"[--help|-h] | [--auto-start|-a] | ["
"--tx-first | --stats-period=PERIOD | "
"--coremask=COREMASK --portmask=PORTMASK --numa "
+ "--portlist=PORTLIST "
"--mbuf-size= | --total-num-mbufs= | "
"--nb-cores= | --nb-ports= | "
#ifdef RTE_LIBRTE_CMDLINE
"packet forwarding.\n");
printf(" --portmask=PORTMASK: hexadecimal bitmask of ports used "
"by the packet forwarding test.\n");
+ printf(" --portlist=PORTLIST: list of forwarding ports\n");
printf(" --numa: enable NUMA-aware allocation of RX/TX rings and of "
"RX memory buffers (mbufs).\n");
printf(" --port-numa-config=(port,socket)[,(port,socket)]: "
printf(" --total-num-mbufs=N: set the number of mbufs to be allocated "
"in mbuf pools.\n");
printf(" --max-pkt-len=N: set the maximum size of packet to N bytes.\n");
+ printf(" --max-lro-pkt-size=N: set the maximum LRO aggregated packet "
+ "size to N bytes.\n");
#ifdef RTE_LIBRTE_CMDLINE
printf(" --eth-peers-configfile=name: config file with ethernet addresses "
"of peer ports.\n");
printf(" --enable-hw-qinq-strip: enable hardware qinq strip.\n");
printf(" --enable-drop-en: enable per queue packet drop.\n");
printf(" --disable-rss: disable rss.\n");
- printf(" --port-topology=N: set port topology (N: paired (default) or "
- "chained).\n");
+ printf(" --port-topology=<paired|chained|loop>: set port topology (paired "
+ "is default).\n");
printf(" --forward-mode=N: set forwarding mode (N: %s).\n",
list_pkt_forwarding_modes());
printf(" --rss-ip: set RSS functions to IPv4/IPv6 only .\n");
printf(" --rxd=N: set the number of descriptors in RX rings to N.\n");
printf(" --txq=N: set the number of TX queues per port to N.\n");
printf(" --txd=N: set the number of descriptors in TX rings to N.\n");
+ printf(" --hairpinq=N: set the number of hairpin queues per port to "
+ "N.\n");
printf(" --burst=N: set the number of packets per burst to N.\n");
printf(" --mbcache=N: set the cache of mbuf memory pool to N.\n");
printf(" --rxpt=N: set prefetch threshold register of RX rings to N.\n");
{ "nb-ports", 1, 0, 0 },
{ "coremask", 1, 0, 0 },
{ "portmask", 1, 0, 0 },
+ { "portlist", 1, 0, 0 },
{ "numa", 0, 0, 0 },
{ "no-numa", 0, 0, 0 },
{ "mp-anon", 0, 0, 0 },
{ "mbuf-size", 1, 0, 0 },
{ "total-num-mbufs", 1, 0, 0 },
{ "max-pkt-len", 1, 0, 0 },
+ { "max-lro-pkt-size", 1, 0, 0 },
{ "pkt-filter-mode", 1, 0, 0 },
{ "pkt-filter-report-hash", 1, 0, 0 },
{ "pkt-filter-size", 1, 0, 0 },
{ "txq", 1, 0, 0 },
{ "rxd", 1, 0, 0 },
{ "txd", 1, 0, 0 },
+ { "hairpinq", 1, 0, 0 },
{ "burst", 1, 0, 0 },
{ "mbcache", 1, 0, 0 },
{ "txpt", 1, 0, 0 },
parse_fwd_coremask(optarg);
if (!strcmp(lgopts[opt_idx].name, "portmask"))
parse_fwd_portmask(optarg);
+ if (!strcmp(lgopts[opt_idx].name, "portlist"))
+ parse_fwd_portlist(optarg);
if (!strcmp(lgopts[opt_idx].name, "no-numa"))
numa_support = 0;
if (!strcmp(lgopts[opt_idx].name, "numa"))
mp_alloc_type = MP_ALLOC_XMEM;
else if (!strcmp(optarg, "xmemhuge"))
mp_alloc_type = MP_ALLOC_XMEM_HUGE;
+ else if (!strcmp(optarg, "xbuf"))
+ mp_alloc_type = MP_ALLOC_XBUF;
else
rte_exit(EXIT_FAILURE,
"mp-alloc %s invalid - must be: "
"Invalid max-pkt-len=%d - should be > %d\n",
n, RTE_ETHER_MIN_LEN);
}
+ if (!strcmp(lgopts[opt_idx].name, "max-lro-pkt-size")) {
+ n = atoi(optarg);
+ rx_mode.max_lro_pkt_size = (uint32_t) n;
+ }
if (!strcmp(lgopts[opt_idx].name, "pkt-filter-mode")) {
if (!strcmp(optarg, "signature"))
fdir_conf.mode =
" >= 0 && <= %u\n", n,
get_allowed_max_nb_txq(&pid));
}
+ if (!strcmp(lgopts[opt_idx].name, "hairpinq")) {
+ n = atoi(optarg);
+ if (n >= 0 &&
+ check_nb_hairpinq((queueid_t)n) == 0)
+ nb_hairpinq = (queueid_t) n;
+ else
+ rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
+ " >= 0 && <= %u\n", n,
+ get_allowed_max_nb_hairpinq
+ (&pid));
+ if ((n + nb_txq) < 0 ||
+ check_nb_txq((queueid_t)(n + nb_txq)) != 0)
+ rte_exit(EXIT_FAILURE, "txq + hairpinq "
+ "%d invalid - must be"
+ " >= 0 && <= %u\n",
+ n + nb_txq,
+ get_allowed_max_nb_txq(&pid));
+ if ((n + nb_rxq) < 0 ||
+ check_nb_rxq((queueid_t)(n + nb_rxq)) != 0)
+ rte_exit(EXIT_FAILURE, "rxq + hairpinq "
+ "%d invalid - must be"
+ " >= 0 && <= %u\n",
+ n + nb_rxq,
+ get_allowed_max_nb_rxq(&pid));
+ }
if (!nb_rxq && !nb_txq) {
rte_exit(EXIT_FAILURE, "Either rx or tx queues should "
"be non-zero\n");
break;
default:
usage(argv[0]);
+ printf("Invalid option: %s\n", argv[optind]);
rte_exit(EXIT_FAILURE,
"Command line is incomplete or incorrect\n");
break;
}
}
+ if (optind != argc) {
+ usage(argv[0]);
+ printf("Invalid parameter: %s\n", argv[optind]);
+ rte_exit(EXIT_FAILURE, "Command line is incorrect\n");
+ }
+
/* Set offload configuration from command line parameters. */
rx_mode.offloads = rx_offloads;
tx_mode.offloads = tx_offloads;
git.droids-corp.org / dpdk.git / blobdiff