#include <sys/mman.h>
#include <sys/types.h>
#include <errno.h>
+#include <stdbool.h>
#include <sys/queue.h>
#include <sys/stat.h>
#include <rte_mempool.h>
#include <rte_malloc.h>
#include <rte_mbuf.h>
+#include <rte_mbuf_pool_ops.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#include <rte_ether.h>
*/
uint8_t mp_anon = 0;
+/*
+ * Store specified sockets on which memory pool to be used by ports
+ * is allocated.
+ */
+uint8_t port_numa[RTE_MAX_ETHPORTS];
+
+/*
+ * Store specified sockets on which RX ring to be used by ports
+ * is allocated.
+ */
+uint8_t rxring_numa[RTE_MAX_ETHPORTS];
+
+/*
+ * Store specified sockets on which TX ring to be used by ports
+ * is allocated.
+ */
+uint8_t txring_numa[RTE_MAX_ETHPORTS];
+
/*
* Record the Ethernet address of peer target ports to which packets are
* forwarded.
/*
* Configurable number of RX/TX ring descriptors.
+ * Defaults are supplied by drivers via ethdev.
*/
-#define RTE_TEST_RX_DESC_DEFAULT 128
-#define RTE_TEST_TX_DESC_DEFAULT 512
+#define RTE_TEST_RX_DESC_DEFAULT 0
+#define RTE_TEST_TX_DESC_DEFAULT 0
uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT; /**< Number of RX descriptors. */
uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT; /**< Number of TX descriptors. */
*/
uint8_t rmv_interrupt = 1; /* enabled by default */
+uint8_t hot_plug = 0; /**< hotplug disabled by default. */
+
/*
* Display or mask ether events
* Default to all events except VF_MBOX
*/
struct rte_eth_rxmode rx_mode = {
.max_rx_pkt_len = ETHER_MAX_LEN, /**< Default maximum frame length. */
- .offloads = (DEV_RX_OFFLOAD_VLAN_FILTER |
- DEV_RX_OFFLOAD_VLAN_STRIP |
- DEV_RX_OFFLOAD_CRC_STRIP),
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
.ignore_offload_bitfield = 1,
};
-struct rte_eth_txmode tx_mode;
+struct rte_eth_txmode tx_mode = {
+ .offloads = DEV_TX_OFFLOAD_MBUF_FAST_FREE,
+};
struct rte_fdir_conf fdir_conf = {
.mode = RTE_FDIR_MODE_NONE,
static int eth_event_callback(portid_t port_id,
enum rte_eth_event_type type,
void *param, void *ret_param);
+static void eth_dev_event_callback(char *device_name,
+ enum rte_dev_event_type type,
+ void *param);
+static int eth_dev_event_callback_register(void);
+static int eth_dev_event_callback_unregister(void);
+
/*
* Check if all the ports are started.
rte_mempool_obj_iter(rte_mp, rte_pktmbuf_init, NULL);
} else {
/* wrapper to rte_mempool_create() */
+ TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n",
+ rte_mbuf_best_mempool_ops());
rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
mb_mempool_cache, 0, mbuf_seg_size, socket_id);
}
return 0;
}
+/*
+ * Get the allowed maximum number of RX queues.
+ * *pid return the port id which has minimal value of
+ * max_rx_queues in all ports.
+ */
+queueid_t
+get_allowed_max_nb_rxq(portid_t *pid)
+{
+ queueid_t allowed_max_rxq = MAX_QUEUE_ID;
+ portid_t pi;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ rte_eth_dev_info_get(pi, &dev_info);
+ if (dev_info.max_rx_queues < allowed_max_rxq) {
+ allowed_max_rxq = dev_info.max_rx_queues;
+ *pid = pi;
+ }
+ }
+ return allowed_max_rxq;
+}
+
+/*
+ * Check input rxq is valid or not.
+ * If input rxq is not greater than any of maximum number
+ * of RX queues of all ports, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_rxq(queueid_t rxq)
+{
+ queueid_t allowed_max_rxq;
+ portid_t pid = 0;
+
+ allowed_max_rxq = get_allowed_max_nb_rxq(&pid);
+ if (rxq > allowed_max_rxq) {
+ printf("Fail: input rxq (%u) can't be greater "
+ "than max_rx_queues (%u) of port %u\n",
+ rxq,
+ allowed_max_rxq,
+ pid);
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * Get the allowed maximum number of TX queues.
+ * *pid return the port id which has minimal value of
+ * max_tx_queues in all ports.
+ */
+queueid_t
+get_allowed_max_nb_txq(portid_t *pid)
+{
+ queueid_t allowed_max_txq = MAX_QUEUE_ID;
+ portid_t pi;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ rte_eth_dev_info_get(pi, &dev_info);
+ if (dev_info.max_tx_queues < allowed_max_txq) {
+ allowed_max_txq = dev_info.max_tx_queues;
+ *pid = pi;
+ }
+ }
+ return allowed_max_txq;
+}
+
+/*
+ * Check input txq is valid or not.
+ * If input txq is not greater than any of maximum number
+ * of TX queues of all ports, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_txq(queueid_t txq)
+{
+ queueid_t allowed_max_txq;
+ portid_t pid = 0;
+
+ allowed_max_txq = get_allowed_max_nb_txq(&pid);
+ if (txq > allowed_max_txq) {
+ printf("Fail: input txq (%u) can't be greater "
+ "than max_tx_queues (%u) of port %u\n",
+ txq,
+ allowed_max_txq,
+ pid);
+ return -1;
+ }
+ return 0;
+}
+
static void
init_config(void)
{
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
- /* Apply default Tx configuration for all ports */
+ /* Apply default TxRx configuration for all ports */
port->dev_conf.txmode = tx_mode;
+ port->dev_conf.rxmode = rx_mode;
rte_eth_dev_info_get(pid, &port->dev_info);
-
+ if (!(port->dev_info.tx_offload_capa &
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE))
+ port->dev_conf.txmode.offloads &=
+ ~DEV_TX_OFFLOAD_MBUF_FAST_FREE;
if (numa_support) {
if (port_numa[pid] != NUMA_NO_CONFIG)
port_per_socket[port_numa[pid]]++;
}
}
- for (event_type = RTE_ETH_EVENT_UNKNOWN;
- event_type < RTE_ETH_EVENT_MAX;
- event_type++) {
- diag = rte_eth_dev_callback_register(pi,
- event_type,
- eth_event_callback,
- NULL);
- if (diag) {
- printf("Failed to setup even callback for event %d\n",
- event_type);
- return -1;
- }
- }
-
/* start port */
if (rte_eth_dev_start(pi) < 0) {
printf("Fail to start port %d\n", pi);
need_check_link_status = 1;
}
+ for (event_type = RTE_ETH_EVENT_UNKNOWN;
+ event_type < RTE_ETH_EVENT_MAX;
+ event_type++) {
+ diag = rte_eth_dev_callback_register(RTE_ETH_ALL,
+ event_type,
+ eth_event_callback,
+ NULL);
+ if (diag) {
+ printf("Failed to setup even callback for event %d\n",
+ event_type);
+ return -1;
+ }
+ }
+
if (need_check_link_status == 1 && !no_link_check)
check_all_ports_link_status(RTE_PORT_ALL);
else if (need_check_link_status == 0)
printf("Done\n");
}
+static int
+eth_dev_event_callback_register(void)
+{
+ int ret;
+
+ /* register the device event callback */
+ ret = rte_dev_event_callback_register(NULL,
+ eth_dev_event_callback, NULL);
+ if (ret) {
+ printf("Failed to register device event callback\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+
+static int
+eth_dev_event_callback_unregister(void)
+{
+ int ret;
+
+ /* unregister the device event callback */
+ ret = rte_dev_event_callback_unregister(NULL,
+ eth_dev_event_callback, NULL);
+ if (ret < 0) {
+ printf("Failed to unregister device event callback\n");
+ return -1;
+ }
+
+ return 0;
+}
+
void
attach_port(char *identifier)
{
pmd_test_exit(void)
{
portid_t pt_id;
+ int ret;
if (test_done == 0)
stop_packet_forwarding();
close_port(pt_id);
}
}
+
+ if (hot_plug) {
+ ret = rte_dev_event_monitor_stop();
+ if (ret)
+ RTE_LOG(ERR, EAL,
+ "fail to stop device event monitor.");
+
+ ret = eth_dev_event_callback_unregister();
+ if (ret)
+ RTE_LOG(ERR, EAL,
+ "fail to unregister all event callbacks.");
+ }
+
printf("\nBye...\n");
}
[RTE_ETH_EVENT_VF_MBOX] = "VF Mbox",
[RTE_ETH_EVENT_MACSEC] = "MACsec",
[RTE_ETH_EVENT_INTR_RMV] = "device removal",
+ [RTE_ETH_EVENT_NEW] = "device probed",
+ [RTE_ETH_EVENT_DESTROY] = "device released",
[RTE_ETH_EVENT_MAX] = NULL,
};
fflush(stdout);
}
+ if (port_id_is_invalid(port_id, DISABLED_WARN))
+ return 0;
+
switch (type) {
case RTE_ETH_EVENT_INTR_RMV:
if (rte_eal_alarm_set(100000,
return 0;
}
+/* This function is used by the interrupt thread */
+static void
+eth_dev_event_callback(char *device_name, enum rte_dev_event_type type,
+ __rte_unused void *arg)
+{
+ if (type >= RTE_DEV_EVENT_MAX) {
+ fprintf(stderr, "%s called upon invalid event %d\n",
+ __func__, type);
+ fflush(stderr);
+ }
+
+ switch (type) {
+ case RTE_DEV_EVENT_REMOVE:
+ RTE_LOG(ERR, EAL, "The device: %s has been removed!\n",
+ device_name);
+ /* TODO: After finish failure handle, begin to stop
+ * packet forward, stop port, close port, detach port.
+ */
+ break;
+ case RTE_DEV_EVENT_ADD:
+ RTE_LOG(ERR, EAL, "The device: %s has been added!\n",
+ device_name);
+ /* TODO: After finish kernel driver binding,
+ * begin to attach port.
+ */
+ break;
+ default:
+ break;
+ }
+}
+
static int
set_tx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port)
{
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
- port->dev_conf.rxmode = rx_mode;
port->dev_conf.fdir_conf = fdir_conf;
if (nb_rxq > 1) {
port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
/* Enter DCB configuration status */
dcb_config = 1;
+ port_conf.rxmode = rte_port->dev_conf.rxmode;
+ port_conf.txmode = rte_port->dev_conf.txmode;
+
/*set configuration of DCB in vt mode and DCB in non-vt mode*/
retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
if (retval < 0)
int
main(int argc, char** argv)
{
- int diag;
+ int diag;
portid_t port_id;
+ int ret;
signal(SIGINT, signal_handler);
signal(SIGTERM, signal_handler);
nb_rxq, nb_txq);
init_config();
+
+ if (hot_plug) {
+ /* enable hot plug monitoring */
+ ret = rte_dev_event_monitor_start();
+ if (ret) {
+ rte_errno = EINVAL;
+ return -1;
+ }
+ eth_dev_event_callback_register();
+
+ }
+
if (start_port(RTE_PORT_ALL) != 0)
rte_exit(EXIT_FAILURE, "Start ports failed\n");
git.droids-corp.org / dpdk.git / blobdiff