#include <rte_log.h>
#include <rte_debug.h>
#include <rte_cycles.h>
-#include <rte_malloc_heap.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_launch.h>
struct gro_status gro_ports[RTE_MAX_ETHPORTS];
uint8_t gro_flush_cycles = GRO_DEFAULT_FLUSH_CYCLES;
-struct vxlan_encap_conf vxlan_encap_conf = {
- .select_ipv4 = 1,
- .select_vlan = 0,
- .select_tos_ttl = 0,
- .vni = "\x00\x00\x00",
- .udp_src = 0,
- .udp_dst = RTE_BE16(4789),
- .ipv4_src = RTE_IPV4(127, 0, 0, 1),
- .ipv4_dst = RTE_IPV4(255, 255, 255, 255),
- .ipv6_src = "\x00\x00\x00\x00\x00\x00\x00\x00"
- "\x00\x00\x00\x00\x00\x00\x00\x01",
- .ipv6_dst = "\x00\x00\x00\x00\x00\x00\x00\x00"
- "\x00\x00\x00\x00\x00\x00\x11\x11",
- .vlan_tci = 0,
- .ip_tos = 0,
- .ip_ttl = 255,
- .eth_src = "\x00\x00\x00\x00\x00\x00",
- .eth_dst = "\xff\xff\xff\xff\xff\xff",
-};
-
-struct nvgre_encap_conf nvgre_encap_conf = {
- .select_ipv4 = 1,
- .select_vlan = 0,
- .tni = "\x00\x00\x00",
- .ipv4_src = RTE_IPV4(127, 0, 0, 1),
- .ipv4_dst = RTE_IPV4(255, 255, 255, 255),
- .ipv6_src = "\x00\x00\x00\x00\x00\x00\x00\x00"
- "\x00\x00\x00\x00\x00\x00\x00\x01",
- .ipv6_dst = "\x00\x00\x00\x00\x00\x00\x00\x00"
- "\x00\x00\x00\x00\x00\x00\x11\x11",
- .vlan_tci = 0,
- .eth_src = "\x00\x00\x00\x00\x00\x00",
- .eth_dst = "\xff\xff\xff\xff\xff\xff",
-};
-
/* Forward function declarations */
static void setup_attached_port(portid_t pi);
static void map_port_queue_stats_mapping_registers(portid_t pi,
RTE_PORT_HANDLING, RTE_PORT_STARTED) == 0)
printf("Port %d can not be set into started\n", pi);
- rte_eth_macaddr_get(pi, &mac_addr);
- printf("Port %d: %02X:%02X:%02X:%02X:%02X:%02X\n", pi,
+ if (eth_macaddr_get_print_err(pi, &mac_addr) == 0)
+ printf("Port %d: %02X:%02X:%02X:%02X:%02X:%02X\n", pi,
mac_addr.addr_bytes[0], mac_addr.addr_bytes[1],
mac_addr.addr_bytes[2], mac_addr.addr_bytes[3],
mac_addr.addr_bytes[4], mac_addr.addr_bytes[5]);
if (port_id_is_invalid(pid, ENABLED_WARN))
return;
+ if ((pid == (portid_t)RTE_PORT_ALL && !all_ports_stopped()) ||
+ (pid != (portid_t)RTE_PORT_ALL && !port_is_stopped(pid))) {
+ printf("Can not reset port(s), please stop port(s) first.\n");
+ return;
+ }
+
printf("Resetting ports...\n");
RTE_ETH_FOREACH_DEV(pi) {
rxtx_port_config(port);
- rte_eth_macaddr_get(pid, &port->eth_addr);
+ ret = eth_macaddr_get_print_err(pid, &port->eth_addr);
+ if (ret != 0)
+ return;
map_port_queue_stats_mapping_registers(pid, port);
#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS
for (i = 0; i < RTE_DIM(vlan_tags); i++)
rx_vft_set(pid, vlan_tags[i], 1);
- rte_eth_macaddr_get(pid, &rte_port->eth_addr);
+ retval = eth_macaddr_get_print_err(pid, &rte_port->eth_addr);
+ if (retval != 0)
+ return retval;
+
map_port_queue_stats_mapping_registers(pid, rte_port);
rte_port->dcb_flag = 1;