-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2017 Intel Corporation
*/
#include <errno.h>
#include <time.h>
#include <fcntl.h>
#include <sys/types.h>
-#include <errno.h>
#include <sys/queue.h>
#include <sys/stat.h>
#include <rte_debug.h>
#include <rte_cycles.h>
#include <rte_memory.h>
-#include <rte_memzone.h>
#include <rte_launch.h>
-#include <rte_tailq.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_lcore.h>
-#include <rte_atomic.h>
#include <rte_branch_prediction.h>
-#include <rte_ring.h>
#include <rte_mempool.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_string_fns.h>
-#ifdef RTE_LIBRTE_CMDLINE
-#include <cmdline_parse.h>
-#include <cmdline_parse_etheraddr.h>
-#endif
-#ifdef RTE_LIBRTE_PMD_BOND
-#include <rte_eth_bond.h>
-#endif
+#include <rte_flow.h>
#include "testpmd.h"
static void
usage(char* progname)
{
- printf("usage: %s "
-#ifdef RTE_LIBRTE_CMDLINE
- "[--interactive|-i] "
-#endif
- "[--help|-h] | [--auto-start|-a] | ["
- "--coremask=COREMASK --portmask=PORTMASK --numa "
- "--mbuf-size= | --total-num-mbufs= | "
- "--nb-cores= | --nb-ports= | "
-#ifdef RTE_LIBRTE_CMDLINE
- "--eth-peers-configfile= | "
- "--eth-peer=X,M:M:M:M:M:M | "
-#endif
- "--pkt-filter-mode= |"
- "--rss-ip | --rss-udp | "
- "--rxpt= | --rxht= | --rxwt= | --rxfreet= | "
- "--txpt= | --txht= | --txwt= | --txfreet= | "
- "--txrst= | --txqflags= ]\n",
+ printf("\nUsage: %s [EAL options] -- [testpmd options]\n\n",
progname);
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
printf(" --interactive: run in interactive mode.\n");
+ printf(" --cmdline-file: execute cli commands before startup.\n");
#endif
printf(" --auto-start: start forwarding on init "
"[always when non-interactive].\n");
printf(" --help: display this message and quit.\n");
+ printf(" --tx-first: start forwarding sending a burst first "
+ "(only if interactive is disabled).\n");
+ printf(" --stats-period=PERIOD: statistics will be shown "
+ "every PERIOD seconds (only if interactive is disabled).\n");
+ printf(" --display-xstats xstat_name1[,...]: comma-separated list of "
+ "extended statistics to show. Used with --stats-period "
+ "specified or interactive commands that show Rx/Tx statistics "
+ "(i.e. 'show port stats').\n");
printf(" --nb-cores=N: set the number of forwarding cores "
"(1 <= N <= %d).\n", nb_lcores);
printf(" --nb-ports=N: set the number of forwarding ports "
"(1 <= N <= %d).\n", nb_ports);
printf(" --coremask=COREMASK: hexadecimal bitmask of cores running "
- "the packet forwarding test. The master lcore is reserved for "
+ "the packet forwarding test. The main lcore is reserved for "
"command line parsing only, and cannot be masked on for "
"packet forwarding.\n");
printf(" --portmask=PORTMASK: hexadecimal bitmask of ports used "
"by the packet forwarding test.\n");
+ printf(" --portlist=PORTLIST: list of forwarding ports\n");
printf(" --numa: enable NUMA-aware allocation of RX/TX rings and of "
"RX memory buffers (mbufs).\n");
+ printf(" --no-numa: disable NUMA-aware allocation.\n");
printf(" --port-numa-config=(port,socket)[,(port,socket)]: "
"specify the socket on which the memory pool "
"used by the port will be allocated.\n");
"(flag: 1 for RX; 2 for TX; 3 for RX and TX).\n");
printf(" --socket-num=N: set socket from which all memory is allocated "
"in NUMA mode.\n");
- printf(" --mbuf-size=N: set the data size of mbuf to N bytes.\n");
+ printf(" --mbuf-size=N,[N1[,..Nn]: set the data size of mbuf to "
+ "N bytes. If multiple numbers are specified the extra pools "
+ "will be created to receive with packet split features\n");
printf(" --total-num-mbufs=N: set the number of mbufs to be allocated "
"in mbuf pools.\n");
printf(" --max-pkt-len=N: set the maximum size of packet to N bytes.\n");
-#ifdef RTE_LIBRTE_CMDLINE
+ printf(" --max-lro-pkt-size=N: set the maximum LRO aggregated packet "
+ "size to N bytes.\n");
+#ifdef RTE_LIB_CMDLINE
printf(" --eth-peers-configfile=name: config file with ethernet addresses "
"of peer ports.\n");
printf(" --eth-peer=X,M:M:M:M:M:M: set the MAC address of the X peer "
"(N: none or match (default) or always).\n");
printf(" --pkt-filter-size=N: set Flow Director mode "
"(N: 64K (default mode) or 128K or 256K).\n");
- printf(" --pkt-filter-flexbytes-offset=N: set flexbytes-offset. "
- "The offset is defined in word units counted from the "
- "first byte of the destination Ethernet MAC address. "
- "0 <= N <= 32.\n");
printf(" --pkt-filter-drop-queue=N: set drop-queue. "
"In perfect mode, when you add a rule with queue = -1 "
"the packet will be enqueued into the rx drop-queue. "
"If the drop-queue doesn't exist, the packet is dropped. "
"By default drop-queue=127.\n");
- printf(" --crc-strip: enable CRC stripping by hardware.\n");
+#ifdef RTE_LIB_LATENCYSTATS
+ printf(" --latencystats=N: enable latency and jitter statistics "
+ "monitoring on forwarding lcore id N.\n");
+#endif
+ printf(" --disable-crc-strip: disable CRC stripping by hardware.\n");
+ printf(" --enable-scatter: enable scattered Rx.\n");
+ printf(" --enable-lro: enable large receive offload.\n");
printf(" --enable-rx-cksum: enable rx hardware checksum offload.\n");
- printf(" --disable-hw-vlan: disable hardware vlan.\n");
+ printf(" --enable-rx-timestamp: enable rx hardware timestamp offload.\n");
+ printf(" --enable-hw-vlan: enable hardware vlan.\n");
+ printf(" --enable-hw-vlan-filter: enable hardware vlan filter.\n");
+ printf(" --enable-hw-vlan-strip: enable hardware vlan strip.\n");
+ printf(" --enable-hw-vlan-extend: enable hardware vlan extend.\n");
+ printf(" --enable-hw-qinq-strip: enable hardware qinq strip.\n");
printf(" --enable-drop-en: enable per queue packet drop.\n");
printf(" --disable-rss: disable rss.\n");
- printf(" --port-topology=N: set port topology (N: paired (default) or "
- "chained).\n");
+ printf(" --port-topology=<paired|chained|loop>: set port topology (paired "
+ "is default).\n");
printf(" --forward-mode=N: set forwarding mode (N: %s).\n",
list_pkt_forwarding_modes());
+ printf(" --forward-mode=5tswap: set forwarding mode to "
+ "swap L2,L3,L4 for MAC, IPv4/IPv6 and TCP/UDP only.\n");
printf(" --rss-ip: set RSS functions to IPv4/IPv6 only .\n");
printf(" --rss-udp: set RSS functions to IPv4/IPv6 + UDP.\n");
+ printf(" --rss-level-inner: set RSS hash level to innermost\n");
+ printf(" --rss-level-outer: set RSS hash level to outermost\n");
printf(" --rxq=N: set the number of RX queues per port to N.\n");
printf(" --rxd=N: set the number of descriptors in RX rings to N.\n");
printf(" --txq=N: set the number of TX queues per port to N.\n");
printf(" --txd=N: set the number of descriptors in TX rings to N.\n");
+ printf(" --hairpinq=N: set the number of hairpin queues per port to "
+ "N.\n");
printf(" --burst=N: set the number of packets per burst to N.\n");
+ printf(" --flowgen-clones=N: set the number of single packet clones to send in flowgen mode. Should be less than burst value.\n");
+ printf(" --flowgen-flows=N: set the number of flows in flowgen mode to N (1 <= N <= INT32_MAX).\n");
printf(" --mbcache=N: set the cache of mbuf memory pool to N.\n");
- printf(" --rxpt=N: set prefetch threshold register of RX rings to N "
- "(0 <= N <= 16).\n");
- printf(" --rxht=N: set the host threshold register of RX rings to N "
- "(0 <= N <= 16).\n");
+ printf(" --rxpt=N: set prefetch threshold register of RX rings to N.\n");
+ printf(" --rxht=N: set the host threshold register of RX rings to N.\n");
printf(" --rxfreet=N: set the free threshold of RX descriptors to N "
"(0 <= N < value of rxd).\n");
- printf(" --rxwt=N: set the write-back threshold register of RX rings "
- "to N (0 <= N <= 16).\n");
- printf(" --txpt=N: set the prefetch threshold register of TX rings "
- "to N (0 <= N <= 16).\n");
- printf(" --txht=N: set the nhost threshold register of TX rings to N "
- "(0 <= N <= 16).\n");
- printf(" --txwt=N: set the write-back threshold register of TX rings "
- "to N (0 <= N <= 16).\n");
+ printf(" --rxwt=N: set the write-back threshold register of RX rings to N.\n");
+ printf(" --txpt=N: set the prefetch threshold register of TX rings to N.\n");
+ printf(" --txht=N: set the nhost threshold register of TX rings to N.\n");
+ printf(" --txwt=N: set the write-back threshold register of TX rings to N.\n");
printf(" --txfreet=N: set the transmit free threshold of TX rings to N "
"(0 <= N <= value of txd).\n");
printf(" --txrst=N: set the transmit RS bit threshold of TX rings to N "
"(0 <= N <= value of txd).\n");
- printf(" --txqflags=0xXXXXXXXX: hexadecimal bitmask of TX queue flags "
- "(0 <= N <= 0x7FFFFFFF).\n");
- printf(" --tx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
- "tx queues statistics counters mapping "
- "(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
- printf(" --rx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
- "rx queues statistics counters mapping "
- "(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
printf(" --no-flush-rx: Don't flush RX streams before forwarding."
" Used mainly with PCAP drivers.\n");
- printf(" --txpkts=X[,Y]*: set TX segment sizes.\n");
+ printf(" --rxoffs=X[,Y]*: set RX segment offsets for split.\n");
+ printf(" --rxpkts=X[,Y]*: set RX segment sizes to split.\n");
+ printf(" --txpkts=X[,Y]*: set TX segment sizes"
+ " or total packet length.\n");
+ printf(" --txonly-multi-flow: generate multiple flows in txonly mode\n");
+ printf(" --tx-ip=src,dst: IP addresses in Tx-only mode\n");
+ printf(" --tx-udp=src[,dst]: UDP ports in Tx-only mode\n");
+ printf(" --eth-link-speed: force link speed.\n");
+ printf(" --rxq-share=X: number of ports per shared Rx queue groups, defaults to UINT32_MAX (1 group)\n");
printf(" --disable-link-check: disable check on link status when "
"starting/stopping ports.\n");
+ printf(" --disable-device-start: do not automatically start port\n");
+ printf(" --no-lsc-interrupt: disable link status change interrupt.\n");
+ printf(" --no-rmv-interrupt: disable device removal interrupt.\n");
+ printf(" --bitrate-stats=N: set the logical core N to perform "
+ "bit-rate calculation.\n");
+ printf(" --print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|flow_aged|all>: "
+ "enable print of designated event or all of them.\n");
+ printf(" --mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|flow_aged|all>: "
+ "disable print of designated event or all of them.\n");
+ printf(" --flow-isolate-all: "
+ "requests flow API isolated mode on all ports at initialization time.\n");
+ printf(" --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX queue offloads\n");
+ printf(" --rx-offloads=0xXXXXXXXX: hexadecimal bitmask of RX queue offloads\n");
+ printf(" --hot-plug: enable hot plug for device.\n");
+ printf(" --vxlan-gpe-port=N: UPD port of tunnel VXLAN-GPE\n");
+ printf(" --geneve-parsed-port=N: UPD port to parse GENEVE tunnel protocol\n");
+#ifndef RTE_EXEC_ENV_WINDOWS
+ printf(" --mlockall: lock all memory\n");
+ printf(" --no-mlockall: do not lock all memory\n");
+#endif
+ printf(" --mp-alloc <native|anon|xmem|xmemhuge>: mempool allocation method.\n"
+ " native: use regular DPDK memory to create and populate mempool\n"
+ " anon: use regular DPDK memory to create and anonymous memory to populate mempool\n"
+ " xmem: use anonymous memory to create and populate mempool\n"
+ " xmemhuge: use anonymous hugepage memory to create and populate mempool\n");
+ printf(" --noisy-tx-sw-buffer-size=N: size of FIFO buffer\n");
+ printf(" --noisy-tx-sw-buffer-flushtime=N: flush FIFO after N ms\n");
+ printf(" --noisy-lkup-memory=N: allocate N MB of VNF memory\n");
+ printf(" --noisy-lkup-num-writes=N: do N random writes per packet\n");
+ printf(" --noisy-lkup-num-reads=N: do N random reads per packet\n");
+ printf(" --noisy-lkup-num-reads-writes=N: do N random reads and writes per packet\n");
+ printf(" --no-iova-contig: mempool memory can be IOVA non contiguous. "
+ "valid only with --mp-alloc=anon\n");
+ printf(" --rx-mq-mode=0xX: hexadecimal bitmask of RX mq mode can be "
+ "enabled\n");
+ printf(" --record-core-cycles: enable measurement of CPU cycles.\n");
+ printf(" --record-burst-stats: enable display of RX and TX bursts.\n");
+ printf(" --hairpin-mode=0xXX: bitmask set the hairpin port mode.\n"
+ " 0x10 - explicit Tx rule, 0x02 - hairpin ports paired\n"
+ " 0x01 - hairpin ports loop, 0x00 - hairpin port self\n");
}
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
static int
-init_peer_eth_addrs(char *config_filename)
+init_peer_eth_addrs(const char *config_filename)
{
FILE *config_file;
portid_t i;
if (fgets(buf, sizeof(buf), config_file) == NULL)
break;
- if (cmdline_parse_etheraddr(NULL, buf, &peer_eth_addrs[i]) < 0 ){
- printf("Bad MAC address format on line %d\n", i+1);
+ if (rte_ether_unformat_addr(buf, &peer_eth_addrs[i]) < 0) {
+ fprintf(stderr, "Bad MAC address format on line %d\n",
+ i + 1);
fclose(config_file);
return -1;
}
set_fwd_ports_mask((uint64_t) pm);
}
-
-static int
-parse_queue_stats_mapping_config(const char *q_arg, int is_rx)
+static void
+print_invalid_socket_id_error(void)
{
- char s[256];
- const char *p, *p0 = q_arg;
- char *end;
- enum fieldnames {
- FLD_PORT = 0,
- FLD_QUEUE,
- FLD_STATS_COUNTER,
- _NUM_FLD
- };
- unsigned long int_fld[_NUM_FLD];
- char *str_fld[_NUM_FLD];
- int i;
- unsigned size;
-
- /* reset from value set at definition */
- is_rx ? (nb_rx_queue_stats_mappings = 0) : (nb_tx_queue_stats_mappings = 0);
-
- while ((p = strchr(p0,'(')) != NULL) {
- ++p;
- if((p0 = strchr(p,')')) == NULL)
- return -1;
-
- size = p0 - p;
- if(size >= sizeof(s))
- return -1;
-
- snprintf(s, sizeof(s), "%.*s", size, p);
- if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
- return -1;
- for (i = 0; i < _NUM_FLD; i++){
- errno = 0;
- int_fld[i] = strtoul(str_fld[i], &end, 0);
- if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
- return -1;
- }
- /* Check mapping field is in correct range (0..RTE_ETHDEV_QUEUE_STAT_CNTRS-1) */
- if (int_fld[FLD_STATS_COUNTER] >= RTE_ETHDEV_QUEUE_STAT_CNTRS) {
- printf("Stats counter not in the correct range 0..%d\n",
- RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
- return -1;
- }
-
- if (!is_rx) {
- if ((nb_tx_queue_stats_mappings >=
- MAX_TX_QUEUE_STATS_MAPPINGS)) {
- printf("exceeded max number of TX queue "
- "statistics mappings: %hu\n",
- nb_tx_queue_stats_mappings);
- return -1;
- }
- tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].port_id =
- (uint8_t)int_fld[FLD_PORT];
- tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].queue_id =
- (uint8_t)int_fld[FLD_QUEUE];
- tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].stats_counter_id =
- (uint8_t)int_fld[FLD_STATS_COUNTER];
- ++nb_tx_queue_stats_mappings;
- }
- else {
- if ((nb_rx_queue_stats_mappings >=
- MAX_RX_QUEUE_STATS_MAPPINGS)) {
- printf("exceeded max number of RX queue "
- "statistics mappings: %hu\n",
- nb_rx_queue_stats_mappings);
- return -1;
- }
- rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].port_id =
- (uint8_t)int_fld[FLD_PORT];
- rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].queue_id =
- (uint8_t)int_fld[FLD_QUEUE];
- rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].stats_counter_id =
- (uint8_t)int_fld[FLD_STATS_COUNTER];
- ++nb_rx_queue_stats_mappings;
- }
+ unsigned int i = 0;
+ fprintf(stderr, "Invalid socket id, options are: ");
+ for (i = 0; i < num_sockets; i++) {
+ fprintf(stderr, "%u%s", socket_ids[i],
+ (i == num_sockets - 1) ? "\n" : ",");
}
-/* Reassign the rx/tx_queue_stats_mappings pointer to point to this newly populated array rather */
-/* than to the default array (that was set at its definition) */
- is_rx ? (rx_queue_stats_mappings = rx_queue_stats_mappings_array) :
- (tx_queue_stats_mappings = tx_queue_stats_mappings_array);
- return 0;
}
static int
char s[256];
const char *p, *p0 = q_arg;
char *end;
- uint8_t i,port_id,socket_id;
+ uint8_t i, socket_id;
+ portid_t port_id;
unsigned size;
enum fieldnames {
FLD_PORT = 0,
if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
return -1;
}
- port_id = (uint8_t)int_fld[FLD_PORT];
- if (port_id >= nb_ports) {
- printf("Invalid port, range is [0, %d]\n", nb_ports - 1);
+ port_id = (portid_t)int_fld[FLD_PORT];
+ if (port_id_is_invalid(port_id, ENABLED_WARN) ||
+ port_id == (portid_t)RTE_PORT_ALL) {
+ print_valid_ports();
return -1;
}
socket_id = (uint8_t)int_fld[FLD_SOCKET];
- if(socket_id >= MAX_SOCKET) {
- printf("Invalid socket id, range is [0, %d]\n",
- MAX_SOCKET - 1);
- return -1;
+ if (new_socket_id(socket_id)) {
+ if (num_sockets >= RTE_MAX_NUMA_NODES) {
+ print_invalid_socket_id_error();
+ return -1;
+ }
+ socket_ids[num_sockets++] = socket_id;
}
port_numa[port_id] = socket_id;
}
char s[256];
const char *p, *p0 = q_arg;
char *end;
- uint8_t i,port_id,ring_flag,socket_id;
+ uint8_t i, ring_flag, socket_id;
+ portid_t port_id;
unsigned size;
enum fieldnames {
FLD_PORT = 0,
if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
return -1;
}
- port_id = (uint8_t)int_fld[FLD_PORT];
- if (port_id >= nb_ports) {
- printf("Invalid port, range is [0, %d]\n", nb_ports - 1);
+ port_id = (portid_t)int_fld[FLD_PORT];
+ if (port_id_is_invalid(port_id, ENABLED_WARN) ||
+ port_id == (portid_t)RTE_PORT_ALL) {
+ print_valid_ports();
return -1;
}
socket_id = (uint8_t)int_fld[FLD_SOCKET];
- if (socket_id >= MAX_SOCKET) {
- printf("Invalid socket id, range is [0, %d]\n",
- MAX_SOCKET - 1);
- return -1;
+ if (new_socket_id(socket_id)) {
+ if (num_sockets >= RTE_MAX_NUMA_NODES) {
+ print_invalid_socket_id_error();
+ return -1;
+ }
+ socket_ids[num_sockets++] = socket_id;
}
ring_flag = (uint8_t)int_fld[FLD_FLAG];
if ((ring_flag < RX_RING_ONLY) || (ring_flag > RXTX_RING)) {
- printf("Invalid ring-flag=%d config for port =%d\n",
+ fprintf(stderr,
+ "Invalid ring-flag=%d config for port =%d\n",
ring_flag,port_id);
return -1;
}
txring_numa[port_id] = socket_id;
break;
default:
- printf("Invalid ring-flag=%d config for port=%d\n",
+ fprintf(stderr,
+ "Invalid ring-flag=%d config for port=%d\n",
ring_flag,port_id);
break;
}
return 0;
}
-static unsigned int
-parse_item_list(char* str, unsigned int max_items, unsigned int *parsed_items)
+static int
+parse_event_printing_config(const char *optarg, int enable)
+{
+ uint32_t mask = 0;
+
+ if (!strcmp(optarg, "unknown"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN;
+ else if (!strcmp(optarg, "intr_lsc"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC;
+ else if (!strcmp(optarg, "queue_state"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE;
+ else if (!strcmp(optarg, "intr_reset"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET;
+ else if (!strcmp(optarg, "vf_mbox"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_VF_MBOX;
+ else if (!strcmp(optarg, "ipsec"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_IPSEC;
+ else if (!strcmp(optarg, "macsec"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_MACSEC;
+ else if (!strcmp(optarg, "intr_rmv"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV;
+ else if (!strcmp(optarg, "dev_probed"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_NEW;
+ else if (!strcmp(optarg, "dev_released"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_DESTROY;
+ else if (!strcmp(optarg, "flow_aged"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_FLOW_AGED;
+ else if (!strcmp(optarg, "all"))
+ mask = ~UINT32_C(0);
+ else {
+ fprintf(stderr, "Invalid event: %s\n", optarg);
+ return -1;
+ }
+ if (enable)
+ event_print_mask |= mask;
+ else
+ event_print_mask &= ~mask;
+ return 0;
+}
+
+static int
+parse_xstats_list(const char *in_str, struct rte_eth_xstat_name **xstats,
+ unsigned int *xstats_num)
{
- unsigned int nb_item;
- unsigned int value;
- unsigned int i;
- int value_ok;
- char c;
-
- /*
- * First parse all items in the list and store their value.
- */
- value = 0;
- nb_item = 0;
- value_ok = 0;
- for (i = 0; i < strlen(str); i++) {
- c = str[i];
- if ((c >= '0') && (c <= '9')) {
- value = (unsigned int) (value * 10 + (c - '0'));
- value_ok = 1;
+ int max_names_nb, names_nb, nonempty_names_nb;
+ int name, nonempty_name;
+ int stringlen;
+ char **names;
+ char *str;
+ int ret;
+ int i;
+
+ names = NULL;
+ str = strdup(in_str);
+ if (str == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ stringlen = strlen(str);
+
+ for (i = 0, max_names_nb = 1; str[i] != '\0'; i++) {
+ if (str[i] == ',')
+ max_names_nb++;
+ }
+
+ names = calloc(max_names_nb, sizeof(*names));
+ if (names == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ names_nb = rte_strsplit(str, stringlen, names, max_names_nb, ',');
+ if (names_nb < 0) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ nonempty_names_nb = 0;
+ for (i = 0; i < names_nb; i++) {
+ if (names[i][0] == '\0')
continue;
- }
- if (c != ',') {
- printf("character %c is not a decimal digit\n", c);
- return (0);
- }
- if (! value_ok) {
- printf("No valid value before comma\n");
- return (0);
- }
- if (nb_item < max_items) {
- parsed_items[nb_item] = value;
- value_ok = 0;
- value = 0;
- }
- nb_item++;
+ nonempty_names_nb++;
}
+ *xstats = calloc(nonempty_names_nb, sizeof(**xstats));
+ if (*xstats == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ for (name = nonempty_name = 0; name < names_nb; name++) {
+ if (names[name][0] == '\0')
+ continue;
+ rte_strscpy((*xstats)[nonempty_name].name, names[name],
+ sizeof((*xstats)[nonempty_name].name));
+ nonempty_name++;
+ }
+
+ *xstats_num = nonempty_names_nb;
+ ret = 0;
- if (nb_item >= max_items)
- rte_exit(EXIT_FAILURE, "too many txpkt segments!\n");
+out:
+ free(names);
+ free(str);
+ return ret;
+}
- parsed_items[nb_item++] = value;
+static int
+parse_link_speed(int n)
+{
+ uint32_t speed = RTE_ETH_LINK_SPEED_FIXED;
+
+ switch (n) {
+ case 1000:
+ speed |= RTE_ETH_LINK_SPEED_1G;
+ break;
+ case 10000:
+ speed |= RTE_ETH_LINK_SPEED_10G;
+ break;
+ case 25000:
+ speed |= RTE_ETH_LINK_SPEED_25G;
+ break;
+ case 40000:
+ speed |= RTE_ETH_LINK_SPEED_40G;
+ break;
+ case 50000:
+ speed |= RTE_ETH_LINK_SPEED_50G;
+ break;
+ case 100000:
+ speed |= RTE_ETH_LINK_SPEED_100G;
+ break;
+ case 200000:
+ speed |= RTE_ETH_LINK_SPEED_200G;
+ break;
+ case 100:
+ case 10:
+ default:
+ fprintf(stderr, "Unsupported fixed speed\n");
+ return 0;
+ }
- return (nb_item);
+ return speed;
}
void
launch_args_parse(int argc, char** argv)
{
+#define PARAM_PROC_ID "proc-id"
+#define PARAM_NUM_PROCS "num-procs"
+
int n, opt;
char **argvopt;
int opt_idx;
+ portid_t pid;
enum { TX, RX };
+ /* Default offloads for all ports. */
+ uint64_t rx_offloads = rx_mode.offloads;
+ uint64_t tx_offloads = tx_mode.offloads;
+ struct rte_eth_dev_info dev_info;
+ uint16_t rec_nb_pkts;
+ int ret;
static struct option lgopts[] = {
{ "help", 0, 0, 0 },
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
{ "interactive", 0, 0, 0 },
+ { "cmdline-file", 1, 0, 0 },
{ "auto-start", 0, 0, 0 },
{ "eth-peers-configfile", 1, 0, 0 },
{ "eth-peer", 1, 0, 0 },
#endif
- { "ports", 1, 0, 0 },
+ { "tx-first", 0, 0, 0 },
+ { "stats-period", 1, 0, 0 },
+ { "display-xstats", 1, 0, 0 },
{ "nb-cores", 1, 0, 0 },
{ "nb-ports", 1, 0, 0 },
{ "coremask", 1, 0, 0 },
{ "portmask", 1, 0, 0 },
+ { "portlist", 1, 0, 0 },
{ "numa", 0, 0, 0 },
- { "mp-anon", 0, 0, 0 },
+ { "no-numa", 0, 0, 0 },
+ { "mp-anon", 0, 0, 0 }, /* deprecated */
{ "port-numa-config", 1, 0, 0 },
{ "ring-numa-config", 1, 0, 0 },
{ "socket-num", 1, 0, 0 },
{ "mbuf-size", 1, 0, 0 },
{ "total-num-mbufs", 1, 0, 0 },
{ "max-pkt-len", 1, 0, 0 },
+ { "max-lro-pkt-size", 1, 0, 0 },
{ "pkt-filter-mode", 1, 0, 0 },
{ "pkt-filter-report-hash", 1, 0, 0 },
{ "pkt-filter-size", 1, 0, 0 },
- { "pkt-filter-flexbytes-offset",1, 0, 0 },
{ "pkt-filter-drop-queue", 1, 0, 0 },
- { "crc-strip", 0, 0, 0 },
+#ifdef RTE_LIB_LATENCYSTATS
+ { "latencystats", 1, 0, 0 },
+#endif
+#ifdef RTE_LIB_BITRATESTATS
+ { "bitrate-stats", 1, 0, 0 },
+#endif
+ { "disable-crc-strip", 0, 0, 0 },
+ { "enable-lro", 0, 0, 0 },
{ "enable-rx-cksum", 0, 0, 0 },
- { "disable-hw-vlan", 0, 0, 0 },
+ { "enable-rx-timestamp", 0, 0, 0 },
+ { "enable-scatter", 0, 0, 0 },
+ { "enable-hw-vlan", 0, 0, 0 },
+ { "enable-hw-vlan-filter", 0, 0, 0 },
+ { "enable-hw-vlan-strip", 0, 0, 0 },
+ { "enable-hw-vlan-extend", 0, 0, 0 },
+ { "enable-hw-qinq-strip", 0, 0, 0 },
{ "enable-drop-en", 0, 0, 0 },
{ "disable-rss", 0, 0, 0 },
{ "port-topology", 1, 0, 0 },
{ "forward-mode", 1, 0, 0 },
{ "rss-ip", 0, 0, 0 },
{ "rss-udp", 0, 0, 0 },
+ { "rss-level-outer", 0, 0, 0 },
+ { "rss-level-inner", 0, 0, 0 },
{ "rxq", 1, 0, 0 },
{ "txq", 1, 0, 0 },
{ "rxd", 1, 0, 0 },
{ "txd", 1, 0, 0 },
+ { "hairpinq", 1, 0, 0 },
+ { "hairpin-mode", 1, 0, 0 },
{ "burst", 1, 0, 0 },
+ { "flowgen-clones", 1, 0, 0 },
+ { "flowgen-flows", 1, 0, 0 },
{ "mbcache", 1, 0, 0 },
{ "txpt", 1, 0, 0 },
{ "txht", 1, 0, 0 },
{ "txwt", 1, 0, 0 },
{ "txfreet", 1, 0, 0 },
{ "txrst", 1, 0, 0 },
- { "txqflags", 1, 0, 0 },
{ "rxpt", 1, 0, 0 },
{ "rxht", 1, 0, 0 },
{ "rxwt", 1, 0, 0 },
{ "rxfreet", 1, 0, 0 },
- { "tx-queue-stats-mapping", 1, 0, 0 },
- { "rx-queue-stats-mapping", 1, 0, 0 },
{ "no-flush-rx", 0, 0, 0 },
+ { "flow-isolate-all", 0, 0, 0 },
+ { "rxoffs", 1, 0, 0 },
+ { "rxpkts", 1, 0, 0 },
{ "txpkts", 1, 0, 0 },
+ { "txonly-multi-flow", 0, 0, 0 },
+ { "rxq-share", 2, 0, 0 },
+ { "eth-link-speed", 1, 0, 0 },
{ "disable-link-check", 0, 0, 0 },
+ { "disable-device-start", 0, 0, 0 },
+ { "no-lsc-interrupt", 0, 0, 0 },
+ { "no-rmv-interrupt", 0, 0, 0 },
+ { "print-event", 1, 0, 0 },
+ { "mask-event", 1, 0, 0 },
+ { "tx-offloads", 1, 0, 0 },
+ { "rx-offloads", 1, 0, 0 },
+ { "hot-plug", 0, 0, 0 },
+ { "vxlan-gpe-port", 1, 0, 0 },
+ { "geneve-parsed-port", 1, 0, 0 },
+#ifndef RTE_EXEC_ENV_WINDOWS
+ { "mlockall", 0, 0, 0 },
+ { "no-mlockall", 0, 0, 0 },
+#endif
+ { "mp-alloc", 1, 0, 0 },
+ { "tx-ip", 1, 0, 0 },
+ { "tx-udp", 1, 0, 0 },
+ { "noisy-tx-sw-buffer-size", 1, 0, 0 },
+ { "noisy-tx-sw-buffer-flushtime", 1, 0, 0 },
+ { "noisy-lkup-memory", 1, 0, 0 },
+ { "noisy-lkup-num-writes", 1, 0, 0 },
+ { "noisy-lkup-num-reads", 1, 0, 0 },
+ { "noisy-lkup-num-reads-writes", 1, 0, 0 },
+ { "no-iova-contig", 0, 0, 0 },
+ { "rx-mq-mode", 1, 0, 0 },
+ { "record-core-cycles", 0, 0, 0 },
+ { "record-burst-stats", 0, 0, 0 },
+ { PARAM_NUM_PROCS, 1, 0, 0 },
+ { PARAM_PROC_ID, 1, 0, 0 },
{ 0, 0, 0, 0 },
};
argvopt = argv;
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
#define SHORTOPTS "i"
#else
#define SHORTOPTS ""
while ((opt = getopt_long(argc, argvopt, SHORTOPTS "ah",
lgopts, &opt_idx)) != EOF) {
switch (opt) {
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
case 'i':
printf("Interactive-mode selected\n");
interactive = 1;
case 0: /*long options */
if (!strcmp(lgopts[opt_idx].name, "help")) {
usage(argv[0]);
- rte_exit(EXIT_SUCCESS, "Displayed help\n");
+ exit(EXIT_SUCCESS);
}
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
if (!strcmp(lgopts[opt_idx].name, "interactive")) {
printf("Interactive-mode selected\n");
interactive = 1;
}
+ if (!strcmp(lgopts[opt_idx].name, "cmdline-file")) {
+ printf("CLI commands to be read from %s\n",
+ optarg);
+ strlcpy(cmdline_filename, optarg,
+ sizeof(cmdline_filename));
+ }
if (!strcmp(lgopts[opt_idx].name, "auto-start")) {
printf("Auto-start selected\n");
auto_start = 1;
}
+ if (!strcmp(lgopts[opt_idx].name, "tx-first")) {
+ printf("Ports to start sending a burst of "
+ "packets first\n");
+ tx_first = 1;
+ }
+ if (!strcmp(lgopts[opt_idx].name, "stats-period")) {
+ char *end = NULL;
+ unsigned int n;
+
+ n = strtoul(optarg, &end, 10);
+ if ((optarg[0] == '\0') || (end == NULL) ||
+ (*end != '\0'))
+ break;
+
+ stats_period = n;
+ break;
+ }
+ if (!strcmp(lgopts[opt_idx].name, "display-xstats")) {
+ char rc;
+
+ rc = parse_xstats_list(optarg, &xstats_display,
+ &xstats_display_num);
+ if (rc != 0)
+ rte_exit(EXIT_FAILURE,
+ "Failed to parse display-xstats argument: %d\n",
+ rc);
+ }
if (!strcmp(lgopts[opt_idx].name,
"eth-peers-configfile")) {
if (init_peer_eth_addrs(optarg) != 0)
}
if (!strcmp(lgopts[opt_idx].name, "eth-peer")) {
char *port_end;
- uint8_t c, peer_addr[6];
errno = 0;
n = strtoul(optarg, &port_end, 10);
"eth-peer: port %d >= RTE_MAX_ETHPORTS(%d)\n",
n, RTE_MAX_ETHPORTS);
- if (cmdline_parse_etheraddr(NULL, port_end, &peer_addr) < 0 )
+ if (rte_ether_unformat_addr(port_end,
+ &peer_eth_addrs[n]) < 0)
rte_exit(EXIT_FAILURE,
"Invalid ethernet address: %s\n",
port_end);
- for (c = 0; c < 6; c++)
- peer_eth_addrs[n].addr_bytes[c] =
- peer_addr[c];
nb_peer_eth_addrs++;
}
#endif
+ if (!strcmp(lgopts[opt_idx].name, "tx-ip")) {
+ struct in_addr in;
+ char *end;
+
+ end = strchr(optarg, ',');
+ if (end == optarg || !end)
+ rte_exit(EXIT_FAILURE,
+ "Invalid tx-ip: %s", optarg);
+
+ *end++ = 0;
+ if (inet_pton(AF_INET, optarg, &in) == 0)
+ rte_exit(EXIT_FAILURE,
+ "Invalid source IP address: %s\n",
+ optarg);
+ tx_ip_src_addr = rte_be_to_cpu_32(in.s_addr);
+
+ if (inet_pton(AF_INET, end, &in) == 0)
+ rte_exit(EXIT_FAILURE,
+ "Invalid destination IP address: %s\n",
+ optarg);
+ tx_ip_dst_addr = rte_be_to_cpu_32(in.s_addr);
+ }
+ if (!strcmp(lgopts[opt_idx].name, "tx-udp")) {
+ char *end = NULL;
+
+ errno = 0;
+ n = strtoul(optarg, &end, 10);
+ if (errno != 0 || end == optarg ||
+ n > UINT16_MAX ||
+ !(*end == '\0' || *end == ','))
+ rte_exit(EXIT_FAILURE,
+ "Invalid UDP port: %s\n",
+ optarg);
+ tx_udp_src_port = n;
+ if (*end == ',') {
+ char *dst = end + 1;
+
+ n = strtoul(dst, &end, 10);
+ if (errno != 0 || end == dst ||
+ n > UINT16_MAX || *end)
+ rte_exit(EXIT_FAILURE,
+ "Invalid destination UDP port: %s\n",
+ dst);
+ tx_udp_dst_port = n;
+ } else {
+ tx_udp_dst_port = n;
+ }
+
+ }
if (!strcmp(lgopts[opt_idx].name, "nb-ports")) {
n = atoi(optarg);
if (n > 0 && n <= nb_ports)
- nb_fwd_ports = (uint8_t) n;
+ nb_fwd_ports = n;
else
rte_exit(EXIT_FAILURE,
- "nb-ports should be > 0 and <= %d\n",
- nb_ports);
+ "Invalid port %d\n", n);
}
if (!strcmp(lgopts[opt_idx].name, "nb-cores")) {
n = atoi(optarg);
parse_fwd_coremask(optarg);
if (!strcmp(lgopts[opt_idx].name, "portmask"))
parse_fwd_portmask(optarg);
- if (!strcmp(lgopts[opt_idx].name, "numa")) {
+ if (!strcmp(lgopts[opt_idx].name, "portlist"))
+ parse_fwd_portlist(optarg);
+ if (!strcmp(lgopts[opt_idx].name, "no-numa"))
+ numa_support = 0;
+ if (!strcmp(lgopts[opt_idx].name, "numa"))
numa_support = 1;
- memset(port_numa,NUMA_NO_CONFIG,RTE_MAX_ETHPORTS);
- memset(rxring_numa,NUMA_NO_CONFIG,RTE_MAX_ETHPORTS);
- memset(txring_numa,NUMA_NO_CONFIG,RTE_MAX_ETHPORTS);
- }
if (!strcmp(lgopts[opt_idx].name, "mp-anon")) {
- mp_anon = 1;
+ mp_alloc_type = MP_ALLOC_ANON;
+ }
+ if (!strcmp(lgopts[opt_idx].name, "mp-alloc")) {
+ if (!strcmp(optarg, "native"))
+ mp_alloc_type = MP_ALLOC_NATIVE;
+ else if (!strcmp(optarg, "anon"))
+ mp_alloc_type = MP_ALLOC_ANON;
+ else if (!strcmp(optarg, "xmem"))
+ mp_alloc_type = MP_ALLOC_XMEM;
+ else if (!strcmp(optarg, "xmemhuge"))
+ mp_alloc_type = MP_ALLOC_XMEM_HUGE;
+ else if (!strcmp(optarg, "xbuf"))
+ mp_alloc_type = MP_ALLOC_XBUF;
+ else
+ rte_exit(EXIT_FAILURE,
+ "mp-alloc %s invalid - must be: "
+ "native, anon, xmem or xmemhuge\n",
+ optarg);
}
if (!strcmp(lgopts[opt_idx].name, "port-numa-config")) {
if (parse_portnuma_config(optarg))
"invalid ring-numa configuration\n");
if (!strcmp(lgopts[opt_idx].name, "socket-num")) {
n = atoi(optarg);
- if(n < MAX_SOCKET)
+ if (!new_socket_id((uint8_t)n)) {
socket_num = (uint8_t)n;
- else
+ } else {
+ print_invalid_socket_id_error();
rte_exit(EXIT_FAILURE,
- "The socket number should be < %d\n",
- MAX_SOCKET);
+ "Invalid socket id");
+ }
}
if (!strcmp(lgopts[opt_idx].name, "mbuf-size")) {
- n = atoi(optarg);
- if (n > 0 && n <= 0xFFFF)
- mbuf_data_size = (uint16_t) n;
- else
+ unsigned int mb_sz[MAX_SEGS_BUFFER_SPLIT];
+ unsigned int nb_segs, i;
+
+ nb_segs = parse_item_list(optarg, "mbuf-size",
+ MAX_SEGS_BUFFER_SPLIT, mb_sz, 0);
+ if (nb_segs <= 0)
rte_exit(EXIT_FAILURE,
- "mbuf-size should be > 0 and < 65536\n");
+ "bad mbuf-size\n");
+ for (i = 0; i < nb_segs; i++) {
+ if (mb_sz[i] <= 0 || mb_sz[i] > 0xFFFF)
+ rte_exit(EXIT_FAILURE,
+ "mbuf-size should be "
+ "> 0 and < 65536\n");
+ mbuf_data_size[i] = (uint16_t) mb_sz[i];
+ }
+ mbuf_data_size_n = nb_segs;
}
if (!strcmp(lgopts[opt_idx].name, "total-num-mbufs")) {
n = atoi(optarg);
}
if (!strcmp(lgopts[opt_idx].name, "max-pkt-len")) {
n = atoi(optarg);
- if (n >= ETHER_MIN_LEN) {
- rx_mode.max_rx_pkt_len = (uint32_t) n;
- if (n > ETHER_MAX_LEN)
- rx_mode.jumbo_frame = 1;
- } else
+ if (n >= RTE_ETHER_MIN_LEN)
+ max_rx_pkt_len = n;
+ else
rte_exit(EXIT_FAILURE,
"Invalid max-pkt-len=%d - should be > %d\n",
- n, ETHER_MIN_LEN);
+ n, RTE_ETHER_MIN_LEN);
+ }
+ if (!strcmp(lgopts[opt_idx].name, "max-lro-pkt-size")) {
+ n = atoi(optarg);
+ rx_mode.max_lro_pkt_size = (uint32_t) n;
}
if (!strcmp(lgopts[opt_idx].name, "pkt-filter-mode")) {
if (!strcmp(optarg, "signature"))
RTE_FDIR_MODE_SIGNATURE;
else if (!strcmp(optarg, "perfect"))
fdir_conf.mode = RTE_FDIR_MODE_PERFECT;
+ else if (!strcmp(optarg, "perfect-mac-vlan"))
+ fdir_conf.mode = RTE_FDIR_MODE_PERFECT_MAC_VLAN;
+ else if (!strcmp(optarg, "perfect-tunnel"))
+ fdir_conf.mode = RTE_FDIR_MODE_PERFECT_TUNNEL;
else if (!strcmp(optarg, "none"))
fdir_conf.mode = RTE_FDIR_MODE_NONE;
else
rte_exit(EXIT_FAILURE,
"pkt-mode-invalid %s invalid - must be: "
- "none, signature or perfect\n",
+ "none, signature, perfect, perfect-mac-vlan"
+ " or perfect-tunnel\n",
optarg);
}
if (!strcmp(lgopts[opt_idx].name,
if (!strcmp(lgopts[opt_idx].name, "pkt-filter-size")) {
if (!strcmp(optarg, "64K"))
fdir_conf.pballoc =
- RTE_FDIR_PBALLOC_64K;
+ RTE_ETH_FDIR_PBALLOC_64K;
else if (!strcmp(optarg, "128K"))
fdir_conf.pballoc =
- RTE_FDIR_PBALLOC_128K;
+ RTE_ETH_FDIR_PBALLOC_128K;
else if (!strcmp(optarg, "256K"))
fdir_conf.pballoc =
- RTE_FDIR_PBALLOC_256K;
+ RTE_ETH_FDIR_PBALLOC_256K;
else
rte_exit(EXIT_FAILURE, "pkt-filter-size %s invalid -"
" must be: 64K or 128K or 256K\n",
optarg);
}
- if (!strcmp(lgopts[opt_idx].name,
- "pkt-filter-flexbytes-offset")) {
- n = atoi(optarg);
- if ( n >= 0 && n <= (int) 32)
- fdir_conf.flexbytes_offset =
- (uint8_t) n;
- else
- rte_exit(EXIT_FAILURE,
- "flexbytes %d invalid - must"
- "be >= 0 && <= 32\n", n);
- }
if (!strcmp(lgopts[opt_idx].name,
"pkt-filter-drop-queue")) {
n = atoi(optarg);
"drop queue %d invalid - must"
"be >= 0 \n", n);
}
- if (!strcmp(lgopts[opt_idx].name, "crc-strip"))
- rx_mode.hw_strip_crc = 1;
+#ifdef RTE_LIB_LATENCYSTATS
+ if (!strcmp(lgopts[opt_idx].name,
+ "latencystats")) {
+ n = atoi(optarg);
+ if (n >= 0) {
+ latencystats_lcore_id = (lcoreid_t) n;
+ latencystats_enabled = 1;
+ } else
+ rte_exit(EXIT_FAILURE,
+ "invalid lcore id %d for latencystats"
+ " must be >= 0\n", n);
+ }
+#endif
+#ifdef RTE_LIB_BITRATESTATS
+ if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) {
+ n = atoi(optarg);
+ if (n >= 0) {
+ bitrate_lcore_id = (lcoreid_t) n;
+ bitrate_enabled = 1;
+ } else
+ rte_exit(EXIT_FAILURE,
+ "invalid lcore id %d for bitrate stats"
+ " must be >= 0\n", n);
+ }
+#endif
+ if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip"))
+ rx_offloads |= RTE_ETH_RX_OFFLOAD_KEEP_CRC;
+ if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
+ rx_offloads |= RTE_ETH_RX_OFFLOAD_TCP_LRO;
+ if (!strcmp(lgopts[opt_idx].name, "enable-scatter"))
+ rx_offloads |= RTE_ETH_RX_OFFLOAD_SCATTER;
if (!strcmp(lgopts[opt_idx].name, "enable-rx-cksum"))
- rx_mode.hw_ip_checksum = 1;
+ rx_offloads |= RTE_ETH_RX_OFFLOAD_CHECKSUM;
+ if (!strcmp(lgopts[opt_idx].name,
+ "enable-rx-timestamp"))
+ rx_offloads |= RTE_ETH_RX_OFFLOAD_TIMESTAMP;
+ if (!strcmp(lgopts[opt_idx].name, "enable-hw-vlan"))
+ rx_offloads |= RTE_ETH_RX_OFFLOAD_VLAN;
- if (!strcmp(lgopts[opt_idx].name, "disable-hw-vlan")) {
- rx_mode.hw_vlan_filter = 0;
- rx_mode.hw_vlan_strip = 0;
- rx_mode.hw_vlan_extend = 0;
- }
+ if (!strcmp(lgopts[opt_idx].name,
+ "enable-hw-vlan-filter"))
+ rx_offloads |= RTE_ETH_RX_OFFLOAD_VLAN_FILTER;
+
+ if (!strcmp(lgopts[opt_idx].name,
+ "enable-hw-vlan-strip"))
+ rx_offloads |= RTE_ETH_RX_OFFLOAD_VLAN_STRIP;
+
+ if (!strcmp(lgopts[opt_idx].name,
+ "enable-hw-vlan-extend"))
+ rx_offloads |= RTE_ETH_RX_OFFLOAD_VLAN_EXTEND;
+
+ if (!strcmp(lgopts[opt_idx].name,
+ "enable-hw-qinq-strip"))
+ rx_offloads |= RTE_ETH_RX_OFFLOAD_QINQ_STRIP;
if (!strcmp(lgopts[opt_idx].name, "enable-drop-en"))
rx_drop_en = 1;
port_topology = PORT_TOPOLOGY_LOOP;
else
rte_exit(EXIT_FAILURE, "port-topology %s invalid -"
- " must be: paired or chained \n",
+ " must be: paired, chained or loop\n",
optarg);
}
if (!strcmp(lgopts[opt_idx].name, "forward-mode"))
set_pkt_forwarding_mode(optarg);
if (!strcmp(lgopts[opt_idx].name, "rss-ip"))
- rss_hf = ETH_RSS_IP;
+ rss_hf = RTE_ETH_RSS_IP;
if (!strcmp(lgopts[opt_idx].name, "rss-udp"))
- rss_hf = ETH_RSS_UDP;
+ rss_hf = RTE_ETH_RSS_UDP;
+ if (!strcmp(lgopts[opt_idx].name, "rss-level-inner"))
+ rss_hf |= RTE_ETH_RSS_LEVEL_INNERMOST;
+ if (!strcmp(lgopts[opt_idx].name, "rss-level-outer"))
+ rss_hf |= RTE_ETH_RSS_LEVEL_OUTERMOST;
if (!strcmp(lgopts[opt_idx].name, "rxq")) {
n = atoi(optarg);
- if (n >= 1 && n <= (int) MAX_QUEUE_ID)
+ if (n >= 0 && check_nb_rxq((queueid_t)n) == 0)
nb_rxq = (queueid_t) n;
else
rte_exit(EXIT_FAILURE, "rxq %d invalid - must be"
- " >= 1 && <= %d\n", n,
- (int) MAX_QUEUE_ID);
+ " >= 0 && <= %u\n", n,
+ get_allowed_max_nb_rxq(&pid));
}
if (!strcmp(lgopts[opt_idx].name, "txq")) {
n = atoi(optarg);
- if (n >= 1 && n <= (int) MAX_QUEUE_ID)
+ if (n >= 0 && check_nb_txq((queueid_t)n) == 0)
nb_txq = (queueid_t) n;
else
rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
- " >= 1 && <= %d\n", n,
- (int) MAX_QUEUE_ID);
+ " >= 0 && <= %u\n", n,
+ get_allowed_max_nb_txq(&pid));
}
- if (!strcmp(lgopts[opt_idx].name, "rxd")) {
+ if (!strcmp(lgopts[opt_idx].name, "hairpinq")) {
n = atoi(optarg);
- if (n > 0)
- nb_rxd = (uint16_t) n;
+ if (n >= 0 &&
+ check_nb_hairpinq((queueid_t)n) == 0)
+ nb_hairpinq = (queueid_t) n;
else
- rte_exit(EXIT_FAILURE, "rxd must be > 0\n");
+ rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
+ " >= 0 && <= %u\n", n,
+ get_allowed_max_nb_hairpinq
+ (&pid));
+ if ((n + nb_txq) < 0 ||
+ check_nb_txq((queueid_t)(n + nb_txq)) != 0)
+ rte_exit(EXIT_FAILURE, "txq + hairpinq "
+ "%d invalid - must be"
+ " >= 0 && <= %u\n",
+ n + nb_txq,
+ get_allowed_max_nb_txq(&pid));
+ if ((n + nb_rxq) < 0 ||
+ check_nb_rxq((queueid_t)(n + nb_rxq)) != 0)
+ rte_exit(EXIT_FAILURE, "rxq + hairpinq "
+ "%d invalid - must be"
+ " >= 0 && <= %u\n",
+ n + nb_rxq,
+ get_allowed_max_nb_rxq(&pid));
}
- if (!strcmp(lgopts[opt_idx].name, "txd")) {
- n = atoi(optarg);
- if (n > 0)
- nb_txd = (uint16_t) n;
+ if (!nb_rxq && !nb_txq) {
+ rte_exit(EXIT_FAILURE, "Either rx or tx queues should "
+ "be non-zero\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name, "hairpin-mode")) {
+ char *end = NULL;
+ unsigned int n;
+
+ errno = 0;
+ n = strtoul(optarg, &end, 0);
+ if (errno != 0 || end == optarg)
+ rte_exit(EXIT_FAILURE, "hairpin mode invalid\n");
else
- rte_exit(EXIT_FAILURE, "txd must be in > 0\n");
+ hairpin_mode = (uint16_t)n;
}
if (!strcmp(lgopts[opt_idx].name, "burst")) {
n = atoi(optarg);
- if ((n >= 1) && (n <= MAX_PKT_BURST))
+ if (n == 0) {
+ /* A burst size of zero means that the
+ * PMD should be queried for
+ * recommended Rx burst size. Since
+ * testpmd uses a single size for all
+ * ports, port 0 is queried for the
+ * value, on the assumption that all
+ * ports are of the same NIC model.
+ */
+ ret = eth_dev_info_get_print_err(
+ 0,
+ &dev_info);
+ if (ret != 0)
+ return;
+
+ rec_nb_pkts = dev_info
+ .default_rxportconf.burst_size;
+
+ if (rec_nb_pkts == 0)
+ rte_exit(EXIT_FAILURE,
+ "PMD does not recommend a burst size. "
+ "Provided value must be between "
+ "1 and %d\n", MAX_PKT_BURST);
+ else if (rec_nb_pkts > MAX_PKT_BURST)
+ rte_exit(EXIT_FAILURE,
+ "PMD recommended burst size of %d"
+ " exceeds maximum value of %d\n",
+ rec_nb_pkts, MAX_PKT_BURST);
+ printf("Using PMD-provided burst value of %d\n",
+ rec_nb_pkts);
+ nb_pkt_per_burst = rec_nb_pkts;
+ } else if (n > MAX_PKT_BURST)
+ rte_exit(EXIT_FAILURE,
+ "burst must be between1 and %d\n",
+ MAX_PKT_BURST);
+ else
nb_pkt_per_burst = (uint16_t) n;
+ }
+ if (!strcmp(lgopts[opt_idx].name, "flowgen-clones")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ nb_pkt_flowgen_clones = (uint16_t) n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "clones must be >= 0 and <= current burst\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name, "flowgen-flows")) {
+ n = atoi(optarg);
+ if (n > 0)
+ nb_flows_flowgen = (int) n;
else
rte_exit(EXIT_FAILURE,
- "burst must >= 1 and <= %d]",
- MAX_PKT_BURST);
+ "flows must be >= 1\n");
}
if (!strcmp(lgopts[opt_idx].name, "mbcache")) {
n = atoi(optarg);
"mbcache must be >= 0 and <= %d\n",
RTE_MEMPOOL_CACHE_MAX_SIZE);
}
- if (!strcmp(lgopts[opt_idx].name, "txpt")) {
- n = atoi(optarg);
- if (n >= 0)
- tx_thresh.pthresh = (uint8_t)n;
- else
- rte_exit(EXIT_FAILURE, "txpt must be >= 0\n");
- }
- if (!strcmp(lgopts[opt_idx].name, "txht")) {
- n = atoi(optarg);
- if (n >= 0)
- tx_thresh.hthresh = (uint8_t)n;
- else
- rte_exit(EXIT_FAILURE, "txht must be >= 0\n");
- }
- if (!strcmp(lgopts[opt_idx].name, "txwt")) {
- n = atoi(optarg);
- if (n >= 0)
- tx_thresh.wthresh = (uint8_t)n;
- else
- rte_exit(EXIT_FAILURE, "txwt must be >= 0\n");
- }
if (!strcmp(lgopts[opt_idx].name, "txfreet")) {
n = atoi(optarg);
if (n >= 0)
- tx_free_thresh = (uint16_t)n;
+ tx_free_thresh = (int16_t)n;
else
rte_exit(EXIT_FAILURE, "txfreet must be >= 0\n");
}
if (!strcmp(lgopts[opt_idx].name, "txrst")) {
n = atoi(optarg);
if (n >= 0)
- tx_rs_thresh = (uint16_t)n;
+ tx_rs_thresh = (int16_t)n;
else
rte_exit(EXIT_FAILURE, "txrst must be >= 0\n");
}
- if (!strcmp(lgopts[opt_idx].name, "txqflags")) {
- char *end = NULL;
- n = strtoul(optarg, &end, 16);
- if (n >= 0)
- txq_flags = (uint32_t)n;
- else
- rte_exit(EXIT_FAILURE,
- "txqflags must be >= 0\n");
- }
- if (!strcmp(lgopts[opt_idx].name, "rxpt")) {
- n = atoi(optarg);
- if (n >= 0)
- rx_thresh.pthresh = (uint8_t)n;
- else
- rte_exit(EXIT_FAILURE, "rxpt must be >= 0\n");
- }
- if (!strcmp(lgopts[opt_idx].name, "rxht")) {
- n = atoi(optarg);
- if (n >= 0)
- rx_thresh.hthresh = (uint8_t)n;
- else
- rte_exit(EXIT_FAILURE, "rxht must be >= 0\n");
- }
- if (!strcmp(lgopts[opt_idx].name, "rxwt")) {
- n = atoi(optarg);
- if (n >= 0)
- rx_thresh.wthresh = (uint8_t)n;
- else
- rte_exit(EXIT_FAILURE, "rxwt must be >= 0\n");
- }
if (!strcmp(lgopts[opt_idx].name, "rxd")) {
n = atoi(optarg);
if (n > 0) {
if (!strcmp(lgopts[opt_idx].name, "txpt")) {
n = atoi(optarg);
if (n >= 0)
- tx_thresh.pthresh = (uint8_t)n;
+ tx_pthresh = (int8_t)n;
else
rte_exit(EXIT_FAILURE, "txpt must be >= 0\n");
}
if (!strcmp(lgopts[opt_idx].name, "txht")) {
n = atoi(optarg);
if (n >= 0)
- tx_thresh.hthresh = (uint8_t)n;
+ tx_hthresh = (int8_t)n;
else
rte_exit(EXIT_FAILURE, "txht must be >= 0\n");
}
if (!strcmp(lgopts[opt_idx].name, "txwt")) {
n = atoi(optarg);
if (n >= 0)
- tx_thresh.wthresh = (uint8_t)n;
+ tx_wthresh = (int8_t)n;
else
rte_exit(EXIT_FAILURE, "txwt must be >= 0\n");
}
if (!strcmp(lgopts[opt_idx].name, "rxpt")) {
n = atoi(optarg);
if (n >= 0)
- rx_thresh.pthresh = (uint8_t)n;
+ rx_pthresh = (int8_t)n;
else
rte_exit(EXIT_FAILURE, "rxpt must be >= 0\n");
}
if (!strcmp(lgopts[opt_idx].name, "rxht")) {
n = atoi(optarg);
if (n >= 0)
- rx_thresh.hthresh = (uint8_t)n;
+ rx_hthresh = (int8_t)n;
else
rte_exit(EXIT_FAILURE, "rxht must be >= 0\n");
}
if (!strcmp(lgopts[opt_idx].name, "rxwt")) {
n = atoi(optarg);
if (n >= 0)
- rx_thresh.wthresh = (uint8_t)n;
+ rx_wthresh = (int8_t)n;
else
rte_exit(EXIT_FAILURE, "rxwt must be >= 0\n");
}
if (!strcmp(lgopts[opt_idx].name, "rxfreet")) {
n = atoi(optarg);
if (n >= 0)
- rx_free_thresh = (uint16_t)n;
+ rx_free_thresh = (int16_t)n;
else
rte_exit(EXIT_FAILURE, "rxfreet must be >= 0\n");
}
- if (!strcmp(lgopts[opt_idx].name, "tx-queue-stats-mapping")) {
- if (parse_queue_stats_mapping_config(optarg, TX)) {
- rte_exit(EXIT_FAILURE,
- "invalid TX queue statistics mapping config entered\n");
- }
+ if (!strcmp(lgopts[opt_idx].name, "rxoffs")) {
+ unsigned int seg_off[MAX_SEGS_BUFFER_SPLIT];
+ unsigned int nb_offs;
+
+ nb_offs = parse_item_list
+ (optarg, "rxpkt offsets",
+ MAX_SEGS_BUFFER_SPLIT,
+ seg_off, 0);
+ if (nb_offs > 0)
+ set_rx_pkt_offsets(seg_off, nb_offs);
+ else
+ rte_exit(EXIT_FAILURE, "bad rxoffs\n");
}
- if (!strcmp(lgopts[opt_idx].name, "rx-queue-stats-mapping")) {
- if (parse_queue_stats_mapping_config(optarg, RX)) {
- rte_exit(EXIT_FAILURE,
- "invalid RX queue statistics mapping config entered\n");
- }
+ if (!strcmp(lgopts[opt_idx].name, "rxpkts")) {
+ unsigned int seg_len[MAX_SEGS_BUFFER_SPLIT];
+ unsigned int nb_segs;
+
+ nb_segs = parse_item_list
+ (optarg, "rxpkt segments",
+ MAX_SEGS_BUFFER_SPLIT,
+ seg_len, 0);
+ if (nb_segs > 0)
+ set_rx_pkt_segments(seg_len, nb_segs);
+ else
+ rte_exit(EXIT_FAILURE, "bad rxpkts\n");
}
if (!strcmp(lgopts[opt_idx].name, "txpkts")) {
unsigned seg_lengths[RTE_MAX_SEGS_PER_PKT];
unsigned int nb_segs;
- nb_segs = parse_item_list(optarg, RTE_MAX_SEGS_PER_PKT, seg_lengths);
+ nb_segs = parse_item_list(optarg, "txpkt segments",
+ RTE_MAX_SEGS_PER_PKT, seg_lengths, 0);
if (nb_segs > 0)
set_tx_pkt_segments(seg_lengths, nb_segs);
else
rte_exit(EXIT_FAILURE, "bad txpkts\n");
}
+ if (!strcmp(lgopts[opt_idx].name, "txonly-multi-flow"))
+ txonly_multi_flow = 1;
+ if (!strcmp(lgopts[opt_idx].name, "rxq-share")) {
+ if (optarg == NULL) {
+ rxq_share = UINT32_MAX;
+ } else {
+ n = atoi(optarg);
+ if (n >= 0)
+ rxq_share = (uint32_t)n;
+ else
+ rte_exit(EXIT_FAILURE, "rxq-share must be >= 0\n");
+ }
+ }
if (!strcmp(lgopts[opt_idx].name, "no-flush-rx"))
no_flush_rx = 1;
+ if (!strcmp(lgopts[opt_idx].name, "eth-link-speed")) {
+ n = atoi(optarg);
+ if (n >= 0 && parse_link_speed(n) > 0)
+ eth_link_speed = parse_link_speed(n);
+ }
if (!strcmp(lgopts[opt_idx].name, "disable-link-check"))
no_link_check = 1;
+ if (!strcmp(lgopts[opt_idx].name, "disable-device-start"))
+ no_device_start = 1;
+ if (!strcmp(lgopts[opt_idx].name, "no-lsc-interrupt"))
+ lsc_interrupt = 0;
+ if (!strcmp(lgopts[opt_idx].name, "no-rmv-interrupt"))
+ rmv_interrupt = 0;
+ if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
+ flow_isolate_all = 1;
+ if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
+ char *end = NULL;
+ n = strtoull(optarg, &end, 16);
+ if (n >= 0)
+ tx_offloads = (uint64_t)n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "tx-offloads must be >= 0\n");
+ }
+
+ if (!strcmp(lgopts[opt_idx].name, "rx-offloads")) {
+ char *end = NULL;
+ n = strtoull(optarg, &end, 16);
+ if (n >= 0)
+ rx_offloads = (uint64_t)n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "rx-offloads must be >= 0\n");
+ }
+
+ if (!strcmp(lgopts[opt_idx].name, "vxlan-gpe-port")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ vxlan_gpe_udp_port = (uint16_t)n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "vxlan-gpe-port must be >= 0\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name,
+ "geneve-parsed-port")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ geneve_udp_port = (uint16_t)n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "geneve-parsed-port must be >= 0\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name, "print-event"))
+ if (parse_event_printing_config(optarg, 1)) {
+ rte_exit(EXIT_FAILURE,
+ "invalid print-event argument\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name, "mask-event"))
+ if (parse_event_printing_config(optarg, 0)) {
+ rte_exit(EXIT_FAILURE,
+ "invalid mask-event argument\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name, "hot-plug"))
+ hot_plug = 1;
+ if (!strcmp(lgopts[opt_idx].name, "mlockall"))
+ do_mlockall = 1;
+ if (!strcmp(lgopts[opt_idx].name, "no-mlockall"))
+ do_mlockall = 0;
+ if (!strcmp(lgopts[opt_idx].name,
+ "noisy-tx-sw-buffer-size")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ noisy_tx_sw_bufsz = n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "noisy-tx-sw-buffer-size must be >= 0\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name,
+ "noisy-tx-sw-buffer-flushtime")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ noisy_tx_sw_buf_flush_time = n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "noisy-tx-sw-buffer-flushtime must be >= 0\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name,
+ "noisy-lkup-memory")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ noisy_lkup_mem_sz = n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "noisy-lkup-memory must be >= 0\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name,
+ "noisy-lkup-num-writes")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ noisy_lkup_num_writes = n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "noisy-lkup-num-writes must be >= 0\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name,
+ "noisy-lkup-num-reads")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ noisy_lkup_num_reads = n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "noisy-lkup-num-reads must be >= 0\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name,
+ "noisy-lkup-num-reads-writes")) {
+ n = atoi(optarg);
+ if (n >= 0)
+ noisy_lkup_num_reads_writes = n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "noisy-lkup-num-reads-writes must be >= 0\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name, "no-iova-contig"))
+ mempool_flags = RTE_MEMPOOL_F_NO_IOVA_CONTIG;
+ if (!strcmp(lgopts[opt_idx].name, "rx-mq-mode")) {
+ char *end = NULL;
+ n = strtoul(optarg, &end, 16);
+ if (n >= 0 && n <= RTE_ETH_MQ_RX_VMDQ_DCB_RSS)
+ rx_mq_mode = (enum rte_eth_rx_mq_mode)n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "rx-mq-mode must be >= 0 and <= %d\n",
+ RTE_ETH_MQ_RX_VMDQ_DCB_RSS);
+ }
+ if (!strcmp(lgopts[opt_idx].name, "record-core-cycles"))
+ record_core_cycles = 1;
+ if (!strcmp(lgopts[opt_idx].name, "record-burst-stats"))
+ record_burst_stats = 1;
+ if (!strcmp(lgopts[opt_idx].name, PARAM_NUM_PROCS))
+ num_procs = atoi(optarg);
+ if (!strcmp(lgopts[opt_idx].name, PARAM_PROC_ID))
+ proc_id = atoi(optarg);
break;
case 'h':
usage(argv[0]);
- rte_exit(EXIT_SUCCESS, "Displayed help\n");
+ exit(EXIT_SUCCESS);
break;
default:
usage(argv[0]);
+ fprintf(stderr, "Invalid option: %s\n", argv[optind]);
rte_exit(EXIT_FAILURE,
"Command line is incomplete or incorrect\n");
break;
}
}
+
+ if (optind != argc) {
+ usage(argv[0]);
+ fprintf(stderr, "Invalid parameter: %s\n", argv[optind]);
+ rte_exit(EXIT_FAILURE, "Command line is incorrect\n");
+ }
+
+ if (proc_id >= (int)num_procs)
+ rte_exit(EXIT_FAILURE,
+ "The multi-process option '%s(%d)' should be less than '%s(%u)'\n",
+ PARAM_PROC_ID, proc_id,
+ PARAM_NUM_PROCS, num_procs);
+
+ /* Set offload configuration from command line parameters. */
+ rx_mode.offloads = rx_offloads;
+ tx_mode.offloads = tx_offloads;
+
+ if (mempool_flags & RTE_MEMPOOL_F_NO_IOVA_CONTIG &&
+ mp_alloc_type != MP_ALLOC_ANON) {
+ TESTPMD_LOG(WARNING, "cannot use no-iova-contig without "
+ "mp-alloc=anon. mempool no-iova-contig is "
+ "ignored\n");
+ mempool_flags = 0;
+ }
}