struct fwd_lcore **fwd_lcores; /**< For all probed logical cores. */
lcoreid_t nb_lcores; /**< Number of probed logical cores. */
+portid_t ports_ids[RTE_MAX_ETHPORTS]; /**< Store all port ids. */
+
/*
* Test Forwarding Configuration.
* nb_fwd_lcores <= nb_cfg_lcores <= nb_lcores
&tx_only_engine,
&csum_fwd_engine,
&icmp_echo_engine,
-#if defined RTE_LIBRTE_PMD_SOFTNIC && defined RTE_LIBRTE_SCHED
- &softnic_tm_engine,
- &softnic_tm_bypass_engine,
+#if defined RTE_LIBRTE_PMD_SOFTNIC
+ &softnic_fwd_engine,
#endif
#ifdef RTE_LIBRTE_IEEE1588
&ieee1588_fwd_engine,
*/
struct rte_eth_rxmode rx_mode = {
.max_rx_pkt_len = ETHER_MAX_LEN, /**< Default maximum frame length. */
- .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
- .ignore_offload_bitfield = 1,
};
struct rte_eth_txmode tx_mode = {
.pballoc = RTE_FDIR_PBALLOC_64K,
.status = RTE_FDIR_REPORT_STATUS,
.mask = {
- .vlan_tci_mask = 0x0,
+ .vlan_tci_mask = 0xFFEF,
.ipv4_mask = {
.src_ip = 0xFFFFFFFF,
.dst_ip = 0xFFFFFFFF,
struct gro_status gro_ports[RTE_MAX_ETHPORTS];
uint8_t gro_flush_cycles = GRO_DEFAULT_FLUSH_CYCLES;
+struct vxlan_encap_conf vxlan_encap_conf = {
+ .select_ipv4 = 1,
+ .select_vlan = 0,
+ .vni = "\x00\x00\x00",
+ .udp_src = 0,
+ .udp_dst = RTE_BE16(4789),
+ .ipv4_src = IPv4(127, 0, 0, 1),
+ .ipv4_dst = IPv4(255, 255, 255, 255),
+ .ipv6_src = "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x01",
+ .ipv6_dst = "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x11\x11",
+ .vlan_tci = 0,
+ .eth_src = "\x00\x00\x00\x00\x00\x00",
+ .eth_dst = "\xff\xff\xff\xff\xff\xff",
+};
+
+struct nvgre_encap_conf nvgre_encap_conf = {
+ .select_ipv4 = 1,
+ .select_vlan = 0,
+ .tni = "\x00\x00\x00",
+ .ipv4_src = IPv4(127, 0, 0, 1),
+ .ipv4_dst = IPv4(255, 255, 255, 255),
+ .ipv6_src = "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x01",
+ .ipv6_dst = "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x11\x11",
+ .vlan_tci = 0,
+ .eth_src = "\x00\x00\x00\x00\x00\x00",
+ .eth_dst = "\xff\xff\xff\xff\xff\xff",
+};
+
/* Forward function declarations */
static void map_port_queue_stats_mapping_registers(portid_t pi,
struct rte_port *port);
uint8_t port_per_socket[RTE_MAX_NUMA_NODES];
struct rte_gro_param gro_param;
uint32_t gso_types;
+ int k;
memset(port_per_socket,0,RTE_MAX_NUMA_NODES);
port->dev_conf.txmode = tx_mode;
port->dev_conf.rxmode = rx_mode;
rte_eth_dev_info_get(pid, &port->dev_info);
+
if (!(port->dev_info.tx_offload_capa &
DEV_TX_OFFLOAD_MBUF_FAST_FREE))
port->dev_conf.txmode.offloads &=
}
}
+ /* Apply Rx offloads configuration */
+ for (k = 0; k < port->dev_info.max_rx_queues; k++)
+ port->rx_conf[k].offloads =
+ port->dev_conf.rxmode.offloads;
+ /* Apply Tx offloads configuration */
+ for (k = 0; k < port->dev_info.max_tx_queues; k++)
+ port->tx_conf[k].offloads =
+ port->dev_conf.txmode.offloads;
+
/* set flag to initialize port/queue */
port->need_reconfig = 1;
port->need_reconfig_queues = 1;
init_port_config();
gso_types = DEV_TX_OFFLOAD_TCP_TSO | DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
- DEV_TX_OFFLOAD_GRE_TNL_TSO;
+ DEV_TX_OFFLOAD_GRE_TNL_TSO | DEV_TX_OFFLOAD_UDP_TSO;
/*
* Records which Mbuf pool to use by each logical core, if needed.
*/
"rte_gro_ctx_create() failed\n");
}
}
+
+#if defined RTE_LIBRTE_PMD_SOFTNIC
+ if (strcmp(cur_fwd_eng->fwd_mode_name, "softnic") == 0) {
+ RTE_ETH_FOREACH_DEV(pid) {
+ port = &ports[pid];
+ const char *driver = port->dev_info.driver_name;
+
+ if (strcmp(driver, "net_softnic") == 0)
+ port->softport.fwd_lcore_arg = fwd_lcores;
+ }
+ }
+#endif
+
}
pktnb_stats[1] = pktnb_stats[0];
burst_stats[0] = nb_burst;
pktnb_stats[0] = nb_pkt;
+ } else if (nb_burst > burst_stats[1]) {
+ burst_stats[1] = nb_burst;
+ pktnb_stats[1] = nb_pkt;
}
}
if (total_burst == 0)
uint64_t tics_per_1sec;
uint64_t tics_datum;
uint64_t tics_current;
- uint16_t idx_port;
+ uint16_t i, cnt_ports;
+ cnt_ports = nb_ports;
tics_datum = rte_rdtsc();
tics_per_1sec = rte_get_timer_hz();
#endif
tics_current = rte_rdtsc();
if (tics_current - tics_datum >= tics_per_1sec) {
/* Periodic bitrate calculation */
- RTE_ETH_FOREACH_DEV(idx_port)
+ for (i = 0; i < cnt_ports; i++)
rte_stats_bitrate_calc(bitrate_data,
- idx_port);
+ ports_ids[i]);
tics_datum = tics_current;
}
}
port->need_reconfig_queues = 0;
/* setup tx queues */
for (qi = 0; qi < nb_txq; qi++) {
- port->tx_conf[qi].txq_flags =
- ETH_TXQ_FLAGS_IGNORE;
- /* Apply Tx offloads configuration */
- port->tx_conf[qi].offloads =
- port->dev_conf.txmode.offloads;
if ((numa_support) &&
(txring_numa[pi] != NUMA_NO_CONFIG))
diag = rte_eth_tx_queue_setup(pi, qi,
return -1;
}
for (qi = 0; qi < nb_rxq; qi++) {
- /* Apply Rx offloads configuration */
- port->rx_conf[qi].offloads =
- port->dev_conf.rxmode.offloads;
/* setup rx queues */
if ((numa_support) &&
(rxring_numa[pi] != NUMA_NO_CONFIG)) {
}
diag = rte_eth_rx_queue_setup(pi, qi,
- port->nb_rx_desc[pi],
+ port->nb_rx_desc[qi],
rxring_numa[pi],
&(port->rx_conf[qi]),
mp);
return -1;
}
diag = rte_eth_rx_queue_setup(pi, qi,
- port->nb_rx_desc[pi],
+ port->nb_rx_desc[qi],
port->socket_id,
&(port->rx_conf[qi]),
mp);
reconfig(pi, socket_id);
rte_eth_promiscuous_enable(pi);
+ ports_ids[nb_ports] = pi;
nb_ports = rte_eth_dev_count_avail();
ports[pi].port_status = RTE_PORT_STOPPED;
detach_port(portid_t port_id)
{
char name[RTE_ETH_NAME_MAX_LEN];
+ uint16_t i;
printf("Detaching a port...\n");
port_flow_flush(port_id);
if (rte_eth_dev_detach(port_id, name)) {
- TESTPMD_LOG(ERR, "Failed to detach port '%s'\n", name);
+ TESTPMD_LOG(ERR, "Failed to detach port %u\n", port_id);
return;
}
+ for (i = 0; i < nb_ports; i++) {
+ if (ports_ids[i] == port_id) {
+ ports_ids[i] = ports_ids[nb_ports-1];
+ ports_ids[nb_ports-1] = 0;
+ break;
+ }
+ }
nb_ports = rte_eth_dev_count_avail();
update_fwd_ports(RTE_MAX_ETHPORTS);
- printf("Port '%s' is detached. Now total ports is %d\n",
- name, nb_ports);
+ printf("Port %u is detached. Now total ports is %d\n",
+ port_id, nb_ports);
printf("Done\n");
return;
}
void
pmd_test_exit(void)
{
+ struct rte_device *device;
portid_t pt_id;
int ret;
fflush(stdout);
stop_port(pt_id);
close_port(pt_id);
+
+ /*
+ * This is a workaround to fix a virtio-user issue that
+ * requires to call clean-up routine to remove existing
+ * socket.
+ * This workaround valid only for testpmd, needs a fix
+ * valid for all applications.
+ * TODO: Implement proper resource cleanup
+ */
+ device = rte_eth_devices[pt_id].device;
+ if (device && !strcmp(device->driver->name, "net_virtio_user"))
+ detach_port(pt_id);
}
}
static void
rmv_event_callback(void *arg)
{
- struct rte_eth_dev *dev;
+ int need_to_start = 0;
+ int org_no_link_check = no_link_check;
portid_t port_id = (intptr_t)arg;
RTE_ETH_VALID_PORTID_OR_RET(port_id);
- dev = &rte_eth_devices[port_id];
+ if (!test_done && port_is_forwarding(port_id)) {
+ need_to_start = 1;
+ stop_packet_forwarding();
+ }
+ no_link_check = 1;
stop_port(port_id);
+ no_link_check = org_no_link_check;
close_port(port_id);
- printf("removing device %s\n", dev->device->name);
- if (rte_eal_dev_detach(dev->device))
- TESTPMD_LOG(ERR, "Failed to detach device %s\n",
- dev->device->name);
+ detach_port(port_id);
+ if (need_to_start)
+ start_packet_forwarding(0);
}
/* This function is used by the interrupt thread */
{
portid_t pid;
struct rte_port *port;
- struct rte_eth_dev_info dev_info;
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
port->dev_conf.fdir_conf = fdir_conf;
+ rte_eth_dev_info_get(pid, &port->dev_info);
if (nb_rxq > 1) {
- rte_eth_dev_info_get(pid, &dev_info);
port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
port->dev_conf.rx_adv_conf.rss_conf.rss_hf =
- rss_hf & dev_info.flow_type_rss_offloads;
+ rss_hf & port->dev_info.flow_type_rss_offloads;
} else {
port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
port->dev_conf.rx_adv_conf.rss_conf.rss_hf = 0;
(rte_eth_devices[pid].data->dev_flags &
RTE_ETH_DEV_INTR_RMV))
port->dev_conf.intr_conf.rmv = 1;
-
-#if defined RTE_LIBRTE_PMD_SOFTNIC && defined RTE_LIBRTE_SCHED
- /* Detect softnic port */
- if (!strcmp(port->dev_info.driver_name, "net_softnic")) {
- port->softnic_enable = 1;
- memset(&port->softport, 0, sizeof(struct softnic_port));
-
- if (!strcmp(cur_fwd_eng->fwd_mode_name, "tm"))
- port->softport.tm_flag = 1;
- }
-#endif
}
}
};
static int
-get_eth_dcb_conf(struct rte_eth_conf *eth_conf,
+get_eth_dcb_conf(portid_t pid, struct rte_eth_conf *eth_conf,
enum dcb_mode_enable dcb_mode,
enum rte_eth_nb_tcs num_tcs,
uint8_t pfc_en)
{
uint8_t i;
+ int32_t rc;
+ struct rte_eth_rss_conf rss_conf;
/*
* Builds up the correct configuration for dcb+vt based on the vlan tags array
struct rte_eth_dcb_tx_conf *tx_conf =
ð_conf->tx_adv_conf.dcb_tx_conf;
+ rc = rte_eth_dev_rss_hash_conf_get(pid, &rss_conf);
+ if (rc != 0)
+ return rc;
+
rx_conf->nb_tcs = num_tcs;
tx_conf->nb_tcs = num_tcs;
rx_conf->dcb_tc[i] = i % num_tcs;
tx_conf->dcb_tc[i] = i % num_tcs;
}
+
eth_conf->rxmode.mq_mode = ETH_MQ_RX_DCB_RSS;
- eth_conf->rx_adv_conf.rss_conf.rss_hf = rss_hf;
+ eth_conf->rx_adv_conf.rss_conf = rss_conf;
eth_conf->txmode.mq_mode = ETH_MQ_TX_DCB;
}
port_conf.txmode = rte_port->dev_conf.txmode;
/*set configuration of DCB in vt mode and DCB in non-vt mode*/
- retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
+ retval = get_eth_dcb_conf(pid, &port_conf, dcb_mode, num_tcs, pfc_en);
if (retval < 0)
return retval;
port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
- /**
- * Write the configuration into the device.
- * Set the numbers of RX & TX queues to 0, so
- * the RX & TX queues will not be setup.
- */
- rte_eth_dev_configure(pid, 0, 0, &port_conf);
+ /* re-configure the device . */
+ rte_eth_dev_configure(pid, nb_rxq, nb_rxq, &port_conf);
rte_eth_dev_info_get(pid, &rte_port->dev_info);
{
int diag;
portid_t port_id;
+ uint16_t count;
int ret;
signal(SIGINT, signal_handler);
rte_panic("Cannot register log type");
rte_log_set_level(testpmd_logtype, RTE_LOG_DEBUG);
+#ifdef RTE_LIBRTE_PDUMP
+ /* initialize packet capture framework */
+ rte_pdump_init(NULL);
+#endif
+
+ count = 0;
+ RTE_ETH_FOREACH_DEV(port_id) {
+ ports_ids[count] = port_id;
+ count++;
+ }
+ nb_ports = (portid_t) count;
+ if (nb_ports == 0)
+ TESTPMD_LOG(WARNING, "No probed ethernet devices\n");
+
+ /* allocate port structures, and init them */
+ init_port();
+
+ set_def_fwd_config();
+ if (nb_lcores == 0)
+ rte_panic("Empty set of forwarding logical cores - check the "
+ "core mask supplied in the command parameters\n");
+
/* Bitrate/latency stats disabled by default */
#ifdef RTE_LIBRTE_BITRATE
bitrate_enabled = 0;
strerror(errno));
}
-#ifdef RTE_LIBRTE_PDUMP
- /* initialize packet capture framework */
- rte_pdump_init(NULL);
-#endif
-
- nb_ports = (portid_t) rte_eth_dev_count_avail();
- if (nb_ports == 0)
- TESTPMD_LOG(WARNING, "No probed ethernet devices\n");
-
- /* allocate port structures, and init them */
- init_port();
-
- set_def_fwd_config();
- if (nb_lcores == 0)
- rte_panic("Empty set of forwarding logical cores - check the "
- "core mask supplied in the command parameters\n");
-
if (tx_first && interactive)
rte_exit(EXIT_FAILURE, "--tx-first cannot be used on "
"interactive mode.\n");
git.droids-corp.org / dpdk.git / blobdiff