port_port,
(void *)&cmd_operate_detach_port_keyword,
cmdline_fixed_string_t value2;
};
+static int
+parse_and_check_speed_duplex(char *speedstr, char *duplexstr, uint32_t *speed)
+{
+
+ int duplex;
+
+ if (!strcmp(duplexstr, "half")) {
+ duplex = ETH_LINK_HALF_DUPLEX;
+ } else if (!strcmp(duplexstr, "full")) {
+ duplex = ETH_LINK_FULL_DUPLEX;
+ } else if (!strcmp(duplexstr, "auto")) {
+ duplex = ETH_LINK_FULL_DUPLEX;
+ } else {
+ printf("Unknown duplex parameter\n");
+ return -1;
+ }
+
+ if (!strcmp(speedstr, "10")) {
+ *speed = (duplex == ETH_LINK_HALF_DUPLEX) ?
+ ETH_LINK_SPEED_10M_HD : ETH_LINK_SPEED_10M;
+ } else if (!strcmp(speedstr, "100")) {
+ *speed = (duplex == ETH_LINK_HALF_DUPLEX) ?
+ ETH_LINK_SPEED_100M_HD : ETH_LINK_SPEED_100M;
+ } else {
+ if (duplex != ETH_LINK_FULL_DUPLEX) {
+ printf("Invalid speed/duplex parameters\n");
+ return -1;
+ }
+ if (!strcmp(speedstr, "1000")) {
+ *speed = ETH_LINK_SPEED_1G;
+ } else if (!strcmp(speedstr, "10000")) {
+ *speed = ETH_LINK_SPEED_10G;
+ } else if (!strcmp(speedstr, "25000")) {
+ *speed = ETH_LINK_SPEED_25G;
+ } else if (!strcmp(speedstr, "40000")) {
+ *speed = ETH_LINK_SPEED_40G;
+ } else if (!strcmp(speedstr, "50000")) {
+ *speed = ETH_LINK_SPEED_50G;
+ } else if (!strcmp(speedstr, "100000")) {
+ *speed = ETH_LINK_SPEED_100G;
+ } else if (!strcmp(speedstr, "auto")) {
+ *speed = ETH_LINK_SPEED_AUTONEG;
+ } else {
+ printf("Unknown speed parameter\n");
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
static void
cmd_config_speed_all_parsed(void *parsed_result,
__attribute__((unused)) struct cmdline *cl,
__attribute__((unused)) void *data)
{
struct cmd_config_speed_all *res = parsed_result;
- uint16_t link_speed = ETH_LINK_SPEED_AUTONEG;
- uint16_t link_duplex = 0;
+ uint32_t link_speed;
portid_t pid;
if (!all_ports_stopped()) {
return;
}
- if (!strcmp(res->value1, "10"))
- link_speed = ETH_LINK_SPEED_10;
- else if (!strcmp(res->value1, "100"))
- link_speed = ETH_LINK_SPEED_100;
- else if (!strcmp(res->value1, "1000"))
- link_speed = ETH_LINK_SPEED_1000;
- else if (!strcmp(res->value1, "10000"))
- link_speed = ETH_LINK_SPEED_10G;
- else if (!strcmp(res->value1, "40000"))
- link_speed = ETH_LINK_SPEED_40G;
- else if (!strcmp(res->value1, "auto"))
- link_speed = ETH_LINK_SPEED_AUTONEG;
- else {
- printf("Unknown parameter\n");
- return;
- }
-
- if (!strcmp(res->value2, "half"))
- link_duplex = ETH_LINK_HALF_DUPLEX;
- else if (!strcmp(res->value2, "full"))
- link_duplex = ETH_LINK_FULL_DUPLEX;
- else if (!strcmp(res->value2, "auto"))
- link_duplex = ETH_LINK_AUTONEG_DUPLEX;
- else {
- printf("Unknown parameter\n");
+ if (parse_and_check_speed_duplex(res->value1, res->value2,
+ &link_speed) < 0)
return;
- }
FOREACH_PORT(pid, ports) {
- ports[pid].dev_conf.link_speed = link_speed;
- ports[pid].dev_conf.link_duplex = link_duplex;
+ ports[pid].dev_conf.link_speeds = link_speed;
}
cmd_reconfig_device_queue(RTE_PORT_ALL, 1, 1);
TOKEN_STRING_INITIALIZER(struct cmd_config_speed_all, item1, "speed");
cmdline_parse_token_string_t cmd_config_speed_all_value1 =
TOKEN_STRING_INITIALIZER(struct cmd_config_speed_all, value1,
- "10#100#1000#10000#40000#auto");
+ "10#100#1000#10000#25000#40000#50000#100000#auto");
cmdline_parse_token_string_t cmd_config_speed_all_item2 =
TOKEN_STRING_INITIALIZER(struct cmd_config_speed_all, item2, "duplex");
cmdline_parse_token_string_t cmd_config_speed_all_value2 =
cmdline_parse_inst_t cmd_config_speed_all = {
.f = cmd_config_speed_all_parsed,
.data = NULL,
- .help_str = "port config all speed 10|100|1000|10000|40000|auto duplex "
+ .help_str = "port config all speed "
+ "10|100|1000|10000|25000|40000|50000|100000|auto duplex "
"half|full|auto",
.tokens = {
(void *)&cmd_config_speed_all_port,
__attribute__((unused)) void *data)
{
struct cmd_config_speed_specific *res = parsed_result;
- uint16_t link_speed = ETH_LINK_SPEED_AUTONEG;
- uint16_t link_duplex = 0;
+ uint32_t link_speed;
if (!all_ports_stopped()) {
printf("Please stop all ports first\n");
if (port_id_is_invalid(res->id, ENABLED_WARN))
return;
- if (!strcmp(res->value1, "10"))
- link_speed = ETH_LINK_SPEED_10;
- else if (!strcmp(res->value1, "100"))
- link_speed = ETH_LINK_SPEED_100;
- else if (!strcmp(res->value1, "1000"))
- link_speed = ETH_LINK_SPEED_1000;
- else if (!strcmp(res->value1, "10000"))
- link_speed = ETH_LINK_SPEED_10000;
- else if (!strcmp(res->value1, "40000"))
- link_speed = ETH_LINK_SPEED_40G;
- else if (!strcmp(res->value1, "auto"))
- link_speed = ETH_LINK_SPEED_AUTONEG;
- else {
- printf("Unknown parameter\n");
- return;
- }
-
- if (!strcmp(res->value2, "half"))
- link_duplex = ETH_LINK_HALF_DUPLEX;
- else if (!strcmp(res->value2, "full"))
- link_duplex = ETH_LINK_FULL_DUPLEX;
- else if (!strcmp(res->value2, "auto"))
- link_duplex = ETH_LINK_AUTONEG_DUPLEX;
- else {
- printf("Unknown parameter\n");
+ if (parse_and_check_speed_duplex(res->value1, res->value2,
+ &link_speed) < 0)
return;
- }
- ports[res->id].dev_conf.link_speed = link_speed;
- ports[res->id].dev_conf.link_duplex = link_duplex;
+ ports[res->id].dev_conf.link_speeds = link_speed;
cmd_reconfig_device_queue(RTE_PORT_ALL, 1, 1);
}
"speed");
cmdline_parse_token_string_t cmd_config_speed_specific_value1 =
TOKEN_STRING_INITIALIZER(struct cmd_config_speed_specific, value1,
- "10#100#1000#10000#40000#auto");
+ "10#100#1000#10000#25000#40000#50000#100000#auto");
cmdline_parse_token_string_t cmd_config_speed_specific_item2 =
TOKEN_STRING_INITIALIZER(struct cmd_config_speed_specific, item2,
"duplex");
cmdline_parse_inst_t cmd_config_speed_specific = {
.f = cmd_config_speed_specific_parsed,
.data = NULL,
- .help_str = "port config X speed 10|100|1000|10000|40000|auto duplex "
+ .help_str = "port config <port_id> speed "
+ "10|100|1000|10000|25000|40000|50000|100000|auto duplex "
"half|full|auto",
.tokens = {
(void *)&cmd_config_speed_specific_port,
return;
}
+ fwd_config_setup();
+
init_port_config();
cmd_reconfig_device_queue(RTE_PORT_ALL, 1, 1);
cmdline_parse_inst_t cmd_config_rx_tx = {
.f = cmd_config_rx_tx_parsed,
.data = NULL,
- .help_str = "port config all rxq|txq|rxd|txd value",
+ .help_str = "port config all rxq|txq|rxd|txd <value>",
.tokens = {
(void *)&cmd_config_rx_tx_port,
(void *)&cmd_config_rx_tx_keyword,
cmdline_parse_inst_t cmd_config_max_pkt_len = {
.f = cmd_config_max_pkt_len_parsed,
.data = NULL,
- .help_str = "port config all max-pkt-len value",
+ .help_str = "port config all max-pkt-len <value>",
.tokens = {
(void *)&cmd_config_max_pkt_len_port,
(void *)&cmd_config_max_pkt_len_keyword,
cmdline_parse_inst_t cmd_config_mtu = {
.f = cmd_config_mtu_parsed,
.data = NULL,
- .help_str = "port config mtu value",
+ .help_str = "port config mtu <port_id> <value>",
.tokens = {
(void *)&cmd_config_mtu_port,
(void *)&cmd_config_mtu_keyword,
printf("Unknown parameter\n");
return;
}
+ } else if (!strcmp(res->name, "scatter")) {
+ if (!strcmp(res->value, "on"))
+ rx_mode.enable_scatter = 1;
+ else if (!strcmp(res->value, "off"))
+ rx_mode.enable_scatter = 0;
+ else {
+ printf("Unknown parameter\n");
+ return;
+ }
} else if (!strcmp(res->name, "rx-cksum")) {
if (!strcmp(res->value, "on"))
rx_mode.hw_ip_checksum = 1;
TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, all, "all");
cmdline_parse_token_string_t cmd_config_rx_mode_flag_name =
TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, name,
- "crc-strip#rx-cksum#hw-vlan#"
+ "crc-strip#scatter#rx-cksum#hw-vlan#"
"hw-vlan-filter#hw-vlan-strip#hw-vlan-extend");
cmdline_parse_token_string_t cmd_config_rx_mode_flag_value =
TOKEN_STRING_INITIALIZER(struct cmd_config_rx_mode_flag, value,
cmdline_parse_inst_t cmd_config_rx_mode_flag = {
.f = cmd_config_rx_mode_flag_parsed,
.data = NULL,
- .help_str = "port config all crc-strip|rx-cksum|hw-vlan|"
+ .help_str = "port config all crc-strip|scatter|rx-cksum|hw-vlan|"
"hw-vlan-filter|hw-vlan-strip|hw-vlan-extend on|off",
.tokens = {
(void *)&cmd_config_rx_mode_flag_port,
{
struct cmd_config_rss *res = parsed_result;
struct rte_eth_rss_conf rss_conf;
+ int diag;
uint8_t i;
if (!strcmp(res->value, "all"))
rss_conf.rss_hf = ETH_RSS_SCTP;
else if (!strcmp(res->value, "ether"))
rss_conf.rss_hf = ETH_RSS_L2_PAYLOAD;
+ else if (!strcmp(res->value, "port"))
+ rss_conf.rss_hf = ETH_RSS_PORT;
+ else if (!strcmp(res->value, "vxlan"))
+ rss_conf.rss_hf = ETH_RSS_VXLAN;
+ else if (!strcmp(res->value, "geneve"))
+ rss_conf.rss_hf = ETH_RSS_GENEVE;
+ else if (!strcmp(res->value, "nvgre"))
+ rss_conf.rss_hf = ETH_RSS_NVGRE;
else if (!strcmp(res->value, "none"))
rss_conf.rss_hf = 0;
else {
return;
}
rss_conf.rss_key = NULL;
- for (i = 0; i < rte_eth_dev_count(); i++)
- rte_eth_dev_rss_hash_update(i, &rss_conf);
+ for (i = 0; i < rte_eth_dev_count(); i++) {
+ diag = rte_eth_dev_rss_hash_update(i, &rss_conf);
+ if (diag < 0)
+ printf("Configuration of RSS hash at ethernet port %d "
+ "failed with error (%d): %s.\n",
+ i, -diag, strerror(-diag));
+ }
}
cmdline_parse_token_string_t cmd_config_rss_port =
TOKEN_STRING_INITIALIZER(struct cmd_config_rss, name, "rss");
cmdline_parse_token_string_t cmd_config_rss_value =
TOKEN_STRING_INITIALIZER(struct cmd_config_rss, value,
- "all#ip#tcp#udp#sctp#ether#none");
+ "all#ip#tcp#udp#sctp#ether#port#vxlan#geneve#nvgre#none");
cmdline_parse_inst_t cmd_config_rss = {
.f = cmd_config_rss_parsed,
.data = NULL,
- .help_str = "port config all rss all|ip|tcp|udp|sctp|ether|none",
+ .help_str = "port config all rss "
+ "all|ip|tcp|udp|sctp|ether|port|vxlan|geneve|nvgre|none",
.tokens = {
(void *)&cmd_config_rss_port,
(void *)&cmd_config_rss_keyword,
cmdline_fixed_string_t key;
};
-#define RSS_HASH_KEY_LENGTH 40
static uint8_t
hexa_digit_to_value(char hexa_digit)
{
uint8_t xdgt0;
uint8_t xdgt1;
int i;
+ struct rte_eth_dev_info dev_info;
+ uint8_t hash_key_size;
+ uint32_t key_len;
+ memset(&dev_info, 0, sizeof(dev_info));
+ rte_eth_dev_info_get(res->port_id, &dev_info);
+ if (dev_info.hash_key_size > 0 &&
+ dev_info.hash_key_size <= sizeof(hash_key))
+ hash_key_size = dev_info.hash_key_size;
+ else {
+ printf("dev_info did not provide a valid hash key size\n");
+ return;
+ }
/* Check the length of the RSS hash key */
- if (strlen(res->key) != (RSS_HASH_KEY_LENGTH * 2)) {
+ key_len = strlen(res->key);
+ if (key_len != (hash_key_size * 2)) {
printf("key length: %d invalid - key must be a string of %d"
- "hexa-decimal numbers\n", (int) strlen(res->key),
- RSS_HASH_KEY_LENGTH * 2);
+ " hexa-decimal numbers\n",
+ (int) key_len, hash_key_size * 2);
return;
}
/* Translate RSS hash key into binary representation */
- for (i = 0; i < RSS_HASH_KEY_LENGTH; i++) {
+ for (i = 0; i < hash_key_size; i++) {
xdgt0 = parse_and_check_key_hexa_digit(res->key, (i * 2));
if (xdgt0 == 0xFF)
return;
hash_key[i] = (uint8_t) ((xdgt0 * 16) + xdgt1);
}
port_rss_hash_key_update(res->port_id, res->rss_type, hash_key,
- RSS_HASH_KEY_LENGTH);
+ hash_key_size);
}
cmdline_parse_token_string_t cmd_config_rss_hash_key_port =
cmdline_parse_inst_t cmd_config_rss_hash_key = {
.f = cmd_config_rss_hash_key_parsed,
.data = NULL,
- .help_str =
- "port config X rss-hash-key ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|"
- "ipv4-sctp|ipv4-other|ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|"
- "ipv6-sctp|ipv6-other|l2-payload|"
- "ipv6-ex|ipv6-tcp-ex|ipv6-udp-ex 80 hexa digits\n",
+ .help_str = "port config <port_id> rss-hash-key "
+ "ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|"
+ "ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|"
+ "l2-payload|ipv6-ex|ipv6-tcp-ex|ipv6-udp-ex "
+ "<string of hex digits (variable length, NIC dependent)>",
.tokens = {
(void *)&cmd_config_rss_hash_key_port,
(void *)&cmd_config_rss_hash_key_config,
cmdline_parse_inst_t cmd_config_rxtx_queue = {
.f = cmd_config_rxtx_queue_parsed,
.data = NULL,
- .help_str = "port X rxq|txq ID start|stop",
+ .help_str = "port <port_id> rxq|txq <queue_id> start|stop",
.tokens = {
(void *)&cmd_config_speed_all_port,
(void *)&cmd_config_rxtx_queue_portid,
cmdline_parse_inst_t cmd_config_rss_reta = {
.f = cmd_set_rss_reta_parsed,
.data = NULL,
- .help_str = "port config X rss reta (hash,queue)[,(hash,queue)]",
+ .help_str = "port config <port_id> rss reta <hash,queue[,hash,queue]*>",
.tokens = {
(void *)&cmd_config_rss_reta_port,
(void *)&cmd_config_rss_reta_keyword,
cmdline_parse_inst_t cmd_showport_reta = {
.f = cmd_showport_reta_parsed,
.data = NULL,
- .help_str = "show port X rss reta (size) (mask0,mask1,...)",
+ .help_str = "show port <port_id> rss reta <size> <mask0[,mask1]*>",
.tokens = {
(void *)&cmd_showport_reta_show,
(void *)&cmd_showport_reta_port,
cmdline_parse_inst_t cmd_showport_rss_hash = {
.f = cmd_showport_rss_hash_parsed,
.data = NULL,
- .help_str =
- "show port X rss-hash ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|"
- "ipv4-sctp|ipv4-other|ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|"
- "ipv6-sctp|ipv6-other|l2-payload|"
- "ipv6-ex|ipv6-tcp-ex|ipv6-udp-ex (X = port number)\n",
+ .help_str = "show port <port_id> rss-hash "
+ "ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|"
+ "ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|"
+ "l2-payload|ipv6-ex|ipv6-tcp-ex|ipv6-udp-ex",
.tokens = {
(void *)&cmd_showport_rss_hash_show,
(void *)&cmd_showport_rss_hash_port,
cmdline_parse_inst_t cmd_showport_rss_hash_key = {
.f = cmd_showport_rss_hash_parsed,
.data = (void *)1,
- .help_str =
- "show port X rss-hash ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|"
- "ipv4-sctp|ipv4-other|ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|"
- "ipv6-sctp|ipv6-other|l2-payload|"
- "ipv6-ex|ipv6-tcp-ex|ipv6-udp-ex key (X = port number)\n",
+ .help_str = "show port <port_id> rss-hash "
+ "ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|"
+ "ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|"
+ "l2-payload|ipv6-ex|ipv6-tcp-ex|ipv6-udp-ex key",
.tokens = {
(void *)&cmd_showport_rss_hash_show,
(void *)&cmd_showport_rss_hash_port,
TOKEN_STRING_INITIALIZER(struct cmd_config_dcb, pfc_en, "on#off");
cmdline_parse_inst_t cmd_config_dcb = {
- .f = cmd_config_dcb_parsed,
- .data = NULL,
- .help_str = "port config port-id dcb vt on|off nb-tcs pfc on|off",
- .tokens = {
+ .f = cmd_config_dcb_parsed,
+ .data = NULL,
+ .help_str = "port config <port-id> dcb vt on|off <num_tcs> pfc on|off",
+ .tokens = {
(void *)&cmd_config_dcb_port,
(void *)&cmd_config_dcb_config,
(void *)&cmd_config_dcb_port_id,
cmdline_parse_inst_t cmd_config_burst = {
.f = cmd_config_burst_parsed,
.data = NULL,
- .help_str = "port config all burst value",
+ .help_str = "port config all burst <value>",
.tokens = {
(void *)&cmd_config_burst_port,
(void *)&cmd_config_burst_keyword,
cmdline_parse_inst_t cmd_config_thresh = {
.f = cmd_config_thresh_parsed,
.data = NULL,
- .help_str = "port config all txpt|txht|txwt|rxpt|rxht|rxwt value",
+ .help_str = "port config all txpt|txht|txwt|rxpt|rxht|rxwt <value>",
.tokens = {
(void *)&cmd_config_thresh_port,
(void *)&cmd_config_thresh_keyword,
cmdline_parse_inst_t cmd_config_threshold = {
.f = cmd_config_threshold_parsed,
.data = NULL,
- .help_str = "port config all txfreet|txrst|rxfreet value",
+ .help_str = "port config all txfreet|txrst|rxfreet <value>",
.tokens = {
(void *)&cmd_config_threshold_port,
(void *)&cmd_config_threshold_keyword,
cmdline_parse_inst_t cmd_stop = {
.f = cmd_stop_parsed,
.data = NULL,
- .help_str = "stop - stop packet forwarding",
+ .help_str = "stop: Stop packet forwarding",
.tokens = {
(void *)&cmd_stop_stop,
NULL,
nb_item = parse_item_list(res->list_of_items, "core",
RTE_MAX_LCORE,
parsed_items.lcorelist, 1);
- if (nb_item > 0)
+ if (nb_item > 0) {
set_fwd_lcores_list(parsed_items.lcorelist, nb_item);
+ fwd_config_setup();
+ }
return;
}
if (!strcmp(res->list_name, "portlist")) {
nb_item = parse_item_list(res->list_of_items, "port",
RTE_MAX_ETHPORTS,
parsed_items.portlist, 1);
- if (nb_item > 0)
+ if (nb_item > 0) {
set_fwd_ports_list(parsed_items.portlist, nb_item);
+ fwd_config_setup();
+ }
}
}
cmdline_parse_inst_t cmd_set_fwd_list = {
.f = cmd_set_list_parsed,
.data = NULL,
- .help_str = "set corelist|portlist x[,y]*",
+ .help_str = "set corelist|portlist <list0[,list1]*>",
.tokens = {
(void *)&cmd_set_list_keyword,
(void *)&cmd_set_list_name,
printf("Please stop forwarding first\n");
return;
}
- if (!strcmp(res->mask, "coremask"))
+ if (!strcmp(res->mask, "coremask")) {
set_fwd_lcores_mask(res->hexavalue);
- else if (!strcmp(res->mask, "portmask"))
+ fwd_config_setup();
+ } else if (!strcmp(res->mask, "portmask")) {
set_fwd_ports_mask(res->hexavalue);
+ fwd_config_setup();
+ }
}
cmdline_parse_token_string_t cmd_setmask_set =
cmdline_parse_inst_t cmd_set_fwd_mask = {
.f = cmd_set_mask_parsed,
.data = NULL,
- .help_str = "set coremask|portmask hexadecimal value",
+ .help_str = "set coremask|portmask <hexadecimal value>",
.tokens = {
(void *)&cmd_setmask_set,
(void *)&cmd_setmask_mask,
__attribute__((unused)) void *data)
{
struct cmd_set_result *res = parsed_result;
- if (!strcmp(res->what, "nbport"))
+ if (!strcmp(res->what, "nbport")) {
set_fwd_ports_number(res->value);
- else if (!strcmp(res->what, "nbcore"))
+ fwd_config_setup();
+ } else if (!strcmp(res->what, "nbcore")) {
set_fwd_lcores_number(res->value);
- else if (!strcmp(res->what, "burst"))
+ fwd_config_setup();
+ } else if (!strcmp(res->what, "burst"))
set_nb_pkt_per_burst(res->value);
else if (!strcmp(res->what, "verbose"))
set_verbose_level(res->value);
cmdline_parse_inst_t cmd_set_numbers = {
.f = cmd_set_parsed,
.data = NULL,
- .help_str = "set nbport|nbcore|burst|verbose value",
+ .help_str = "set nbport|nbcore|burst|verbose <value>",
.tokens = {
(void *)&cmd_set_set,
(void *)&cmd_set_what,
cmdline_parse_inst_t cmd_set_txpkts = {
.f = cmd_set_txpkts_parsed,
.data = NULL,
- .help_str = "set txpkts x[,y]*",
+ .help_str = "set txpkts <len0[,len1]*>",
.tokens = {
(void *)&cmd_set_txpkts_keyword,
(void *)&cmd_set_txpkts_name,
},
};
+/* *** CONFIG TX QUEUE FLAGS *** */
+
+struct cmd_config_txqflags_result {
+ cmdline_fixed_string_t port;
+ cmdline_fixed_string_t config;
+ cmdline_fixed_string_t all;
+ cmdline_fixed_string_t what;
+ int32_t hexvalue;
+};
+
+static void cmd_config_txqflags_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_config_txqflags_result *res = parsed_result;
+
+ if (!all_ports_stopped()) {
+ printf("Please stop all ports first\n");
+ return;
+ }
+
+ if (strcmp(res->what, "txqflags")) {
+ printf("Unknown parameter\n");
+ return;
+ }
+
+ if (res->hexvalue >= 0) {
+ txq_flags = res->hexvalue;
+ } else {
+ printf("txqflags must be >= 0\n");
+ return;
+ }
+
+ init_port_config();
+
+ cmd_reconfig_device_queue(RTE_PORT_ALL, 1, 1);
+}
+
+cmdline_parse_token_string_t cmd_config_txqflags_port =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_txqflags_result, port,
+ "port");
+cmdline_parse_token_string_t cmd_config_txqflags_config =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_txqflags_result, config,
+ "config");
+cmdline_parse_token_string_t cmd_config_txqflags_all =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_txqflags_result, all,
+ "all");
+cmdline_parse_token_string_t cmd_config_txqflags_what =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_txqflags_result, what,
+ "txqflags");
+cmdline_parse_token_num_t cmd_config_txqflags_value =
+ TOKEN_NUM_INITIALIZER(struct cmd_config_txqflags_result,
+ hexvalue, INT32);
+
+cmdline_parse_inst_t cmd_config_txqflags = {
+ .f = cmd_config_txqflags_parsed,
+ .data = NULL,
+ .help_str = "port config all txqflags <value>",
+ .tokens = {
+ (void *)&cmd_config_txqflags_port,
+ (void *)&cmd_config_txqflags_config,
+ (void *)&cmd_config_txqflags_all,
+ (void *)&cmd_config_txqflags_what,
+ (void *)&cmd_config_txqflags_value,
+ NULL,
+ },
+};
+
/* *** ADD/REMOVE ALL VLAN IDENTIFIERS TO/FROM A PORT VLAN RX FILTER *** */
struct cmd_rx_vlan_filter_all_result {
cmdline_fixed_string_t rx_vlan;
cmdline_parse_inst_t cmd_rx_vlan_filter_all = {
.f = cmd_rx_vlan_filter_all_parsed,
.data = NULL,
- .help_str = "add/remove all identifiers to/from the set of VLAN "
- "Identifiers filtered by a port",
+ .help_str = "rx_vlan add|rm all <port_id>: "
+ "Add/Remove all identifiers to/from the set of VLAN "
+ "identifiers filtered by a port",
.tokens = {
(void *)&cmd_rx_vlan_filter_all_rx_vlan,
(void *)&cmd_rx_vlan_filter_all_what,
cmdline_parse_inst_t cmd_vlan_offload = {
.f = cmd_vlan_offload_parsed,
.data = NULL,
- .help_str = "set strip|filter|qinq|stripq on|off port_id[,queue_id], filter/strip for rx side"
- " qinq(extended) for both rx/tx sides ",
+ .help_str = "vlan set strip|filter|qinq|stripq on|off "
+ "<port_id[,queue_id]>: "
+ "Filter/Strip for rx side qinq(extended) for both rx/tx sides",
.tokens = {
(void *)&cmd_vlan_offload_vlan,
(void *)&cmd_vlan_offload_set,
cmdline_parse_inst_t cmd_vlan_tpid = {
.f = cmd_vlan_tpid_parsed,
.data = NULL,
- .help_str = "set inner|outer tpid tp_id port_id, set the VLAN "
- "Ether type",
+ .help_str = "vlan set inner|outer tpid <tp_id> <port_id>: "
+ "Set the VLAN Ether type",
.tokens = {
(void *)&cmd_vlan_tpid_vlan,
(void *)&cmd_vlan_tpid_set,
cmdline_parse_inst_t cmd_rx_vlan_filter = {
.f = cmd_rx_vlan_filter_parsed,
.data = NULL,
- .help_str = "add/remove a VLAN identifier to/from the set of VLAN "
- "Identifiers filtered by a port",
+ .help_str = "rx_vlan add|rm <vlan_id> <port_id>: "
+ "Add/Remove a VLAN identifier to/from the set of VLAN "
+ "identifiers filtered by a port",
.tokens = {
(void *)&cmd_rx_vlan_filter_rx_vlan,
(void *)&cmd_rx_vlan_filter_what,
cmdline_parse_inst_t cmd_tx_vlan_set = {
.f = cmd_tx_vlan_set_parsed,
.data = NULL,
- .help_str = "enable hardware insertion of a single VLAN header "
+ .help_str = "tx_vlan set <port_id> <vlan_id>: "
+ "Enable hardware insertion of a single VLAN header "
"with a given TAG Identifier in packets sent on a port",
.tokens = {
(void *)&cmd_tx_vlan_set_tx_vlan,
cmdline_parse_inst_t cmd_tx_vlan_set_qinq = {
.f = cmd_tx_vlan_set_qinq_parsed,
.data = NULL,
- .help_str = "enable hardware insertion of double VLAN header "
+ .help_str = "tx_vlan set <port_id> <vlan_id> <outer_vlan_id>: "
+ "Enable hardware insertion of double VLAN header "
"with given TAG Identifiers in packets sent on a port",
.tokens = {
(void *)&cmd_tx_vlan_set_qinq_tx_vlan,
cmdline_parse_inst_t cmd_tx_vlan_set_pvid = {
.f = cmd_tx_vlan_set_pvid_parsed,
.data = NULL,
- .help_str = "tx_vlan set pvid port_id vlan_id (on|off)",
+ .help_str = "tx_vlan set pvid <port_id> <vlan_id> on|off",
.tokens = {
(void *)&cmd_tx_vlan_set_pvid_tx_vlan,
(void *)&cmd_tx_vlan_set_pvid_set,
cmdline_parse_inst_t cmd_tx_vlan_reset = {
.f = cmd_tx_vlan_reset_parsed,
.data = NULL,
- .help_str = "disable hardware insertion of a VLAN header in packets "
- "sent on a port",
+ .help_str = "tx_vlan reset <port_id>: Disable hardware insertion of a "
+ "VLAN header in packets sent on a port",
.tokens = {
(void *)&cmd_tx_vlan_reset_tx_vlan,
(void *)&cmd_tx_vlan_reset_reset,
cmdline_parse_inst_t cmd_csum_set = {
.f = cmd_csum_parsed,
.data = NULL,
- .help_str = "enable/disable hardware calculation of L3/L4 checksum when "
- "using csum forward engine: csum set ip|tcp|udp|sctp|outer-ip hw|sw <port>",
+ .help_str = "csum set ip|tcp|udp|sctp|outer-ip hw|sw <port_id>: "
+ "Enable/Disable hardware calculation of L3/L4 checksum when "
+ "using csum forward engine",
.tokens = {
(void *)&cmd_csum_csum,
(void *)&cmd_csum_mode,
cmdline_parse_inst_t cmd_csum_show = {
.f = cmd_csum_parsed,
.data = NULL,
- .help_str = "show checksum offload configuration: csum show <port>",
+ .help_str = "csum show <port_id>: Show checksum offload configuration",
.tokens = {
(void *)&cmd_csum_csum,
(void *)&cmd_csum_mode_show,
cmdline_parse_inst_t cmd_csum_tunnel = {
.f = cmd_csum_tunnel_parsed,
.data = NULL,
- .help_str = "enable/disable parsing of tunnels for csum engine: "
- "csum parse_tunnel on|off <tx-port>",
+ .help_str = "csum parse_tunnel on|off <port_id>: "
+ "Enable/Disable parsing of tunnels for csum engine",
.tokens = {
(void *)&cmd_csum_tunnel_csum,
(void *)&cmd_csum_tunnel_parse,
},
};
-/* *** ENABLE HARDWARE SEGMENTATION IN TX PACKETS *** */
+/* *** ENABLE HARDWARE SEGMENTATION IN TX NON-TUNNELED PACKETS *** */
struct cmd_tso_set_result {
cmdline_fixed_string_t tso;
cmdline_fixed_string_t mode;
ports[res->port_id].tso_segsz = res->tso_segsz;
if (ports[res->port_id].tso_segsz == 0)
- printf("TSO is disabled\n");
+ printf("TSO for non-tunneled packets is disabled\n");
else
- printf("TSO segment size is %d\n",
+ printf("TSO segment size for non-tunneled packets is %d\n",
ports[res->port_id].tso_segsz);
/* display warnings if configuration is not supported by the NIC */
cmdline_parse_inst_t cmd_tso_set = {
.f = cmd_tso_set_parsed,
.data = NULL,
- .help_str = "Set TSO segment size for csum engine (0 to disable): "
- "tso set <tso_segsz> <port>",
+ .help_str = "tso set <tso_segsz> <port_id>: "
+ "Set TSO segment size of non-tunneled packets for csum engine "
+ "(0 to disable)",
.tokens = {
(void *)&cmd_tso_set_tso,
(void *)&cmd_tso_set_mode,
cmdline_parse_inst_t cmd_tso_show = {
.f = cmd_tso_set_parsed,
.data = NULL,
- .help_str = "Show TSO segment size for csum engine: "
- "tso show <port>",
+ .help_str = "tso show <port_id>: "
+ "Show TSO segment size of non-tunneled packets for csum engine",
.tokens = {
(void *)&cmd_tso_set_tso,
(void *)&cmd_tso_show_mode,
},
};
+/* *** ENABLE HARDWARE SEGMENTATION IN TX TUNNELED PACKETS *** */
+struct cmd_tunnel_tso_set_result {
+ cmdline_fixed_string_t tso;
+ cmdline_fixed_string_t mode;
+ uint16_t tso_segsz;
+ uint8_t port_id;
+};
+
+static void
+check_tunnel_tso_nic_support(uint8_t port_id)
+{
+ struct rte_eth_dev_info dev_info;
+
+ rte_eth_dev_info_get(port_id, &dev_info);
+ if (!(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_VXLAN_TNL_TSO))
+ printf("Warning: TSO enabled but VXLAN TUNNEL TSO not "
+ "supported by port %d\n", port_id);
+ if (!(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_GRE_TNL_TSO))
+ printf("Warning: TSO enabled but GRE TUNNEL TSO not "
+ "supported by port %d\n", port_id);
+ if (!(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_IPIP_TNL_TSO))
+ printf("Warning: TSO enabled but IPIP TUNNEL TSO not "
+ "supported by port %d\n", port_id);
+ if (!(dev_info.tx_offload_capa & DEV_TX_OFFLOAD_GENEVE_TNL_TSO))
+ printf("Warning: TSO enabled but GENEVE TUNNEL TSO not "
+ "supported by port %d\n", port_id);
+}
+
+static void
+cmd_tunnel_tso_set_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_tunnel_tso_set_result *res = parsed_result;
+
+ if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+ return;
+
+ if (!strcmp(res->mode, "set"))
+ ports[res->port_id].tunnel_tso_segsz = res->tso_segsz;
+
+ if (ports[res->port_id].tunnel_tso_segsz == 0)
+ printf("TSO for tunneled packets is disabled\n");
+ else {
+ printf("TSO segment size for tunneled packets is %d\n",
+ ports[res->port_id].tunnel_tso_segsz);
+
+ /* Below conditions are needed to make it work:
+ * (1) tunnel TSO is supported by the NIC;
+ * (2) "csum parse_tunnel" must be set so that tunneled pkts
+ * are recognized;
+ * (3) for tunneled pkts with outer L3 of IPv4,
+ * "csum set outer-ip" must be set to hw, because after tso,
+ * total_len of outer IP header is changed, and the checksum
+ * of outer IP header calculated by sw should be wrong; that
+ * is not necessary for IPv6 tunneled pkts because there's no
+ * checksum in IP header anymore.
+ */
+ check_tunnel_tso_nic_support(res->port_id);
+
+ if (!(ports[res->port_id].tx_ol_flags &
+ TESTPMD_TX_OFFLOAD_PARSE_TUNNEL))
+ printf("Warning: csum parse_tunnel must be set "
+ "so that tunneled packets are recognized\n");
+ if (!(ports[res->port_id].tx_ol_flags &
+ TESTPMD_TX_OFFLOAD_OUTER_IP_CKSUM))
+ printf("Warning: csum set outer-ip must be set to hw "
+ "if outer L3 is IPv4; not necessary for IPv6\n");
+ }
+}
+
+cmdline_parse_token_string_t cmd_tunnel_tso_set_tso =
+ TOKEN_STRING_INITIALIZER(struct cmd_tunnel_tso_set_result,
+ tso, "tunnel_tso");
+cmdline_parse_token_string_t cmd_tunnel_tso_set_mode =
+ TOKEN_STRING_INITIALIZER(struct cmd_tunnel_tso_set_result,
+ mode, "set");
+cmdline_parse_token_num_t cmd_tunnel_tso_set_tso_segsz =
+ TOKEN_NUM_INITIALIZER(struct cmd_tunnel_tso_set_result,
+ tso_segsz, UINT16);
+cmdline_parse_token_num_t cmd_tunnel_tso_set_portid =
+ TOKEN_NUM_INITIALIZER(struct cmd_tunnel_tso_set_result,
+ port_id, UINT8);
+
+cmdline_parse_inst_t cmd_tunnel_tso_set = {
+ .f = cmd_tunnel_tso_set_parsed,
+ .data = NULL,
+ .help_str = "tunnel_tso set <tso_segsz> <port_id>: "
+ "Set TSO segment size of tunneled packets for csum engine "
+ "(0 to disable)",
+ .tokens = {
+ (void *)&cmd_tunnel_tso_set_tso,
+ (void *)&cmd_tunnel_tso_set_mode,
+ (void *)&cmd_tunnel_tso_set_tso_segsz,
+ (void *)&cmd_tunnel_tso_set_portid,
+ NULL,
+ },
+};
+
+cmdline_parse_token_string_t cmd_tunnel_tso_show_mode =
+ TOKEN_STRING_INITIALIZER(struct cmd_tunnel_tso_set_result,
+ mode, "show");
+
+
+cmdline_parse_inst_t cmd_tunnel_tso_show = {
+ .f = cmd_tunnel_tso_set_parsed,
+ .data = NULL,
+ .help_str = "tunnel_tso show <port_id> "
+ "Show TSO segment size of tunneled packets for csum engine",
+ .tokens = {
+ (void *)&cmd_tunnel_tso_set_tso,
+ (void *)&cmd_tunnel_tso_show_mode,
+ (void *)&cmd_tunnel_tso_set_portid,
+ NULL,
+ },
+};
+
/* *** ENABLE/DISABLE FLUSH ON RX STREAMS *** */
struct cmd_set_flush_rx {
cmdline_fixed_string_t set;
cmdline_parse_inst_t cmd_set_flush_rx = {
.f = cmd_set_flush_rx_parsed,
- .help_str = "set flush_rx on|off: enable/disable flush on rx streams",
+ .help_str = "set flush_rx on|off: Enable/Disable flush on rx streams",
.data = NULL,
.tokens = {
(void *)&cmd_setflushrx_set,
cmdline_parse_inst_t cmd_set_link_check = {
.f = cmd_set_link_check_parsed,
- .help_str = "set link_check on|off: enable/disable link status check "
+ .help_str = "set link_check on|off: Enable/Disable link status check "
"when starting/stopping a port",
.data = NULL,
.tokens = {
portid_t port_id = res->port_id;
uint32_t bypass_mode = RTE_BYPASS_MODE_NORMAL;
- if (!bypass_is_supported(port_id))
- return;
-
if (!strcmp(res->value, "bypass"))
bypass_mode = RTE_BYPASS_MODE_BYPASS;
else if (!strcmp(res->value, "isolate"))
cmdline_parse_inst_t cmd_set_bypass_mode = {
.f = cmd_set_bypass_mode_parsed,
- .help_str = "set bypass mode (normal|bypass|isolate) (port_id): "
+ .help_str = "set bypass mode normal|bypass|isolate <port_id>: "
"Set the NIC bypass mode for port_id",
.data = NULL,
.tokens = {
uint32_t bypass_event = RTE_BYPASS_EVENT_NONE;
uint32_t bypass_mode = RTE_BYPASS_MODE_NORMAL;
- if (!bypass_is_supported(port_id))
- return;
-
if (!strcmp(res->event_value, "timeout"))
bypass_event = RTE_BYPASS_EVENT_TIMEOUT;
else if (!strcmp(res->event_value, "os_on"))
cmdline_parse_inst_t cmd_set_bypass_event = {
.f = cmd_set_bypass_event_parsed,
- .help_str = "set bypass event (timeout|os_on|os_off|power_on|power_off) "
- "mode (normal|bypass|isolate) (port_id): "
- "Set the NIC bypass event mode for port_id",
+ .help_str = "set bypass event none|timeout|os_on|os_off|power_on|"
+ "power_off mode normal|bypass|isolate <port_id>: "
+ "Set the NIC bypass event mode for port_id",
.data = NULL,
.tokens = {
(void *)&cmd_setbypass_event_set,
cmdline_parse_inst_t cmd_set_bypass_timeout = {
.f = cmd_set_bypass_timeout_parsed,
- .help_str = "set bypass timeout (0|1.5|2|3|4|8|16|32) seconds: "
- "Set the NIC bypass watchdog timeout",
+ .help_str = "set bypass timeout 0|1.5|2|3|4|8|16|32: "
+ "Set the NIC bypass watchdog timeout in seconds",
.data = NULL,
.tokens = {
(void *)&cmd_setbypass_timeout_set,
"timeout"};
int num_events = (sizeof events) / (sizeof events[0]);
- if (!bypass_is_supported(port_id))
- return;
-
/* Display the bypass mode.*/
if (0 != rte_eth_dev_bypass_state_show(port_id, &bypass_mode)) {
printf("\tFailed to get bypass mode for port = %d\n", port_id);
cmdline_parse_inst_t cmd_show_bypass_config = {
.f = cmd_show_bypass_config_parsed,
- .help_str = "show bypass config (port_id): "
+ .help_str = "show bypass config <port_id>: "
"Show the NIC bypass config for port_id",
.data = NULL,
.tokens = {
cmdline_parse_inst_t cmd_set_bonding_mode = {
.f = cmd_set_bonding_mode_parsed,
- .help_str = "set bonding mode (mode_value) (port_id): Set the bonding mode for port_id",
+ .help_str = "set bonding mode <mode_value> <port_id>: "
+ "Set the bonding mode for port_id",
.data = NULL,
.tokens = {
(void *) &cmd_setbonding_mode_set,
cmdline_parse_inst_t cmd_set_balance_xmit_policy = {
.f = cmd_set_bonding_balance_xmit_policy_parsed,
- .help_str = "set bonding balance_xmit_policy (port_id) (policy_value): Set the bonding balance_xmit_policy for port_id",
+ .help_str = "set bonding balance_xmit_policy <port_id> "
+ "l2|l23|l34: "
+ "Set the bonding balance_xmit_policy for port_id",
.data = NULL,
.tokens = {
(void *)&cmd_setbonding_balance_xmit_policy_set,
cmdline_parse_inst_t cmd_show_bonding_config = {
.f = cmd_show_bonding_config_parsed,
- .help_str = "show bonding config (port_id): Show the bonding config for port_id",
+ .help_str = "show bonding config <port_id>: "
+ "Show the bonding config for port_id",
.data = NULL,
.tokens = {
(void *)&cmd_showbonding_config_show,
cmdline_parse_inst_t cmd_set_bonding_primary = {
.f = cmd_set_bonding_primary_parsed,
- .help_str = "set bonding primary (slave_id) (port_id): Set the primary slave for port_id",
+ .help_str = "set bonding primary <slave_id> <port_id>: "
+ "Set the primary slave for port_id",
.data = NULL,
.tokens = {
(void *)&cmd_setbonding_primary_set,
cmdline_parse_inst_t cmd_add_bonding_slave = {
.f = cmd_add_bonding_slave_parsed,
- .help_str = "add bonding slave (slave_id) (port_id): Add a slave device to a bonded device",
+ .help_str = "add bonding slave <slave_id> <port_id>: "
+ "Add a slave device to a bonded device",
.data = NULL,
.tokens = {
(void *)&cmd_addbonding_slave_add,
cmdline_parse_inst_t cmd_remove_bonding_slave = {
.f = cmd_remove_bonding_slave_parsed,
- .help_str = "remove bonding slave (slave_id) (port_id): Remove a slave device from a bonded device",
+ .help_str = "remove bonding slave <slave_id> <port_id>: "
+ "Remove a slave device from a bonded device",
.data = NULL,
.tokens = {
(void *)&cmd_removebonding_slave_remove,
return;
}
- snprintf(ethdev_name, RTE_ETH_NAME_MAX_LEN, "eth_bond_testpmd_%d",
+ snprintf(ethdev_name, RTE_ETH_NAME_MAX_LEN, "net_bond_testpmd_%d",
bond_dev_num++);
/* Create a new bonded device. */
cmdline_parse_inst_t cmd_create_bonded_device = {
.f = cmd_create_bonded_device_parsed,
- .help_str = "create bonded device (mode) (socket): Create a new bonded device with specific bonding mode and socket",
+ .help_str = "create bonded device <mode> <socket>: "
+ "Create a new bonded device with specific bonding mode and socket",
.data = NULL,
.tokens = {
(void *)&cmd_createbonded_device_create,
cmdline_parse_inst_t cmd_set_bond_mac_addr = {
.f = cmd_set_bond_mac_addr_parsed,
.data = (void *) 0,
- .help_str = "set bonding mac_addr (port_id) (address): ",
+ .help_str = "set bonding mac_addr <port_id> <mac_addr>",
.tokens = {
(void *)&cmd_set_bond_mac_addr_set,
(void *)&cmd_set_bond_mac_addr_bonding,
cmdline_parse_inst_t cmd_set_bond_mon_period = {
.f = cmd_set_bond_mon_period_parsed,
.data = (void *) 0,
- .help_str = "set bonding mon_period (port_id) (period_ms): ",
+ .help_str = "set bonding mon_period <port_id> <period_ms>",
.tokens = {
(void *)&cmd_set_bond_mon_period_set,
(void *)&cmd_set_bond_mon_period_bonding,
{
struct cmd_set_fwd_mode_result *res = parsed_result;
+ retry_enabled = 0;
set_pkt_forwarding_mode(res->mode);
}
cmdline_parse_token_string_t *token_struct;
modes = list_pkt_forwarding_modes();
- snprintf(help, sizeof help, "set fwd %s - "
- "set packet forwarding mode", modes);
+ snprintf(help, sizeof(help), "set fwd %s: "
+ "Set packet forwarding mode", modes);
cmd_set_fwd_mode.help_str = help;
/* string token separator is # */
token_struct->string_data.str = token;
}
+/* *** SET RETRY FORWARDING MODE *** */
+struct cmd_set_fwd_retry_mode_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t fwd;
+ cmdline_fixed_string_t mode;
+ cmdline_fixed_string_t retry;
+};
+
+static void cmd_set_fwd_retry_mode_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_set_fwd_retry_mode_result *res = parsed_result;
+
+ retry_enabled = 1;
+ set_pkt_forwarding_mode(res->mode);
+}
+
+cmdline_parse_token_string_t cmd_setfwd_retry_set =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_fwd_retry_mode_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_setfwd_retry_fwd =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_fwd_retry_mode_result,
+ fwd, "fwd");
+cmdline_parse_token_string_t cmd_setfwd_retry_mode =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_fwd_retry_mode_result,
+ mode,
+ "" /* defined at init */);
+cmdline_parse_token_string_t cmd_setfwd_retry_retry =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_fwd_retry_mode_result,
+ retry, "retry");
+
+cmdline_parse_inst_t cmd_set_fwd_retry_mode = {
+ .f = cmd_set_fwd_retry_mode_parsed,
+ .data = NULL,
+ .help_str = NULL, /* defined at init */
+ .tokens = {
+ (void *)&cmd_setfwd_retry_set,
+ (void *)&cmd_setfwd_retry_fwd,
+ (void *)&cmd_setfwd_retry_mode,
+ (void *)&cmd_setfwd_retry_retry,
+ NULL,
+ },
+};
+
+static void cmd_set_fwd_retry_mode_init(void)
+{
+ char *modes, *c;
+ static char token[128];
+ static char help[256];
+ cmdline_parse_token_string_t *token_struct;
+
+ modes = list_pkt_forwarding_retry_modes();
+ snprintf(help, sizeof(help), "set fwd %s retry: "
+ "Set packet forwarding mode with retry", modes);
+ cmd_set_fwd_retry_mode.help_str = help;
+
+ /* string token separator is # */
+ for (c = token; *modes != '\0'; modes++)
+ if (*modes == '|')
+ *c++ = '#';
+ else
+ *c++ = *modes;
+ token_struct = (cmdline_parse_token_string_t *)
+ cmd_set_fwd_retry_mode.tokens[2];
+ token_struct->string_data.str = token;
+}
+
/* *** SET BURST TX DELAY TIME RETRY NUMBER *** */
struct cmd_set_burst_tx_retry_result {
cmdline_fixed_string_t set;
cmdline_parse_inst_t cmd_set_burst_tx_retry = {
.f = cmd_set_burst_tx_retry_parsed,
- .help_str = "set burst tx delay (time_by_useconds) retry (retry_num)",
+ .help_str = "set burst tx delay <delay_usec> retry <num_retry>",
.tokens = {
(void *)&cmd_set_burst_tx_retry_set,
(void *)&cmd_set_burst_tx_retry_burst,
cmdline_parse_inst_t cmd_set_promisc_mode_all = {
.f = cmd_set_promisc_mode_parsed,
.data = (void *)1,
- .help_str = "set promisc all on|off: set promisc mode for all ports",
+ .help_str = "set promisc all on|off: Set promisc mode for all ports",
.tokens = {
(void *)&cmd_setpromisc_set,
(void *)&cmd_setpromisc_promisc,
cmdline_parse_inst_t cmd_set_promisc_mode_one = {
.f = cmd_set_promisc_mode_parsed,
.data = (void *)0,
- .help_str = "set promisc X on|off: set promisc mode on port X",
+ .help_str = "set promisc <port_id> on|off: Set promisc mode on port_id",
.tokens = {
(void *)&cmd_setpromisc_set,
(void *)&cmd_setpromisc_promisc,
cmdline_parse_inst_t cmd_set_allmulti_mode_all = {
.f = cmd_set_allmulti_mode_parsed,
.data = (void *)1,
- .help_str = "set allmulti all on|off: set allmulti mode for all ports",
+ .help_str = "set allmulti all on|off: Set allmulti mode for all ports",
.tokens = {
(void *)&cmd_setallmulti_set,
(void *)&cmd_setallmulti_allmulti,
cmdline_parse_inst_t cmd_set_allmulti_mode_one = {
.f = cmd_set_allmulti_mode_parsed,
.data = (void *)0,
- .help_str = "set allmulti X on|off: set allmulti mode on port X",
+ .help_str = "set allmulti <port_id> on|off: "
+ "Set allmulti mode on port_id",
.tokens = {
(void *)&cmd_setallmulti_set,
(void *)&cmd_setallmulti_allmulti,
cmdline_parse_inst_t cmd_link_flow_control_set = {
.f = cmd_link_flow_ctrl_set_parsed,
.data = NULL,
- .help_str = "Configure the Ethernet flow control: set flow_ctrl rx on|off \
-tx on|off high_water low_water pause_time send_xon mac_ctrl_frame_fwd on|off \
-autoneg on|off port_id",
+ .help_str = "set flow_ctrl rx on|off tx on|off <high_water> "
+ "<low_water> <pause_time> <send_xon> mac_ctrl_frame_fwd on|off "
+ "autoneg on|off <port_id>: Configure the Ethernet flow control",
.tokens = {
(void *)&cmd_lfc_set_set,
(void *)&cmd_lfc_set_flow_ctrl,
cmdline_parse_inst_t cmd_link_flow_control_set_rx = {
.f = cmd_link_flow_ctrl_set_parsed,
.data = (void *)&cmd_link_flow_control_set_rx,
- .help_str = "Change rx flow control parameter: set flow_ctrl "
- "rx on|off port_id",
+ .help_str = "set flow_ctrl rx on|off <port_id>: "
+ "Change rx flow control parameter",
.tokens = {
(void *)&cmd_lfc_set_set,
(void *)&cmd_lfc_set_flow_ctrl,
cmdline_parse_inst_t cmd_link_flow_control_set_tx = {
.f = cmd_link_flow_ctrl_set_parsed,
.data = (void *)&cmd_link_flow_control_set_tx,
- .help_str = "Change tx flow control parameter: set flow_ctrl "
- "tx on|off port_id",
+ .help_str = "set flow_ctrl tx on|off <port_id>: "
+ "Change tx flow control parameter",
.tokens = {
(void *)&cmd_lfc_set_set,
(void *)&cmd_lfc_set_flow_ctrl,
cmdline_parse_inst_t cmd_link_flow_control_set_hw = {
.f = cmd_link_flow_ctrl_set_parsed,
.data = (void *)&cmd_link_flow_control_set_hw,
- .help_str = "Change high water flow control parameter: set flow_ctrl "
- "high_water value port_id",
+ .help_str = "set flow_ctrl high_water <value> <port_id>: "
+ "Change high water flow control parameter",
.tokens = {
(void *)&cmd_lfc_set_set,
(void *)&cmd_lfc_set_flow_ctrl,
cmdline_parse_inst_t cmd_link_flow_control_set_lw = {
.f = cmd_link_flow_ctrl_set_parsed,
.data = (void *)&cmd_link_flow_control_set_lw,
- .help_str = "Change low water flow control parameter: set flow_ctrl "
- "low_water value port_id",
+ .help_str = "set flow_ctrl low_water <value> <port_id>: "
+ "Change low water flow control parameter",
.tokens = {
(void *)&cmd_lfc_set_set,
(void *)&cmd_lfc_set_flow_ctrl,
cmdline_parse_inst_t cmd_link_flow_control_set_pt = {
.f = cmd_link_flow_ctrl_set_parsed,
.data = (void *)&cmd_link_flow_control_set_pt,
- .help_str = "Change pause time flow control parameter: set flow_ctrl "
- "pause_time value port_id",
+ .help_str = "set flow_ctrl pause_time <value> <port_id>: "
+ "Change pause time flow control parameter",
.tokens = {
(void *)&cmd_lfc_set_set,
(void *)&cmd_lfc_set_flow_ctrl,
cmdline_parse_inst_t cmd_link_flow_control_set_xon = {
.f = cmd_link_flow_ctrl_set_parsed,
.data = (void *)&cmd_link_flow_control_set_xon,
- .help_str = "Change send_xon flow control parameter: set flow_ctrl "
- "send_xon value port_id",
+ .help_str = "set flow_ctrl send_xon <value> <port_id>: "
+ "Change send_xon flow control parameter",
.tokens = {
(void *)&cmd_lfc_set_set,
(void *)&cmd_lfc_set_flow_ctrl,
cmdline_parse_inst_t cmd_link_flow_control_set_macfwd = {
.f = cmd_link_flow_ctrl_set_parsed,
.data = (void *)&cmd_link_flow_control_set_macfwd,
- .help_str = "Change mac ctrl fwd flow control parameter: set flow_ctrl "
- "mac_ctrl_frame_fwd on|off port_id",
+ .help_str = "set flow_ctrl mac_ctrl_frame_fwd on|off <port_id>: "
+ "Change mac ctrl fwd flow control parameter",
.tokens = {
(void *)&cmd_lfc_set_set,
(void *)&cmd_lfc_set_flow_ctrl,
cmdline_parse_inst_t cmd_link_flow_control_set_autoneg = {
.f = cmd_link_flow_ctrl_set_parsed,
.data = (void *)&cmd_link_flow_control_set_autoneg,
- .help_str = "Change autoneg flow control parameter: set flow_ctrl "
- "autoneg on|off port_id",
+ .help_str = "set flow_ctrl autoneg on|off <port_id>: "
+ "Change autoneg flow control parameter",
.tokens = {
(void *)&cmd_lfc_set_set,
(void *)&cmd_lfc_set_flow_ctrl,
cmdline_parse_inst_t cmd_priority_flow_control_set = {
.f = cmd_priority_flow_ctrl_set_parsed,
.data = NULL,
- .help_str = "Configure the Ethernet priority flow control: set pfc_ctrl rx on|off\n\
- tx on|off high_water low_water pause_time priority port_id",
+ .help_str = "set pfc_ctrl rx on|off tx on|off <high_water> <low_water> "
+ "<pause_time> <priority> <port_id>: "
+ "Configure the Ethernet priority flow control",
.tokens = {
(void *)&cmd_pfc_set_set,
(void *)&cmd_pfc_set_flow_ctrl,
cmdline_parse_inst_t cmd_reset = {
.f = cmd_reset_parsed,
.data = NULL,
- .help_str = "set default: reset default forwarding configuration",
+ .help_str = "set default: Reset default forwarding configuration",
.tokens = {
(void *)&cmd_reset_set,
(void *)&cmd_reset_def,
cmdline_parse_inst_t cmd_start = {
.f = cmd_start_parsed,
.data = NULL,
- .help_str = "start packet forwarding",
+ .help_str = "start: Start packet forwarding",
.tokens = {
(void *)&cmd_start_start,
NULL,
cmdline_parse_inst_t cmd_start_tx_first = {
.f = cmd_start_tx_first_parsed,
.data = NULL,
- .help_str = "start packet forwarding, after sending 1 burst of packets",
+ .help_str = "start tx_first: Start packet forwarding, "
+ "after sending 1 burst of packets",
.tokens = {
(void *)&cmd_start_tx_first_start,
(void *)&cmd_start_tx_first_tx_first,
},
};
+/* *** START FORWARDING WITH N TX BURST FIRST *** */
+struct cmd_start_tx_first_n_result {
+ cmdline_fixed_string_t start;
+ cmdline_fixed_string_t tx_first;
+ uint32_t tx_num;
+};
+
+static void
+cmd_start_tx_first_n_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_start_tx_first_n_result *res = parsed_result;
+
+ start_packet_forwarding(res->tx_num);
+}
+
+cmdline_parse_token_string_t cmd_start_tx_first_n_start =
+ TOKEN_STRING_INITIALIZER(struct cmd_start_tx_first_n_result,
+ start, "start");
+cmdline_parse_token_string_t cmd_start_tx_first_n_tx_first =
+ TOKEN_STRING_INITIALIZER(struct cmd_start_tx_first_n_result,
+ tx_first, "tx_first");
+cmdline_parse_token_num_t cmd_start_tx_first_n_tx_num =
+ TOKEN_NUM_INITIALIZER(struct cmd_start_tx_first_n_result,
+ tx_num, UINT32);
+
+cmdline_parse_inst_t cmd_start_tx_first_n = {
+ .f = cmd_start_tx_first_n_parsed,
+ .data = NULL,
+ .help_str = "start tx_first <num>: "
+ "packet forwarding, after sending <num> bursts of packets",
+ .tokens = {
+ (void *)&cmd_start_tx_first_n_start,
+ (void *)&cmd_start_tx_first_n_tx_first,
+ (void *)&cmd_start_tx_first_n_tx_num,
+ NULL,
+ },
+};
+
/* *** SET LINK UP *** */
struct cmd_set_link_up_result {
cmdline_fixed_string_t set;
cmdline_parse_inst_t cmd_set_link_up = {
.f = cmd_set_link_up_parsed,
.data = NULL,
- .help_str = "set link-up port (port id)",
+ .help_str = "set link-up port <port id>",
.tokens = {
(void *)&cmd_set_link_up_set,
(void *)&cmd_set_link_up_link_up,
cmdline_parse_inst_t cmd_set_link_down = {
.f = cmd_set_link_down_parsed,
.data = NULL,
- .help_str = "set link-down port (port id)",
+ .help_str = "set link-down port <port id>",
.tokens = {
(void *)&cmd_set_link_down_set,
(void *)&cmd_set_link_down_link_down,
else if (!strcmp(res->what, "cores"))
fwd_lcores_config_display();
else if (!strcmp(res->what, "fwd"))
- fwd_config_display();
+ pkt_fwd_config_display(&cur_fwd_config);
else if (!strcmp(res->what, "txpkts"))
show_tx_pkt_segments();
}
cmdline_parse_inst_t cmd_showport = {
.f = cmd_showport_parsed,
.data = NULL,
- .help_str = "show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc X (X = port number)",
+ .help_str = "show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc "
+ "<port_id>",
.tokens = {
(void *)&cmd_showport_show,
(void *)&cmd_showport_port,
cmdline_parse_inst_t cmd_showqueue = {
.f = cmd_showqueue_parsed,
.data = NULL,
- .help_str = "show rxq|txq info <port number> <queue_number>",
+ .help_str = "show rxq|txq info <port_id> <queue_id>",
.tokens = {
(void *)&cmd_showqueue_show,
(void *)&cmd_showqueue_type,
cmdline_parse_inst_t cmd_read_reg = {
.f = cmd_read_reg_parsed,
.data = NULL,
- .help_str = "read reg port_id reg_off",
+ .help_str = "read reg <port_id> <reg_off>",
.tokens = {
(void *)&cmd_read_reg_read,
(void *)&cmd_read_reg_reg,
cmdline_parse_inst_t cmd_read_reg_bit_field = {
.f = cmd_read_reg_bit_field_parsed,
.data = NULL,
- .help_str = "read regfield port_id reg_off bit_x bit_y "
- "(read register bit field between bit_x and bit_y included)",
+ .help_str = "read regfield <port_id> <reg_off> <bit_x> <bit_y>: "
+ "Read register bit field between bit_x and bit_y included",
.tokens = {
(void *)&cmd_read_reg_bit_field_read,
(void *)&cmd_read_reg_bit_field_regfield,
cmdline_parse_inst_t cmd_read_reg_bit = {
.f = cmd_read_reg_bit_parsed,
.data = NULL,
- .help_str = "read regbit port_id reg_off bit_x (0 <= bit_x <= 31)",
+ .help_str = "read regbit <port_id> <reg_off> <bit_x>: 0 <= bit_x <= 31",
.tokens = {
(void *)&cmd_read_reg_bit_read,
(void *)&cmd_read_reg_bit_regbit,
cmdline_parse_inst_t cmd_write_reg = {
.f = cmd_write_reg_parsed,
.data = NULL,
- .help_str = "write reg port_id reg_off reg_value",
+ .help_str = "write reg <port_id> <reg_off> <reg_value>",
.tokens = {
(void *)&cmd_write_reg_write,
(void *)&cmd_write_reg_reg,
cmdline_parse_inst_t cmd_write_reg_bit_field = {
.f = cmd_write_reg_bit_field_parsed,
.data = NULL,
- .help_str = "write regfield port_id reg_off bit_x bit_y reg_value"
- "(set register bit field between bit_x and bit_y included)",
+ .help_str = "write regfield <port_id> <reg_off> <bit_x> <bit_y> "
+ "<reg_value>: "
+ "Set register bit field between bit_x and bit_y included",
.tokens = {
(void *)&cmd_write_reg_bit_field_write,
(void *)&cmd_write_reg_bit_field_regfield,
cmdline_parse_inst_t cmd_write_reg_bit = {
.f = cmd_write_reg_bit_parsed,
.data = NULL,
- .help_str = "write regbit port_id reg_off bit_x 0/1 (0 <= bit_x <= 31)",
+ .help_str = "write regbit <port_id> <reg_off> <bit_x> 0|1: "
+ "0 <= bit_x <= 31",
.tokens = {
(void *)&cmd_write_reg_bit_write,
(void *)&cmd_write_reg_bit_regbit,
cmdline_parse_inst_t cmd_read_rxd_txd = {
.f = cmd_read_rxd_txd_parsed,
.data = NULL,
- .help_str = "read rxd|txd port_id queue_id rxd_id",
+ .help_str = "read rxd|txd <port_id> <queue_id> <desc_id>",
.tokens = {
(void *)&cmd_read_rxd_txd_read,
(void *)&cmd_read_rxd_txd_rxd_txd,
cmdline_parse_inst_t cmd_quit = {
.f = cmd_quit_parsed,
.data = NULL,
- .help_str = "exit application",
+ .help_str = "quit: Exit application",
.tokens = {
(void *)&cmd_quit_quit,
NULL,
cmdline_parse_inst_t cmd_mac_addr = {
.f = cmd_mac_addr_parsed,
.data = (void *)0,
- .help_str = "mac_addr add|remove X <address>: "
- "add/remove MAC address on port X",
+ .help_str = "mac_addr add|remove <port_id> <mac_addr>: "
+ "Add/Remove MAC address on port_id",
.tokens = {
(void *)&cmd_mac_addr_cmd,
(void *)&cmd_mac_addr_what,
cmdline_parse_inst_t cmd_set_qmap = {
.f = cmd_set_qmap_parsed,
.data = NULL,
- .help_str = "Set statistics mapping value on tx|rx queue_id of port_id",
+ .help_str = "set stat_qmap rx|tx <port_id> <queue_id> <map_value>: "
+ "Set statistics mapping value on tx|rx queue_id of port_id",
.tokens = {
(void *)&cmd_setqmap_set,
(void *)&cmd_setqmap_qmap,
cmdline_parse_inst_t cmd_set_uc_hash_filter = {
.f = cmd_set_uc_hash_parsed,
.data = NULL,
- .help_str = "set port X uta Y on|off(X = port number,Y = MAC address)",
+ .help_str = "set port <port_id> uta <mac_addr> on|off)",
.tokens = {
(void *)&cmd_set_uc_hash_set,
(void *)&cmd_set_uc_hash_port,
cmdline_parse_inst_t cmd_set_uc_all_hash_filter = {
.f = cmd_set_uc_all_hash_parsed,
.data = NULL,
- .help_str = "set port X uta all on|off (X = port number)",
+ .help_str = "set port <port_id> uta all on|off",
.tokens = {
(void *)&cmd_set_uc_all_hash_set,
(void *)&cmd_set_uc_all_hash_port,
cmdline_parse_inst_t cmd_set_vf_macvlan_filter = {
.f = cmd_set_vf_macvlan_parsed,
.data = NULL,
- .help_str = "set port (portid) vf (vfid) (mac-addr) "
- "(exact-mac|exact-mac-vlan|hashmac|hashmac-vlan) "
- "on|off\n"
- "exact match rule:exact match of MAC or MAC and VLAN; "
- "hash match rule: hash match of MAC and exact match "
- "of VLAN",
+ .help_str = "set port <port_id> vf <vf_id> <mac_addr> "
+ "exact-mac|exact-mac-vlan|hashmac|hashmac-vlan on|off: "
+ "Exact match rule: exact match of MAC or MAC and VLAN; "
+ "hash match rule: hash match of MAC and exact match of VLAN",
.tokens = {
(void *)&cmd_set_vf_macvlan_set,
(void *)&cmd_set_vf_macvlan_port,
},
};
+#ifdef RTE_LIBRTE_IXGBE_PMD
/* *** CONFIGURE VF TRAFFIC CONTROL *** */
struct cmd_set_vf_traffic {
cmdline_fixed_string_t set;
cmdline_parse_inst_t cmd_set_vf_traffic = {
.f = cmd_set_vf_traffic_parsed,
.data = NULL,
- .help_str = "set port X vf Y rx|tx on|off"
- "(X = port number,Y = vf id)",
+ .help_str = "set port <port_id> vf <vf_id> rx|tx on|off",
.tokens = {
(void *)&cmd_setvf_traffic_set,
(void *)&cmd_setvf_traffic_port,
rx_mode |= ETH_VMDQ_ACCEPT_MULTICAST;
}
- ret = rte_eth_dev_set_vf_rxmode(res->port_id,res->vf_id,rx_mode,(uint8_t)is_on);
+ ret = rte_pmd_ixgbe_set_vf_rxmode(res->port_id, res->vf_id, rx_mode, (uint8_t)is_on);
if (ret < 0)
printf("bad VF receive mode parameter, return code = %d \n",
ret);
cmdline_parse_inst_t cmd_set_vf_rxmode = {
.f = cmd_set_vf_rxmode_parsed,
.data = NULL,
- .help_str = "set port X vf Y rxmode AUPE|ROPE|BAM|MPE on|off",
+ .help_str = "set port <port_id> vf <vf_id> rxmode "
+ "AUPE|ROPE|BAM|MPE on|off",
.tokens = {
(void *)&cmd_set_vf_rxmode_set,
(void *)&cmd_set_vf_rxmode_port,
NULL,
},
};
+#endif
/* *** ADD MAC ADDRESS FILTER FOR A VF OF A PORT *** */
struct cmd_vf_mac_addr_result {
cmdline_parse_inst_t cmd_vf_mac_addr_filter = {
.f = cmd_vf_mac_addr_parsed,
.data = (void *)0,
- .help_str = "mac_addr add port X vf Y ethaddr:(X = port number,"
- "Y = VF number)add MAC address filtering for a VF on port X",
+ .help_str = "mac_addr add port <port_id> vf <vf_id> <mac_addr>: "
+ "Add MAC address filtering for a VF on port_id",
.tokens = {
(void *)&cmd_vf_mac_addr_cmd,
(void *)&cmd_vf_mac_addr_what,
},
};
+#ifdef RTE_LIBRTE_IXGBE_PMD
/* *** ADD/REMOVE A VLAN IDENTIFIER TO/FROM A PORT VLAN RX FILTER *** */
struct cmd_vf_rx_vlan_filter {
cmdline_fixed_string_t rx_vlan;
cmdline_parse_inst_t cmd_vf_rxvlan_filter = {
.f = cmd_vf_rx_vlan_filter_parsed,
.data = NULL,
- .help_str = "rx_vlan add|rm X port Y vf Z (X = VLAN ID,"
- "Y = port number,Z = hexadecimal VF mask)",
+ .help_str = "rx_vlan add|rm <vlan_id> port <port_id> vf <vf_mask>: "
+ "(vf_mask = hexadecimal VF mask)",
.tokens = {
(void *)&cmd_vf_rx_vlan_filter_rx_vlan,
(void *)&cmd_vf_rx_vlan_filter_what,
NULL,
},
};
+#endif
/* *** SET RATE LIMIT FOR A QUEUE OF A PORT *** */
struct cmd_queue_rate_limit_result {
cmdline_parse_inst_t cmd_queue_rate_limit = {
.f = cmd_queue_rate_limit_parsed,
.data = (void *)0,
- .help_str = "set port X queue Y rate Z:(X = port number,"
- "Y = queue number,Z = rate number)set rate limit for a queue on port X",
+ .help_str = "set port <port_id> queue <queue_id> rate <rate_value>: "
+ "Set rate limit for a queue on port_id",
.tokens = {
(void *)&cmd_queue_rate_limit_set,
(void *)&cmd_queue_rate_limit_port,
},
};
+#ifdef RTE_LIBRTE_IXGBE_PMD
/* *** SET RATE LIMIT FOR A VF OF A PORT *** */
struct cmd_vf_rate_limit_result {
cmdline_fixed_string_t set;
cmdline_parse_inst_t cmd_vf_rate_limit = {
.f = cmd_vf_rate_limit_parsed,
.data = (void *)0,
- .help_str = "set port X vf Y rate Z queue_mask V:(X = port number,"
- "Y = VF number,Z = rate number, V = queue mask value)set rate limit "
- "for queues of VF on port X",
+ .help_str = "set port <port_id> vf <vf_id> rate <rate_value> "
+ "queue_mask <queue_mask_value>: "
+ "Set rate limit for queues of VF on port_id",
.tokens = {
(void *)&cmd_vf_rate_limit_set,
(void *)&cmd_vf_rate_limit_port,
NULL,
},
};
+#endif
/* *** ADD TUNNEL FILTER OF A PORT *** */
struct cmd_tunnel_filter_result {
if (res->ip_value.family == AF_INET) {
tunnel_filter_conf.ip_addr.ipv4_addr =
- rte_be_to_cpu_32(res->ip_value.addr.ipv4.s_addr);
+ res->ip_value.addr.ipv4.s_addr;
tunnel_filter_conf.ip_type = RTE_TUNNEL_IPTYPE_IPV4;
} else {
- int i;
- for (i = 0; i < 4; i++) {
- tunnel_filter_conf.ip_addr.ipv6_addr[i] =
- rte_be_to_cpu_32(res->ip_value.addr.ipv6.s6_addr32[i]);
- }
+ memcpy(&(tunnel_filter_conf.ip_addr.ipv6_addr),
+ &(res->ip_value.addr.ipv6),
+ sizeof(struct in6_addr));
tunnel_filter_conf.ip_type = RTE_TUNNEL_IPTYPE_IPV6;
}
cmdline_parse_inst_t cmd_tunnel_filter = {
.f = cmd_tunnel_filter_parsed,
.data = (void *)0,
- .help_str = "add/rm tunnel filter of a port: "
- "tunnel_filter add port_id outer_mac inner_mac ip "
- "inner_vlan tunnel_type(vxlan|nvgre|ipingre) filter_type "
- "(oip|iip|imac-ivlan|imac-ivlan-tenid|imac-tenid|"
- "imac|omac-imac-tenid) "
- "tenant_id queue_num",
+ .help_str = "tunnel_filter add|rm <port_id> <outer_mac> <inner_mac> "
+ "<ip> <inner_vlan> vxlan|nvgre|ipingre oip|iip|imac-ivlan|"
+ "imac-ivlan-tenid|imac-tenid|imac|omac-imac-tenid <tenant_id> "
+ "<queue_id>: Add/Rm tunnel filter of a port",
.tokens = {
(void *)&cmd_tunnel_filter_cmd,
(void *)&cmd_tunnel_filter_what,
cmdline_parse_inst_t cmd_tunnel_udp_config = {
.f = cmd_tunnel_udp_config_parsed,
.data = (void *)0,
- .help_str = "add/rm an tunneling UDP port filter: "
- "rx_vxlan_port add udp_port port_id",
+ .help_str = "rx_vxlan_port add|rm <udp_port> <port_id>: "
+ "Add/Remove a tunneling UDP port filter",
.tokens = {
(void *)&cmd_tunnel_udp_config_cmd,
(void *)&cmd_tunnel_udp_config_what,
cmdline_parse_inst_t cmd_global_config = {
.f = cmd_global_config_parsed,
.data = (void *)NULL,
- .help_str = "global_config <port_id> gre-key-len <number>",
+ .help_str = "global_config <port_id> gre-key-len <key_len>",
.tokens = {
(void *)&cmd_global_config_cmd,
(void *)&cmd_global_config_port_id,
cmdline_parse_inst_t cmd_set_mirror_mask = {
.f = cmd_set_mirror_mask_parsed,
.data = NULL,
- .help_str = "set port X mirror-rule Y pool-mirror-up|pool-mirror-down|vlan-mirror"
- " pool_mask|vlan_id[,vlan_id]* dst-pool Z on|off",
+ .help_str = "set port <port_id> mirror-rule <rule_id> "
+ "pool-mirror-up|pool-mirror-down|vlan-mirror "
+ "<pool_mask|vlan_id[,vlan_id]*> dst-pool <pool_id> on|off",
.tokens = {
(void *)&cmd_mirror_mask_set,
(void *)&cmd_mirror_mask_port,
cmdline_parse_inst_t cmd_set_mirror_link = {
.f = cmd_set_mirror_link_parsed,
.data = NULL,
- .help_str = "set port X mirror-rule Y uplink-mirror|"
- "downlink-mirror dst-pool Z on|off",
+ .help_str = "set port <port_id> mirror-rule <rule_id> "
+ "uplink-mirror|downlink-mirror dst-pool <pool_id> on|off",
.tokens = {
(void *)&cmd_mirror_link_set,
(void *)&cmd_mirror_link_port,
cmdline_parse_inst_t cmd_reset_mirror_rule = {
.f = cmd_reset_mirror_rule_parsed,
.data = NULL,
- .help_str = "reset port X mirror-rule Y",
+ .help_str = "reset port <port_id> mirror-rule <rule_id>",
.tokens = {
(void *)&cmd_rm_mirror_rule_reset,
(void *)&cmd_rm_mirror_rule_port,
rte_dump_physmem_layout(stdout);
else if (!strcmp(res->dump, "dump_memzone"))
rte_memzone_dump(stdout);
- else if (!strcmp(res->dump, "dump_log_history"))
- rte_log_dump_history(stdout);
else if (!strcmp(res->dump, "dump_struct_sizes"))
dump_struct_sizes();
else if (!strcmp(res->dump, "dump_ring"))
TOKEN_STRING_INITIALIZER(struct cmd_dump_result, dump,
"dump_physmem#"
"dump_memzone#"
- "dump_log_history#"
"dump_struct_sizes#"
"dump_ring#"
"dump_mempool#"
cmdline_parse_inst_t cmd_dump = {
.f = cmd_dump_parsed, /* function to call */
.data = NULL, /* 2nd arg of func */
- .help_str = "dump status",
+ .help_str = "Dump status",
.tokens = { /* token list, NULL terminated */
(void *)&cmd_dump_dump,
NULL,
cmdline_parse_inst_t cmd_dump_one = {
.f = cmd_dump_one_parsed, /* function to call */
.data = NULL, /* 2nd arg of func */
- .help_str = "dump one ring/mempool: dump_ring|dump_mempool <name>",
+ .help_str = "dump_ring|dump_mempool <name>: Dump one ring/mempool",
.tokens = { /* token list, NULL terminated */
(void *)&cmd_dump_one_dump,
(void *)&cmd_dump_one_name,
cmdline_parse_inst_t cmd_syn_filter = {
.f = cmd_syn_filter_parsed,
.data = NULL,
- .help_str = "add/delete syn filter",
+ .help_str = "syn_filter <port_id> add|del priority high|low queue "
+ "<queue_id>: Add/Delete syn filter",
.tokens = {
(void *)&cmd_syn_filter_filter,
(void *)&cmd_syn_filter_port_id,
cmdline_parse_inst_t cmd_2tuple_filter = {
.f = cmd_2tuple_filter_parsed,
.data = NULL,
- .help_str = "add a 2tuple filter",
+ .help_str = "2tuple_filter <port_id> add|del dst_port <value> protocol "
+ "<value> mask <value> tcp_flags <value> priority <value> queue "
+ "<queue_id>: Add a 2tuple filter",
.tokens = {
(void *)&cmd_2tuple_filter_filter,
(void *)&cmd_2tuple_filter_port_id,
cmdline_parse_inst_t cmd_5tuple_filter = {
.f = cmd_5tuple_filter_parsed,
.data = NULL,
- .help_str = "add/del a 5tuple filter",
+ .help_str = "5tuple_filter <port_id> add|del dst_ip <value> "
+ "src_ip <value> dst_port <value> src_port <value> "
+ "protocol <value> mask <value> tcp_flags <value> "
+ "priority <value> queue <queue_id>: Add/Del a 5tuple filter",
.tokens = {
(void *)&cmd_5tuple_filter_filter,
(void *)&cmd_5tuple_filter_port_id,
cmdline_parse_inst_t cmd_flex_filter = {
.f = cmd_flex_filter_parsed,
.data = NULL,
- .help_str = "add/del a flex filter",
+ .help_str = "flex_filter <port_id> add|del len <value> bytes "
+ "<value> mask <value> priority <value> queue <queue_id>: "
+ "Add/Del a flex filter",
.tokens = {
(void *)&cmd_flex_filter_filter,
(void *)&cmd_flex_filter_port_id,
cmdline_parse_inst_t cmd_ethertype_filter = {
.f = cmd_ethertype_filter_parsed,
.data = NULL,
- .help_str = "add or delete an ethertype filter entry",
+ .help_str = "ethertype_filter <port_id> add|del mac_addr|mac_ignr "
+ "<mac_addr> ethertype <value> drop|fw queue <queue_id>: "
+ "Add or delete an ethertype filter entry",
.tokens = {
(void *)&cmd_ethertype_filter_filter,
(void *)&cmd_ethertype_filter_port_id,
else
entry.action.behavior = RTE_ETH_FDIR_ACCEPT;
- if (!strcmp(res->pf_vf, "pf"))
- entry.input.flow_ext.is_vf = 0;
- else if (!strncmp(res->pf_vf, "vf", 2)) {
- struct rte_eth_dev_info dev_info;
+ if (fdir_conf.mode != RTE_FDIR_MODE_PERFECT_MAC_VLAN &&
+ fdir_conf.mode != RTE_FDIR_MODE_PERFECT_TUNNEL) {
+ if (!strcmp(res->pf_vf, "pf"))
+ entry.input.flow_ext.is_vf = 0;
+ else if (!strncmp(res->pf_vf, "vf", 2)) {
+ struct rte_eth_dev_info dev_info;
- memset(&dev_info, 0, sizeof(dev_info));
- rte_eth_dev_info_get(res->port_id, &dev_info);
- errno = 0;
- vf_id = strtoul(res->pf_vf + 2, &end, 10);
- if (errno != 0 || *end != '\0' || vf_id >= dev_info.max_vfs) {
+ memset(&dev_info, 0, sizeof(dev_info));
+ rte_eth_dev_info_get(res->port_id, &dev_info);
+ errno = 0;
+ vf_id = strtoul(res->pf_vf + 2, &end, 10);
+ if (errno != 0 || *end != '\0' ||
+ vf_id >= dev_info.max_vfs) {
+ printf("invalid parameter %s.\n", res->pf_vf);
+ return;
+ }
+ entry.input.flow_ext.is_vf = 1;
+ entry.input.flow_ext.dst_id = (uint16_t)vf_id;
+ } else {
printf("invalid parameter %s.\n", res->pf_vf);
return;
}
- entry.input.flow_ext.is_vf = 1;
- entry.input.flow_ext.dst_id = (uint16_t)vf_id;
- } else {
- printf("invalid parameter %s.\n", res->pf_vf);
- return;
}
/* set to report FD ID by default */
cmdline_parse_inst_t cmd_add_del_ip_flow_director = {
.f = cmd_flow_director_filter_parsed,
.data = NULL,
- .help_str = "add or delete an ip flow director entry on NIC",
+ .help_str = "flow_director_filter <port_id> mode IP add|del|update flow"
+ " ipv4-other|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|"
+ "ipv6-other|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|"
+ "l2_payload src <src_ip> dst <dst_ip> tos <tos_value> "
+ "proto <proto_value> ttl <ttl_value> vlan <vlan_value> "
+ "flexbytes <flexbyte_vaues> drop|fw <pf_vf> queue <queue_id> "
+ "fd_id <fd_id_value>: "
+ "Add or delete an ip flow director entry on NIC",
.tokens = {
(void *)&cmd_flow_director_filter,
(void *)&cmd_flow_director_port_id,
cmdline_parse_inst_t cmd_add_del_udp_flow_director = {
.f = cmd_flow_director_filter_parsed,
.data = NULL,
- .help_str = "add or delete an udp/tcp flow director entry on NIC",
+ .help_str = "flow_director_filter ... : Add or delete an udp/tcp flow "
+ "director entry on NIC",
.tokens = {
(void *)&cmd_flow_director_filter,
(void *)&cmd_flow_director_port_id,
cmdline_parse_inst_t cmd_add_del_sctp_flow_director = {
.f = cmd_flow_director_filter_parsed,
.data = NULL,
- .help_str = "add or delete a sctp flow director entry on NIC",
+ .help_str = "flow_director_filter ... : Add or delete a sctp flow "
+ "director entry on NIC",
.tokens = {
(void *)&cmd_flow_director_filter,
(void *)&cmd_flow_director_port_id,
cmdline_parse_inst_t cmd_add_del_l2_flow_director = {
.f = cmd_flow_director_filter_parsed,
.data = NULL,
- .help_str = "add or delete a L2 flow director entry on NIC",
+ .help_str = "flow_director_filter ... : Add or delete a L2 flow "
+ "director entry on NIC",
.tokens = {
(void *)&cmd_flow_director_filter,
(void *)&cmd_flow_director_port_id,
cmdline_parse_inst_t cmd_add_del_mac_vlan_flow_director = {
.f = cmd_flow_director_filter_parsed,
.data = NULL,
- .help_str = "add or delete a MAC VLAN flow director entry on NIC",
+ .help_str = "flow_director_filter ... : Add or delete a MAC VLAN flow "
+ "director entry on NIC",
.tokens = {
(void *)&cmd_flow_director_filter,
(void *)&cmd_flow_director_port_id,
cmdline_parse_inst_t cmd_add_del_tunnel_flow_director = {
.f = cmd_flow_director_filter_parsed,
.data = NULL,
- .help_str = "add or delete a tunnel flow director entry on NIC",
+ .help_str = "flow_director_filter ... : Add or delete a tunnel flow "
+ "director entry on NIC",
.tokens = {
(void *)&cmd_flow_director_filter,
(void *)&cmd_flow_director_port_id,
cmdline_parse_inst_t cmd_flush_flow_director = {
.f = cmd_flush_flow_director_parsed,
.data = NULL,
- .help_str = "flush all flow director entries of a device on NIC",
+ .help_str = "flush_flow_director <port_id>: "
+ "Flush all flow director entries of a device on NIC",
.tokens = {
(void *)&cmd_flush_flow_director_flush,
(void *)&cmd_flush_flow_director_port_id,
return;
}
- mask->vlan_tci_mask = res->vlan_mask;
- mask->mac_addr_byte_mask = res->mac_addr_byte_mask;
+ mask->vlan_tci_mask = rte_cpu_to_be_16(res->vlan_mask);
} else if (fdir_conf.mode == RTE_FDIR_MODE_PERFECT_TUNNEL) {
if (strcmp(res->mode_value, "Tunnel")) {
printf("Please set mode to Tunnel.\n");
return;
}
- mask->vlan_tci_mask = res->vlan_mask;
+ mask->vlan_tci_mask = rte_cpu_to_be_16(res->vlan_mask);
mask->mac_addr_byte_mask = res->mac_addr_byte_mask;
- mask->tunnel_id_mask = res->tunnel_id_mask;
+ mask->tunnel_id_mask = rte_cpu_to_be_32(res->tunnel_id_mask);
mask->tunnel_type_mask = res->tunnel_type_mask;
} else {
if (strcmp(res->mode_value, "IP")) {
cmdline_parse_inst_t cmd_set_flow_director_ip_mask = {
.f = cmd_flow_director_mask_parsed,
.data = NULL,
- .help_str = "set IP mode flow director's mask on NIC",
+ .help_str = "flow_director_mask ... : "
+ "Set IP mode flow director's mask on NIC",
.tokens = {
(void *)&cmd_flow_director_mask,
(void *)&cmd_flow_director_mask_port_id,
cmdline_parse_inst_t cmd_set_flow_director_mac_vlan_mask = {
.f = cmd_flow_director_mask_parsed,
.data = NULL,
- .help_str = "set MAC VLAN mode flow director's mask on NIC",
+ .help_str = "flow_director_mask ... : Set MAC VLAN mode "
+ "flow director's mask on NIC",
.tokens = {
(void *)&cmd_flow_director_mask,
(void *)&cmd_flow_director_mask_port_id,
(void *)&cmd_flow_director_mask_mode_mac_vlan,
(void *)&cmd_flow_director_mask_vlan,
(void *)&cmd_flow_director_mask_vlan_value,
- (void *)&cmd_flow_director_mask_mac,
- (void *)&cmd_flow_director_mask_mac_value,
NULL,
},
};
cmdline_parse_inst_t cmd_set_flow_director_tunnel_mask = {
.f = cmd_flow_director_mask_parsed,
.data = NULL,
- .help_str = "set tunnel mode flow director's mask on NIC",
+ .help_str = "flow_director_mask ... : Set tunnel mode "
+ "flow director's mask on NIC",
.tokens = {
(void *)&cmd_flow_director_mask,
(void *)&cmd_flow_director_mask_port_id,
cmdline_parse_inst_t cmd_set_flow_director_flex_mask = {
.f = cmd_flow_director_flex_mask_parsed,
.data = NULL,
- .help_str = "set flow director's flex mask on NIC",
+ .help_str = "flow_director_flex_mask ... : "
+ "Set flow director's flex mask on NIC",
.tokens = {
(void *)&cmd_flow_director_flexmask,
(void *)&cmd_flow_director_flexmask_port_id,
cmdline_parse_inst_t cmd_set_flow_director_flex_payload = {
.f = cmd_flow_director_flxpld_parsed,
.data = NULL,
- .help_str = "set flow director's flex payload on NIC",
+ .help_str = "flow_director_flexpayload ... : "
+ "Set flow director's flex payload on NIC",
.tokens = {
(void *)&cmd_flow_director_flexpayload,
(void *)&cmd_flow_director_flexpayload_port_id,
},
};
+/* Generic flow interface command. */
+extern cmdline_parse_inst_t cmd_flow;
+
/* *** Classification Filters Control *** */
/* *** Get symmetric hash enable per port *** */
struct cmd_get_sym_hash_ena_per_port_result {
cmdline_parse_inst_t cmd_get_sym_hash_ena_per_port = {
.f = cmd_get_sym_hash_per_port_parsed,
.data = NULL,
- .help_str = "get_sym_hash_ena_per_port port_id",
+ .help_str = "get_sym_hash_ena_per_port <port_id>",
.tokens = {
(void *)&cmd_get_sym_hash_ena_per_port_all,
(void *)&cmd_get_sym_hash_ena_per_port_port_id,
cmdline_parse_inst_t cmd_set_sym_hash_ena_per_port = {
.f = cmd_set_sym_hash_per_port_parsed,
.data = NULL,
- .help_str = "set_sym_hash_ena_per_port port_id enable|disable",
+ .help_str = "set_sym_hash_ena_per_port <port_id> enable|disable",
.tokens = {
(void *)&cmd_set_sym_hash_ena_per_port_all,
(void *)&cmd_set_sym_hash_ena_per_port_port_id,
{"ipv6-sctp", RTE_ETH_FLOW_NONFRAG_IPV6_SCTP},
{"ipv6-other", RTE_ETH_FLOW_NONFRAG_IPV6_OTHER},
{"l2_payload", RTE_ETH_FLOW_L2_PAYLOAD},
+ {"port", RTE_ETH_FLOW_PORT},
+ {"vxlan", RTE_ETH_FLOW_VXLAN},
+ {"geneve", RTE_ETH_FLOW_GENEVE},
+ {"nvgre", RTE_ETH_FLOW_NVGRE},
};
for (i = 0; i < RTE_DIM(ftype_table); i++) {
cmdline_parse_inst_t cmd_get_hash_global_config = {
.f = cmd_get_hash_global_config_parsed,
.data = NULL,
- .help_str = "get_hash_global_config port_id",
+ .help_str = "get_hash_global_config <port_id>",
.tokens = {
(void *)&cmd_get_hash_global_config_all,
(void *)&cmd_get_hash_global_config_port_id,
cmdline_parse_inst_t cmd_set_hash_global_config = {
.f = cmd_set_hash_global_config_parsed,
.data = NULL,
- .help_str = "set_hash_global_config port_id "
+ .help_str = "set_hash_global_config <port_id> "
"toeplitz|simple_xor|default "
- "ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|ipv6|"
- "ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|l2_payload "
- "enable|disable",
+ "ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|"
+ "ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|"
+ "l2_payload enable|disable",
.tokens = {
(void *)&cmd_set_hash_global_config_all,
(void *)&cmd_set_hash_global_config_port_id,
cmdline_parse_inst_t cmd_mcast_addr = {
.f = cmd_mcast_addr_parsed,
.data = (void *)0,
- .help_str = "mcast_addr add|remove X <mcast_addr>: add/remove multicast MAC address on port X",
+ .help_str = "mcast_addr add|remove <port_id> <mcast_addr>: "
+ "Add/Remove multicast MAC address on port_id",
.tokens = {
(void *)&cmd_mcast_addr_cmd,
(void *)&cmd_mcast_addr_what,
cmdline_parse_inst_t cmd_config_l2_tunnel_eth_type_all = {
.f = cmd_config_l2_tunnel_eth_type_all_parsed,
.data = NULL,
- .help_str = "port config all l2-tunnel ether-type",
+ .help_str = "port config all l2-tunnel E-tag ether-type <value>",
.tokens = {
(void *)&cmd_config_l2_tunnel_eth_type_port,
(void *)&cmd_config_l2_tunnel_eth_type_config,
cmdline_parse_inst_t cmd_config_l2_tunnel_eth_type_specific = {
.f = cmd_config_l2_tunnel_eth_type_specific_parsed,
.data = NULL,
- .help_str = "port config l2-tunnel ether-type",
+ .help_str = "port config <port_id> l2-tunnel E-tag ether-type <value>",
.tokens = {
(void *)&cmd_config_l2_tunnel_eth_type_port,
(void *)&cmd_config_l2_tunnel_eth_type_config,
cmdline_parse_inst_t cmd_config_l2_tunnel_en_dis_all = {
.f = cmd_config_l2_tunnel_en_dis_all_parsed,
.data = NULL,
- .help_str = "port config all l2-tunnel enable/disable",
+ .help_str = "port config all l2-tunnel E-tag enable|disable",
.tokens = {
(void *)&cmd_config_l2_tunnel_en_dis_port,
(void *)&cmd_config_l2_tunnel_en_dis_config,
cmdline_parse_inst_t cmd_config_l2_tunnel_en_dis_specific = {
.f = cmd_config_l2_tunnel_en_dis_specific_parsed,
.data = NULL,
- .help_str = "port config l2-tunnel enable/disable",
+ .help_str = "port config <port_id> l2-tunnel E-tag enable|disable",
.tokens = {
(void *)&cmd_config_l2_tunnel_en_dis_port,
(void *)&cmd_config_l2_tunnel_en_dis_config,
cmdline_parse_inst_t cmd_config_e_tag_insertion_en = {
.f = cmd_config_e_tag_insertion_en_parsed,
.data = NULL,
- .help_str = "E-tag insertion enable",
+ .help_str = "E-tag ... : E-tag insertion enable",
.tokens = {
(void *)&cmd_config_e_tag_e_tag,
(void *)&cmd_config_e_tag_set,
cmdline_parse_inst_t cmd_config_e_tag_insertion_dis = {
.f = cmd_config_e_tag_insertion_dis_parsed,
.data = NULL,
- .help_str = "E-tag insertion disable",
+ .help_str = "E-tag ... : E-tag insertion disable",
.tokens = {
(void *)&cmd_config_e_tag_e_tag,
(void *)&cmd_config_e_tag_set,
cmdline_parse_inst_t cmd_config_e_tag_stripping_en_dis = {
.f = cmd_config_e_tag_stripping_parsed,
.data = NULL,
- .help_str = "E-tag stripping enable/disable",
+ .help_str = "E-tag ... : E-tag stripping enable/disable",
.tokens = {
(void *)&cmd_config_e_tag_e_tag,
(void *)&cmd_config_e_tag_set,
cmdline_parse_inst_t cmd_config_e_tag_forwarding_en_dis = {
.f = cmd_config_e_tag_forwarding_parsed,
.data = NULL,
- .help_str = "E-tag forwarding enable/disable",
+ .help_str = "E-tag ... : E-tag forwarding enable/disable",
.tokens = {
(void *)&cmd_config_e_tag_e_tag,
(void *)&cmd_config_e_tag_set,
cmdline_parse_inst_t cmd_config_e_tag_filter_add = {
.f = cmd_config_e_tag_filter_add_parsed,
.data = NULL,
- .help_str = "E-tag filter add",
+ .help_str = "E-tag ... : E-tag filter add",
.tokens = {
(void *)&cmd_config_e_tag_e_tag,
(void *)&cmd_config_e_tag_set,
cmdline_parse_inst_t cmd_config_e_tag_filter_del = {
.f = cmd_config_e_tag_filter_del_parsed,
.data = NULL,
- .help_str = "E-tag filter delete",
+ .help_str = "E-tag ... : E-tag filter delete",
.tokens = {
(void *)&cmd_config_e_tag_e_tag,
(void *)&cmd_config_e_tag_set,
},
};
-/* ******************************************************************************** */
+/* vf vlan anti spoof configuration */
-/* list of instructions */
-cmdline_parse_ctx_t main_ctx[] = {
- (cmdline_parse_inst_t *)&cmd_help_brief,
- (cmdline_parse_inst_t *)&cmd_help_long,
- (cmdline_parse_inst_t *)&cmd_quit,
- (cmdline_parse_inst_t *)&cmd_showport,
- (cmdline_parse_inst_t *)&cmd_showqueue,
- (cmdline_parse_inst_t *)&cmd_showportall,
- (cmdline_parse_inst_t *)&cmd_showcfg,
- (cmdline_parse_inst_t *)&cmd_start,
- (cmdline_parse_inst_t *)&cmd_start_tx_first,
+/* Common result structure for vf vlan anti spoof */
+struct cmd_vf_vlan_anti_spoof_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t vf;
+ cmdline_fixed_string_t vlan;
+ cmdline_fixed_string_t antispoof;
+ uint8_t port_id;
+ uint32_t vf_id;
+ cmdline_fixed_string_t on_off;
+};
+
+/* Common CLI fields for vf vlan anti spoof enable disable */
+cmdline_parse_token_string_t cmd_vf_vlan_anti_spoof_set =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_vlan_anti_spoof_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_vf_vlan_anti_spoof_vf =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_vlan_anti_spoof_result,
+ vf, "vf");
+cmdline_parse_token_string_t cmd_vf_vlan_anti_spoof_vlan =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_vlan_anti_spoof_result,
+ vlan, "vlan");
+cmdline_parse_token_string_t cmd_vf_vlan_anti_spoof_antispoof =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_vlan_anti_spoof_result,
+ antispoof, "antispoof");
+cmdline_parse_token_num_t cmd_vf_vlan_anti_spoof_port_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_vf_vlan_anti_spoof_result,
+ port_id, UINT8);
+cmdline_parse_token_num_t cmd_vf_vlan_anti_spoof_vf_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_vf_vlan_anti_spoof_result,
+ vf_id, UINT32);
+cmdline_parse_token_string_t cmd_vf_vlan_anti_spoof_on_off =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_vlan_anti_spoof_result,
+ on_off, "on#off");
+
+static void
+cmd_set_vf_vlan_anti_spoof_parsed(
+ void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_vf_vlan_anti_spoof_result *res = parsed_result;
+ int ret = -ENOTSUP;
+
+ __rte_unused int is_on = (strcmp(res->on_off, "on") == 0) ? 1 : 0;
+
+ if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+ return;
+
+#ifdef RTE_LIBRTE_IXGBE_PMD
+ if (ret == -ENOTSUP)
+ ret = rte_pmd_ixgbe_set_vf_vlan_anti_spoof(res->port_id,
+ res->vf_id, is_on);
+#endif
+#ifdef RTE_LIBRTE_I40E_PMD
+ if (ret == -ENOTSUP)
+ ret = rte_pmd_i40e_set_vf_vlan_anti_spoof(res->port_id,
+ res->vf_id, is_on);
+#endif
+
+ switch (ret) {
+ case 0:
+ break;
+ case -EINVAL:
+ printf("invalid vf_id %d\n", res->vf_id);
+ break;
+ case -ENODEV:
+ printf("invalid port_id %d\n", res->port_id);
+ break;
+ case -ENOTSUP:
+ printf("function not implemented\n");
+ break;
+ default:
+ printf("programming error: (%s)\n", strerror(-ret));
+ }
+}
+
+cmdline_parse_inst_t cmd_set_vf_vlan_anti_spoof = {
+ .f = cmd_set_vf_vlan_anti_spoof_parsed,
+ .data = NULL,
+ .help_str = "set vf vlan antispoof <port_id> <vf_id> on|off",
+ .tokens = {
+ (void *)&cmd_vf_vlan_anti_spoof_set,
+ (void *)&cmd_vf_vlan_anti_spoof_vf,
+ (void *)&cmd_vf_vlan_anti_spoof_vlan,
+ (void *)&cmd_vf_vlan_anti_spoof_antispoof,
+ (void *)&cmd_vf_vlan_anti_spoof_port_id,
+ (void *)&cmd_vf_vlan_anti_spoof_vf_id,
+ (void *)&cmd_vf_vlan_anti_spoof_on_off,
+ NULL,
+ },
+};
+
+/* vf mac anti spoof configuration */
+
+/* Common result structure for vf mac anti spoof */
+struct cmd_vf_mac_anti_spoof_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t vf;
+ cmdline_fixed_string_t mac;
+ cmdline_fixed_string_t antispoof;
+ uint8_t port_id;
+ uint32_t vf_id;
+ cmdline_fixed_string_t on_off;
+};
+
+/* Common CLI fields for vf mac anti spoof enable disable */
+cmdline_parse_token_string_t cmd_vf_mac_anti_spoof_set =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_mac_anti_spoof_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_vf_mac_anti_spoof_vf =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_mac_anti_spoof_result,
+ vf, "vf");
+cmdline_parse_token_string_t cmd_vf_mac_anti_spoof_mac =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_mac_anti_spoof_result,
+ mac, "mac");
+cmdline_parse_token_string_t cmd_vf_mac_anti_spoof_antispoof =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_mac_anti_spoof_result,
+ antispoof, "antispoof");
+cmdline_parse_token_num_t cmd_vf_mac_anti_spoof_port_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_vf_mac_anti_spoof_result,
+ port_id, UINT8);
+cmdline_parse_token_num_t cmd_vf_mac_anti_spoof_vf_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_vf_mac_anti_spoof_result,
+ vf_id, UINT32);
+cmdline_parse_token_string_t cmd_vf_mac_anti_spoof_on_off =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_mac_anti_spoof_result,
+ on_off, "on#off");
+
+static void
+cmd_set_vf_mac_anti_spoof_parsed(
+ void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_vf_mac_anti_spoof_result *res = parsed_result;
+ int ret = -ENOTSUP;
+
+ __rte_unused int is_on = (strcmp(res->on_off, "on") == 0) ? 1 : 0;
+
+ if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+ return;
+
+#ifdef RTE_LIBRTE_IXGBE_PMD
+ if (ret == -ENOTSUP)
+ ret = rte_pmd_ixgbe_set_vf_mac_anti_spoof(res->port_id,
+ res->vf_id, is_on);
+#endif
+#ifdef RTE_LIBRTE_I40E_PMD
+ if (ret == -ENOTSUP)
+ ret = rte_pmd_i40e_set_vf_mac_anti_spoof(res->port_id,
+ res->vf_id, is_on);
+#endif
+
+ switch (ret) {
+ case 0:
+ break;
+ case -EINVAL:
+ printf("invalid vf_id %d or is_on %d\n", res->vf_id, is_on);
+ break;
+ case -ENODEV:
+ printf("invalid port_id %d\n", res->port_id);
+ break;
+ case -ENOTSUP:
+ printf("function not implemented\n");
+ break;
+ default:
+ printf("programming error: (%s)\n", strerror(-ret));
+ }
+}
+
+cmdline_parse_inst_t cmd_set_vf_mac_anti_spoof = {
+ .f = cmd_set_vf_mac_anti_spoof_parsed,
+ .data = NULL,
+ .help_str = "set vf mac antispoof <port_id> <vf_id> on|off",
+ .tokens = {
+ (void *)&cmd_vf_mac_anti_spoof_set,
+ (void *)&cmd_vf_mac_anti_spoof_vf,
+ (void *)&cmd_vf_mac_anti_spoof_mac,
+ (void *)&cmd_vf_mac_anti_spoof_antispoof,
+ (void *)&cmd_vf_mac_anti_spoof_port_id,
+ (void *)&cmd_vf_mac_anti_spoof_vf_id,
+ (void *)&cmd_vf_mac_anti_spoof_on_off,
+ NULL,
+ },
+};
+
+/* vf vlan strip queue configuration */
+
+/* Common result structure for vf mac anti spoof */
+struct cmd_vf_vlan_stripq_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t vf;
+ cmdline_fixed_string_t vlan;
+ cmdline_fixed_string_t stripq;
+ uint8_t port_id;
+ uint16_t vf_id;
+ cmdline_fixed_string_t on_off;
+};
+
+/* Common CLI fields for vf vlan strip enable disable */
+cmdline_parse_token_string_t cmd_vf_vlan_stripq_set =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_vlan_stripq_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_vf_vlan_stripq_vf =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_vlan_stripq_result,
+ vf, "vf");
+cmdline_parse_token_string_t cmd_vf_vlan_stripq_vlan =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_vlan_stripq_result,
+ vlan, "vlan");
+cmdline_parse_token_string_t cmd_vf_vlan_stripq_stripq =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_vlan_stripq_result,
+ stripq, "stripq");
+cmdline_parse_token_num_t cmd_vf_vlan_stripq_port_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_vf_vlan_stripq_result,
+ port_id, UINT8);
+cmdline_parse_token_num_t cmd_vf_vlan_stripq_vf_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_vf_vlan_stripq_result,
+ vf_id, UINT16);
+cmdline_parse_token_string_t cmd_vf_vlan_stripq_on_off =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_vlan_stripq_result,
+ on_off, "on#off");
+
+static void
+cmd_set_vf_vlan_stripq_parsed(
+ void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_vf_vlan_stripq_result *res = parsed_result;
+ int ret = -ENOTSUP;
+
+ __rte_unused int is_on = (strcmp(res->on_off, "on") == 0) ? 1 : 0;
+
+ if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+ return;
+
+#ifdef RTE_LIBRTE_IXGBE_PMD
+ if (ret == -ENOTSUP)
+ ret = rte_pmd_ixgbe_set_vf_vlan_stripq(res->port_id,
+ res->vf_id, is_on);
+#endif
+#ifdef RTE_LIBRTE_I40E_PMD
+ if (ret == -ENOTSUP)
+ ret = rte_pmd_i40e_set_vf_vlan_stripq(res->port_id,
+ res->vf_id, is_on);
+#endif
+
+ switch (ret) {
+ case 0:
+ break;
+ case -EINVAL:
+ printf("invalid vf_id %d or is_on %d\n", res->vf_id, is_on);
+ break;
+ case -ENODEV:
+ printf("invalid port_id %d\n", res->port_id);
+ break;
+ case -ENOTSUP:
+ printf("function not implemented\n");
+ break;
+ default:
+ printf("programming error: (%s)\n", strerror(-ret));
+ }
+}
+
+cmdline_parse_inst_t cmd_set_vf_vlan_stripq = {
+ .f = cmd_set_vf_vlan_stripq_parsed,
+ .data = NULL,
+ .help_str = "set vf vlan stripq <port_id> <vf_id> on|off",
+ .tokens = {
+ (void *)&cmd_vf_vlan_stripq_set,
+ (void *)&cmd_vf_vlan_stripq_vf,
+ (void *)&cmd_vf_vlan_stripq_vlan,
+ (void *)&cmd_vf_vlan_stripq_stripq,
+ (void *)&cmd_vf_vlan_stripq_port_id,
+ (void *)&cmd_vf_vlan_stripq_vf_id,
+ (void *)&cmd_vf_vlan_stripq_on_off,
+ NULL,
+ },
+};
+
+/* vf vlan insert configuration */
+
+/* Common result structure for vf vlan insert */
+struct cmd_vf_vlan_insert_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t vf;
+ cmdline_fixed_string_t vlan;
+ cmdline_fixed_string_t insert;
+ uint8_t port_id;
+ uint16_t vf_id;
+ uint16_t vlan_id;
+};
+
+/* Common CLI fields for vf vlan insert enable disable */
+cmdline_parse_token_string_t cmd_vf_vlan_insert_set =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_vlan_insert_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_vf_vlan_insert_vf =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_vlan_insert_result,
+ vf, "vf");
+cmdline_parse_token_string_t cmd_vf_vlan_insert_vlan =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_vlan_insert_result,
+ vlan, "vlan");
+cmdline_parse_token_string_t cmd_vf_vlan_insert_insert =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_vlan_insert_result,
+ insert, "insert");
+cmdline_parse_token_num_t cmd_vf_vlan_insert_port_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_vf_vlan_insert_result,
+ port_id, UINT8);
+cmdline_parse_token_num_t cmd_vf_vlan_insert_vf_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_vf_vlan_insert_result,
+ vf_id, UINT16);
+cmdline_parse_token_num_t cmd_vf_vlan_insert_vlan_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_vf_vlan_insert_result,
+ vlan_id, UINT16);
+
+static void
+cmd_set_vf_vlan_insert_parsed(
+ void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_vf_vlan_insert_result *res = parsed_result;
+ int ret = -ENOTSUP;
+
+ if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+ return;
+
+#ifdef RTE_LIBRTE_IXGBE_PMD
+ if (ret == -ENOTSUP)
+ ret = rte_pmd_ixgbe_set_vf_vlan_insert(res->port_id, res->vf_id,
+ res->vlan_id);
+#endif
+#ifdef RTE_LIBRTE_I40E_PMD
+ if (ret == -ENOTSUP)
+ ret = rte_pmd_i40e_set_vf_vlan_insert(res->port_id, res->vf_id,
+ res->vlan_id);
+#endif
+
+ switch (ret) {
+ case 0:
+ break;
+ case -EINVAL:
+ printf("invalid vf_id %d or vlan_id %d\n", res->vf_id, res->vlan_id);
+ break;
+ case -ENODEV:
+ printf("invalid port_id %d\n", res->port_id);
+ break;
+ case -ENOTSUP:
+ printf("function not implemented\n");
+ break;
+ default:
+ printf("programming error: (%s)\n", strerror(-ret));
+ }
+}
+
+cmdline_parse_inst_t cmd_set_vf_vlan_insert = {
+ .f = cmd_set_vf_vlan_insert_parsed,
+ .data = NULL,
+ .help_str = "set vf vlan insert <port_id> <vf_id> <vlan_id>",
+ .tokens = {
+ (void *)&cmd_vf_vlan_insert_set,
+ (void *)&cmd_vf_vlan_insert_vf,
+ (void *)&cmd_vf_vlan_insert_vlan,
+ (void *)&cmd_vf_vlan_insert_insert,
+ (void *)&cmd_vf_vlan_insert_port_id,
+ (void *)&cmd_vf_vlan_insert_vf_id,
+ (void *)&cmd_vf_vlan_insert_vlan_id,
+ NULL,
+ },
+};
+
+/* tx loopback configuration */
+
+/* Common result structure for tx loopback */
+struct cmd_tx_loopback_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t tx;
+ cmdline_fixed_string_t loopback;
+ uint8_t port_id;
+ cmdline_fixed_string_t on_off;
+};
+
+/* Common CLI fields for tx loopback enable disable */
+cmdline_parse_token_string_t cmd_tx_loopback_set =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_tx_loopback_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_tx_loopback_tx =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_tx_loopback_result,
+ tx, "tx");
+cmdline_parse_token_string_t cmd_tx_loopback_loopback =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_tx_loopback_result,
+ loopback, "loopback");
+cmdline_parse_token_num_t cmd_tx_loopback_port_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_tx_loopback_result,
+ port_id, UINT8);
+cmdline_parse_token_string_t cmd_tx_loopback_on_off =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_tx_loopback_result,
+ on_off, "on#off");
+
+static void
+cmd_set_tx_loopback_parsed(
+ void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_tx_loopback_result *res = parsed_result;
+ int ret = -ENOTSUP;
+
+ __rte_unused int is_on = (strcmp(res->on_off, "on") == 0) ? 1 : 0;
+
+ if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+ return;
+
+#ifdef RTE_LIBRTE_IXGBE_PMD
+ if (ret == -ENOTSUP)
+ ret = rte_pmd_ixgbe_set_tx_loopback(res->port_id, is_on);
+#endif
+#ifdef RTE_LIBRTE_I40E_PMD
+ if (ret == -ENOTSUP)
+ ret = rte_pmd_i40e_set_tx_loopback(res->port_id, is_on);
+#endif
+
+ switch (ret) {
+ case 0:
+ break;
+ case -EINVAL:
+ printf("invalid is_on %d\n", is_on);
+ break;
+ case -ENODEV:
+ printf("invalid port_id %d\n", res->port_id);
+ break;
+ case -ENOTSUP:
+ printf("function not implemented\n");
+ break;
+ default:
+ printf("programming error: (%s)\n", strerror(-ret));
+ }
+}
+
+cmdline_parse_inst_t cmd_set_tx_loopback = {
+ .f = cmd_set_tx_loopback_parsed,
+ .data = NULL,
+ .help_str = "set tx loopback <port_id> on|off",
+ .tokens = {
+ (void *)&cmd_tx_loopback_set,
+ (void *)&cmd_tx_loopback_tx,
+ (void *)&cmd_tx_loopback_loopback,
+ (void *)&cmd_tx_loopback_port_id,
+ (void *)&cmd_tx_loopback_on_off,
+ NULL,
+ },
+};
+
+#ifdef RTE_LIBRTE_IXGBE_PMD
+/* all queues drop enable configuration */
+
+/* Common result structure for all queues drop enable */
+struct cmd_all_queues_drop_en_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t all;
+ cmdline_fixed_string_t queues;
+ cmdline_fixed_string_t drop;
+ uint8_t port_id;
+ cmdline_fixed_string_t on_off;
+};
+
+/* Common CLI fields for tx loopback enable disable */
+cmdline_parse_token_string_t cmd_all_queues_drop_en_set =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_all_queues_drop_en_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_all_queues_drop_en_all =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_all_queues_drop_en_result,
+ all, "all");
+cmdline_parse_token_string_t cmd_all_queues_drop_en_queues =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_all_queues_drop_en_result,
+ queues, "queues");
+cmdline_parse_token_string_t cmd_all_queues_drop_en_drop =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_all_queues_drop_en_result,
+ drop, "drop");
+cmdline_parse_token_num_t cmd_all_queues_drop_en_port_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_all_queues_drop_en_result,
+ port_id, UINT8);
+cmdline_parse_token_string_t cmd_all_queues_drop_en_on_off =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_all_queues_drop_en_result,
+ on_off, "on#off");
+
+static void
+cmd_set_all_queues_drop_en_parsed(
+ void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_all_queues_drop_en_result *res = parsed_result;
+ int ret = 0;
+ int is_on = (strcmp(res->on_off, "on") == 0) ? 1 : 0;
+
+ if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+ return;
+
+ ret = rte_pmd_ixgbe_set_all_queues_drop_en(res->port_id, is_on);
+ switch (ret) {
+ case 0:
+ break;
+ case -EINVAL:
+ printf("invalid is_on %d\n", is_on);
+ break;
+ case -ENODEV:
+ printf("invalid port_id %d\n", res->port_id);
+ break;
+ case -ENOTSUP:
+ printf("function not implemented\n");
+ break;
+ default:
+ printf("programming error: (%s)\n", strerror(-ret));
+ }
+}
+
+cmdline_parse_inst_t cmd_set_all_queues_drop_en = {
+ .f = cmd_set_all_queues_drop_en_parsed,
+ .data = NULL,
+ .help_str = "set all queues drop <port_id> on|off",
+ .tokens = {
+ (void *)&cmd_all_queues_drop_en_set,
+ (void *)&cmd_all_queues_drop_en_all,
+ (void *)&cmd_all_queues_drop_en_queues,
+ (void *)&cmd_all_queues_drop_en_drop,
+ (void *)&cmd_all_queues_drop_en_port_id,
+ (void *)&cmd_all_queues_drop_en_on_off,
+ NULL,
+ },
+};
+
+/* vf split drop enable configuration */
+
+/* Common result structure for vf split drop enable */
+struct cmd_vf_split_drop_en_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t vf;
+ cmdline_fixed_string_t split;
+ cmdline_fixed_string_t drop;
+ uint8_t port_id;
+ uint16_t vf_id;
+ cmdline_fixed_string_t on_off;
+};
+
+/* Common CLI fields for vf split drop enable disable */
+cmdline_parse_token_string_t cmd_vf_split_drop_en_set =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_split_drop_en_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_vf_split_drop_en_vf =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_split_drop_en_result,
+ vf, "vf");
+cmdline_parse_token_string_t cmd_vf_split_drop_en_split =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_split_drop_en_result,
+ split, "split");
+cmdline_parse_token_string_t cmd_vf_split_drop_en_drop =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_split_drop_en_result,
+ drop, "drop");
+cmdline_parse_token_num_t cmd_vf_split_drop_en_port_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_vf_split_drop_en_result,
+ port_id, UINT8);
+cmdline_parse_token_num_t cmd_vf_split_drop_en_vf_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_vf_split_drop_en_result,
+ vf_id, UINT16);
+cmdline_parse_token_string_t cmd_vf_split_drop_en_on_off =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_split_drop_en_result,
+ on_off, "on#off");
+
+static void
+cmd_set_vf_split_drop_en_parsed(
+ void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_vf_split_drop_en_result *res = parsed_result;
+ int ret;
+ int is_on = (strcmp(res->on_off, "on") == 0) ? 1 : 0;
+
+ if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+ return;
+
+ ret = rte_pmd_ixgbe_set_vf_split_drop_en(res->port_id, res->vf_id,
+ is_on);
+ switch (ret) {
+ case 0:
+ break;
+ case -EINVAL:
+ printf("invalid vf_id %d or is_on %d\n", res->vf_id, is_on);
+ break;
+ case -ENODEV:
+ printf("invalid port_id %d\n", res->port_id);
+ break;
+ default:
+ printf("programming error: (%s)\n", strerror(-ret));
+ }
+}
+
+cmdline_parse_inst_t cmd_set_vf_split_drop_en = {
+ .f = cmd_set_vf_split_drop_en_parsed,
+ .data = NULL,
+ .help_str = "set vf split drop <port_id> <vf_id> on|off",
+ .tokens = {
+ (void *)&cmd_vf_split_drop_en_set,
+ (void *)&cmd_vf_split_drop_en_vf,
+ (void *)&cmd_vf_split_drop_en_split,
+ (void *)&cmd_vf_split_drop_en_drop,
+ (void *)&cmd_vf_split_drop_en_port_id,
+ (void *)&cmd_vf_split_drop_en_vf_id,
+ (void *)&cmd_vf_split_drop_en_on_off,
+ NULL,
+ },
+};
+#endif
+
+/* vf mac address configuration */
+
+/* Common result structure for vf mac address */
+struct cmd_set_vf_mac_addr_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t vf;
+ cmdline_fixed_string_t mac;
+ cmdline_fixed_string_t addr;
+ uint8_t port_id;
+ uint16_t vf_id;
+ struct ether_addr mac_addr;
+
+};
+
+/* Common CLI fields for vf split drop enable disable */
+cmdline_parse_token_string_t cmd_set_vf_mac_addr_set =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_set_vf_mac_addr_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_set_vf_mac_addr_vf =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_set_vf_mac_addr_result,
+ vf, "vf");
+cmdline_parse_token_string_t cmd_set_vf_mac_addr_mac =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_set_vf_mac_addr_result,
+ mac, "mac");
+cmdline_parse_token_string_t cmd_set_vf_mac_addr_addr =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_set_vf_mac_addr_result,
+ addr, "addr");
+cmdline_parse_token_num_t cmd_set_vf_mac_addr_port_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_set_vf_mac_addr_result,
+ port_id, UINT8);
+cmdline_parse_token_num_t cmd_set_vf_mac_addr_vf_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_set_vf_mac_addr_result,
+ vf_id, UINT16);
+cmdline_parse_token_etheraddr_t cmd_set_vf_mac_addr_mac_addr =
+ TOKEN_ETHERADDR_INITIALIZER(struct cmd_set_vf_mac_addr_result,
+ mac_addr);
+
+static void
+cmd_set_vf_mac_addr_parsed(
+ void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_set_vf_mac_addr_result *res = parsed_result;
+ int ret = -ENOTSUP;
+
+ if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+ return;
+
+#ifdef RTE_LIBRTE_IXGBE_PMD
+ if (ret == -ENOTSUP)
+ ret = rte_pmd_ixgbe_set_vf_mac_addr(res->port_id, res->vf_id,
+ &res->mac_addr);
+#endif
+#ifdef RTE_LIBRTE_I40E_PMD
+ if (ret == -ENOTSUP)
+ ret = rte_pmd_i40e_set_vf_mac_addr(res->port_id, res->vf_id,
+ &res->mac_addr);
+#endif
+
+ switch (ret) {
+ case 0:
+ break;
+ case -EINVAL:
+ printf("invalid vf_id %d or mac_addr\n", res->vf_id);
+ break;
+ case -ENODEV:
+ printf("invalid port_id %d\n", res->port_id);
+ break;
+ case -ENOTSUP:
+ printf("function not implemented\n");
+ break;
+ default:
+ printf("programming error: (%s)\n", strerror(-ret));
+ }
+}
+
+cmdline_parse_inst_t cmd_set_vf_mac_addr = {
+ .f = cmd_set_vf_mac_addr_parsed,
+ .data = NULL,
+ .help_str = "set vf mac addr <port_id> <vf_id> <mac_addr>",
+ .tokens = {
+ (void *)&cmd_set_vf_mac_addr_set,
+ (void *)&cmd_set_vf_mac_addr_vf,
+ (void *)&cmd_set_vf_mac_addr_mac,
+ (void *)&cmd_set_vf_mac_addr_addr,
+ (void *)&cmd_set_vf_mac_addr_port_id,
+ (void *)&cmd_set_vf_mac_addr_vf_id,
+ (void *)&cmd_set_vf_mac_addr_mac_addr,
+ NULL,
+ },
+};
+
+#ifdef RTE_LIBRTE_IXGBE_PMD
+/* MACsec configuration */
+
+/* Common result structure for MACsec offload enable */
+struct cmd_macsec_offload_on_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t macsec;
+ cmdline_fixed_string_t offload;
+ uint8_t port_id;
+ cmdline_fixed_string_t on;
+ cmdline_fixed_string_t encrypt;
+ cmdline_fixed_string_t en_on_off;
+ cmdline_fixed_string_t replay_protect;
+ cmdline_fixed_string_t rp_on_off;
+};
+
+/* Common CLI fields for MACsec offload disable */
+cmdline_parse_token_string_t cmd_macsec_offload_on_set =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_offload_on_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_macsec_offload_on_macsec =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_offload_on_result,
+ macsec, "macsec");
+cmdline_parse_token_string_t cmd_macsec_offload_on_offload =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_offload_on_result,
+ offload, "offload");
+cmdline_parse_token_num_t cmd_macsec_offload_on_port_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_macsec_offload_on_result,
+ port_id, UINT8);
+cmdline_parse_token_string_t cmd_macsec_offload_on_on =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_offload_on_result,
+ on, "on");
+cmdline_parse_token_string_t cmd_macsec_offload_on_encrypt =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_offload_on_result,
+ encrypt, "encrypt");
+cmdline_parse_token_string_t cmd_macsec_offload_on_en_on_off =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_offload_on_result,
+ en_on_off, "on#off");
+cmdline_parse_token_string_t cmd_macsec_offload_on_replay_protect =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_offload_on_result,
+ replay_protect, "replay-protect");
+cmdline_parse_token_string_t cmd_macsec_offload_on_rp_on_off =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_offload_on_result,
+ rp_on_off, "on#off");
+
+static void
+cmd_set_macsec_offload_on_parsed(
+ void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_macsec_offload_on_result *res = parsed_result;
+ int ret;
+ portid_t port_id = res->port_id;
+ int en = (strcmp(res->en_on_off, "on") == 0) ? 1 : 0;
+ int rp = (strcmp(res->rp_on_off, "on") == 0) ? 1 : 0;
+
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
+ return;
+
+ ports[port_id].tx_ol_flags |= TESTPMD_TX_OFFLOAD_MACSEC;
+ ret = rte_pmd_ixgbe_macsec_enable(port_id, en, rp);
+
+ switch (ret) {
+ case 0:
+ break;
+ case -ENODEV:
+ printf("invalid port_id %d\n", port_id);
+ break;
+ default:
+ printf("programming error: (%s)\n", strerror(-ret));
+ }
+}
+
+cmdline_parse_inst_t cmd_set_macsec_offload_on = {
+ .f = cmd_set_macsec_offload_on_parsed,
+ .data = NULL,
+ .help_str = "set macsec offload <port_id> on "
+ "encrypt on|off replay-protect on|off",
+ .tokens = {
+ (void *)&cmd_macsec_offload_on_set,
+ (void *)&cmd_macsec_offload_on_macsec,
+ (void *)&cmd_macsec_offload_on_offload,
+ (void *)&cmd_macsec_offload_on_port_id,
+ (void *)&cmd_macsec_offload_on_on,
+ (void *)&cmd_macsec_offload_on_encrypt,
+ (void *)&cmd_macsec_offload_on_en_on_off,
+ (void *)&cmd_macsec_offload_on_replay_protect,
+ (void *)&cmd_macsec_offload_on_rp_on_off,
+ NULL,
+ },
+};
+
+/* Common result structure for MACsec offload disable */
+struct cmd_macsec_offload_off_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t macsec;
+ cmdline_fixed_string_t offload;
+ uint8_t port_id;
+ cmdline_fixed_string_t off;
+};
+
+/* Common CLI fields for MACsec offload disable */
+cmdline_parse_token_string_t cmd_macsec_offload_off_set =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_offload_off_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_macsec_offload_off_macsec =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_offload_off_result,
+ macsec, "macsec");
+cmdline_parse_token_string_t cmd_macsec_offload_off_offload =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_offload_off_result,
+ offload, "offload");
+cmdline_parse_token_num_t cmd_macsec_offload_off_port_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_macsec_offload_off_result,
+ port_id, UINT8);
+cmdline_parse_token_string_t cmd_macsec_offload_off_off =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_offload_off_result,
+ off, "off");
+
+static void
+cmd_set_macsec_offload_off_parsed(
+ void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_macsec_offload_off_result *res = parsed_result;
+ int ret;
+ portid_t port_id = res->port_id;
+
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
+ return;
+
+ ports[port_id].tx_ol_flags &= ~TESTPMD_TX_OFFLOAD_MACSEC;
+ ret = rte_pmd_ixgbe_macsec_disable(port_id);
+
+ switch (ret) {
+ case 0:
+ break;
+ case -ENODEV:
+ printf("invalid port_id %d\n", port_id);
+ break;
+ default:
+ printf("programming error: (%s)\n", strerror(-ret));
+ }
+}
+
+cmdline_parse_inst_t cmd_set_macsec_offload_off = {
+ .f = cmd_set_macsec_offload_off_parsed,
+ .data = NULL,
+ .help_str = "set macsec offload <port_id> off",
+ .tokens = {
+ (void *)&cmd_macsec_offload_off_set,
+ (void *)&cmd_macsec_offload_off_macsec,
+ (void *)&cmd_macsec_offload_off_offload,
+ (void *)&cmd_macsec_offload_off_port_id,
+ (void *)&cmd_macsec_offload_off_off,
+ NULL,
+ },
+};
+
+/* Common result structure for MACsec secure connection configure */
+struct cmd_macsec_sc_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t macsec;
+ cmdline_fixed_string_t sc;
+ cmdline_fixed_string_t tx_rx;
+ uint8_t port_id;
+ struct ether_addr mac;
+ uint16_t pi;
+};
+
+/* Common CLI fields for MACsec secure connection configure */
+cmdline_parse_token_string_t cmd_macsec_sc_set =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_sc_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_macsec_sc_macsec =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_sc_result,
+ macsec, "macsec");
+cmdline_parse_token_string_t cmd_macsec_sc_sc =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_sc_result,
+ sc, "sc");
+cmdline_parse_token_string_t cmd_macsec_sc_tx_rx =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_sc_result,
+ tx_rx, "tx#rx");
+cmdline_parse_token_num_t cmd_macsec_sc_port_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_macsec_sc_result,
+ port_id, UINT8);
+cmdline_parse_token_etheraddr_t cmd_macsec_sc_mac =
+ TOKEN_ETHERADDR_INITIALIZER
+ (struct cmd_macsec_sc_result,
+ mac);
+cmdline_parse_token_num_t cmd_macsec_sc_pi =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_macsec_sc_result,
+ pi, UINT16);
+
+static void
+cmd_set_macsec_sc_parsed(
+ void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_macsec_sc_result *res = parsed_result;
+ int ret;
+ int is_tx = (strcmp(res->tx_rx, "tx") == 0) ? 1 : 0;
+
+ ret = is_tx ?
+ rte_pmd_ixgbe_macsec_config_txsc(res->port_id,
+ res->mac.addr_bytes) :
+ rte_pmd_ixgbe_macsec_config_rxsc(res->port_id,
+ res->mac.addr_bytes, res->pi);
+ switch (ret) {
+ case 0:
+ break;
+ case -ENODEV:
+ printf("invalid port_id %d\n", res->port_id);
+ break;
+ default:
+ printf("programming error: (%s)\n", strerror(-ret));
+ }
+}
+
+cmdline_parse_inst_t cmd_set_macsec_sc = {
+ .f = cmd_set_macsec_sc_parsed,
+ .data = NULL,
+ .help_str = "set macsec sc tx|rx <port_id> <mac> <pi>",
+ .tokens = {
+ (void *)&cmd_macsec_sc_set,
+ (void *)&cmd_macsec_sc_macsec,
+ (void *)&cmd_macsec_sc_sc,
+ (void *)&cmd_macsec_sc_tx_rx,
+ (void *)&cmd_macsec_sc_port_id,
+ (void *)&cmd_macsec_sc_mac,
+ (void *)&cmd_macsec_sc_pi,
+ NULL,
+ },
+};
+
+/* Common result structure for MACsec secure connection configure */
+struct cmd_macsec_sa_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t macsec;
+ cmdline_fixed_string_t sa;
+ cmdline_fixed_string_t tx_rx;
+ uint8_t port_id;
+ uint8_t idx;
+ uint8_t an;
+ uint32_t pn;
+ cmdline_fixed_string_t key;
+};
+
+/* Common CLI fields for MACsec secure connection configure */
+cmdline_parse_token_string_t cmd_macsec_sa_set =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_sa_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_macsec_sa_macsec =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_sa_result,
+ macsec, "macsec");
+cmdline_parse_token_string_t cmd_macsec_sa_sa =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_sa_result,
+ sa, "sa");
+cmdline_parse_token_string_t cmd_macsec_sa_tx_rx =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_sa_result,
+ tx_rx, "tx#rx");
+cmdline_parse_token_num_t cmd_macsec_sa_port_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_macsec_sa_result,
+ port_id, UINT8);
+cmdline_parse_token_num_t cmd_macsec_sa_idx =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_macsec_sa_result,
+ idx, UINT8);
+cmdline_parse_token_num_t cmd_macsec_sa_an =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_macsec_sa_result,
+ an, UINT8);
+cmdline_parse_token_num_t cmd_macsec_sa_pn =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_macsec_sa_result,
+ pn, UINT32);
+cmdline_parse_token_string_t cmd_macsec_sa_key =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_macsec_sa_result,
+ key, NULL);
+
+static void
+cmd_set_macsec_sa_parsed(
+ void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_macsec_sa_result *res = parsed_result;
+ int ret;
+ int is_tx = (strcmp(res->tx_rx, "tx") == 0) ? 1 : 0;
+ uint8_t key[16] = { 0 };
+ uint8_t xdgt0;
+ uint8_t xdgt1;
+ int key_len;
+ int i;
+
+ key_len = strlen(res->key) / 2;
+ if (key_len > 16)
+ key_len = 16;
+
+ for (i = 0; i < key_len; i++) {
+ xdgt0 = parse_and_check_key_hexa_digit(res->key, (i * 2));
+ if (xdgt0 == 0xFF)
+ return;
+ xdgt1 = parse_and_check_key_hexa_digit(res->key, (i * 2) + 1);
+ if (xdgt1 == 0xFF)
+ return;
+ key[i] = (uint8_t) ((xdgt0 * 16) + xdgt1);
+ }
+
+ ret = is_tx ?
+ rte_pmd_ixgbe_macsec_select_txsa(res->port_id,
+ res->idx, res->an, res->pn, key) :
+ rte_pmd_ixgbe_macsec_select_rxsa(res->port_id,
+ res->idx, res->an, res->pn, key);
+ switch (ret) {
+ case 0:
+ break;
+ case -EINVAL:
+ printf("invalid idx %d or an %d\n", res->idx, res->an);
+ break;
+ case -ENODEV:
+ printf("invalid port_id %d\n", res->port_id);
+ break;
+ default:
+ printf("programming error: (%s)\n", strerror(-ret));
+ }
+}
+
+cmdline_parse_inst_t cmd_set_macsec_sa = {
+ .f = cmd_set_macsec_sa_parsed,
+ .data = NULL,
+ .help_str = "set macsec sa tx|rx <port_id> <idx> <an> <pn> <key>",
+ .tokens = {
+ (void *)&cmd_macsec_sa_set,
+ (void *)&cmd_macsec_sa_macsec,
+ (void *)&cmd_macsec_sa_sa,
+ (void *)&cmd_macsec_sa_tx_rx,
+ (void *)&cmd_macsec_sa_port_id,
+ (void *)&cmd_macsec_sa_idx,
+ (void *)&cmd_macsec_sa_an,
+ (void *)&cmd_macsec_sa_pn,
+ (void *)&cmd_macsec_sa_key,
+ NULL,
+ },
+};
+#endif
+
+/* VF unicast promiscuous mode configuration */
+
+/* Common result structure for VF unicast promiscuous mode */
+struct cmd_vf_promisc_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t vf;
+ cmdline_fixed_string_t promisc;
+ uint8_t port_id;
+ uint32_t vf_id;
+ cmdline_fixed_string_t on_off;
+};
+
+/* Common CLI fields for VF unicast promiscuous mode enable disable */
+cmdline_parse_token_string_t cmd_vf_promisc_set =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_promisc_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_vf_promisc_vf =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_promisc_result,
+ vf, "vf");
+cmdline_parse_token_string_t cmd_vf_promisc_promisc =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_promisc_result,
+ promisc, "promisc");
+cmdline_parse_token_num_t cmd_vf_promisc_port_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_vf_promisc_result,
+ port_id, UINT8);
+cmdline_parse_token_num_t cmd_vf_promisc_vf_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_vf_promisc_result,
+ vf_id, UINT32);
+cmdline_parse_token_string_t cmd_vf_promisc_on_off =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_promisc_result,
+ on_off, "on#off");
+
+static void
+cmd_set_vf_promisc_parsed(
+ void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_vf_promisc_result *res = parsed_result;
+ int ret = -ENOTSUP;
+
+ __rte_unused int is_on = (strcmp(res->on_off, "on") == 0) ? 1 : 0;
+
+ if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+ return;
+
+#ifdef RTE_LIBRTE_I40E_PMD
+ ret = rte_pmd_i40e_set_vf_unicast_promisc(res->port_id,
+ res->vf_id, is_on);
+#endif
+
+ switch (ret) {
+ case 0:
+ break;
+ case -EINVAL:
+ printf("invalid vf_id %d\n", res->vf_id);
+ break;
+ case -ENODEV:
+ printf("invalid port_id %d\n", res->port_id);
+ break;
+ case -ENOTSUP:
+ printf("function not implemented\n");
+ break;
+ default:
+ printf("programming error: (%s)\n", strerror(-ret));
+ }
+}
+
+cmdline_parse_inst_t cmd_set_vf_promisc = {
+ .f = cmd_set_vf_promisc_parsed,
+ .data = NULL,
+ .help_str = "set vf promisc <port_id> <vf_id> on|off: "
+ "Set unicast promiscuous mode for a VF from the PF",
+ .tokens = {
+ (void *)&cmd_vf_promisc_set,
+ (void *)&cmd_vf_promisc_vf,
+ (void *)&cmd_vf_promisc_promisc,
+ (void *)&cmd_vf_promisc_port_id,
+ (void *)&cmd_vf_promisc_vf_id,
+ (void *)&cmd_vf_promisc_on_off,
+ NULL,
+ },
+};
+
+/* VF multicast promiscuous mode configuration */
+
+/* Common result structure for VF multicast promiscuous mode */
+struct cmd_vf_allmulti_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t vf;
+ cmdline_fixed_string_t allmulti;
+ uint8_t port_id;
+ uint32_t vf_id;
+ cmdline_fixed_string_t on_off;
+};
+
+/* Common CLI fields for VF multicast promiscuous mode enable disable */
+cmdline_parse_token_string_t cmd_vf_allmulti_set =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_allmulti_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_vf_allmulti_vf =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_allmulti_result,
+ vf, "vf");
+cmdline_parse_token_string_t cmd_vf_allmulti_allmulti =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_allmulti_result,
+ allmulti, "allmulti");
+cmdline_parse_token_num_t cmd_vf_allmulti_port_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_vf_allmulti_result,
+ port_id, UINT8);
+cmdline_parse_token_num_t cmd_vf_allmulti_vf_id =
+ TOKEN_NUM_INITIALIZER
+ (struct cmd_vf_allmulti_result,
+ vf_id, UINT32);
+cmdline_parse_token_string_t cmd_vf_allmulti_on_off =
+ TOKEN_STRING_INITIALIZER
+ (struct cmd_vf_allmulti_result,
+ on_off, "on#off");
+
+static void
+cmd_set_vf_allmulti_parsed(
+ void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_vf_allmulti_result *res = parsed_result;
+ int ret = -ENOTSUP;
+
+ __rte_unused int is_on = (strcmp(res->on_off, "on") == 0) ? 1 : 0;
+
+ if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+ return;
+
+#ifdef RTE_LIBRTE_I40E_PMD
+ ret = rte_pmd_i40e_set_vf_multicast_promisc(res->port_id,
+ res->vf_id, is_on);
+#endif
+
+ switch (ret) {
+ case 0:
+ break;
+ case -EINVAL:
+ printf("invalid vf_id %d\n", res->vf_id);
+ break;
+ case -ENODEV:
+ printf("invalid port_id %d\n", res->port_id);
+ break;
+ case -ENOTSUP:
+ printf("function not implemented\n");
+ break;
+ default:
+ printf("programming error: (%s)\n", strerror(-ret));
+ }
+}
+
+cmdline_parse_inst_t cmd_set_vf_allmulti = {
+ .f = cmd_set_vf_allmulti_parsed,
+ .data = NULL,
+ .help_str = "set vf allmulti <port_id> <vf_id> on|off: "
+ "Set multicast promiscuous mode for a VF from the PF",
+ .tokens = {
+ (void *)&cmd_vf_allmulti_set,
+ (void *)&cmd_vf_allmulti_vf,
+ (void *)&cmd_vf_allmulti_allmulti,
+ (void *)&cmd_vf_allmulti_port_id,
+ (void *)&cmd_vf_allmulti_vf_id,
+ (void *)&cmd_vf_allmulti_on_off,
+ NULL,
+ },
+};
+
+/* ******************************************************************************** */
+
+/* list of instructions */
+cmdline_parse_ctx_t main_ctx[] = {
+ (cmdline_parse_inst_t *)&cmd_help_brief,
+ (cmdline_parse_inst_t *)&cmd_help_long,
+ (cmdline_parse_inst_t *)&cmd_quit,
+ (cmdline_parse_inst_t *)&cmd_showport,
+ (cmdline_parse_inst_t *)&cmd_showqueue,
+ (cmdline_parse_inst_t *)&cmd_showportall,
+ (cmdline_parse_inst_t *)&cmd_showcfg,
+ (cmdline_parse_inst_t *)&cmd_start,
+ (cmdline_parse_inst_t *)&cmd_start_tx_first,
+ (cmdline_parse_inst_t *)&cmd_start_tx_first_n,
(cmdline_parse_inst_t *)&cmd_set_link_up,
(cmdline_parse_inst_t *)&cmd_set_link_down,
(cmdline_parse_inst_t *)&cmd_reset,
(cmdline_parse_inst_t *)&cmd_set_fwd_list,
(cmdline_parse_inst_t *)&cmd_set_fwd_mask,
(cmdline_parse_inst_t *)&cmd_set_fwd_mode,
+ (cmdline_parse_inst_t *)&cmd_set_fwd_retry_mode,
(cmdline_parse_inst_t *)&cmd_set_burst_tx_retry,
(cmdline_parse_inst_t *)&cmd_set_promisc_mode_one,
(cmdline_parse_inst_t *)&cmd_set_promisc_mode_all,
(cmdline_parse_inst_t *)&cmd_csum_tunnel,
(cmdline_parse_inst_t *)&cmd_tso_set,
(cmdline_parse_inst_t *)&cmd_tso_show,
+ (cmdline_parse_inst_t *)&cmd_tunnel_tso_set,
+ (cmdline_parse_inst_t *)&cmd_tunnel_tso_show,
(cmdline_parse_inst_t *)&cmd_link_flow_control_set,
(cmdline_parse_inst_t *)&cmd_link_flow_control_set_rx,
(cmdline_parse_inst_t *)&cmd_link_flow_control_set_tx,
(cmdline_parse_inst_t *)&cmd_config_rx_mode_flag,
(cmdline_parse_inst_t *)&cmd_config_rss,
(cmdline_parse_inst_t *)&cmd_config_rxtx_queue,
+ (cmdline_parse_inst_t *)&cmd_config_txqflags,
(cmdline_parse_inst_t *)&cmd_config_rss_reta,
(cmdline_parse_inst_t *)&cmd_showport_reta,
(cmdline_parse_inst_t *)&cmd_config_burst,
(cmdline_parse_inst_t *)&cmd_config_thresh,
(cmdline_parse_inst_t *)&cmd_config_threshold,
- (cmdline_parse_inst_t *)&cmd_set_vf_rxmode,
(cmdline_parse_inst_t *)&cmd_set_uc_hash_filter,
(cmdline_parse_inst_t *)&cmd_set_uc_all_hash_filter,
(cmdline_parse_inst_t *)&cmd_vf_mac_addr_filter,
(cmdline_parse_inst_t *)&cmd_set_vf_macvlan_filter,
- (cmdline_parse_inst_t *)&cmd_set_vf_traffic,
- (cmdline_parse_inst_t *)&cmd_vf_rxvlan_filter,
(cmdline_parse_inst_t *)&cmd_queue_rate_limit,
- (cmdline_parse_inst_t *)&cmd_vf_rate_limit,
(cmdline_parse_inst_t *)&cmd_tunnel_filter,
(cmdline_parse_inst_t *)&cmd_tunnel_udp_config,
(cmdline_parse_inst_t *)&cmd_global_config,
(cmdline_parse_inst_t *)&cmd_set_hash_global_config,
(cmdline_parse_inst_t *)&cmd_set_hash_input_set,
(cmdline_parse_inst_t *)&cmd_set_fdir_input_set,
+ (cmdline_parse_inst_t *)&cmd_flow,
(cmdline_parse_inst_t *)&cmd_mcast_addr,
(cmdline_parse_inst_t *)&cmd_config_l2_tunnel_eth_type_all,
(cmdline_parse_inst_t *)&cmd_config_l2_tunnel_eth_type_specific,
(cmdline_parse_inst_t *)&cmd_config_e_tag_forwarding_en_dis,
(cmdline_parse_inst_t *)&cmd_config_e_tag_filter_add,
(cmdline_parse_inst_t *)&cmd_config_e_tag_filter_del,
+ (cmdline_parse_inst_t *)&cmd_set_vf_vlan_anti_spoof,
+ (cmdline_parse_inst_t *)&cmd_set_vf_mac_anti_spoof,
+ (cmdline_parse_inst_t *)&cmd_set_vf_vlan_stripq,
+ (cmdline_parse_inst_t *)&cmd_set_vf_vlan_insert,
+ (cmdline_parse_inst_t *)&cmd_set_tx_loopback,
+#ifdef RTE_LIBRTE_IXGBE_PMD
+ (cmdline_parse_inst_t *)&cmd_set_all_queues_drop_en,
+ (cmdline_parse_inst_t *)&cmd_set_vf_split_drop_en,
+ (cmdline_parse_inst_t *)&cmd_set_macsec_offload_on,
+ (cmdline_parse_inst_t *)&cmd_set_macsec_offload_off,
+ (cmdline_parse_inst_t *)&cmd_set_macsec_sc,
+ (cmdline_parse_inst_t *)&cmd_set_macsec_sa,
+ (cmdline_parse_inst_t *)&cmd_set_vf_rxmode,
+ (cmdline_parse_inst_t *)&cmd_set_vf_traffic,
+ (cmdline_parse_inst_t *)&cmd_vf_rxvlan_filter,
+ (cmdline_parse_inst_t *)&cmd_vf_rate_limit,
+#endif
+ (cmdline_parse_inst_t *)&cmd_set_vf_mac_addr,
+ (cmdline_parse_inst_t *)&cmd_set_vf_promisc,
+ (cmdline_parse_inst_t *)&cmd_set_vf_allmulti,
NULL,
};
{
/* initialize non-constant commands */
cmd_set_fwd_mode_init();
+ cmd_set_fwd_retry_mode_init();
testpmd_cl = cmdline_stdin_new(main_ctx, "testpmd> ");
if (testpmd_cl == NULL)
ports[id].need_reconfig_queues = queue;
}
}
-
-#ifdef RTE_NIC_BYPASS
-#include <rte_pci_dev_ids.h>
-uint8_t
-bypass_is_supported(portid_t port_id)
-{
- struct rte_port *port;
- struct rte_pci_id *pci_id;
-
- if (port_id_is_invalid(port_id, ENABLED_WARN))
- return 0;
-
- /* Get the device id. */
- port = &ports[port_id];
- pci_id = &port->dev_info.pci_dev->id;
-
- /* Check if NIC supports bypass. */
- if (pci_id->device_id == IXGBE_DEV_ID_82599_BYPASS) {
- return 1;
- }
- else {
- printf("\tBypass not supported for port_id = %d.\n", port_id);
- return 0;
- }
-}
-#endif