-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2017 Intel Corporation
*/
#include <errno.h>
#include <time.h>
#include <fcntl.h>
#include <sys/types.h>
-#include <errno.h>
#include <sys/queue.h>
#include <sys/stat.h>
#include <stdint.h>
#include <unistd.h>
#include <inttypes.h>
+#include <arpa/inet.h>
#include <rte_common.h>
#include <rte_byteorder.h>
#include <rte_debug.h>
#include <rte_cycles.h>
#include <rte_memory.h>
-#include <rte_memzone.h>
#include <rte_launch.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_string_fns.h>
-#ifdef RTE_LIBRTE_CMDLINE
-#include <cmdline_parse.h>
-#include <cmdline_parse_etheraddr.h>
-#endif
#ifdef RTE_LIBRTE_PMD_BOND
#include <rte_eth_bond.h>
#endif
"[--cmdline-file=FILENAME] "
#endif
"[--help|-h] | [--auto-start|-a] | ["
+ "--tx-first | --stats-period=PERIOD | "
"--coremask=COREMASK --portmask=PORTMASK --numa "
+ "--portlist=PORTLIST "
"--mbuf-size= | --total-num-mbufs= | "
"--nb-cores= | --nb-ports= | "
#ifdef RTE_LIBRTE_CMDLINE
"--eth-peers-configfile= | "
"--eth-peer=X,M:M:M:M:M:M | "
+ "--tx-ip=SRC,DST | --tx-udp=PORT | "
#endif
"--pkt-filter-mode= |"
"--rss-ip | --rss-udp | "
"--rxpt= | --rxht= | --rxwt= | --rxfreet= | "
"--txpt= | --txht= | --txwt= | --txfreet= | "
- "--txrst= | --txqflags= ]\n",
+ "--txrst= | --tx-offloads= | | --rx-offloads= | "
+ "--vxlan-gpe-port= ]\n",
progname);
#ifdef RTE_LIBRTE_CMDLINE
printf(" --interactive: run in interactive mode.\n");
printf(" --auto-start: start forwarding on init "
"[always when non-interactive].\n");
printf(" --help: display this message and quit.\n");
+ printf(" --tx-first: start forwarding sending a burst first "
+ "(only if interactive is disabled).\n");
+ printf(" --stats-period=PERIOD: statistics will be shown "
+ "every PERIOD seconds (only if interactive is disabled).\n");
printf(" --nb-cores=N: set the number of forwarding cores "
"(1 <= N <= %d).\n", nb_lcores);
printf(" --nb-ports=N: set the number of forwarding ports "
"packet forwarding.\n");
printf(" --portmask=PORTMASK: hexadecimal bitmask of ports used "
"by the packet forwarding test.\n");
+ printf(" --portlist=PORTLIST: list of forwarding ports\n");
printf(" --numa: enable NUMA-aware allocation of RX/TX rings and of "
"RX memory buffers (mbufs).\n");
printf(" --port-numa-config=(port,socket)[,(port,socket)]: "
printf(" --total-num-mbufs=N: set the number of mbufs to be allocated "
"in mbuf pools.\n");
printf(" --max-pkt-len=N: set the maximum size of packet to N bytes.\n");
+ printf(" --max-lro-pkt-size=N: set the maximum LRO aggregated packet "
+ "size to N bytes.\n");
#ifdef RTE_LIBRTE_CMDLINE
printf(" --eth-peers-configfile=name: config file with ethernet addresses "
"of peer ports.\n");
printf(" --disable-crc-strip: disable CRC stripping by hardware.\n");
printf(" --enable-lro: enable large receive offload.\n");
printf(" --enable-rx-cksum: enable rx hardware checksum offload.\n");
- printf(" --disable-hw-vlan: disable hardware vlan.\n");
- printf(" --disable-hw-vlan-filter: disable hardware vlan filter.\n");
- printf(" --disable-hw-vlan-strip: disable hardware vlan strip.\n");
- printf(" --disable-hw-vlan-extend: disable hardware vlan extend.\n");
+ printf(" --enable-rx-timestamp: enable rx hardware timestamp offload.\n");
+ printf(" --enable-hw-vlan: enable hardware vlan.\n");
+ printf(" --enable-hw-vlan-filter: enable hardware vlan filter.\n");
+ printf(" --enable-hw-vlan-strip: enable hardware vlan strip.\n");
+ printf(" --enable-hw-vlan-extend: enable hardware vlan extend.\n");
+ printf(" --enable-hw-qinq-strip: enable hardware qinq strip.\n");
printf(" --enable-drop-en: enable per queue packet drop.\n");
printf(" --disable-rss: disable rss.\n");
- printf(" --port-topology=N: set port topology (N: paired (default) or "
- "chained).\n");
+ printf(" --port-topology=<paired|chained|loop>: set port topology (paired "
+ "is default).\n");
printf(" --forward-mode=N: set forwarding mode (N: %s).\n",
list_pkt_forwarding_modes());
printf(" --rss-ip: set RSS functions to IPv4/IPv6 only .\n");
printf(" --rxd=N: set the number of descriptors in RX rings to N.\n");
printf(" --txq=N: set the number of TX queues per port to N.\n");
printf(" --txd=N: set the number of descriptors in TX rings to N.\n");
+ printf(" --hairpinq=N: set the number of hairpin queues per port to "
+ "N.\n");
printf(" --burst=N: set the number of packets per burst to N.\n");
printf(" --mbcache=N: set the cache of mbuf memory pool to N.\n");
printf(" --rxpt=N: set prefetch threshold register of RX rings to N.\n");
"(0 <= N <= value of txd).\n");
printf(" --txrst=N: set the transmit RS bit threshold of TX rings to N "
"(0 <= N <= value of txd).\n");
- printf(" --txqflags=0xXXXXXXXX: hexadecimal bitmask of TX queue flags "
- "(0 <= N <= 0x7FFFFFFF).\n");
printf(" --tx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
"tx queues statistics counters mapping "
"(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
" Used mainly with PCAP drivers.\n");
printf(" --txpkts=X[,Y]*: set TX segment sizes"
" or total packet length.\n");
+ printf(" --txonly-multi-flow: generate multiple flows in txonly mode\n");
printf(" --disable-link-check: disable check on link status when "
"starting/stopping ports.\n");
+ printf(" --disable-device-start: do not automatically start port\n");
printf(" --no-lsc-interrupt: disable link status change interrupt.\n");
printf(" --no-rmv-interrupt: disable device removal interrupt.\n");
printf(" --bitrate-stats=N: set the logical core N to perform "
"bit-rate calculation.\n");
- printf(" --print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv>: "
- "enable print of designated event");
- printf(" --mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv>: "
- "disable print of designated event");
+ printf(" --print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|all>: "
+ "enable print of designated event or all of them.\n");
+ printf(" --mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|all>: "
+ "disable print of designated event or all of them.\n");
+ printf(" --flow-isolate-all: "
+ "requests flow API isolated mode on all ports at initialization time.\n");
+ printf(" --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX queue offloads\n");
+ printf(" --rx-offloads=0xXXXXXXXX: hexadecimal bitmask of RX queue offloads\n");
+ printf(" --hot-plug: enable hot plug for device.\n");
+ printf(" --vxlan-gpe-port=N: UPD port of tunnel VXLAN-GPE\n");
+ printf(" --mlockall: lock all memory\n");
+ printf(" --no-mlockall: do not lock all memory\n");
+ printf(" --mp-alloc <native|anon|xmem|xmemhuge>: mempool allocation method.\n"
+ " native: use regular DPDK memory to create and populate mempool\n"
+ " anon: use regular DPDK memory to create and anonymous memory to populate mempool\n"
+ " xmem: use anonymous memory to create and populate mempool\n"
+ " xmemhuge: use anonymous hugepage memory to create and populate mempool\n");
+ printf(" --noisy-tx-sw-buffer-size=N: size of FIFO buffer\n");
+ printf(" --noisy-tx-sw-buffer-flushtime=N: flush FIFO after N ms\n");
+ printf(" --noisy-lkup-memory=N: allocate N MB of VNF memory\n");
+ printf(" --noisy-lkup-num-writes=N: do N random writes per packet\n");
+ printf(" --noisy-lkup-num-reads=N: do N random reads per packet\n");
+ printf(" --noisy-lkup-num-writes=N: do N random reads and writes per packet\n");
+ printf(" --no-iova-contig: mempool memory can be IOVA non contiguous. "
+ "valid only with --mp-alloc=anon\n");
}
#ifdef RTE_LIBRTE_CMDLINE
if (fgets(buf, sizeof(buf), config_file) == NULL)
break;
- if (cmdline_parse_etheraddr(NULL, buf, &peer_eth_addrs[i],
- sizeof(peer_eth_addrs[i])) < 0) {
+ if (rte_ether_unformat_addr(buf, &peer_eth_addrs[i]) < 0) {
printf("Bad MAC address format on line %d\n", i+1);
fclose(config_file);
return -1;
return 0;
}
+static void
+print_invalid_socket_id_error(void)
+{
+ unsigned int i = 0;
+
+ printf("Invalid socket id, options are: ");
+ for (i = 0; i < num_sockets; i++) {
+ printf("%u%s", socket_ids[i],
+ (i == num_sockets - 1) ? "\n" : ",");
+ }
+}
+
static int
parse_portnuma_config(const char *q_arg)
{
char s[256];
const char *p, *p0 = q_arg;
char *end;
- uint8_t i,port_id,socket_id;
+ uint8_t i, socket_id;
+ portid_t port_id;
unsigned size;
enum fieldnames {
FLD_PORT = 0,
};
unsigned long int_fld[_NUM_FLD];
char *str_fld[_NUM_FLD];
- portid_t pid;
/* reset from value set at definition */
while ((p = strchr(p0,'(')) != NULL) {
if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
return -1;
}
- port_id = (uint8_t)int_fld[FLD_PORT];
- if (port_id_is_invalid(port_id, ENABLED_WARN)) {
- printf("Valid port range is [0");
- RTE_ETH_FOREACH_DEV(pid)
- printf(", %d", pid);
- printf("]\n");
+ port_id = (portid_t)int_fld[FLD_PORT];
+ if (port_id_is_invalid(port_id, ENABLED_WARN) ||
+ port_id == (portid_t)RTE_PORT_ALL) {
+ print_valid_ports();
return -1;
}
socket_id = (uint8_t)int_fld[FLD_SOCKET];
- if(socket_id >= max_socket) {
- printf("Invalid socket id, range is [0, %d]\n",
- max_socket - 1);
- return -1;
+ if (new_socket_id(socket_id)) {
+ if (num_sockets >= RTE_MAX_NUMA_NODES) {
+ print_invalid_socket_id_error();
+ return -1;
+ }
+ socket_ids[num_sockets++] = socket_id;
}
port_numa[port_id] = socket_id;
}
char s[256];
const char *p, *p0 = q_arg;
char *end;
- uint8_t i,port_id,ring_flag,socket_id;
+ uint8_t i, ring_flag, socket_id;
+ portid_t port_id;
unsigned size;
enum fieldnames {
FLD_PORT = 0,
};
unsigned long int_fld[_NUM_FLD];
char *str_fld[_NUM_FLD];
- portid_t pid;
#define RX_RING_ONLY 0x1
#define TX_RING_ONLY 0x2
#define RXTX_RING 0x3
if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
return -1;
}
- port_id = (uint8_t)int_fld[FLD_PORT];
- if (port_id_is_invalid(port_id, ENABLED_WARN)) {
- printf("Valid port range is [0");
- RTE_ETH_FOREACH_DEV(pid)
- printf(", %d", pid);
- printf("]\n");
+ port_id = (portid_t)int_fld[FLD_PORT];
+ if (port_id_is_invalid(port_id, ENABLED_WARN) ||
+ port_id == (portid_t)RTE_PORT_ALL) {
+ print_valid_ports();
return -1;
}
socket_id = (uint8_t)int_fld[FLD_SOCKET];
- if (socket_id >= max_socket) {
- printf("Invalid socket id, range is [0, %d]\n",
- max_socket - 1);
- return -1;
+ if (new_socket_id(socket_id)) {
+ if (num_sockets >= RTE_MAX_NUMA_NODES) {
+ print_invalid_socket_id_error();
+ return -1;
+ }
+ socket_ids[num_sockets++] = socket_id;
}
ring_flag = (uint8_t)int_fld[FLD_FLAG];
if ((ring_flag < RX_RING_ONLY) || (ring_flag > RXTX_RING)) {
mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET;
else if (!strcmp(optarg, "vf_mbox"))
mask = UINT32_C(1) << RTE_ETH_EVENT_VF_MBOX;
+ else if (!strcmp(optarg, "ipsec"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_IPSEC;
else if (!strcmp(optarg, "macsec"))
mask = UINT32_C(1) << RTE_ETH_EVENT_MACSEC;
else if (!strcmp(optarg, "intr_rmv"))
mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV;
+ else if (!strcmp(optarg, "dev_probed"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_NEW;
+ else if (!strcmp(optarg, "dev_released"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_DESTROY;
+ else if (!strcmp(optarg, "all"))
+ mask = ~UINT32_C(0);
else {
fprintf(stderr, "Invalid event: %s\n", optarg);
return -1;
int n, opt;
char **argvopt;
int opt_idx;
+ portid_t pid;
enum { TX, RX };
+ /* Default offloads for all ports. */
+ uint64_t rx_offloads = rx_mode.offloads;
+ uint64_t tx_offloads = tx_mode.offloads;
+ struct rte_eth_dev_info dev_info;
+ uint16_t rec_nb_pkts;
+ int ret;
static struct option lgopts[] = {
{ "help", 0, 0, 0 },
{ "eth-peers-configfile", 1, 0, 0 },
{ "eth-peer", 1, 0, 0 },
#endif
+ { "tx-first", 0, 0, 0 },
+ { "stats-period", 1, 0, 0 },
{ "ports", 1, 0, 0 },
{ "nb-cores", 1, 0, 0 },
{ "nb-ports", 1, 0, 0 },
{ "coremask", 1, 0, 0 },
{ "portmask", 1, 0, 0 },
+ { "portlist", 1, 0, 0 },
{ "numa", 0, 0, 0 },
{ "no-numa", 0, 0, 0 },
{ "mp-anon", 0, 0, 0 },
{ "mbuf-size", 1, 0, 0 },
{ "total-num-mbufs", 1, 0, 0 },
{ "max-pkt-len", 1, 0, 0 },
+ { "max-lro-pkt-size", 1, 0, 0 },
{ "pkt-filter-mode", 1, 0, 0 },
{ "pkt-filter-report-hash", 1, 0, 0 },
{ "pkt-filter-size", 1, 0, 0 },
{ "disable-crc-strip", 0, 0, 0 },
{ "enable-lro", 0, 0, 0 },
{ "enable-rx-cksum", 0, 0, 0 },
+ { "enable-rx-timestamp", 0, 0, 0 },
{ "enable-scatter", 0, 0, 0 },
- { "disable-hw-vlan", 0, 0, 0 },
- { "disable-hw-vlan-filter", 0, 0, 0 },
- { "disable-hw-vlan-strip", 0, 0, 0 },
- { "disable-hw-vlan-extend", 0, 0, 0 },
+ { "enable-hw-vlan", 0, 0, 0 },
+ { "enable-hw-vlan-filter", 0, 0, 0 },
+ { "enable-hw-vlan-strip", 0, 0, 0 },
+ { "enable-hw-vlan-extend", 0, 0, 0 },
+ { "enable-hw-qinq-strip", 0, 0, 0 },
{ "enable-drop-en", 0, 0, 0 },
{ "disable-rss", 0, 0, 0 },
{ "port-topology", 1, 0, 0 },
{ "txq", 1, 0, 0 },
{ "rxd", 1, 0, 0 },
{ "txd", 1, 0, 0 },
+ { "hairpinq", 1, 0, 0 },
{ "burst", 1, 0, 0 },
{ "mbcache", 1, 0, 0 },
{ "txpt", 1, 0, 0 },
{ "txwt", 1, 0, 0 },
{ "txfreet", 1, 0, 0 },
{ "txrst", 1, 0, 0 },
- { "txqflags", 1, 0, 0 },
{ "rxpt", 1, 0, 0 },
{ "rxht", 1, 0, 0 },
{ "rxwt", 1, 0, 0 },
{ "tx-queue-stats-mapping", 1, 0, 0 },
{ "rx-queue-stats-mapping", 1, 0, 0 },
{ "no-flush-rx", 0, 0, 0 },
+ { "flow-isolate-all", 0, 0, 0 },
{ "txpkts", 1, 0, 0 },
+ { "txonly-multi-flow", 0, 0, 0 },
{ "disable-link-check", 0, 0, 0 },
+ { "disable-device-start", 0, 0, 0 },
{ "no-lsc-interrupt", 0, 0, 0 },
{ "no-rmv-interrupt", 0, 0, 0 },
{ "print-event", 1, 0, 0 },
{ "mask-event", 1, 0, 0 },
+ { "tx-offloads", 1, 0, 0 },
+ { "rx-offloads", 1, 0, 0 },
+ { "hot-plug", 0, 0, 0 },
+ { "vxlan-gpe-port", 1, 0, 0 },
+ { "mlockall", 0, 0, 0 },
+ { "no-mlockall", 0, 0, 0 },
+ { "mp-alloc", 1, 0, 0 },
+ { "tx-ip", 1, 0, 0 },
+ { "tx-udp", 1, 0, 0 },
+ { "noisy-tx-sw-buffer-size", 1, 0, 0 },
+ { "noisy-tx-sw-buffer-flushtime", 1, 0, 0 },
+ { "noisy-lkup-memory", 1, 0, 0 },
+ { "noisy-lkup-num-writes", 1, 0, 0 },
+ { "noisy-lkup-num-reads", 1, 0, 0 },
+ { "noisy-lkup-num-reads-writes", 1, 0, 0 },
+ { "no-iova-contig", 0, 0, 0 },
{ 0, 0, 0, 0 },
};
if (!strcmp(lgopts[opt_idx].name, "cmdline-file")) {
printf("CLI commands to be read from %s\n",
optarg);
- snprintf(cmdline_filename,
- sizeof(cmdline_filename), "%s",
- optarg);
+ strlcpy(cmdline_filename, optarg,
+ sizeof(cmdline_filename));
}
if (!strcmp(lgopts[opt_idx].name, "auto-start")) {
printf("Auto-start selected\n");
auto_start = 1;
}
+ if (!strcmp(lgopts[opt_idx].name, "tx-first")) {
+ printf("Ports to start sending a burst of "
+ "packets first\n");
+ tx_first = 1;
+ }
+ if (!strcmp(lgopts[opt_idx].name, "stats-period")) {
+ char *end = NULL;
+ unsigned int n;
+
+ n = strtoul(optarg, &end, 10);
+ if ((optarg[0] == '\0') || (end == NULL) ||
+ (*end != '\0'))
+ break;
+
+ stats_period = n;
+ break;
+ }
if (!strcmp(lgopts[opt_idx].name,
"eth-peers-configfile")) {
if (init_peer_eth_addrs(optarg) != 0)
}
if (!strcmp(lgopts[opt_idx].name, "eth-peer")) {
char *port_end;
- uint8_t c, peer_addr[6];
errno = 0;
n = strtoul(optarg, &port_end, 10);
"eth-peer: port %d >= RTE_MAX_ETHPORTS(%d)\n",
n, RTE_MAX_ETHPORTS);
- if (cmdline_parse_etheraddr(NULL, port_end,
- &peer_addr, sizeof(peer_addr)) < 0)
+ if (rte_ether_unformat_addr(port_end,
+ &peer_eth_addrs[n]) < 0)
rte_exit(EXIT_FAILURE,
"Invalid ethernet address: %s\n",
port_end);
- for (c = 0; c < 6; c++)
- peer_eth_addrs[n].addr_bytes[c] =
- peer_addr[c];
nb_peer_eth_addrs++;
}
#endif
+ if (!strcmp(lgopts[opt_idx].name, "tx-ip")) {
+ struct in_addr in;
+ char *end;
+
+ end = strchr(optarg, ',');
+ if (end == optarg || !end)
+ rte_exit(EXIT_FAILURE,
+ "Invalid tx-ip: %s", optarg);
+
+ *end++ = 0;
+ if (inet_aton(optarg, &in) == 0)
+ rte_exit(EXIT_FAILURE,
+ "Invalid source IP address: %s\n",
+ optarg);
+ tx_ip_src_addr = rte_be_to_cpu_32(in.s_addr);
+
+ if (inet_aton(end, &in) == 0)
+ rte_exit(EXIT_FAILURE,
+ "Invalid destination IP address: %s\n",
+ optarg);
+ tx_ip_dst_addr = rte_be_to_cpu_32(in.s_addr);
+ }
+ if (!strcmp(lgopts[opt_idx].name, "tx-udp")) {
+ char *end = NULL;
+
+ errno = 0;
+ n = strtoul(optarg, &end, 10);
+ if (errno != 0 || end == optarg ||
+ n > UINT16_MAX ||
+ !(*end == '\0' || *end == ','))
+ rte_exit(EXIT_FAILURE,
+ "Invalid UDP port: %s\n",
+ optarg);
+ tx_udp_src_port = n;
+ if (*end == ',') {
+ char *dst = end + 1;
+
+ n = strtoul(dst, &end, 10);
+ if (errno != 0 || end == dst ||
+ n > UINT16_MAX || *end)
+ rte_exit(EXIT_FAILURE,
+ "Invalid destination UDP port: %s\n",
+ dst);
+ tx_udp_dst_port = n;
+ } else {
+ tx_udp_dst_port = n;
+ }
+
+ }
if (!strcmp(lgopts[opt_idx].name, "nb-ports")) {
n = atoi(optarg);
if (n > 0 && n <= nb_ports)
- nb_fwd_ports = (uint8_t) n;
+ nb_fwd_ports = n;
else
rte_exit(EXIT_FAILURE,
"Invalid port %d\n", n);
parse_fwd_coremask(optarg);
if (!strcmp(lgopts[opt_idx].name, "portmask"))
parse_fwd_portmask(optarg);
+ if (!strcmp(lgopts[opt_idx].name, "portlist"))
+ parse_fwd_portlist(optarg);
if (!strcmp(lgopts[opt_idx].name, "no-numa"))
numa_support = 0;
if (!strcmp(lgopts[opt_idx].name, "numa"))
numa_support = 1;
if (!strcmp(lgopts[opt_idx].name, "mp-anon")) {
- mp_anon = 1;
+ mp_alloc_type = MP_ALLOC_ANON;
+ }
+ if (!strcmp(lgopts[opt_idx].name, "mp-alloc")) {
+ if (!strcmp(optarg, "native"))
+ mp_alloc_type = MP_ALLOC_NATIVE;
+ else if (!strcmp(optarg, "anon"))
+ mp_alloc_type = MP_ALLOC_ANON;
+ else if (!strcmp(optarg, "xmem"))
+ mp_alloc_type = MP_ALLOC_XMEM;
+ else if (!strcmp(optarg, "xmemhuge"))
+ mp_alloc_type = MP_ALLOC_XMEM_HUGE;
+ else if (!strcmp(optarg, "xbuf"))
+ mp_alloc_type = MP_ALLOC_XBUF;
+ else
+ rte_exit(EXIT_FAILURE,
+ "mp-alloc %s invalid - must be: "
+ "native, anon, xmem or xmemhuge\n",
+ optarg);
}
if (!strcmp(lgopts[opt_idx].name, "port-numa-config")) {
if (parse_portnuma_config(optarg))
"invalid ring-numa configuration\n");
if (!strcmp(lgopts[opt_idx].name, "socket-num")) {
n = atoi(optarg);
- if((uint8_t)n < max_socket)
+ if (!new_socket_id((uint8_t)n)) {
socket_num = (uint8_t)n;
- else
+ } else {
+ print_invalid_socket_id_error();
rte_exit(EXIT_FAILURE,
- "The socket number should be < %d\n",
- max_socket);
+ "Invalid socket id");
+ }
}
if (!strcmp(lgopts[opt_idx].name, "mbuf-size")) {
n = atoi(optarg);
}
if (!strcmp(lgopts[opt_idx].name, "max-pkt-len")) {
n = atoi(optarg);
- if (n >= ETHER_MIN_LEN) {
+ if (n >= RTE_ETHER_MIN_LEN) {
rx_mode.max_rx_pkt_len = (uint32_t) n;
- if (n > ETHER_MAX_LEN)
- rx_mode.jumbo_frame = 1;
+ if (n > RTE_ETHER_MAX_LEN)
+ rx_offloads |=
+ DEV_RX_OFFLOAD_JUMBO_FRAME;
} else
rte_exit(EXIT_FAILURE,
"Invalid max-pkt-len=%d - should be > %d\n",
- n, ETHER_MIN_LEN);
+ n, RTE_ETHER_MIN_LEN);
+ }
+ if (!strcmp(lgopts[opt_idx].name, "max-lro-pkt-size")) {
+ n = atoi(optarg);
+ rx_mode.max_lro_pkt_size = (uint32_t) n;
}
if (!strcmp(lgopts[opt_idx].name, "pkt-filter-mode")) {
if (!strcmp(optarg, "signature"))
}
#endif
if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip"))
- rx_mode.hw_strip_crc = 0;
+ rx_offloads |= DEV_RX_OFFLOAD_KEEP_CRC;
if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
- rx_mode.enable_lro = 1;
+ rx_offloads |= DEV_RX_OFFLOAD_TCP_LRO;
if (!strcmp(lgopts[opt_idx].name, "enable-scatter"))
- rx_mode.enable_scatter = 1;
+ rx_offloads |= DEV_RX_OFFLOAD_SCATTER;
if (!strcmp(lgopts[opt_idx].name, "enable-rx-cksum"))
- rx_mode.hw_ip_checksum = 1;
+ rx_offloads |= DEV_RX_OFFLOAD_CHECKSUM;
+ if (!strcmp(lgopts[opt_idx].name,
+ "enable-rx-timestamp"))
+ rx_offloads |= DEV_RX_OFFLOAD_TIMESTAMP;
+ if (!strcmp(lgopts[opt_idx].name, "enable-hw-vlan"))
+ rx_offloads |= DEV_RX_OFFLOAD_VLAN;
- if (!strcmp(lgopts[opt_idx].name, "disable-hw-vlan")) {
- rx_mode.hw_vlan_filter = 0;
- rx_mode.hw_vlan_strip = 0;
- rx_mode.hw_vlan_extend = 0;
- }
+ if (!strcmp(lgopts[opt_idx].name,
+ "enable-hw-vlan-filter"))
+ rx_offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
if (!strcmp(lgopts[opt_idx].name,
- "disable-hw-vlan-filter"))
- rx_mode.hw_vlan_filter = 0;
+ "enable-hw-vlan-strip"))
+ rx_offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
if (!strcmp(lgopts[opt_idx].name,
- "disable-hw-vlan-strip"))
- rx_mode.hw_vlan_strip = 0;
+ "enable-hw-vlan-extend"))
+ rx_offloads |= DEV_RX_OFFLOAD_VLAN_EXTEND;
if (!strcmp(lgopts[opt_idx].name,
- "disable-hw-vlan-extend"))
- rx_mode.hw_vlan_extend = 0;
+ "enable-hw-qinq-strip"))
+ rx_offloads |= DEV_RX_OFFLOAD_QINQ_STRIP;
if (!strcmp(lgopts[opt_idx].name, "enable-drop-en"))
rx_drop_en = 1;
port_topology = PORT_TOPOLOGY_LOOP;
else
rte_exit(EXIT_FAILURE, "port-topology %s invalid -"
- " must be: paired or chained \n",
+ " must be: paired, chained or loop\n",
optarg);
}
if (!strcmp(lgopts[opt_idx].name, "forward-mode"))
rss_hf = ETH_RSS_UDP;
if (!strcmp(lgopts[opt_idx].name, "rxq")) {
n = atoi(optarg);
- if (n >= 0 && n <= (int) MAX_QUEUE_ID)
+ if (n >= 0 && check_nb_rxq((queueid_t)n) == 0)
nb_rxq = (queueid_t) n;
else
rte_exit(EXIT_FAILURE, "rxq %d invalid - must be"
- " >= 0 && <= %d\n", n,
- (int) MAX_QUEUE_ID);
+ " >= 0 && <= %u\n", n,
+ get_allowed_max_nb_rxq(&pid));
}
if (!strcmp(lgopts[opt_idx].name, "txq")) {
n = atoi(optarg);
- if (n >= 0 && n <= (int) MAX_QUEUE_ID)
+ if (n >= 0 && check_nb_txq((queueid_t)n) == 0)
nb_txq = (queueid_t) n;
else
rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
- " >= 0 && <= %d\n", n,
- (int) MAX_QUEUE_ID);
+ " >= 0 && <= %u\n", n,
+ get_allowed_max_nb_txq(&pid));
+ }
+ if (!strcmp(lgopts[opt_idx].name, "hairpinq")) {
+ n = atoi(optarg);
+ if (n >= 0 &&
+ check_nb_hairpinq((queueid_t)n) == 0)
+ nb_hairpinq = (queueid_t) n;
+ else
+ rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
+ " >= 0 && <= %u\n", n,
+ get_allowed_max_nb_hairpinq
+ (&pid));
+ if ((n + nb_txq) < 0 ||
+ check_nb_txq((queueid_t)(n + nb_txq)) != 0)
+ rte_exit(EXIT_FAILURE, "txq + hairpinq "
+ "%d invalid - must be"
+ " >= 0 && <= %u\n",
+ n + nb_txq,
+ get_allowed_max_nb_txq(&pid));
+ if ((n + nb_rxq) < 0 ||
+ check_nb_rxq((queueid_t)(n + nb_rxq)) != 0)
+ rte_exit(EXIT_FAILURE, "rxq + hairpinq "
+ "%d invalid - must be"
+ " >= 0 && <= %u\n",
+ n + nb_rxq,
+ get_allowed_max_nb_rxq(&pid));
}
if (!nb_rxq && !nb_txq) {
rte_exit(EXIT_FAILURE, "Either rx or tx queues should "
}
if (!strcmp(lgopts[opt_idx].name, "burst")) {
n = atoi(optarg);
- if ((n >= 1) && (n <= MAX_PKT_BURST))
- nb_pkt_per_burst = (uint16_t) n;
- else
+ if (n == 0) {
+ /* A burst size of zero means that the
+ * PMD should be queried for
+ * recommended Rx burst size. Since
+ * testpmd uses a single size for all
+ * ports, port 0 is queried for the
+ * value, on the assumption that all
+ * ports are of the same NIC model.
+ */
+ ret = eth_dev_info_get_print_err(
+ 0,
+ &dev_info);
+ if (ret != 0)
+ return;
+
+ rec_nb_pkts = dev_info
+ .default_rxportconf.burst_size;
+
+ if (rec_nb_pkts == 0)
+ rte_exit(EXIT_FAILURE,
+ "PMD does not recommend a burst size. "
+ "Provided value must be between "
+ "1 and %d\n", MAX_PKT_BURST);
+ else if (rec_nb_pkts > MAX_PKT_BURST)
+ rte_exit(EXIT_FAILURE,
+ "PMD recommended burst size of %d"
+ " exceeds maximum value of %d\n",
+ rec_nb_pkts, MAX_PKT_BURST);
+ printf("Using PMD-provided burst value of %d\n",
+ rec_nb_pkts);
+ nb_pkt_per_burst = rec_nb_pkts;
+ } else if (n > MAX_PKT_BURST)
rte_exit(EXIT_FAILURE,
- "burst must >= 1 and <= %d]",
- MAX_PKT_BURST);
+ "burst must be between1 and %d\n",
+ MAX_PKT_BURST);
+ else
+ nb_pkt_per_burst = (uint16_t) n;
}
if (!strcmp(lgopts[opt_idx].name, "mbcache")) {
n = atoi(optarg);
else
rte_exit(EXIT_FAILURE, "txrst must be >= 0\n");
}
- if (!strcmp(lgopts[opt_idx].name, "txqflags")) {
- char *end = NULL;
- n = strtoul(optarg, &end, 16);
- if (n >= 0)
- txq_flags = (int32_t)n;
- else
- rte_exit(EXIT_FAILURE,
- "txqflags must be >= 0\n");
- }
if (!strcmp(lgopts[opt_idx].name, "rxd")) {
n = atoi(optarg);
if (n > 0) {
else
rte_exit(EXIT_FAILURE, "bad txpkts\n");
}
+ if (!strcmp(lgopts[opt_idx].name, "txonly-multi-flow"))
+ txonly_multi_flow = 1;
if (!strcmp(lgopts[opt_idx].name, "no-flush-rx"))
no_flush_rx = 1;
if (!strcmp(lgopts[opt_idx].name, "disable-link-check"))
no_link_check = 1;
+ if (!strcmp(lgopts[opt_idx].name, "disable-device-start"))
+ no_device_start = 1;
if (!strcmp(lgopts[opt_idx].name, "no-lsc-interrupt"))
lsc_interrupt = 0;
if (!strcmp(lgopts[opt_idx].name, "no-rmv-interrupt"))
rmv_interrupt = 0;
+ if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
+ flow_isolate_all = 1;
+ if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
+ char *end = NULL;
+ n = strtoull(optarg, &end, 16);
+ if (n >= 0)
+ tx_offloads = (uint64_t)n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "tx-offloads must be >= 0\n");
+ }
+
+ if (!strcmp(lgopts[opt_idx].name, "rx-offloads")) {
+ char *end = NULL;
+ n = strtoull(optarg, &end, 16);
+ if (n >= 0)
+ rx_offloads = (uint64_t)n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "rx-offloads must be >= 0\n");
+ }
+
+ if (!strcmp(lgopts[opt_idx].name, "vxlan-gpe-port")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ vxlan_gpe_udp_port = (uint16_t)n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "vxlan-gpe-port must be >= 0\n");
+ }
if (!strcmp(lgopts[opt_idx].name, "print-event"))
if (parse_event_printing_config(optarg, 1)) {
rte_exit(EXIT_FAILURE,
rte_exit(EXIT_FAILURE,
"invalid mask-event argument\n");
}
-
+ if (!strcmp(lgopts[opt_idx].name, "hot-plug"))
+ hot_plug = 1;
+ if (!strcmp(lgopts[opt_idx].name, "mlockall"))
+ do_mlockall = 1;
+ if (!strcmp(lgopts[opt_idx].name, "no-mlockall"))
+ do_mlockall = 0;
+ if (!strcmp(lgopts[opt_idx].name,
+ "noisy-tx-sw-buffer-size")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ noisy_tx_sw_bufsz = n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "noisy-tx-sw-buffer-size must be >= 0\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name,
+ "noisy-tx-sw-buffer-flushtime")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ noisy_tx_sw_buf_flush_time = n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "noisy-tx-sw-buffer-flushtime must be >= 0\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name,
+ "noisy-lkup-memory")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ noisy_lkup_mem_sz = n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "noisy-lkup-memory must be >= 0\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name,
+ "noisy-lkup-num-writes")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ noisy_lkup_num_writes = n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "noisy-lkup-num-writes must be >= 0\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name,
+ "noisy-lkup-num-reads")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ noisy_lkup_num_reads = n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "noisy-lkup-num-reads must be >= 0\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name,
+ "noisy-lkup-num-reads-writes")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ noisy_lkup_num_reads_writes = n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "noisy-lkup-num-reads-writes must be >= 0\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name, "no-iova-contig"))
+ mempool_flags = MEMPOOL_F_NO_IOVA_CONTIG;
break;
case 'h':
usage(argv[0]);
break;
default:
usage(argv[0]);
+ printf("Invalid option: %s\n", argv[optind]);
rte_exit(EXIT_FAILURE,
"Command line is incomplete or incorrect\n");
break;
}
}
+
+ if (optind != argc) {
+ usage(argv[0]);
+ printf("Invalid parameter: %s\n", argv[optind]);
+ rte_exit(EXIT_FAILURE, "Command line is incorrect\n");
+ }
+
+ /* Set offload configuration from command line parameters. */
+ rx_mode.offloads = rx_offloads;
+ tx_mode.offloads = tx_offloads;
+
+ if (mempool_flags & MEMPOOL_F_NO_IOVA_CONTIG &&
+ mp_alloc_type != MP_ALLOC_ANON) {
+ TESTPMD_LOG(WARNING, "cannot use no-iova-contig without "
+ "mp-alloc=anon. mempool no-iova-contig is "
+ "ignored\n");
+ mempool_flags = 0;
+ }
}