#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_string_fns.h>
-#ifdef RTE_LIBRTE_PMD_BOND
+#ifdef RTE_NET_BOND
#include <rte_eth_bond.h>
#endif
#include <rte_flow.h>
static void
usage(char* progname)
{
- printf("usage: %s "
-#ifdef RTE_LIBRTE_CMDLINE
+ printf("usage: %s [EAL options] -- "
+#ifdef RTE_LIB_CMDLINE
"[--interactive|-i] "
"[--cmdline-file=FILENAME] "
#endif
"[--help|-h] | [--auto-start|-a] | ["
"--tx-first | --stats-period=PERIOD | "
"--coremask=COREMASK --portmask=PORTMASK --numa "
+ "--portlist=PORTLIST "
"--mbuf-size= | --total-num-mbufs= | "
"--nb-cores= | --nb-ports= | "
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
"--eth-peers-configfile= | "
"--eth-peer=X,M:M:M:M:M:M | "
"--tx-ip=SRC,DST | --tx-udp=PORT | "
#endif
"--pkt-filter-mode= |"
- "--rss-ip | --rss-udp | "
- "--rxpt= | --rxht= | --rxwt= | --rxfreet= | "
- "--txpt= | --txht= | --txwt= | --txfreet= | "
+ "--rss-ip | --rss-udp | --rss-level-inner | --rss-level-outer |"
+ "--rxpt= | --rxht= | --rxwt= |"
+ " --rxfreet= | --txpt= | --txht= | --txwt= | --txfreet= | "
"--txrst= | --tx-offloads= | | --rx-offloads= | "
- "--vxlan-gpe-port= ]\n",
+ "--vxlan-gpe-port= | --geneve-parsed-port= | "
+ "--record-core-cycles | --record-burst-stats]\n",
progname);
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
printf(" --interactive: run in interactive mode.\n");
printf(" --cmdline-file: execute cli commands before startup.\n");
#endif
printf(" --nb-ports=N: set the number of forwarding ports "
"(1 <= N <= %d).\n", nb_ports);
printf(" --coremask=COREMASK: hexadecimal bitmask of cores running "
- "the packet forwarding test. The master lcore is reserved for "
+ "the packet forwarding test. The main lcore is reserved for "
"command line parsing only, and cannot be masked on for "
"packet forwarding.\n");
printf(" --portmask=PORTMASK: hexadecimal bitmask of ports used "
"by the packet forwarding test.\n");
+ printf(" --portlist=PORTLIST: list of forwarding ports\n");
printf(" --numa: enable NUMA-aware allocation of RX/TX rings and of "
"RX memory buffers (mbufs).\n");
printf(" --port-numa-config=(port,socket)[,(port,socket)]: "
"(flag: 1 for RX; 2 for TX; 3 for RX and TX).\n");
printf(" --socket-num=N: set socket from which all memory is allocated "
"in NUMA mode.\n");
- printf(" --mbuf-size=N: set the data size of mbuf to N bytes.\n");
+ printf(" --mbuf-size=N,[N1[,..Nn]: set the data size of mbuf to "
+ "N bytes. If multiple numbers are specified the extra pools "
+ "will be created to receive with packet split features\n");
printf(" --total-num-mbufs=N: set the number of mbufs to be allocated "
"in mbuf pools.\n");
printf(" --max-pkt-len=N: set the maximum size of packet to N bytes.\n");
printf(" --max-lro-pkt-size=N: set the maximum LRO aggregated packet "
"size to N bytes.\n");
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
printf(" --eth-peers-configfile=name: config file with ethernet addresses "
"of peer ports.\n");
printf(" --eth-peer=X,M:M:M:M:M:M: set the MAC address of the X peer "
"the packet will be enqueued into the rx drop-queue. "
"If the drop-queue doesn't exist, the packet is dropped. "
"By default drop-queue=127.\n");
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
printf(" --latencystats=N: enable latency and jitter statistcs "
"monitoring on forwarding lcore id N.\n");
#endif
"is default).\n");
printf(" --forward-mode=N: set forwarding mode (N: %s).\n",
list_pkt_forwarding_modes());
+ printf(" --forward-mode=5tswap: set forwarding mode to "
+ "swap L2,L3,L4 for MAC, IPv4/IPv6 and TCP/UDP only.\n");
printf(" --rss-ip: set RSS functions to IPv4/IPv6 only .\n");
printf(" --rss-udp: set RSS functions to IPv4/IPv6 + UDP.\n");
+ printf(" --rss-level-inner: set RSS hash level to innermost\n");
+ printf(" --rss-level-outer: set RSS hash level to outermost\n");
printf(" --rxq=N: set the number of RX queues per port to N.\n");
printf(" --rxd=N: set the number of descriptors in RX rings to N.\n");
printf(" --txq=N: set the number of TX queues per port to N.\n");
printf(" --hairpinq=N: set the number of hairpin queues per port to "
"N.\n");
printf(" --burst=N: set the number of packets per burst to N.\n");
+ printf(" --flowgen-clones=N: set the number of single packet clones to send in flowgen mode. Should be less than burst value.\n");
printf(" --mbcache=N: set the cache of mbuf memory pool to N.\n");
printf(" --rxpt=N: set prefetch threshold register of RX rings to N.\n");
printf(" --rxht=N: set the host threshold register of RX rings to N.\n");
"(0 <= N <= value of txd).\n");
printf(" --txrst=N: set the transmit RS bit threshold of TX rings to N "
"(0 <= N <= value of txd).\n");
- printf(" --tx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
- "tx queues statistics counters mapping "
- "(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
- printf(" --rx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
- "rx queues statistics counters mapping "
- "(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
printf(" --no-flush-rx: Don't flush RX streams before forwarding."
" Used mainly with PCAP drivers.\n");
+ printf(" --rxoffs=X[,Y]*: set RX segment offsets for split.\n");
+ printf(" --rxpkts=X[,Y]*: set RX segment sizes to split.\n");
printf(" --txpkts=X[,Y]*: set TX segment sizes"
" or total packet length.\n");
printf(" --txonly-multi-flow: generate multiple flows in txonly mode\n");
+ printf(" --eth-link-speed: force link speed.\n");
printf(" --disable-link-check: disable check on link status when "
"starting/stopping ports.\n");
printf(" --disable-device-start: do not automatically start port\n");
printf(" --no-rmv-interrupt: disable device removal interrupt.\n");
printf(" --bitrate-stats=N: set the logical core N to perform "
"bit-rate calculation.\n");
- printf(" --print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|all>: "
+ printf(" --print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|flow_aged|all>: "
"enable print of designated event or all of them.\n");
- printf(" --mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|all>: "
+ printf(" --mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|flow_aged|all>: "
"disable print of designated event or all of them.\n");
printf(" --flow-isolate-all: "
"requests flow API isolated mode on all ports at initialization time.\n");
printf(" --rx-offloads=0xXXXXXXXX: hexadecimal bitmask of RX queue offloads\n");
printf(" --hot-plug: enable hot plug for device.\n");
printf(" --vxlan-gpe-port=N: UPD port of tunnel VXLAN-GPE\n");
+ printf(" --geneve-parsed-port=N: UPD port to parse GENEVE tunnel protocol\n");
printf(" --mlockall: lock all memory\n");
printf(" --no-mlockall: do not lock all memory\n");
printf(" --mp-alloc <native|anon|xmem|xmemhuge>: mempool allocation method.\n"
printf(" --noisy-lkup-num-writes=N: do N random reads and writes per packet\n");
printf(" --no-iova-contig: mempool memory can be IOVA non contiguous. "
"valid only with --mp-alloc=anon\n");
+ printf(" --rx-mq-mode=0xX: hexadecimal bitmask of RX mq mode can be "
+ "enabled\n");
+ printf(" --record-core-cycles: enable measurement of CPU cycles.\n");
+ printf(" --record-burst-stats: enable display of RX and TX bursts.\n");
+ printf(" --hairpin-mode=0xXX: bitmask set the hairpin port mode.\n "
+ " 0x10 - explicit Tx rule, 0x02 - hairpin ports paired\n"
+ " 0x01 - hairpin ports loop, 0x00 - hairpin port self\n");
}
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
static int
init_peer_eth_addrs(char *config_filename)
{
set_fwd_ports_mask((uint64_t) pm);
}
-
-static int
-parse_queue_stats_mapping_config(const char *q_arg, int is_rx)
-{
- char s[256];
- const char *p, *p0 = q_arg;
- char *end;
- enum fieldnames {
- FLD_PORT = 0,
- FLD_QUEUE,
- FLD_STATS_COUNTER,
- _NUM_FLD
- };
- unsigned long int_fld[_NUM_FLD];
- char *str_fld[_NUM_FLD];
- int i;
- unsigned size;
-
- /* reset from value set at definition */
- is_rx ? (nb_rx_queue_stats_mappings = 0) : (nb_tx_queue_stats_mappings = 0);
-
- while ((p = strchr(p0,'(')) != NULL) {
- ++p;
- if((p0 = strchr(p,')')) == NULL)
- return -1;
-
- size = p0 - p;
- if(size >= sizeof(s))
- return -1;
-
- snprintf(s, sizeof(s), "%.*s", size, p);
- if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
- return -1;
- for (i = 0; i < _NUM_FLD; i++){
- errno = 0;
- int_fld[i] = strtoul(str_fld[i], &end, 0);
- if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
- return -1;
- }
- /* Check mapping field is in correct range (0..RTE_ETHDEV_QUEUE_STAT_CNTRS-1) */
- if (int_fld[FLD_STATS_COUNTER] >= RTE_ETHDEV_QUEUE_STAT_CNTRS) {
- printf("Stats counter not in the correct range 0..%d\n",
- RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
- return -1;
- }
-
- if (!is_rx) {
- if ((nb_tx_queue_stats_mappings >=
- MAX_TX_QUEUE_STATS_MAPPINGS)) {
- printf("exceeded max number of TX queue "
- "statistics mappings: %hu\n",
- nb_tx_queue_stats_mappings);
- return -1;
- }
- tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].port_id =
- (uint8_t)int_fld[FLD_PORT];
- tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].queue_id =
- (uint8_t)int_fld[FLD_QUEUE];
- tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].stats_counter_id =
- (uint8_t)int_fld[FLD_STATS_COUNTER];
- ++nb_tx_queue_stats_mappings;
- }
- else {
- if ((nb_rx_queue_stats_mappings >=
- MAX_RX_QUEUE_STATS_MAPPINGS)) {
- printf("exceeded max number of RX queue "
- "statistics mappings: %hu\n",
- nb_rx_queue_stats_mappings);
- return -1;
- }
- rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].port_id =
- (uint8_t)int_fld[FLD_PORT];
- rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].queue_id =
- (uint8_t)int_fld[FLD_QUEUE];
- rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].stats_counter_id =
- (uint8_t)int_fld[FLD_STATS_COUNTER];
- ++nb_rx_queue_stats_mappings;
- }
-
- }
-/* Reassign the rx/tx_queue_stats_mappings pointer to point to this newly populated array rather */
-/* than to the default array (that was set at its definition) */
- is_rx ? (rx_queue_stats_mappings = rx_queue_stats_mappings_array) :
- (tx_queue_stats_mappings = tx_queue_stats_mappings_array);
- return 0;
-}
-
static void
print_invalid_socket_id_error(void)
{
mask = UINT32_C(1) << RTE_ETH_EVENT_NEW;
else if (!strcmp(optarg, "dev_released"))
mask = UINT32_C(1) << RTE_ETH_EVENT_DESTROY;
+ else if (!strcmp(optarg, "flow_aged"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_FLOW_AGED;
else if (!strcmp(optarg, "all"))
mask = ~UINT32_C(0);
else {
return 0;
}
+static int
+parse_link_speed(int n)
+{
+ uint32_t speed = ETH_LINK_SPEED_FIXED;
+
+ switch (n) {
+ case 1000:
+ speed |= ETH_LINK_SPEED_1G;
+ break;
+ case 10000:
+ speed |= ETH_LINK_SPEED_10G;
+ break;
+ case 25000:
+ speed |= ETH_LINK_SPEED_25G;
+ break;
+ case 40000:
+ speed |= ETH_LINK_SPEED_40G;
+ break;
+ case 50000:
+ speed |= ETH_LINK_SPEED_50G;
+ break;
+ case 100000:
+ speed |= ETH_LINK_SPEED_100G;
+ break;
+ case 200000:
+ speed |= ETH_LINK_SPEED_200G;
+ break;
+ case 100:
+ case 10:
+ default:
+ printf("Unsupported fixed speed\n");
+ return 0;
+ }
+
+ return speed;
+}
+
void
launch_args_parse(int argc, char** argv)
{
static struct option lgopts[] = {
{ "help", 0, 0, 0 },
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
{ "interactive", 0, 0, 0 },
{ "cmdline-file", 1, 0, 0 },
{ "auto-start", 0, 0, 0 },
{ "nb-ports", 1, 0, 0 },
{ "coremask", 1, 0, 0 },
{ "portmask", 1, 0, 0 },
+ { "portlist", 1, 0, 0 },
{ "numa", 0, 0, 0 },
{ "no-numa", 0, 0, 0 },
{ "mp-anon", 0, 0, 0 },
{ "pkt-filter-report-hash", 1, 0, 0 },
{ "pkt-filter-size", 1, 0, 0 },
{ "pkt-filter-drop-queue", 1, 0, 0 },
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
{ "latencystats", 1, 0, 0 },
#endif
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIB_BITRATESTATS
{ "bitrate-stats", 1, 0, 0 },
#endif
{ "disable-crc-strip", 0, 0, 0 },
{ "forward-mode", 1, 0, 0 },
{ "rss-ip", 0, 0, 0 },
{ "rss-udp", 0, 0, 0 },
+ { "rss-level-outer", 0, 0, 0 },
+ { "rss-level-inner", 0, 0, 0 },
{ "rxq", 1, 0, 0 },
{ "txq", 1, 0, 0 },
{ "rxd", 1, 0, 0 },
{ "txd", 1, 0, 0 },
{ "hairpinq", 1, 0, 0 },
+ { "hairpin-mode", 1, 0, 0 },
{ "burst", 1, 0, 0 },
+ { "flowgen-clones", 1, 0, 0 },
{ "mbcache", 1, 0, 0 },
{ "txpt", 1, 0, 0 },
{ "txht", 1, 0, 0 },
{ "rxht", 1, 0, 0 },
{ "rxwt", 1, 0, 0 },
{ "rxfreet", 1, 0, 0 },
- { "tx-queue-stats-mapping", 1, 0, 0 },
- { "rx-queue-stats-mapping", 1, 0, 0 },
{ "no-flush-rx", 0, 0, 0 },
{ "flow-isolate-all", 0, 0, 0 },
+ { "rxoffs", 1, 0, 0 },
+ { "rxpkts", 1, 0, 0 },
{ "txpkts", 1, 0, 0 },
{ "txonly-multi-flow", 0, 0, 0 },
+ { "eth-link-speed", 1, 0, 0 },
{ "disable-link-check", 0, 0, 0 },
{ "disable-device-start", 0, 0, 0 },
{ "no-lsc-interrupt", 0, 0, 0 },
{ "rx-offloads", 1, 0, 0 },
{ "hot-plug", 0, 0, 0 },
{ "vxlan-gpe-port", 1, 0, 0 },
+ { "geneve-parsed-port", 1, 0, 0 },
{ "mlockall", 0, 0, 0 },
{ "no-mlockall", 0, 0, 0 },
{ "mp-alloc", 1, 0, 0 },
{ "noisy-lkup-num-reads", 1, 0, 0 },
{ "noisy-lkup-num-reads-writes", 1, 0, 0 },
{ "no-iova-contig", 0, 0, 0 },
+ { "rx-mq-mode", 1, 0, 0 },
+ { "record-core-cycles", 0, 0, 0 },
+ { "record-burst-stats", 0, 0, 0 },
{ 0, 0, 0, 0 },
};
argvopt = argv;
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
#define SHORTOPTS "i"
#else
#define SHORTOPTS ""
while ((opt = getopt_long(argc, argvopt, SHORTOPTS "ah",
lgopts, &opt_idx)) != EOF) {
switch (opt) {
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
case 'i':
printf("Interactive-mode selected\n");
interactive = 1;
usage(argv[0]);
rte_exit(EXIT_SUCCESS, "Displayed help\n");
}
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
if (!strcmp(lgopts[opt_idx].name, "interactive")) {
printf("Interactive-mode selected\n");
interactive = 1;
parse_fwd_coremask(optarg);
if (!strcmp(lgopts[opt_idx].name, "portmask"))
parse_fwd_portmask(optarg);
+ if (!strcmp(lgopts[opt_idx].name, "portlist"))
+ parse_fwd_portlist(optarg);
if (!strcmp(lgopts[opt_idx].name, "no-numa"))
numa_support = 0;
if (!strcmp(lgopts[opt_idx].name, "numa"))
mp_alloc_type = MP_ALLOC_XMEM;
else if (!strcmp(optarg, "xmemhuge"))
mp_alloc_type = MP_ALLOC_XMEM_HUGE;
+ else if (!strcmp(optarg, "xbuf"))
+ mp_alloc_type = MP_ALLOC_XBUF;
else
rte_exit(EXIT_FAILURE,
"mp-alloc %s invalid - must be: "
}
}
if (!strcmp(lgopts[opt_idx].name, "mbuf-size")) {
- n = atoi(optarg);
- if (n > 0 && n <= 0xFFFF)
- mbuf_data_size = (uint16_t) n;
- else
+ unsigned int mb_sz[MAX_SEGS_BUFFER_SPLIT];
+ unsigned int nb_segs, i;
+
+ nb_segs = parse_item_list(optarg, "mbuf-size",
+ MAX_SEGS_BUFFER_SPLIT, mb_sz, 0);
+ if (nb_segs <= 0)
rte_exit(EXIT_FAILURE,
- "mbuf-size should be > 0 and < 65536\n");
+ "bad mbuf-size\n");
+ for (i = 0; i < nb_segs; i++) {
+ if (mb_sz[i] <= 0 || mb_sz[i] > 0xFFFF)
+ rte_exit(EXIT_FAILURE,
+ "mbuf-size should be "
+ "> 0 and < 65536\n");
+ mbuf_data_size[i] = (uint16_t) mb_sz[i];
+ }
+ mbuf_data_size_n = nb_segs;
}
if (!strcmp(lgopts[opt_idx].name, "total-num-mbufs")) {
n = atoi(optarg);
}
if (!strcmp(lgopts[opt_idx].name, "max-pkt-len")) {
n = atoi(optarg);
- if (n >= RTE_ETHER_MIN_LEN) {
+ if (n >= RTE_ETHER_MIN_LEN)
rx_mode.max_rx_pkt_len = (uint32_t) n;
- if (n > RTE_ETHER_MAX_LEN)
- rx_offloads |=
- DEV_RX_OFFLOAD_JUMBO_FRAME;
- } else
+ else
rte_exit(EXIT_FAILURE,
"Invalid max-pkt-len=%d - should be > %d\n",
n, RTE_ETHER_MIN_LEN);
"drop queue %d invalid - must"
"be >= 0 \n", n);
}
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
if (!strcmp(lgopts[opt_idx].name,
"latencystats")) {
n = atoi(optarg);
" must be >= 0\n", n);
}
#endif
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIB_BITRATESTATS
if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) {
n = atoi(optarg);
if (n >= 0) {
rss_hf = ETH_RSS_IP;
if (!strcmp(lgopts[opt_idx].name, "rss-udp"))
rss_hf = ETH_RSS_UDP;
+ if (!strcmp(lgopts[opt_idx].name, "rss-level-inner"))
+ rss_hf |= ETH_RSS_LEVEL_INNERMOST;
+ if (!strcmp(lgopts[opt_idx].name, "rss-level-outer"))
+ rss_hf |= ETH_RSS_LEVEL_OUTERMOST;
if (!strcmp(lgopts[opt_idx].name, "rxq")) {
n = atoi(optarg);
if (n >= 0 && check_nb_rxq((queueid_t)n) == 0)
rte_exit(EXIT_FAILURE, "Either rx or tx queues should "
"be non-zero\n");
}
+ if (!strcmp(lgopts[opt_idx].name, "hairpin-mode")) {
+ char *end = NULL;
+ unsigned int n;
+
+ errno = 0;
+ n = strtoul(optarg, &end, 0);
+ if (errno != 0 || end == optarg)
+ rte_exit(EXIT_FAILURE, "hairpin mode invalid\n");
+ else
+ hairpin_mode = (uint16_t)n;
+ }
if (!strcmp(lgopts[opt_idx].name, "burst")) {
n = atoi(optarg);
if (n == 0) {
else
nb_pkt_per_burst = (uint16_t) n;
}
+ if (!strcmp(lgopts[opt_idx].name, "flowgen-clones")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ nb_pkt_flowgen_clones = (uint16_t) n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "clones must be >= 0 and <= current burst\n");
+ }
if (!strcmp(lgopts[opt_idx].name, "mbcache")) {
n = atoi(optarg);
if ((n >= 0) &&
else
rte_exit(EXIT_FAILURE, "rxfreet must be >= 0\n");
}
- if (!strcmp(lgopts[opt_idx].name, "tx-queue-stats-mapping")) {
- if (parse_queue_stats_mapping_config(optarg, TX)) {
- rte_exit(EXIT_FAILURE,
- "invalid TX queue statistics mapping config entered\n");
- }
+ if (!strcmp(lgopts[opt_idx].name, "rxoffs")) {
+ unsigned int seg_off[MAX_SEGS_BUFFER_SPLIT];
+ unsigned int nb_offs;
+
+ nb_offs = parse_item_list
+ (optarg, "rxpkt offsets",
+ MAX_SEGS_BUFFER_SPLIT,
+ seg_off, 0);
+ if (nb_offs > 0)
+ set_rx_pkt_offsets(seg_off, nb_offs);
+ else
+ rte_exit(EXIT_FAILURE, "bad rxoffs\n");
}
- if (!strcmp(lgopts[opt_idx].name, "rx-queue-stats-mapping")) {
- if (parse_queue_stats_mapping_config(optarg, RX)) {
- rte_exit(EXIT_FAILURE,
- "invalid RX queue statistics mapping config entered\n");
- }
+ if (!strcmp(lgopts[opt_idx].name, "rxpkts")) {
+ unsigned int seg_len[MAX_SEGS_BUFFER_SPLIT];
+ unsigned int nb_segs;
+
+ nb_segs = parse_item_list
+ (optarg, "rxpkt segments",
+ MAX_SEGS_BUFFER_SPLIT,
+ seg_len, 0);
+ if (nb_segs > 0)
+ set_rx_pkt_segments(seg_len, nb_segs);
+ else
+ rte_exit(EXIT_FAILURE, "bad rxpkts\n");
}
if (!strcmp(lgopts[opt_idx].name, "txpkts")) {
unsigned seg_lengths[RTE_MAX_SEGS_PER_PKT];
txonly_multi_flow = 1;
if (!strcmp(lgopts[opt_idx].name, "no-flush-rx"))
no_flush_rx = 1;
+ if (!strcmp(lgopts[opt_idx].name, "eth-link-speed")) {
+ n = atoi(optarg);
+ if (n >= 0 && parse_link_speed(n) > 0)
+ eth_link_speed = parse_link_speed(n);
+ }
if (!strcmp(lgopts[opt_idx].name, "disable-link-check"))
no_link_check = 1;
if (!strcmp(lgopts[opt_idx].name, "disable-device-start"))
rte_exit(EXIT_FAILURE,
"vxlan-gpe-port must be >= 0\n");
}
+ if (!strcmp(lgopts[opt_idx].name,
+ "geneve-parsed-port")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ geneve_udp_port = (uint16_t)n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "geneve-parsed-port must be >= 0\n");
+ }
if (!strcmp(lgopts[opt_idx].name, "print-event"))
if (parse_event_printing_config(optarg, 1)) {
rte_exit(EXIT_FAILURE,
}
if (!strcmp(lgopts[opt_idx].name, "no-iova-contig"))
mempool_flags = MEMPOOL_F_NO_IOVA_CONTIG;
+
+ if (!strcmp(lgopts[opt_idx].name, "rx-mq-mode")) {
+ char *end = NULL;
+ n = strtoul(optarg, &end, 16);
+ if (n >= 0 && n <= ETH_MQ_RX_VMDQ_DCB_RSS)
+ rx_mq_mode = (enum rte_eth_rx_mq_mode)n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "rx-mq-mode must be >= 0 and <= %d\n",
+ ETH_MQ_RX_VMDQ_DCB_RSS);
+ }
+ if (!strcmp(lgopts[opt_idx].name, "record-core-cycles"))
+ record_core_cycles = 1;
+ if (!strcmp(lgopts[opt_idx].name, "record-burst-stats"))
+ record_burst_stats = 1;
break;
case 'h':
usage(argv[0]);
break;
default:
usage(argv[0]);
+ printf("Invalid option: %s\n", argv[optind]);
rte_exit(EXIT_FAILURE,
"Command line is incomplete or incorrect\n");
break;
}
}
+ if (optind != argc) {
+ usage(argv[0]);
+ printf("Invalid parameter: %s\n", argv[optind]);
+ rte_exit(EXIT_FAILURE, "Command line is incorrect\n");
+ }
+
/* Set offload configuration from command line parameters. */
rx_mode.offloads = rx_offloads;
tx_mode.offloads = tx_offloads;