-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2017 Intel Corporation
*/
#include <stdarg.h>
#include <string.h>
#include <time.h>
#include <fcntl.h>
+#include <sys/mman.h>
#include <sys/types.h>
#include <errno.h>
+#include <stdbool.h>
#include <sys/queue.h>
#include <sys/stat.h>
#include <rte_cycles.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
-#include <rte_memzone.h>
#include <rte_launch.h>
#include <rte_eal.h>
+#include <rte_alarm.h>
#include <rte_per_lcore.h>
#include <rte_lcore.h>
#include <rte_atomic.h>
#include <rte_mempool.h>
#include <rte_malloc.h>
#include <rte_mbuf.h>
+#include <rte_mbuf_pool_ops.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_dev.h>
#include <rte_string_fns.h>
-#ifdef RTE_LIBRTE_PMD_XENVIRT
-#include <rte_eth_xenvirt.h>
+#ifdef RTE_NET_IXGBE
+#include <rte_pmd_ixgbe.h>
#endif
-#ifdef RTE_LIBRTE_PDUMP
+#ifdef RTE_LIB_PDUMP
#include <rte_pdump.h>
#endif
#include <rte_flow.h>
#include <rte_metrics.h>
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIB_BITRATESTATS
#include <rte_bitrate.h>
#endif
-#include <rte_metrics.h>
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
#include <rte_latencystats.h>
#endif
#include "testpmd.h"
+#ifndef MAP_HUGETLB
+/* FreeBSD may not have MAP_HUGETLB (in fact, it probably doesn't) */
+#define HUGE_FLAG (0x40000)
+#else
+#define HUGE_FLAG MAP_HUGETLB
+#endif
+
+#ifndef MAP_HUGE_SHIFT
+/* older kernels (or FreeBSD) will not have this define */
+#define HUGE_SHIFT (26)
+#else
+#define HUGE_SHIFT MAP_HUGE_SHIFT
+#endif
+
+#define EXTMEM_HEAP_NAME "extmem"
+#define EXTBUF_ZONE_SIZE RTE_PGSIZE_2M
+
uint16_t verbose_level = 0; /**< Silent by default. */
+int testpmd_logtype; /**< Log type for testpmd logs */
-/* use master core for command line ? */
+/* use main core for command line ? */
uint8_t interactive = 0;
uint8_t auto_start = 0;
+uint8_t tx_first;
+char cmdline_filename[PATH_MAX] = {0};
/*
* NUMA support configuration.
* probed ports among the CPU sockets 0 and 1.
* Otherwise, all memory is allocated from CPU socket 0.
*/
-uint8_t numa_support = 0; /**< No numa support by default */
+uint8_t numa_support = 1; /**< numa enabled by default */
/*
* In UMA mode,all memory is allocated from socket 0 if --socket-num is
uint8_t socket_num = UMA_NO_CONFIG;
/*
- * Use ANONYMOUS mapped memory (might be not physically continuous) for mbufs.
+ * Select mempool allocation type:
+ * - native: use regular DPDK memory
+ * - anon: use regular DPDK memory to create mempool, but populate using
+ * anonymous memory (may not be IOVA-contiguous)
+ * - xmem: use externally allocated hugepage memory
+ */
+uint8_t mp_alloc_type = MP_ALLOC_NATIVE;
+
+/*
+ * Store specified sockets on which memory pool to be used by ports
+ * is allocated.
+ */
+uint8_t port_numa[RTE_MAX_ETHPORTS];
+
+/*
+ * Store specified sockets on which RX ring to be used by ports
+ * is allocated.
+ */
+uint8_t rxring_numa[RTE_MAX_ETHPORTS];
+
+/*
+ * Store specified sockets on which TX ring to be used by ports
+ * is allocated.
*/
-uint8_t mp_anon = 0;
+uint8_t txring_numa[RTE_MAX_ETHPORTS];
/*
* Record the Ethernet address of peer target ports to which packets are
* Must be instantiated with the ethernet addresses of peer traffic generator
* ports.
*/
-struct ether_addr peer_eth_addrs[RTE_MAX_ETHPORTS];
+struct rte_ether_addr peer_eth_addrs[RTE_MAX_ETHPORTS];
portid_t nb_peer_eth_addrs = 0;
/*
struct fwd_lcore **fwd_lcores; /**< For all probed logical cores. */
lcoreid_t nb_lcores; /**< Number of probed logical cores. */
+portid_t ports_ids[RTE_MAX_ETHPORTS]; /**< Store all port ids. */
+
/*
* Test Forwarding Configuration.
* nb_fwd_lcores <= nb_cfg_lcores <= nb_lcores
&tx_only_engine,
&csum_fwd_engine,
&icmp_echo_engine,
+ &noisy_vnf_engine,
+ &five_tuple_swap_fwd_engine,
#ifdef RTE_LIBRTE_IEEE1588
&ieee1588_fwd_engine,
#endif
NULL,
};
+struct rte_mempool *mempools[RTE_MAX_NUMA_NODES * MAX_SEGS_BUFFER_SPLIT];
+uint16_t mempool_flags;
+
struct fwd_config cur_fwd_config;
struct fwd_engine *cur_fwd_eng = &io_fwd_engine; /**< IO mode by default. */
uint32_t retry_enabled;
uint32_t burst_tx_delay_time = BURST_TX_WAIT_US;
uint32_t burst_tx_retry_num = BURST_TX_RETRIES;
-uint16_t mbuf_data_size = DEFAULT_MBUF_DATA_SIZE; /**< Mbuf data space size. */
+uint32_t mbuf_data_size_n = 1; /* Number of specified mbuf sizes. */
+uint16_t mbuf_data_size[MAX_SEGS_BUFFER_SPLIT] = {
+ DEFAULT_MBUF_DATA_SIZE
+}; /**< Mbuf data space size. */
uint32_t param_total_num_mbufs = 0; /**< number of mbufs in all pools - if
* specified on command-line. */
+uint16_t stats_period; /**< Period to show statistics (disabled by default) */
+
+/*
+ * In container, it cannot terminate the process which running with 'stats-period'
+ * option. Set flag to exit stats period loop after received SIGINT/SIGTERM.
+ */
+uint8_t f_quit;
+
+/*
+ * Configuration of packet segments used to scatter received packets
+ * if some of split features is configured.
+ */
+uint16_t rx_pkt_seg_lengths[MAX_SEGS_BUFFER_SPLIT];
+uint8_t rx_pkt_nb_segs; /**< Number of segments to split */
+uint16_t rx_pkt_seg_offsets[MAX_SEGS_BUFFER_SPLIT];
+uint8_t rx_pkt_nb_offs; /**< Number of specified offsets */
/*
* Configuration of packet segments used by the "txonly" processing engine.
enum tx_pkt_split tx_pkt_split = TX_PKT_SPLIT_OFF;
/**< Split policy for packets to TX. */
+uint8_t txonly_multi_flow;
+/**< Whether multiple flows are generated in TXONLY mode. */
+
+uint32_t tx_pkt_times_inter;
+/**< Timings for send scheduling in TXONLY mode, time between bursts. */
+
+uint32_t tx_pkt_times_intra;
+/**< Timings for send scheduling in TXONLY mode, time between packets. */
+
uint16_t nb_pkt_per_burst = DEF_PKT_BURST; /**< Number of packets per burst. */
+uint16_t nb_pkt_flowgen_clones; /**< Number of Tx packet clones to send in flowgen mode. */
uint16_t mb_mempool_cache = DEF_MBUF_CACHE; /**< Size of mbuf mempool cache. */
/* current configuration is in DCB or not,0 means it is not in DCB mode */
/*
* Configurable number of RX/TX queues.
*/
+queueid_t nb_hairpinq; /**< Number of hairpin queues per port. */
queueid_t nb_rxq = 1; /**< Number of RX queues per port. */
queueid_t nb_txq = 1; /**< Number of TX queues per port. */
/*
* Configurable number of RX/TX ring descriptors.
+ * Defaults are supplied by drivers via ethdev.
*/
-#define RTE_TEST_RX_DESC_DEFAULT 128
-#define RTE_TEST_TX_DESC_DEFAULT 512
+#define RTE_TEST_RX_DESC_DEFAULT 0
+#define RTE_TEST_TX_DESC_DEFAULT 0
uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT; /**< Number of RX descriptors. */
uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT; /**< Number of TX descriptors. */
int16_t tx_rs_thresh = RTE_PMD_PARAM_UNSET;
/*
- * Configurable value of TX queue flags.
+ * Configurable value of buffered packets before sending.
*/
-int32_t txq_flags = RTE_PMD_PARAM_UNSET;
+uint16_t noisy_tx_sw_bufsz;
+
+/*
+ * Configurable value of packet buffer timeout.
+ */
+uint16_t noisy_tx_sw_buf_flush_time;
+
+/*
+ * Configurable value for size of VNF internal memory area
+ * used for simulating noisy neighbour behaviour
+ */
+uint64_t noisy_lkup_mem_sz;
+
+/*
+ * Configurable value of number of random writes done in
+ * VNF simulation memory area.
+ */
+uint64_t noisy_lkup_num_writes;
+
+/*
+ * Configurable value of number of random reads done in
+ * VNF simulation memory area.
+ */
+uint64_t noisy_lkup_num_reads;
+
+/*
+ * Configurable value of number of random reads/writes done in
+ * VNF simulation memory area.
+ */
+uint64_t noisy_lkup_num_reads_writes;
/*
* Receive Side Scaling (RSS) configuration.
*/
uint8_t no_flush_rx = 0; /* flush by default */
+/*
+ * Flow API isolated mode.
+ */
+uint8_t flow_isolate_all;
+
/*
* Avoids to check link status when starting/stopping a port.
*/
uint8_t no_link_check = 0; /* check by default */
+/*
+ * Don't automatically start all ports in interactive mode.
+ */
+uint8_t no_device_start = 0;
+
+/*
+ * Enable link status change notification
+ */
+uint8_t lsc_interrupt = 1; /* enabled by default */
+
+/*
+ * Enable device removal notification.
+ */
+uint8_t rmv_interrupt = 1; /* enabled by default */
+
+uint8_t hot_plug = 0; /**< hotplug disabled by default. */
+
+/* After attach, port setup is called on event or by iterator */
+bool setup_on_probe_event = true;
+
+/* Clear ptypes on port initialization. */
+uint8_t clear_ptypes = true;
+
+/* Hairpin ports configuration mode. */
+uint16_t hairpin_mode;
+
+/* Pretty printing of ethdev events */
+static const char * const eth_event_desc[] = {
+ [RTE_ETH_EVENT_UNKNOWN] = "unknown",
+ [RTE_ETH_EVENT_INTR_LSC] = "link state change",
+ [RTE_ETH_EVENT_QUEUE_STATE] = "queue state",
+ [RTE_ETH_EVENT_INTR_RESET] = "reset",
+ [RTE_ETH_EVENT_VF_MBOX] = "VF mbox",
+ [RTE_ETH_EVENT_IPSEC] = "IPsec",
+ [RTE_ETH_EVENT_MACSEC] = "MACsec",
+ [RTE_ETH_EVENT_INTR_RMV] = "device removal",
+ [RTE_ETH_EVENT_NEW] = "device probed",
+ [RTE_ETH_EVENT_DESTROY] = "device released",
+ [RTE_ETH_EVENT_FLOW_AGED] = "flow aged",
+ [RTE_ETH_EVENT_MAX] = NULL,
+};
+
+/*
+ * Display or mask ether events
+ * Default to all events except VF_MBOX
+ */
+uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) |
+ (UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC) |
+ (UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE) |
+ (UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) |
+ (UINT32_C(1) << RTE_ETH_EVENT_IPSEC) |
+ (UINT32_C(1) << RTE_ETH_EVENT_MACSEC) |
+ (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV) |
+ (UINT32_C(1) << RTE_ETH_EVENT_FLOW_AGED);
+/*
+ * Decide if all memory are locked for performance.
+ */
+int do_mlockall = 0;
+
/*
* NIC bypass mode configuration options.
*/
-#ifdef RTE_NIC_BYPASS
+#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS
/* The NIC bypass watchdog timeout. */
-uint32_t bypass_timeout = RTE_BYPASS_TMT_OFF;
-
+uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
#endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+
+#ifdef RTE_LIB_LATENCYSTATS
/*
* Set when latency stats is enabled in the commandline
* Ethernet device configuration.
*/
struct rte_eth_rxmode rx_mode = {
- .max_rx_pkt_len = ETHER_MAX_LEN, /**< Default maximum frame length. */
- .split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled. */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled. */
- .hw_vlan_filter = 1, /**< VLAN filtering enabled. */
- .hw_vlan_strip = 1, /**< VLAN strip enabled. */
- .hw_vlan_extend = 0, /**< Extended VLAN disabled. */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled. */
- .hw_strip_crc = 0, /**< CRC stripping by hardware disabled. */
+ /* Default maximum frame length.
+ * Zero is converted to "RTE_ETHER_MTU + PMD Ethernet overhead"
+ * in init_config().
+ */
+ .max_rx_pkt_len = 0,
+};
+
+struct rte_eth_txmode tx_mode = {
+ .offloads = DEV_TX_OFFLOAD_MBUF_FAST_FREE,
};
struct rte_fdir_conf fdir_conf = {
.pballoc = RTE_FDIR_PBALLOC_64K,
.status = RTE_FDIR_REPORT_STATUS,
.mask = {
- .vlan_tci_mask = 0x0,
+ .vlan_tci_mask = 0xFFEF,
.ipv4_mask = {
.src_ip = 0xFFFFFFFF,
.dst_ip = 0xFFFFFFFF,
volatile int test_done = 1; /* stop packet forwarding when set to 1. */
-struct queue_stats_mappings tx_queue_stats_mappings_array[MAX_TX_QUEUE_STATS_MAPPINGS];
-struct queue_stats_mappings rx_queue_stats_mappings_array[MAX_RX_QUEUE_STATS_MAPPINGS];
+/*
+ * Display zero values by default for xstats
+ */
+uint8_t xstats_hide_zero;
-struct queue_stats_mappings *tx_queue_stats_mappings = tx_queue_stats_mappings_array;
-struct queue_stats_mappings *rx_queue_stats_mappings = rx_queue_stats_mappings_array;
+/*
+ * Measure of CPU cycles disabled by default
+ */
+uint8_t record_core_cycles;
-uint16_t nb_tx_queue_stats_mappings = 0;
-uint16_t nb_rx_queue_stats_mappings = 0;
+/*
+ * Display of RX and TX bursts disabled by default
+ */
+uint8_t record_burst_stats;
-unsigned max_socket = 0;
+unsigned int num_sockets = 0;
+unsigned int socket_ids[RTE_MAX_NUMA_NODES];
+#ifdef RTE_LIB_BITRATESTATS
/* Bitrate statistics */
struct rte_stats_bitrates *bitrate_data;
+lcoreid_t bitrate_lcore_id;
+uint8_t bitrate_enabled;
+#endif
+
+struct gro_status gro_ports[RTE_MAX_ETHPORTS];
+uint8_t gro_flush_cycles = GRO_DEFAULT_FLUSH_CYCLES;
+
+/*
+ * hexadecimal bitmask of RX mq mode can be enabled.
+ */
+enum rte_eth_rx_mq_mode rx_mq_mode = ETH_MQ_RX_VMDQ_DCB_RSS;
+
+/*
+ * Used to set forced link speed
+ */
+uint32_t eth_link_speed;
/* Forward function declarations */
-static void map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port);
+static void setup_attached_port(portid_t pi);
static void check_all_ports_link_status(uint32_t port_mask);
+static int eth_event_callback(portid_t port_id,
+ enum rte_eth_event_type type,
+ void *param, void *ret_param);
+static void dev_event_callback(const char *device_name,
+ enum rte_dev_event_type type,
+ void *param);
/*
* Check if all the ports are started.
*/
static int all_ports_started(void);
+struct gso_status gso_ports[RTE_MAX_ETHPORTS];
+uint16_t gso_max_segment_size = RTE_ETHER_MAX_LEN - RTE_ETHER_CRC_LEN;
+
+/* Holds the registered mbuf dynamic flags names. */
+char dynf_names[64][RTE_MBUF_DYN_NAMESIZE];
+
/*
- * Find next enabled port
+ * Helper function to check if socket is already discovered.
+ * If yes, return positive value. If not, return zero.
*/
-portid_t
-find_next_port(portid_t p, struct rte_port *ports, int size)
+int
+new_socket_id(unsigned int socket_id)
{
- if (ports == NULL)
- rte_exit(-EINVAL, "failed to find a next port id\n");
+ unsigned int i;
- while ((p < size) && (ports[p].enabled == 0))
- p++;
- return p;
+ for (i = 0; i < num_sockets; i++) {
+ if (socket_ids[i] == socket_id)
+ return 0;
+ }
+ return 1;
}
/*
nb_lc = 0;
for (i = 0; i < RTE_MAX_LCORE; i++) {
- sock_num = rte_lcore_to_socket_id(i) + 1;
- if (sock_num > max_socket) {
- if (sock_num > RTE_MAX_NUMA_NODES)
- rte_exit(EXIT_FAILURE, "Total sockets greater than %u\n", RTE_MAX_NUMA_NODES);
- max_socket = sock_num;
- }
if (!rte_lcore_is_enabled(i))
continue;
- if (i == rte_get_master_lcore())
+ sock_num = rte_lcore_to_socket_id(i);
+ if (new_socket_id(sock_num)) {
+ if (num_sockets >= RTE_MAX_NUMA_NODES) {
+ rte_exit(EXIT_FAILURE,
+ "Total sockets greater than %u\n",
+ RTE_MAX_NUMA_NODES);
+ }
+ socket_ids[num_sockets++] = sock_num;
+ }
+ if (i == rte_get_main_lcore())
continue;
fwd_lcores_cpuids[nb_lc++] = i;
}
portid_t i;
for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
- peer_eth_addrs[i].addr_bytes[0] = ETHER_LOCAL_ADMIN_ADDR;
+ peer_eth_addrs[i].addr_bytes[0] = RTE_ETHER_LOCAL_ADMIN_ADDR;
peer_eth_addrs[i].addr_bytes[5] = i;
}
}
set_default_fwd_ports_config(void)
{
portid_t pt_id;
-
- for (pt_id = 0; pt_id < nb_ports; pt_id++)
- fwd_ports_ids[pt_id] = pt_id;
+ int i = 0;
+
+ RTE_ETH_FOREACH_DEV(pt_id) {
+ fwd_ports_ids[i++] = pt_id;
+
+ /* Update sockets info according to the attached device */
+ int socket_id = rte_eth_dev_socket_id(pt_id);
+ if (socket_id >= 0 && new_socket_id(socket_id)) {
+ if (num_sockets >= RTE_MAX_NUMA_NODES) {
+ rte_exit(EXIT_FAILURE,
+ "Total sockets greater than %u\n",
+ RTE_MAX_NUMA_NODES);
+ }
+ socket_ids[num_sockets++] = socket_id;
+ }
+ }
nb_cfg_ports = nb_ports;
nb_fwd_ports = nb_ports;
set_default_fwd_ports_config();
}
+/* extremely pessimistic estimation of memory required to create a mempool */
+static int
+calc_mem_size(uint32_t nb_mbufs, uint32_t mbuf_sz, size_t pgsz, size_t *out)
+{
+ unsigned int n_pages, mbuf_per_pg, leftover;
+ uint64_t total_mem, mbuf_mem, obj_sz;
+
+ /* there is no good way to predict how much space the mempool will
+ * occupy because it will allocate chunks on the fly, and some of those
+ * will come from default DPDK memory while some will come from our
+ * external memory, so just assume 128MB will be enough for everyone.
+ */
+ uint64_t hdr_mem = 128 << 20;
+
+ /* account for possible non-contiguousness */
+ obj_sz = rte_mempool_calc_obj_size(mbuf_sz, 0, NULL);
+ if (obj_sz > pgsz) {
+ TESTPMD_LOG(ERR, "Object size is bigger than page size\n");
+ return -1;
+ }
+
+ mbuf_per_pg = pgsz / obj_sz;
+ leftover = (nb_mbufs % mbuf_per_pg) > 0;
+ n_pages = (nb_mbufs / mbuf_per_pg) + leftover;
+
+ mbuf_mem = n_pages * pgsz;
+
+ total_mem = RTE_ALIGN(hdr_mem + mbuf_mem, pgsz);
+
+ if (total_mem > SIZE_MAX) {
+ TESTPMD_LOG(ERR, "Memory size too big\n");
+ return -1;
+ }
+ *out = (size_t)total_mem;
+
+ return 0;
+}
+
+static int
+pagesz_flags(uint64_t page_sz)
+{
+ /* as per mmap() manpage, all page sizes are log2 of page size
+ * shifted by MAP_HUGE_SHIFT
+ */
+ int log2 = rte_log2_u64(page_sz);
+
+ return (log2 << HUGE_SHIFT);
+}
+
+static void *
+alloc_mem(size_t memsz, size_t pgsz, bool huge)
+{
+ void *addr;
+ int flags;
+
+ /* allocate anonymous hugepages */
+ flags = MAP_ANONYMOUS | MAP_PRIVATE;
+ if (huge)
+ flags |= HUGE_FLAG | pagesz_flags(pgsz);
+
+ addr = mmap(NULL, memsz, PROT_READ | PROT_WRITE, flags, -1, 0);
+ if (addr == MAP_FAILED)
+ return NULL;
+
+ return addr;
+}
+
+struct extmem_param {
+ void *addr;
+ size_t len;
+ size_t pgsz;
+ rte_iova_t *iova_table;
+ unsigned int iova_table_len;
+};
+
+static int
+create_extmem(uint32_t nb_mbufs, uint32_t mbuf_sz, struct extmem_param *param,
+ bool huge)
+{
+ uint64_t pgsizes[] = {RTE_PGSIZE_2M, RTE_PGSIZE_1G, /* x86_64, ARM */
+ RTE_PGSIZE_16M, RTE_PGSIZE_16G}; /* POWER */
+ unsigned int cur_page, n_pages, pgsz_idx;
+ size_t mem_sz, cur_pgsz;
+ rte_iova_t *iovas = NULL;
+ void *addr;
+ int ret;
+
+ for (pgsz_idx = 0; pgsz_idx < RTE_DIM(pgsizes); pgsz_idx++) {
+ /* skip anything that is too big */
+ if (pgsizes[pgsz_idx] > SIZE_MAX)
+ continue;
+
+ cur_pgsz = pgsizes[pgsz_idx];
+
+ /* if we were told not to allocate hugepages, override */
+ if (!huge)
+ cur_pgsz = sysconf(_SC_PAGESIZE);
+
+ ret = calc_mem_size(nb_mbufs, mbuf_sz, cur_pgsz, &mem_sz);
+ if (ret < 0) {
+ TESTPMD_LOG(ERR, "Cannot calculate memory size\n");
+ return -1;
+ }
+
+ /* allocate our memory */
+ addr = alloc_mem(mem_sz, cur_pgsz, huge);
+
+ /* if we couldn't allocate memory with a specified page size,
+ * that doesn't mean we can't do it with other page sizes, so
+ * try another one.
+ */
+ if (addr == NULL)
+ continue;
+
+ /* store IOVA addresses for every page in this memory area */
+ n_pages = mem_sz / cur_pgsz;
+
+ iovas = malloc(sizeof(*iovas) * n_pages);
+
+ if (iovas == NULL) {
+ TESTPMD_LOG(ERR, "Cannot allocate memory for iova addresses\n");
+ goto fail;
+ }
+ /* lock memory if it's not huge pages */
+ if (!huge)
+ mlock(addr, mem_sz);
+
+ /* populate IOVA addresses */
+ for (cur_page = 0; cur_page < n_pages; cur_page++) {
+ rte_iova_t iova;
+ size_t offset;
+ void *cur;
+
+ offset = cur_pgsz * cur_page;
+ cur = RTE_PTR_ADD(addr, offset);
+
+ /* touch the page before getting its IOVA */
+ *(volatile char *)cur = 0;
+
+ iova = rte_mem_virt2iova(cur);
+
+ iovas[cur_page] = iova;
+ }
+
+ break;
+ }
+ /* if we couldn't allocate anything */
+ if (iovas == NULL)
+ return -1;
+
+ param->addr = addr;
+ param->len = mem_sz;
+ param->pgsz = cur_pgsz;
+ param->iova_table = iovas;
+ param->iova_table_len = n_pages;
+
+ return 0;
+fail:
+ if (iovas)
+ free(iovas);
+ if (addr)
+ munmap(addr, mem_sz);
+
+ return -1;
+}
+
+static int
+setup_extmem(uint32_t nb_mbufs, uint32_t mbuf_sz, bool huge)
+{
+ struct extmem_param param;
+ int socket_id, ret;
+
+ memset(¶m, 0, sizeof(param));
+
+ /* check if our heap exists */
+ socket_id = rte_malloc_heap_get_socket(EXTMEM_HEAP_NAME);
+ if (socket_id < 0) {
+ /* create our heap */
+ ret = rte_malloc_heap_create(EXTMEM_HEAP_NAME);
+ if (ret < 0) {
+ TESTPMD_LOG(ERR, "Cannot create heap\n");
+ return -1;
+ }
+ }
+
+ ret = create_extmem(nb_mbufs, mbuf_sz, ¶m, huge);
+ if (ret < 0) {
+ TESTPMD_LOG(ERR, "Cannot create memory area\n");
+ return -1;
+ }
+
+ /* we now have a valid memory area, so add it to heap */
+ ret = rte_malloc_heap_memory_add(EXTMEM_HEAP_NAME,
+ param.addr, param.len, param.iova_table,
+ param.iova_table_len, param.pgsz);
+
+ /* when using VFIO, memory is automatically mapped for DMA by EAL */
+
+ /* not needed any more */
+ free(param.iova_table);
+
+ if (ret < 0) {
+ TESTPMD_LOG(ERR, "Cannot add memory to heap\n");
+ munmap(param.addr, param.len);
+ return -1;
+ }
+
+ /* success */
+
+ TESTPMD_LOG(DEBUG, "Allocated %zuMB of external memory\n",
+ param.len >> 20);
+
+ return 0;
+}
+static void
+dma_unmap_cb(struct rte_mempool *mp __rte_unused, void *opaque __rte_unused,
+ struct rte_mempool_memhdr *memhdr, unsigned mem_idx __rte_unused)
+{
+ uint16_t pid = 0;
+ int ret;
+
+ RTE_ETH_FOREACH_DEV(pid) {
+ struct rte_eth_dev *dev =
+ &rte_eth_devices[pid];
+
+ ret = rte_dev_dma_unmap(dev->device, memhdr->addr, 0,
+ memhdr->len);
+ if (ret) {
+ TESTPMD_LOG(DEBUG,
+ "unable to DMA unmap addr 0x%p "
+ "for device %s\n",
+ memhdr->addr, dev->data->name);
+ }
+ }
+ ret = rte_extmem_unregister(memhdr->addr, memhdr->len);
+ if (ret) {
+ TESTPMD_LOG(DEBUG,
+ "unable to un-register addr 0x%p\n", memhdr->addr);
+ }
+}
+
+static void
+dma_map_cb(struct rte_mempool *mp __rte_unused, void *opaque __rte_unused,
+ struct rte_mempool_memhdr *memhdr, unsigned mem_idx __rte_unused)
+{
+ uint16_t pid = 0;
+ size_t page_size = sysconf(_SC_PAGESIZE);
+ int ret;
+
+ ret = rte_extmem_register(memhdr->addr, memhdr->len, NULL, 0,
+ page_size);
+ if (ret) {
+ TESTPMD_LOG(DEBUG,
+ "unable to register addr 0x%p\n", memhdr->addr);
+ return;
+ }
+ RTE_ETH_FOREACH_DEV(pid) {
+ struct rte_eth_dev *dev =
+ &rte_eth_devices[pid];
+
+ ret = rte_dev_dma_map(dev->device, memhdr->addr, 0,
+ memhdr->len);
+ if (ret) {
+ TESTPMD_LOG(DEBUG,
+ "unable to DMA map addr 0x%p "
+ "for device %s\n",
+ memhdr->addr, dev->data->name);
+ }
+ }
+}
+
+static unsigned int
+setup_extbuf(uint32_t nb_mbufs, uint16_t mbuf_sz, unsigned int socket_id,
+ char *pool_name, struct rte_pktmbuf_extmem **ext_mem)
+{
+ struct rte_pktmbuf_extmem *xmem;
+ unsigned int ext_num, zone_num, elt_num;
+ uint16_t elt_size;
+
+ elt_size = RTE_ALIGN_CEIL(mbuf_sz, RTE_CACHE_LINE_SIZE);
+ elt_num = EXTBUF_ZONE_SIZE / elt_size;
+ zone_num = (nb_mbufs + elt_num - 1) / elt_num;
+
+ xmem = malloc(sizeof(struct rte_pktmbuf_extmem) * zone_num);
+ if (xmem == NULL) {
+ TESTPMD_LOG(ERR, "Cannot allocate memory for "
+ "external buffer descriptors\n");
+ *ext_mem = NULL;
+ return 0;
+ }
+ for (ext_num = 0; ext_num < zone_num; ext_num++) {
+ struct rte_pktmbuf_extmem *xseg = xmem + ext_num;
+ const struct rte_memzone *mz;
+ char mz_name[RTE_MEMZONE_NAMESIZE];
+ int ret;
+
+ ret = snprintf(mz_name, sizeof(mz_name),
+ RTE_MEMPOOL_MZ_FORMAT "_xb_%u", pool_name, ext_num);
+ if (ret < 0 || ret >= (int)sizeof(mz_name)) {
+ errno = ENAMETOOLONG;
+ ext_num = 0;
+ break;
+ }
+ mz = rte_memzone_reserve_aligned(mz_name, EXTBUF_ZONE_SIZE,
+ socket_id,
+ RTE_MEMZONE_IOVA_CONTIG |
+ RTE_MEMZONE_1GB |
+ RTE_MEMZONE_SIZE_HINT_ONLY,
+ EXTBUF_ZONE_SIZE);
+ if (mz == NULL) {
+ /*
+ * The caller exits on external buffer creation
+ * error, so there is no need to free memzones.
+ */
+ errno = ENOMEM;
+ ext_num = 0;
+ break;
+ }
+ xseg->buf_ptr = mz->addr;
+ xseg->buf_iova = mz->iova;
+ xseg->buf_len = EXTBUF_ZONE_SIZE;
+ xseg->elt_size = elt_size;
+ }
+ if (ext_num == 0 && xmem != NULL) {
+ free(xmem);
+ xmem = NULL;
+ }
+ *ext_mem = xmem;
+ return ext_num;
+}
+
/*
* Configuration initialisation done once at init time.
*/
-static void
+static struct rte_mempool *
mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf,
- unsigned int socket_id)
+ unsigned int socket_id, uint16_t size_idx)
{
char pool_name[RTE_MEMPOOL_NAMESIZE];
struct rte_mempool *rte_mp = NULL;
uint32_t mb_size;
mb_size = sizeof(struct rte_mbuf) + mbuf_seg_size;
- mbuf_poolname_build(socket_id, pool_name, sizeof(pool_name));
+ mbuf_poolname_build(socket_id, pool_name, sizeof(pool_name), size_idx);
- RTE_LOG(INFO, USER1,
+ TESTPMD_LOG(INFO,
"create a new mbuf pool <%s>: n=%u, size=%u, socket=%u\n",
pool_name, nb_mbuf, mbuf_seg_size, socket_id);
-#ifdef RTE_LIBRTE_PMD_XENVIRT
- rte_mp = rte_mempool_gntalloc_create(pool_name, nb_mbuf, mb_size,
- (unsigned) mb_mempool_cache,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- socket_id, 0);
-#endif
-
- /* if the former XEN allocation failed fall back to normal allocation */
- if (rte_mp == NULL) {
- if (mp_anon != 0) {
+ switch (mp_alloc_type) {
+ case MP_ALLOC_NATIVE:
+ {
+ /* wrapper to rte_mempool_create() */
+ TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n",
+ rte_mbuf_best_mempool_ops());
+ rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
+ mb_mempool_cache, 0, mbuf_seg_size, socket_id);
+ break;
+ }
+ case MP_ALLOC_ANON:
+ {
rte_mp = rte_mempool_create_empty(pool_name, nb_mbuf,
- mb_size, (unsigned) mb_mempool_cache,
+ mb_size, (unsigned int) mb_mempool_cache,
sizeof(struct rte_pktmbuf_pool_private),
- socket_id, 0);
+ socket_id, mempool_flags);
if (rte_mp == NULL)
goto err;
}
rte_pktmbuf_pool_init(rte_mp, NULL);
rte_mempool_obj_iter(rte_mp, rte_pktmbuf_init, NULL);
- } else {
- /* wrapper to rte_mempool_create() */
+ rte_mempool_mem_iter(rte_mp, dma_map_cb, NULL);
+ break;
+ }
+ case MP_ALLOC_XMEM:
+ case MP_ALLOC_XMEM_HUGE:
+ {
+ int heap_socket;
+ bool huge = mp_alloc_type == MP_ALLOC_XMEM_HUGE;
+
+ if (setup_extmem(nb_mbuf, mbuf_seg_size, huge) < 0)
+ rte_exit(EXIT_FAILURE, "Could not create external memory\n");
+
+ heap_socket =
+ rte_malloc_heap_get_socket(EXTMEM_HEAP_NAME);
+ if (heap_socket < 0)
+ rte_exit(EXIT_FAILURE, "Could not get external memory socket ID\n");
+
+ TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n",
+ rte_mbuf_best_mempool_ops());
rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
- mb_mempool_cache, 0, mbuf_seg_size, socket_id);
+ mb_mempool_cache, 0, mbuf_seg_size,
+ heap_socket);
+ break;
+ }
+ case MP_ALLOC_XBUF:
+ {
+ struct rte_pktmbuf_extmem *ext_mem;
+ unsigned int ext_num;
+
+ ext_num = setup_extbuf(nb_mbuf, mbuf_seg_size,
+ socket_id, pool_name, &ext_mem);
+ if (ext_num == 0)
+ rte_exit(EXIT_FAILURE,
+ "Can't create pinned data buffers\n");
+
+ TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n",
+ rte_mbuf_best_mempool_ops());
+ rte_mp = rte_pktmbuf_pool_create_extbuf
+ (pool_name, nb_mbuf, mb_mempool_cache,
+ 0, mbuf_seg_size, socket_id,
+ ext_mem, ext_num);
+ free(ext_mem);
+ break;
+ }
+ default:
+ {
+ rte_exit(EXIT_FAILURE, "Invalid mempool creation mode\n");
}
}
} else if (verbose_level > 0) {
rte_mempool_dump(stdout, rte_mp);
}
+ return rte_mp;
}
/*
{
static int warning_once = 0;
- if (socket_id >= max_socket) {
+ if (new_socket_id(socket_id)) {
if (!warning_once && numa_support)
printf("Warning: NUMA should be configured manually by"
" using --port-numa-config and"
return 0;
}
+/*
+ * Get the allowed maximum number of RX queues.
+ * *pid return the port id which has minimal value of
+ * max_rx_queues in all ports.
+ */
+queueid_t
+get_allowed_max_nb_rxq(portid_t *pid)
+{
+ queueid_t allowed_max_rxq = RTE_MAX_QUEUES_PER_PORT;
+ bool max_rxq_valid = false;
+ portid_t pi;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
+ continue;
+
+ max_rxq_valid = true;
+ if (dev_info.max_rx_queues < allowed_max_rxq) {
+ allowed_max_rxq = dev_info.max_rx_queues;
+ *pid = pi;
+ }
+ }
+ return max_rxq_valid ? allowed_max_rxq : 0;
+}
+
+/*
+ * Check input rxq is valid or not.
+ * If input rxq is not greater than any of maximum number
+ * of RX queues of all ports, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_rxq(queueid_t rxq)
+{
+ queueid_t allowed_max_rxq;
+ portid_t pid = 0;
+
+ allowed_max_rxq = get_allowed_max_nb_rxq(&pid);
+ if (rxq > allowed_max_rxq) {
+ printf("Fail: input rxq (%u) can't be greater "
+ "than max_rx_queues (%u) of port %u\n",
+ rxq,
+ allowed_max_rxq,
+ pid);
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * Get the allowed maximum number of TX queues.
+ * *pid return the port id which has minimal value of
+ * max_tx_queues in all ports.
+ */
+queueid_t
+get_allowed_max_nb_txq(portid_t *pid)
+{
+ queueid_t allowed_max_txq = RTE_MAX_QUEUES_PER_PORT;
+ bool max_txq_valid = false;
+ portid_t pi;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
+ continue;
+
+ max_txq_valid = true;
+ if (dev_info.max_tx_queues < allowed_max_txq) {
+ allowed_max_txq = dev_info.max_tx_queues;
+ *pid = pi;
+ }
+ }
+ return max_txq_valid ? allowed_max_txq : 0;
+}
+
+/*
+ * Check input txq is valid or not.
+ * If input txq is not greater than any of maximum number
+ * of TX queues of all ports, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_txq(queueid_t txq)
+{
+ queueid_t allowed_max_txq;
+ portid_t pid = 0;
+
+ allowed_max_txq = get_allowed_max_nb_txq(&pid);
+ if (txq > allowed_max_txq) {
+ printf("Fail: input txq (%u) can't be greater "
+ "than max_tx_queues (%u) of port %u\n",
+ txq,
+ allowed_max_txq,
+ pid);
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * Get the allowed maximum number of RXDs of every rx queue.
+ * *pid return the port id which has minimal value of
+ * max_rxd in all queues of all ports.
+ */
+static uint16_t
+get_allowed_max_nb_rxd(portid_t *pid)
+{
+ uint16_t allowed_max_rxd = UINT16_MAX;
+ portid_t pi;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
+ continue;
+
+ if (dev_info.rx_desc_lim.nb_max < allowed_max_rxd) {
+ allowed_max_rxd = dev_info.rx_desc_lim.nb_max;
+ *pid = pi;
+ }
+ }
+ return allowed_max_rxd;
+}
+
+/*
+ * Get the allowed minimal number of RXDs of every rx queue.
+ * *pid return the port id which has minimal value of
+ * min_rxd in all queues of all ports.
+ */
+static uint16_t
+get_allowed_min_nb_rxd(portid_t *pid)
+{
+ uint16_t allowed_min_rxd = 0;
+ portid_t pi;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
+ continue;
+
+ if (dev_info.rx_desc_lim.nb_min > allowed_min_rxd) {
+ allowed_min_rxd = dev_info.rx_desc_lim.nb_min;
+ *pid = pi;
+ }
+ }
+
+ return allowed_min_rxd;
+}
+
+/*
+ * Check input rxd is valid or not.
+ * If input rxd is not greater than any of maximum number
+ * of RXDs of every Rx queues and is not less than any of
+ * minimal number of RXDs of every Rx queues, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_rxd(queueid_t rxd)
+{
+ uint16_t allowed_max_rxd;
+ uint16_t allowed_min_rxd;
+ portid_t pid = 0;
+
+ allowed_max_rxd = get_allowed_max_nb_rxd(&pid);
+ if (rxd > allowed_max_rxd) {
+ printf("Fail: input rxd (%u) can't be greater "
+ "than max_rxds (%u) of port %u\n",
+ rxd,
+ allowed_max_rxd,
+ pid);
+ return -1;
+ }
+
+ allowed_min_rxd = get_allowed_min_nb_rxd(&pid);
+ if (rxd < allowed_min_rxd) {
+ printf("Fail: input rxd (%u) can't be less "
+ "than min_rxds (%u) of port %u\n",
+ rxd,
+ allowed_min_rxd,
+ pid);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Get the allowed maximum number of TXDs of every rx queues.
+ * *pid return the port id which has minimal value of
+ * max_txd in every tx queue.
+ */
+static uint16_t
+get_allowed_max_nb_txd(portid_t *pid)
+{
+ uint16_t allowed_max_txd = UINT16_MAX;
+ portid_t pi;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
+ continue;
+
+ if (dev_info.tx_desc_lim.nb_max < allowed_max_txd) {
+ allowed_max_txd = dev_info.tx_desc_lim.nb_max;
+ *pid = pi;
+ }
+ }
+ return allowed_max_txd;
+}
+
+/*
+ * Get the allowed maximum number of TXDs of every tx queues.
+ * *pid return the port id which has minimal value of
+ * min_txd in every tx queue.
+ */
+static uint16_t
+get_allowed_min_nb_txd(portid_t *pid)
+{
+ uint16_t allowed_min_txd = 0;
+ portid_t pi;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
+ continue;
+
+ if (dev_info.tx_desc_lim.nb_min > allowed_min_txd) {
+ allowed_min_txd = dev_info.tx_desc_lim.nb_min;
+ *pid = pi;
+ }
+ }
+
+ return allowed_min_txd;
+}
+
+/*
+ * Check input txd is valid or not.
+ * If input txd is not greater than any of maximum number
+ * of TXDs of every Rx queues, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_txd(queueid_t txd)
+{
+ uint16_t allowed_max_txd;
+ uint16_t allowed_min_txd;
+ portid_t pid = 0;
+
+ allowed_max_txd = get_allowed_max_nb_txd(&pid);
+ if (txd > allowed_max_txd) {
+ printf("Fail: input txd (%u) can't be greater "
+ "than max_txds (%u) of port %u\n",
+ txd,
+ allowed_max_txd,
+ pid);
+ return -1;
+ }
+
+ allowed_min_txd = get_allowed_min_nb_txd(&pid);
+ if (txd < allowed_min_txd) {
+ printf("Fail: input txd (%u) can't be less "
+ "than min_txds (%u) of port %u\n",
+ txd,
+ allowed_min_txd,
+ pid);
+ return -1;
+ }
+ return 0;
+}
+
+
+/*
+ * Get the allowed maximum number of hairpin queues.
+ * *pid return the port id which has minimal value of
+ * max_hairpin_queues in all ports.
+ */
+queueid_t
+get_allowed_max_nb_hairpinq(portid_t *pid)
+{
+ queueid_t allowed_max_hairpinq = RTE_MAX_QUEUES_PER_PORT;
+ portid_t pi;
+ struct rte_eth_hairpin_cap cap;
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ if (rte_eth_dev_hairpin_capability_get(pi, &cap) != 0) {
+ *pid = pi;
+ return 0;
+ }
+ if (cap.max_nb_queues < allowed_max_hairpinq) {
+ allowed_max_hairpinq = cap.max_nb_queues;
+ *pid = pi;
+ }
+ }
+ return allowed_max_hairpinq;
+}
+
+/*
+ * Check input hairpin is valid or not.
+ * If input hairpin is not greater than any of maximum number
+ * of hairpin queues of all ports, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_hairpinq(queueid_t hairpinq)
+{
+ queueid_t allowed_max_hairpinq;
+ portid_t pid = 0;
+
+ allowed_max_hairpinq = get_allowed_max_nb_hairpinq(&pid);
+ if (hairpinq > allowed_max_hairpinq) {
+ printf("Fail: input hairpin (%u) can't be greater "
+ "than max_hairpin_queues (%u) of port %u\n",
+ hairpinq, allowed_max_hairpinq, pid);
+ return -1;
+ }
+ return 0;
+}
+
static void
init_config(void)
{
unsigned int nb_mbuf_per_pool;
lcoreid_t lc_id;
uint8_t port_per_socket[RTE_MAX_NUMA_NODES];
+ struct rte_gro_param gro_param;
+ uint32_t gso_types;
+ uint16_t data_size;
+ bool warning = 0;
+ int k;
+ int ret;
memset(port_per_socket,0,RTE_MAX_NUMA_NODES);
+
/* Configuration of logical cores. */
fwd_lcores = rte_zmalloc("testpmd: fwd_lcores",
sizeof(struct fwd_lcore *) * nb_lcores,
fwd_lcores[lc_id]->cpuid_idx = lc_id;
}
- /*
- * Create pools of mbuf.
- * If NUMA support is disabled, create a single pool of mbuf in
- * socket 0 memory by default.
- * Otherwise, create a pool of mbuf in the memory of sockets 0 and 1.
- *
- * Use the maximum value of nb_rxd and nb_txd here, then nb_rxd and
- * nb_txd can be configured at run time.
- */
- if (param_total_num_mbufs)
- nb_mbuf_per_pool = param_total_num_mbufs;
- else {
- nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX + (nb_lcores * mb_mempool_cache)
- + RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
-
- if (!numa_support)
- nb_mbuf_per_pool =
- (nb_mbuf_per_pool * RTE_MAX_ETHPORTS);
- }
+ RTE_ETH_FOREACH_DEV(pid) {
+ port = &ports[pid];
+ /* Apply default TxRx configuration for all ports */
+ port->dev_conf.txmode = tx_mode;
+ port->dev_conf.rxmode = rx_mode;
- if (!numa_support) {
- if (socket_num == UMA_NO_CONFIG)
- mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool, 0);
- else
- mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
- socket_num);
- }
+ ret = eth_dev_info_get_print_err(pid, &port->dev_info);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_dev_info_get() failed\n");
- FOREACH_PORT(pid, ports) {
- port = &ports[pid];
- rte_eth_dev_info_get(pid, &port->dev_info);
+ ret = update_jumbo_frame_offload(pid);
+ if (ret != 0)
+ printf("Updating jumbo frame offload failed for port %u\n",
+ pid);
+ if (!(port->dev_info.tx_offload_capa &
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE))
+ port->dev_conf.txmode.offloads &=
+ ~DEV_TX_OFFLOAD_MBUF_FAST_FREE;
if (numa_support) {
if (port_numa[pid] != NUMA_NO_CONFIG)
port_per_socket[port_numa[pid]]++;
else {
uint32_t socket_id = rte_eth_dev_socket_id(pid);
- /* if socket_id is invalid, set to 0 */
+ /*
+ * if socket_id is invalid,
+ * set to the first available socket.
+ */
if (check_socket_id(socket_id) < 0)
- socket_id = 0;
+ socket_id = socket_ids[0];
port_per_socket[socket_id]++;
}
}
+ /* Apply Rx offloads configuration */
+ for (k = 0; k < port->dev_info.max_rx_queues; k++)
+ port->rx_conf[k].offloads =
+ port->dev_conf.rxmode.offloads;
+ /* Apply Tx offloads configuration */
+ for (k = 0; k < port->dev_info.max_tx_queues; k++)
+ port->tx_conf[k].offloads =
+ port->dev_conf.txmode.offloads;
+
+ if (eth_link_speed)
+ port->dev_conf.link_speeds = eth_link_speed;
+
/* set flag to initialize port/queue */
port->need_reconfig = 1;
port->need_reconfig_queues = 1;
+ port->tx_metadata = 0;
+
+ /* Check for maximum number of segments per MTU. Accordingly
+ * update the mbuf data size.
+ */
+ if (port->dev_info.rx_desc_lim.nb_mtu_seg_max != UINT16_MAX &&
+ port->dev_info.rx_desc_lim.nb_mtu_seg_max != 0) {
+ data_size = rx_mode.max_rx_pkt_len /
+ port->dev_info.rx_desc_lim.nb_mtu_seg_max;
+
+ if ((data_size + RTE_PKTMBUF_HEADROOM) >
+ mbuf_data_size[0]) {
+ mbuf_data_size[0] = data_size +
+ RTE_PKTMBUF_HEADROOM;
+ warning = 1;
+ }
+ }
+ }
+
+ if (warning)
+ TESTPMD_LOG(WARNING,
+ "Configured mbuf size of the first segment %hu\n",
+ mbuf_data_size[0]);
+ /*
+ * Create pools of mbuf.
+ * If NUMA support is disabled, create a single pool of mbuf in
+ * socket 0 memory by default.
+ * Otherwise, create a pool of mbuf in the memory of sockets 0 and 1.
+ *
+ * Use the maximum value of nb_rxd and nb_txd here, then nb_rxd and
+ * nb_txd can be configured at run time.
+ */
+ if (param_total_num_mbufs)
+ nb_mbuf_per_pool = param_total_num_mbufs;
+ else {
+ nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX +
+ (nb_lcores * mb_mempool_cache) +
+ RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
+ nb_mbuf_per_pool *= RTE_MAX_ETHPORTS;
}
if (numa_support) {
+ uint8_t i, j;
+
+ for (i = 0; i < num_sockets; i++)
+ for (j = 0; j < mbuf_data_size_n; j++)
+ mempools[i * MAX_SEGS_BUFFER_SPLIT + j] =
+ mbuf_pool_create(mbuf_data_size[j],
+ nb_mbuf_per_pool,
+ socket_ids[i], j);
+ } else {
uint8_t i;
- unsigned int nb_mbuf;
- if (param_total_num_mbufs)
- nb_mbuf_per_pool = nb_mbuf_per_pool/nb_ports;
-
- for (i = 0; i < max_socket; i++) {
- nb_mbuf = (nb_mbuf_per_pool * RTE_MAX_ETHPORTS);
- if (nb_mbuf)
- mbuf_pool_create(mbuf_data_size,
- nb_mbuf,i);
- }
+ for (i = 0; i < mbuf_data_size_n; i++)
+ mempools[i] = mbuf_pool_create
+ (mbuf_data_size[i],
+ nb_mbuf_per_pool,
+ socket_num == UMA_NO_CONFIG ?
+ 0 : socket_num, i);
}
+
init_port_config();
+ gso_types = DEV_TX_OFFLOAD_TCP_TSO | DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
+ DEV_TX_OFFLOAD_GRE_TNL_TSO | DEV_TX_OFFLOAD_UDP_TSO;
/*
* Records which Mbuf pool to use by each logical core, if needed.
*/
for (lc_id = 0; lc_id < nb_lcores; lc_id++) {
mbp = mbuf_pool_find(
- rte_lcore_to_socket_id(fwd_lcores_cpuids[lc_id]));
+ rte_lcore_to_socket_id(fwd_lcores_cpuids[lc_id]), 0);
if (mbp == NULL)
- mbp = mbuf_pool_find(0);
+ mbp = mbuf_pool_find(0, 0);
fwd_lcores[lc_id]->mbp = mbp;
+ /* initialize GSO context */
+ fwd_lcores[lc_id]->gso_ctx.direct_pool = mbp;
+ fwd_lcores[lc_id]->gso_ctx.indirect_pool = mbp;
+ fwd_lcores[lc_id]->gso_ctx.gso_types = gso_types;
+ fwd_lcores[lc_id]->gso_ctx.gso_size = RTE_ETHER_MAX_LEN -
+ RTE_ETHER_CRC_LEN;
+ fwd_lcores[lc_id]->gso_ctx.flag = 0;
}
/* Configuration of packet forwarding streams. */
rte_exit(EXIT_FAILURE, "FAIL from init_fwd_streams()\n");
fwd_config_setup();
+
+ /* create a gro context for each lcore */
+ gro_param.gro_types = RTE_GRO_TCP_IPV4;
+ gro_param.max_flow_num = GRO_MAX_FLUSH_CYCLES;
+ gro_param.max_item_per_flow = MAX_PKT_BURST;
+ for (lc_id = 0; lc_id < nb_lcores; lc_id++) {
+ gro_param.socket_id = rte_lcore_to_socket_id(
+ fwd_lcores_cpuids[lc_id]);
+ fwd_lcores[lc_id]->gro_ctx = rte_gro_ctx_create(&gro_param);
+ if (fwd_lcores[lc_id]->gro_ctx == NULL) {
+ rte_exit(EXIT_FAILURE,
+ "rte_gro_ctx_create() failed\n");
+ }
+ }
}
reconfig(portid_t new_port_id, unsigned socket_id)
{
struct rte_port *port;
+ int ret;
/* Reconfiguration of Ethernet ports. */
port = &ports[new_port_id];
- rte_eth_dev_info_get(new_port_id, &port->dev_info);
+
+ ret = eth_dev_info_get_print_err(new_port_id, &port->dev_info);
+ if (ret != 0)
+ return;
/* set flag to initialize port/queue */
port->need_reconfig = 1;
queueid_t q;
/* set socket id according to numa or not */
- FOREACH_PORT(pid, ports) {
+ RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
if (nb_rxq > port->dev_info.max_rx_queues) {
printf("Fail: nb_rxq(%d) is greater than "
else {
port->socket_id = rte_eth_dev_socket_id(pid);
- /* if socket_id is invalid, set to 0 */
+ /*
+ * if socket_id is invalid,
+ * set to the first available socket.
+ */
if (check_socket_id(port->socket_id) < 0)
- port->socket_id = 0;
+ port->socket_id = socket_ids[0];
}
}
else {
/* init new */
nb_fwd_streams = nb_fwd_streams_new;
- fwd_streams = rte_zmalloc("testpmd: fwd_streams",
- sizeof(struct fwd_stream *) * nb_fwd_streams, RTE_CACHE_LINE_SIZE);
- if (fwd_streams == NULL)
- rte_exit(EXIT_FAILURE, "rte_zmalloc(%d (struct fwd_stream *)) "
- "failed\n", nb_fwd_streams);
+ if (nb_fwd_streams) {
+ fwd_streams = rte_zmalloc("testpmd: fwd_streams",
+ sizeof(struct fwd_stream *) * nb_fwd_streams,
+ RTE_CACHE_LINE_SIZE);
+ if (fwd_streams == NULL)
+ rte_exit(EXIT_FAILURE, "rte_zmalloc(%d"
+ " (struct fwd_stream *)) failed\n",
+ nb_fwd_streams);
- for (sm_id = 0; sm_id < nb_fwd_streams; sm_id++) {
- fwd_streams[sm_id] = rte_zmalloc("testpmd: struct fwd_stream",
- sizeof(struct fwd_stream), RTE_CACHE_LINE_SIZE);
- if (fwd_streams[sm_id] == NULL)
- rte_exit(EXIT_FAILURE, "rte_zmalloc(struct fwd_stream)"
- " failed\n");
+ for (sm_id = 0; sm_id < nb_fwd_streams; sm_id++) {
+ fwd_streams[sm_id] = rte_zmalloc("testpmd:"
+ " struct fwd_stream", sizeof(struct fwd_stream),
+ RTE_CACHE_LINE_SIZE);
+ if (fwd_streams[sm_id] == NULL)
+ rte_exit(EXIT_FAILURE, "rte_zmalloc"
+ "(struct fwd_stream) failed\n");
+ }
}
return 0;
}
-#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
static void
pkt_burst_stats_display(const char *rx_tx, struct pkt_burst_stats *pbs)
{
- unsigned int total_burst;
- unsigned int nb_burst;
- unsigned int burst_stats[3];
- uint16_t pktnb_stats[3];
+ uint64_t total_burst, sburst;
+ uint64_t nb_burst;
+ uint64_t burst_stats[4];
+ uint16_t pktnb_stats[4];
uint16_t nb_pkt;
- int burst_percent[3];
+ int burst_percent[4], sburstp;
+ int i;
/*
* First compute the total number of packet bursts and the
* two highest numbers of bursts of the same number of packets.
*/
- total_burst = 0;
- burst_stats[0] = burst_stats[1] = burst_stats[2] = 0;
- pktnb_stats[0] = pktnb_stats[1] = pktnb_stats[2] = 0;
- for (nb_pkt = 0; nb_pkt < MAX_PKT_BURST; nb_pkt++) {
+ memset(&burst_stats, 0x0, sizeof(burst_stats));
+ memset(&pktnb_stats, 0x0, sizeof(pktnb_stats));
+
+ /* Show stats for 0 burst size always */
+ total_burst = pbs->pkt_burst_spread[0];
+ burst_stats[0] = pbs->pkt_burst_spread[0];
+ pktnb_stats[0] = 0;
+
+ /* Find the next 2 burst sizes with highest occurrences. */
+ for (nb_pkt = 1; nb_pkt < MAX_PKT_BURST; nb_pkt++) {
nb_burst = pbs->pkt_burst_spread[nb_pkt];
+
if (nb_burst == 0)
continue;
+
total_burst += nb_burst;
- if (nb_burst > burst_stats[0]) {
- burst_stats[1] = burst_stats[0];
- pktnb_stats[1] = pktnb_stats[0];
- burst_stats[0] = nb_burst;
- pktnb_stats[0] = nb_pkt;
+
+ if (nb_burst > burst_stats[1]) {
+ burst_stats[2] = burst_stats[1];
+ pktnb_stats[2] = pktnb_stats[1];
+ burst_stats[1] = nb_burst;
+ pktnb_stats[1] = nb_pkt;
+ } else if (nb_burst > burst_stats[2]) {
+ burst_stats[2] = nb_burst;
+ pktnb_stats[2] = nb_pkt;
}
}
if (total_burst == 0)
return;
- burst_percent[0] = (burst_stats[0] * 100) / total_burst;
- printf(" %s-bursts : %u [%d%% of %d pkts", rx_tx, total_burst,
- burst_percent[0], (int) pktnb_stats[0]);
- if (burst_stats[0] == total_burst) {
- printf("]\n");
- return;
+
+ printf(" %s-bursts : %"PRIu64" [", rx_tx, total_burst);
+ for (i = 0, sburst = 0, sburstp = 0; i < 4; i++) {
+ if (i == 3) {
+ printf("%d%% of other]\n", 100 - sburstp);
+ return;
+ }
+
+ sburst += burst_stats[i];
+ if (sburst == total_burst) {
+ printf("%d%% of %d pkts]\n",
+ 100 - sburstp, (int) pktnb_stats[i]);
+ return;
+ }
+
+ burst_percent[i] =
+ (double)burst_stats[i] / total_burst * 100;
+ printf("%d%% of %d pkts + ",
+ burst_percent[i], (int) pktnb_stats[i]);
+ sburstp += burst_percent[i];
}
- if (burst_stats[0] + burst_stats[1] == total_burst) {
- printf(" + %d%% of %d pkts]\n",
- 100 - burst_percent[0], pktnb_stats[1]);
+}
+
+static void
+fwd_stream_stats_display(streamid_t stream_id)
+{
+ struct fwd_stream *fs;
+ static const char *fwd_top_stats_border = "-------";
+
+ fs = fwd_streams[stream_id];
+ if ((fs->rx_packets == 0) && (fs->tx_packets == 0) &&
+ (fs->fwd_dropped == 0))
return;
+ printf("\n %s Forward Stats for RX Port=%2d/Queue=%2d -> "
+ "TX Port=%2d/Queue=%2d %s\n",
+ fwd_top_stats_border, fs->rx_port, fs->rx_queue,
+ fs->tx_port, fs->tx_queue, fwd_top_stats_border);
+ printf(" RX-packets: %-14"PRIu64" TX-packets: %-14"PRIu64
+ " TX-dropped: %-14"PRIu64,
+ fs->rx_packets, fs->tx_packets, fs->fwd_dropped);
+
+ /* if checksum mode */
+ if (cur_fwd_eng == &csum_fwd_engine) {
+ printf(" RX- bad IP checksum: %-14"PRIu64
+ " Rx- bad L4 checksum: %-14"PRIu64
+ " Rx- bad outer L4 checksum: %-14"PRIu64"\n",
+ fs->rx_bad_ip_csum, fs->rx_bad_l4_csum,
+ fs->rx_bad_outer_l4_csum);
+ printf(" RX- bad outer IP checksum: %-14"PRIu64"\n",
+ fs->rx_bad_outer_ip_csum);
+ } else {
+ printf("\n");
}
- burst_percent[1] = (burst_stats[1] * 100) / total_burst;
- burst_percent[2] = 100 - (burst_percent[0] + burst_percent[1]);
- if ((burst_percent[1] == 0) || (burst_percent[2] == 0)) {
- printf(" + %d%% of others]\n", 100 - burst_percent[0]);
- return;
+
+ if (record_burst_stats) {
+ pkt_burst_stats_display("RX", &fs->rx_burst_stats);
+ pkt_burst_stats_display("TX", &fs->tx_burst_stats);
}
- printf(" + %d%% of %d pkts + %d%% of others]\n",
- burst_percent[1], (int) pktnb_stats[1], burst_percent[2]);
}
-#endif /* RTE_TEST_PMD_RECORD_BURST_STATS */
-static void
-fwd_port_stats_display(portid_t port_id, struct rte_eth_stats *stats)
-{
- struct rte_port *port;
- uint8_t i;
+void
+fwd_stats_display(void)
+{
+ static const char *fwd_stats_border = "----------------------";
+ static const char *acc_stats_border = "+++++++++++++++";
+ struct {
+ struct fwd_stream *rx_stream;
+ struct fwd_stream *tx_stream;
+ uint64_t tx_dropped;
+ uint64_t rx_bad_ip_csum;
+ uint64_t rx_bad_l4_csum;
+ uint64_t rx_bad_outer_l4_csum;
+ uint64_t rx_bad_outer_ip_csum;
+ } ports_stats[RTE_MAX_ETHPORTS];
+ uint64_t total_rx_dropped = 0;
+ uint64_t total_tx_dropped = 0;
+ uint64_t total_rx_nombuf = 0;
+ struct rte_eth_stats stats;
+ uint64_t fwd_cycles = 0;
+ uint64_t total_recv = 0;
+ uint64_t total_xmit = 0;
+ struct rte_port *port;
+ streamid_t sm_id;
+ portid_t pt_id;
+ int i;
+
+ memset(ports_stats, 0, sizeof(ports_stats));
+
+ for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
+ struct fwd_stream *fs = fwd_streams[sm_id];
+
+ if (cur_fwd_config.nb_fwd_streams >
+ cur_fwd_config.nb_fwd_ports) {
+ fwd_stream_stats_display(sm_id);
+ } else {
+ ports_stats[fs->tx_port].tx_stream = fs;
+ ports_stats[fs->rx_port].rx_stream = fs;
+ }
+
+ ports_stats[fs->tx_port].tx_dropped += fs->fwd_dropped;
- static const char *fwd_stats_border = "----------------------";
+ ports_stats[fs->rx_port].rx_bad_ip_csum += fs->rx_bad_ip_csum;
+ ports_stats[fs->rx_port].rx_bad_l4_csum += fs->rx_bad_l4_csum;
+ ports_stats[fs->rx_port].rx_bad_outer_l4_csum +=
+ fs->rx_bad_outer_l4_csum;
+ ports_stats[fs->rx_port].rx_bad_outer_ip_csum +=
+ fs->rx_bad_outer_ip_csum;
- port = &ports[port_id];
- printf("\n %s Forward statistics for port %-2d %s\n",
- fwd_stats_border, port_id, fwd_stats_border);
+ if (record_core_cycles)
+ fwd_cycles += fs->core_cycles;
+ }
+ for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
+ pt_id = fwd_ports_ids[i];
+ port = &ports[pt_id];
- if ((!port->rx_queue_stats_mapping_enabled) && (!port->tx_queue_stats_mapping_enabled)) {
- printf(" RX-packets: %-14"PRIu64" RX-dropped: %-14"PRIu64"RX-total: "
- "%-"PRIu64"\n",
- stats->ipackets, stats->imissed,
- (uint64_t) (stats->ipackets + stats->imissed));
+ rte_eth_stats_get(pt_id, &stats);
+ stats.ipackets -= port->stats.ipackets;
+ stats.opackets -= port->stats.opackets;
+ stats.ibytes -= port->stats.ibytes;
+ stats.obytes -= port->stats.obytes;
+ stats.imissed -= port->stats.imissed;
+ stats.oerrors -= port->stats.oerrors;
+ stats.rx_nombuf -= port->stats.rx_nombuf;
- if (cur_fwd_eng == &csum_fwd_engine)
- printf(" Bad-ipcsum: %-14"PRIu64" Bad-l4csum: %-14"PRIu64" \n",
- port->rx_bad_ip_csum, port->rx_bad_l4_csum);
- if ((stats->ierrors + stats->rx_nombuf) > 0) {
- printf(" RX-error: %-"PRIu64"\n", stats->ierrors);
- printf(" RX-nombufs: %-14"PRIu64"\n", stats->rx_nombuf);
- }
+ total_recv += stats.ipackets;
+ total_xmit += stats.opackets;
+ total_rx_dropped += stats.imissed;
+ total_tx_dropped += ports_stats[pt_id].tx_dropped;
+ total_tx_dropped += stats.oerrors;
+ total_rx_nombuf += stats.rx_nombuf;
- printf(" TX-packets: %-14"PRIu64" TX-dropped: %-14"PRIu64"TX-total: "
- "%-"PRIu64"\n",
- stats->opackets, port->tx_dropped,
- (uint64_t) (stats->opackets + port->tx_dropped));
- }
- else {
- printf(" RX-packets: %14"PRIu64" RX-dropped:%14"PRIu64" RX-total:"
- "%14"PRIu64"\n",
- stats->ipackets, stats->imissed,
- (uint64_t) (stats->ipackets + stats->imissed));
-
- if (cur_fwd_eng == &csum_fwd_engine)
- printf(" Bad-ipcsum:%14"PRIu64" Bad-l4csum:%14"PRIu64"\n",
- port->rx_bad_ip_csum, port->rx_bad_l4_csum);
- if ((stats->ierrors + stats->rx_nombuf) > 0) {
- printf(" RX-error:%"PRIu64"\n", stats->ierrors);
- printf(" RX-nombufs: %14"PRIu64"\n",
- stats->rx_nombuf);
- }
-
- printf(" TX-packets: %14"PRIu64" TX-dropped:%14"PRIu64" TX-total:"
- "%14"PRIu64"\n",
- stats->opackets, port->tx_dropped,
- (uint64_t) (stats->opackets + port->tx_dropped));
- }
-
-#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
- if (port->rx_stream)
- pkt_burst_stats_display("RX",
- &port->rx_stream->rx_burst_stats);
- if (port->tx_stream)
- pkt_burst_stats_display("TX",
- &port->tx_stream->tx_burst_stats);
-#endif
+ printf("\n %s Forward statistics for port %-2d %s\n",
+ fwd_stats_border, pt_id, fwd_stats_border);
+
+ printf(" RX-packets: %-14"PRIu64" RX-dropped: %-14"PRIu64
+ "RX-total: %-"PRIu64"\n", stats.ipackets, stats.imissed,
+ stats.ipackets + stats.imissed);
+
+ if (cur_fwd_eng == &csum_fwd_engine) {
+ printf(" Bad-ipcsum: %-14"PRIu64
+ " Bad-l4csum: %-14"PRIu64
+ "Bad-outer-l4csum: %-14"PRIu64"\n",
+ ports_stats[pt_id].rx_bad_ip_csum,
+ ports_stats[pt_id].rx_bad_l4_csum,
+ ports_stats[pt_id].rx_bad_outer_l4_csum);
+ printf(" Bad-outer-ipcsum: %-14"PRIu64"\n",
+ ports_stats[pt_id].rx_bad_outer_ip_csum);
+ }
+ if (stats.ierrors + stats.rx_nombuf > 0) {
+ printf(" RX-error: %-"PRIu64"\n", stats.ierrors);
+ printf(" RX-nombufs: %-14"PRIu64"\n", stats.rx_nombuf);
+ }
- if (port->rx_queue_stats_mapping_enabled) {
- printf("\n");
- for (i = 0; i < RTE_ETHDEV_QUEUE_STAT_CNTRS; i++) {
- printf(" Stats reg %2d RX-packets:%14"PRIu64
- " RX-errors:%14"PRIu64
- " RX-bytes:%14"PRIu64"\n",
- i, stats->q_ipackets[i], stats->q_errors[i], stats->q_ibytes[i]);
+ printf(" TX-packets: %-14"PRIu64" TX-dropped: %-14"PRIu64
+ "TX-total: %-"PRIu64"\n",
+ stats.opackets, ports_stats[pt_id].tx_dropped,
+ stats.opackets + ports_stats[pt_id].tx_dropped);
+
+ if (record_burst_stats) {
+ if (ports_stats[pt_id].rx_stream)
+ pkt_burst_stats_display("RX",
+ &ports_stats[pt_id].rx_stream->rx_burst_stats);
+ if (ports_stats[pt_id].tx_stream)
+ pkt_burst_stats_display("TX",
+ &ports_stats[pt_id].tx_stream->tx_burst_stats);
}
- printf("\n");
+
+ printf(" %s--------------------------------%s\n",
+ fwd_stats_border, fwd_stats_border);
}
- if (port->tx_queue_stats_mapping_enabled) {
- for (i = 0; i < RTE_ETHDEV_QUEUE_STAT_CNTRS; i++) {
- printf(" Stats reg %2d TX-packets:%14"PRIu64
- " TX-bytes:%14"PRIu64"\n",
- i, stats->q_opackets[i], stats->q_obytes[i]);
+
+ printf("\n %s Accumulated forward statistics for all ports"
+ "%s\n",
+ acc_stats_border, acc_stats_border);
+ printf(" RX-packets: %-14"PRIu64" RX-dropped: %-14"PRIu64"RX-total: "
+ "%-"PRIu64"\n"
+ " TX-packets: %-14"PRIu64" TX-dropped: %-14"PRIu64"TX-total: "
+ "%-"PRIu64"\n",
+ total_recv, total_rx_dropped, total_recv + total_rx_dropped,
+ total_xmit, total_tx_dropped, total_xmit + total_tx_dropped);
+ if (total_rx_nombuf > 0)
+ printf(" RX-nombufs: %-14"PRIu64"\n", total_rx_nombuf);
+ printf(" %s++++++++++++++++++++++++++++++++++++++++++++++"
+ "%s\n",
+ acc_stats_border, acc_stats_border);
+ if (record_core_cycles) {
+#define CYC_PER_MHZ 1E6
+ if (total_recv > 0 || total_xmit > 0) {
+ uint64_t total_pkts = 0;
+ if (strcmp(cur_fwd_eng->fwd_mode_name, "txonly") == 0 ||
+ strcmp(cur_fwd_eng->fwd_mode_name, "flowgen") == 0)
+ total_pkts = total_xmit;
+ else
+ total_pkts = total_recv;
+
+ printf("\n CPU cycles/packet=%.2F (total cycles="
+ "%"PRIu64" / total %s packets=%"PRIu64") at %"PRIu64
+ " MHz Clock\n",
+ (double) fwd_cycles / total_pkts,
+ fwd_cycles, cur_fwd_eng->fwd_mode_name, total_pkts,
+ (uint64_t)(rte_get_tsc_hz() / CYC_PER_MHZ));
}
}
-
- printf(" %s--------------------------------%s\n",
- fwd_stats_border, fwd_stats_border);
}
-static void
-fwd_stream_stats_display(streamid_t stream_id)
+void
+fwd_stats_reset(void)
{
- struct fwd_stream *fs;
- static const char *fwd_top_stats_border = "-------";
-
- fs = fwd_streams[stream_id];
- if ((fs->rx_packets == 0) && (fs->tx_packets == 0) &&
- (fs->fwd_dropped == 0))
- return;
- printf("\n %s Forward Stats for RX Port=%2d/Queue=%2d -> "
- "TX Port=%2d/Queue=%2d %s\n",
- fwd_top_stats_border, fs->rx_port, fs->rx_queue,
- fs->tx_port, fs->tx_queue, fwd_top_stats_border);
- printf(" RX-packets: %-14u TX-packets: %-14u TX-dropped: %-14u",
- fs->rx_packets, fs->tx_packets, fs->fwd_dropped);
+ streamid_t sm_id;
+ portid_t pt_id;
+ int i;
- /* if checksum mode */
- if (cur_fwd_eng == &csum_fwd_engine) {
- printf(" RX- bad IP checksum: %-14u Rx- bad L4 checksum: "
- "%-14u\n", fs->rx_bad_ip_csum, fs->rx_bad_l4_csum);
+ for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
+ pt_id = fwd_ports_ids[i];
+ rte_eth_stats_get(pt_id, &ports[pt_id].stats);
+ }
+ for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
+ struct fwd_stream *fs = fwd_streams[sm_id];
+
+ fs->rx_packets = 0;
+ fs->tx_packets = 0;
+ fs->fwd_dropped = 0;
+ fs->rx_bad_ip_csum = 0;
+ fs->rx_bad_l4_csum = 0;
+ fs->rx_bad_outer_l4_csum = 0;
+ fs->rx_bad_outer_ip_csum = 0;
+
+ memset(&fs->rx_burst_stats, 0, sizeof(fs->rx_burst_stats));
+ memset(&fs->tx_burst_stats, 0, sizeof(fs->tx_burst_stats));
+ fs->core_cycles = 0;
}
-
-#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
- pkt_burst_stats_display("RX", &fs->rx_burst_stats);
- pkt_burst_stats_display("TX", &fs->tx_burst_stats);
-#endif
}
static void
struct fwd_stream **fsm;
streamid_t nb_fs;
streamid_t sm_id;
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIB_BITRATESTATS
uint64_t tics_per_1sec;
uint64_t tics_datum;
uint64_t tics_current;
- uint8_t idx_port, cnt_ports;
+ uint16_t i, cnt_ports;
- cnt_ports = rte_eth_dev_count();
+ cnt_ports = nb_ports;
tics_datum = rte_rdtsc();
tics_per_1sec = rte_get_timer_hz();
#endif
do {
for (sm_id = 0; sm_id < nb_fs; sm_id++)
(*pkt_fwd)(fsm[sm_id]);
-#ifdef RTE_LIBRTE_BITRATE
- tics_current = rte_rdtsc();
- if (tics_current - tics_datum >= tics_per_1sec) {
- /* Periodic bitrate calculation */
- for (idx_port = 0; idx_port < cnt_ports; idx_port++)
- rte_stats_bitrate_calc(bitrate_data, idx_port);
- tics_datum = tics_current;
+#ifdef RTE_LIB_BITRATESTATS
+ if (bitrate_enabled != 0 &&
+ bitrate_lcore_id == rte_lcore_id()) {
+ tics_current = rte_rdtsc();
+ if (tics_current - tics_datum >= tics_per_1sec) {
+ /* Periodic bitrate calculation */
+ for (i = 0; i < cnt_ports; i++)
+ rte_stats_bitrate_calc(bitrate_data,
+ ports_ids[i]);
+ tics_datum = tics_current;
+ }
}
#endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
- if (latencystats_lcore_id == rte_lcore_id())
+#ifdef RTE_LIB_LATENCYSTATS
+ if (latencystats_enabled != 0 &&
+ latencystats_lcore_id == rte_lcore_id())
rte_latencystats_update();
#endif
struct rte_port *port;
unsigned int i;
portid_t pt_id;
- streamid_t sm_id;
if (strcmp(cur_fwd_eng->fwd_mode_name, "rxonly") == 0 && !nb_rxq)
rte_exit(EXIT_FAILURE, "rxq are 0, cannot use rxonly fwd mode\n");
return;
}
- if (init_fwd_streams() < 0) {
- printf("Fail from init_fwd_streams()\n");
- return;
- }
if(dcb_test) {
for (i = 0; i < nb_fwd_ports; i++) {
}
test_done = 0;
+ fwd_config_setup();
+
if(!no_flush_rx)
flush_fwd_rx_queues();
- fwd_config_setup();
pkt_fwd_config_display(&cur_fwd_config);
rxtx_config_display();
- for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
- pt_id = fwd_ports_ids[i];
- port = &ports[pt_id];
- rte_eth_stats_get(pt_id, &port->stats);
- port->tx_dropped = 0;
-
- map_port_queue_stats_mapping_registers(pt_id, port);
- }
- for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
- fwd_streams[sm_id]->rx_packets = 0;
- fwd_streams[sm_id]->tx_packets = 0;
- fwd_streams[sm_id]->fwd_dropped = 0;
- fwd_streams[sm_id]->rx_bad_ip_csum = 0;
- fwd_streams[sm_id]->rx_bad_l4_csum = 0;
-
-#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
- memset(&fwd_streams[sm_id]->rx_burst_stats, 0,
- sizeof(fwd_streams[sm_id]->rx_burst_stats));
- memset(&fwd_streams[sm_id]->tx_burst_stats, 0,
- sizeof(fwd_streams[sm_id]->tx_burst_stats));
-#endif
-#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
- fwd_streams[sm_id]->core_cycles = 0;
-#endif
- }
+ fwd_stats_reset();
if (with_tx_first) {
port_fwd_begin = tx_only_engine.port_fwd_begin;
if (port_fwd_begin != NULL) {
void
stop_packet_forwarding(void)
{
- struct rte_eth_stats stats;
- struct rte_port *port;
- port_fwd_end_t port_fwd_end;
+ port_fwd_end_t port_fwd_end;
+ lcoreid_t lc_id;
+ portid_t pt_id;
int i;
- portid_t pt_id;
- streamid_t sm_id;
- lcoreid_t lc_id;
- uint64_t total_recv;
- uint64_t total_xmit;
- uint64_t total_rx_dropped;
- uint64_t total_tx_dropped;
- uint64_t total_rx_nombuf;
- uint64_t tx_dropped;
- uint64_t rx_bad_ip_csum;
- uint64_t rx_bad_l4_csum;
-#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
- uint64_t fwd_cycles;
-#endif
- static const char *acc_stats_border = "+++++++++++++++";
if (test_done) {
printf("Packet forwarding not started\n");
(*port_fwd_end)(pt_id);
}
}
-#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
- fwd_cycles = 0;
-#endif
- for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
- if (cur_fwd_config.nb_fwd_streams >
- cur_fwd_config.nb_fwd_ports) {
- fwd_stream_stats_display(sm_id);
- ports[fwd_streams[sm_id]->tx_port].tx_stream = NULL;
- ports[fwd_streams[sm_id]->rx_port].rx_stream = NULL;
- } else {
- ports[fwd_streams[sm_id]->tx_port].tx_stream =
- fwd_streams[sm_id];
- ports[fwd_streams[sm_id]->rx_port].rx_stream =
- fwd_streams[sm_id];
- }
- tx_dropped = ports[fwd_streams[sm_id]->tx_port].tx_dropped;
- tx_dropped = (uint64_t) (tx_dropped +
- fwd_streams[sm_id]->fwd_dropped);
- ports[fwd_streams[sm_id]->tx_port].tx_dropped = tx_dropped;
-
- rx_bad_ip_csum =
- ports[fwd_streams[sm_id]->rx_port].rx_bad_ip_csum;
- rx_bad_ip_csum = (uint64_t) (rx_bad_ip_csum +
- fwd_streams[sm_id]->rx_bad_ip_csum);
- ports[fwd_streams[sm_id]->rx_port].rx_bad_ip_csum =
- rx_bad_ip_csum;
-
- rx_bad_l4_csum =
- ports[fwd_streams[sm_id]->rx_port].rx_bad_l4_csum;
- rx_bad_l4_csum = (uint64_t) (rx_bad_l4_csum +
- fwd_streams[sm_id]->rx_bad_l4_csum);
- ports[fwd_streams[sm_id]->rx_port].rx_bad_l4_csum =
- rx_bad_l4_csum;
-
-#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
- fwd_cycles = (uint64_t) (fwd_cycles +
- fwd_streams[sm_id]->core_cycles);
-#endif
- }
- total_recv = 0;
- total_xmit = 0;
- total_rx_dropped = 0;
- total_tx_dropped = 0;
- total_rx_nombuf = 0;
- for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
- pt_id = fwd_ports_ids[i];
- port = &ports[pt_id];
- rte_eth_stats_get(pt_id, &stats);
- stats.ipackets -= port->stats.ipackets;
- port->stats.ipackets = 0;
- stats.opackets -= port->stats.opackets;
- port->stats.opackets = 0;
- stats.ibytes -= port->stats.ibytes;
- port->stats.ibytes = 0;
- stats.obytes -= port->stats.obytes;
- port->stats.obytes = 0;
- stats.imissed -= port->stats.imissed;
- port->stats.imissed = 0;
- stats.oerrors -= port->stats.oerrors;
- port->stats.oerrors = 0;
- stats.rx_nombuf -= port->stats.rx_nombuf;
- port->stats.rx_nombuf = 0;
-
- total_recv += stats.ipackets;
- total_xmit += stats.opackets;
- total_rx_dropped += stats.imissed;
- total_tx_dropped += port->tx_dropped;
- total_rx_nombuf += stats.rx_nombuf;
+ fwd_stats_display();
- fwd_port_stats_display(pt_id, &stats);
- }
- printf("\n %s Accumulated forward statistics for all ports"
- "%s\n",
- acc_stats_border, acc_stats_border);
- printf(" RX-packets: %-14"PRIu64" RX-dropped: %-14"PRIu64"RX-total: "
- "%-"PRIu64"\n"
- " TX-packets: %-14"PRIu64" TX-dropped: %-14"PRIu64"TX-total: "
- "%-"PRIu64"\n",
- total_recv, total_rx_dropped, total_recv + total_rx_dropped,
- total_xmit, total_tx_dropped, total_xmit + total_tx_dropped);
- if (total_rx_nombuf > 0)
- printf(" RX-nombufs: %-14"PRIu64"\n", total_rx_nombuf);
- printf(" %s++++++++++++++++++++++++++++++++++++++++++++++"
- "%s\n",
- acc_stats_border, acc_stats_border);
-#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
- if (total_recv > 0)
- printf("\n CPU cycles/packet=%u (total cycles="
- "%"PRIu64" / total RX packets=%"PRIu64")\n",
- (unsigned int)(fwd_cycles / total_recv),
- fwd_cycles, total_recv);
-#endif
printf("\nDone.\n");
test_done = 1;
}
void
dev_set_link_up(portid_t pid)
{
- if (rte_eth_dev_set_link_up((uint8_t)pid) < 0)
+ if (rte_eth_dev_set_link_up(pid) < 0)
printf("\nSet link up fail.\n");
}
void
dev_set_link_down(portid_t pid)
{
- if (rte_eth_dev_set_link_down((uint8_t)pid) < 0)
+ if (rte_eth_dev_set_link_down(pid) < 0)
printf("\nSet link down fail.\n");
}
portid_t pi;
struct rte_port *port;
- FOREACH_PORT(pi, ports) {
+ RTE_ETH_FOREACH_DEV(pi) {
port = &ports[pi];
/* Check if there is a port which is not started */
if ((port->port_status != RTE_PORT_STARTED) &&
return 1;
}
+int
+port_is_stopped(portid_t port_id)
+{
+ struct rte_port *port = &ports[port_id];
+
+ if ((port->port_status != RTE_PORT_STOPPED) &&
+ (port->slave_flag == 0))
+ return 0;
+ return 1;
+}
+
int
all_ports_stopped(void)
{
portid_t pi;
- struct rte_port *port;
- FOREACH_PORT(pi, ports) {
- port = &ports[pi];
- if ((port->port_status != RTE_PORT_STOPPED) &&
- (port->slave_flag == 0))
+ RTE_ETH_FOREACH_DEV(pi) {
+ if (!port_is_stopped(pi))
return 0;
}
return 1;
}
+/* Configure the Rx and Tx hairpin queues for the selected port. */
static int
-port_is_closed(portid_t port_id)
+setup_hairpin_queues(portid_t pi, portid_t p_pi, uint16_t cnt_pi)
{
- if (port_id_is_invalid(port_id, ENABLED_WARN))
- return 0;
+ queueid_t qi;
+ struct rte_eth_hairpin_conf hairpin_conf = {
+ .peer_count = 1,
+ };
+ int i;
+ int diag;
+ struct rte_port *port = &ports[pi];
+ uint16_t peer_rx_port = pi;
+ uint16_t peer_tx_port = pi;
+ uint32_t manual = 1;
+ uint32_t tx_exp = hairpin_mode & 0x10;
+
+ if (!(hairpin_mode & 0xf)) {
+ peer_rx_port = pi;
+ peer_tx_port = pi;
+ manual = 0;
+ } else if (hairpin_mode & 0x1) {
+ peer_tx_port = rte_eth_find_next_owned_by(pi + 1,
+ RTE_ETH_DEV_NO_OWNER);
+ if (peer_tx_port >= RTE_MAX_ETHPORTS)
+ peer_tx_port = rte_eth_find_next_owned_by(0,
+ RTE_ETH_DEV_NO_OWNER);
+ if (p_pi != RTE_MAX_ETHPORTS) {
+ peer_rx_port = p_pi;
+ } else {
+ uint16_t next_pi;
- if (ports[port_id].port_status != RTE_PORT_CLOSED)
- return 0;
+ /* Last port will be the peer RX port of the first. */
+ RTE_ETH_FOREACH_DEV(next_pi)
+ peer_rx_port = next_pi;
+ }
+ manual = 1;
+ } else if (hairpin_mode & 0x2) {
+ if (cnt_pi & 0x1) {
+ peer_rx_port = p_pi;
+ } else {
+ peer_rx_port = rte_eth_find_next_owned_by(pi + 1,
+ RTE_ETH_DEV_NO_OWNER);
+ if (peer_rx_port >= RTE_MAX_ETHPORTS)
+ peer_rx_port = pi;
+ }
+ peer_tx_port = peer_rx_port;
+ manual = 1;
+ }
- return 1;
+ for (qi = nb_txq, i = 0; qi < nb_hairpinq + nb_txq; qi++) {
+ hairpin_conf.peers[0].port = peer_rx_port;
+ hairpin_conf.peers[0].queue = i + nb_rxq;
+ hairpin_conf.manual_bind = !!manual;
+ hairpin_conf.tx_explicit = !!tx_exp;
+ diag = rte_eth_tx_hairpin_queue_setup
+ (pi, qi, nb_txd, &hairpin_conf);
+ i++;
+ if (diag == 0)
+ continue;
+
+ /* Fail to setup rx queue, return */
+ if (rte_atomic16_cmpset(&(port->port_status),
+ RTE_PORT_HANDLING,
+ RTE_PORT_STOPPED) == 0)
+ printf("Port %d can not be set back "
+ "to stopped\n", pi);
+ printf("Fail to configure port %d hairpin "
+ "queues\n", pi);
+ /* try to reconfigure queues next time */
+ port->need_reconfig_queues = 1;
+ return -1;
+ }
+ for (qi = nb_rxq, i = 0; qi < nb_hairpinq + nb_rxq; qi++) {
+ hairpin_conf.peers[0].port = peer_tx_port;
+ hairpin_conf.peers[0].queue = i + nb_txq;
+ hairpin_conf.manual_bind = !!manual;
+ hairpin_conf.tx_explicit = !!tx_exp;
+ diag = rte_eth_rx_hairpin_queue_setup
+ (pi, qi, nb_rxd, &hairpin_conf);
+ i++;
+ if (diag == 0)
+ continue;
+
+ /* Fail to setup rx queue, return */
+ if (rte_atomic16_cmpset(&(port->port_status),
+ RTE_PORT_HANDLING,
+ RTE_PORT_STOPPED) == 0)
+ printf("Port %d can not be set back "
+ "to stopped\n", pi);
+ printf("Fail to configure port %d hairpin "
+ "queues\n", pi);
+ /* try to reconfigure queues next time */
+ port->need_reconfig_queues = 1;
+ return -1;
+ }
+ return 0;
+}
+
+/* Configure the Rx with optional split. */
+int
+rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
+ uint16_t nb_rx_desc, unsigned int socket_id,
+ struct rte_eth_rxconf *rx_conf, struct rte_mempool *mp)
+{
+ union rte_eth_rxseg rx_useg[MAX_SEGS_BUFFER_SPLIT] = {};
+ unsigned int i, mp_n;
+ int ret;
+
+ if (rx_pkt_nb_segs <= 1 ||
+ (rx_conf->offloads & RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT) == 0) {
+ rx_conf->rx_seg = NULL;
+ rx_conf->rx_nseg = 0;
+ ret = rte_eth_rx_queue_setup(port_id, rx_queue_id,
+ nb_rx_desc, socket_id,
+ rx_conf, mp);
+ return ret;
+ }
+ for (i = 0; i < rx_pkt_nb_segs; i++) {
+ struct rte_eth_rxseg_split *rx_seg = &rx_useg[i].split;
+ struct rte_mempool *mpx;
+ /*
+ * Use last valid pool for the segments with number
+ * exceeding the pool index.
+ */
+ mp_n = (i > mbuf_data_size_n) ? mbuf_data_size_n - 1 : i;
+ mpx = mbuf_pool_find(socket_id, mp_n);
+ /* Handle zero as mbuf data buffer size. */
+ rx_seg->length = rx_pkt_seg_lengths[i] ?
+ rx_pkt_seg_lengths[i] :
+ mbuf_data_size[mp_n];
+ rx_seg->offset = i < rx_pkt_nb_offs ?
+ rx_pkt_seg_offsets[i] : 0;
+ rx_seg->mp = mpx ? mpx : mp;
+ }
+ rx_conf->rx_nseg = rx_pkt_nb_segs;
+ rx_conf->rx_seg = rx_useg;
+ ret = rte_eth_rx_queue_setup(port_id, rx_queue_id, nb_rx_desc,
+ socket_id, rx_conf, NULL);
+ rx_conf->rx_seg = NULL;
+ rx_conf->rx_nseg = 0;
+ return ret;
}
int
{
int diag, need_check_link_status = -1;
portid_t pi;
+ portid_t p_pi = RTE_MAX_ETHPORTS;
+ portid_t pl[RTE_MAX_ETHPORTS];
+ portid_t peer_pl[RTE_MAX_ETHPORTS];
+ uint16_t cnt_pi = 0;
+ uint16_t cfg_pi = 0;
+ int peer_pi;
queueid_t qi;
struct rte_port *port;
- struct ether_addr mac_addr;
+ struct rte_ether_addr mac_addr;
+ struct rte_eth_hairpin_cap cap;
if (port_id_is_invalid(pid, ENABLED_WARN))
return 0;
if(dcb_config)
dcb_test = 1;
- FOREACH_PORT(pi, ports) {
+ RTE_ETH_FOREACH_DEV(pi) {
if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
continue;
if (port->need_reconfig > 0) {
port->need_reconfig = 0;
+ if (flow_isolate_all) {
+ int ret = port_flow_isolate(pi, 1);
+ if (ret) {
+ printf("Failed to apply isolated"
+ " mode on port %d\n", pi);
+ return -1;
+ }
+ }
+ configure_rxtx_dump_callbacks(0);
printf("Configuring Port %d (socket %u)\n", pi,
port->socket_id);
+ if (nb_hairpinq > 0 &&
+ rte_eth_dev_hairpin_capability_get(pi, &cap)) {
+ printf("Port %d doesn't support hairpin "
+ "queues\n", pi);
+ return -1;
+ }
/* configure port */
- diag = rte_eth_dev_configure(pi, nb_rxq, nb_txq,
- &(port->dev_conf));
+ diag = rte_eth_dev_configure(pi, nb_rxq + nb_hairpinq,
+ nb_txq + nb_hairpinq,
+ &(port->dev_conf));
if (diag != 0) {
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
if ((numa_support) &&
(txring_numa[pi] != NUMA_NO_CONFIG))
diag = rte_eth_tx_queue_setup(pi, qi,
- nb_txd,txring_numa[pi],
- &(port->tx_conf));
+ port->nb_tx_desc[qi],
+ txring_numa[pi],
+ &(port->tx_conf[qi]));
else
diag = rte_eth_tx_queue_setup(pi, qi,
- nb_txd,port->socket_id,
- &(port->tx_conf));
+ port->nb_tx_desc[qi],
+ port->socket_id,
+ &(port->tx_conf[qi]));
if (diag == 0)
continue;
RTE_PORT_STOPPED) == 0)
printf("Port %d can not be set back "
"to stopped\n", pi);
- printf("Fail to configure port %d tx queues\n", pi);
+ printf("Fail to configure port %d tx queues\n",
+ pi);
/* try to reconfigure queues next time */
port->need_reconfig_queues = 1;
return -1;
}
- /* setup rx queues */
for (qi = 0; qi < nb_rxq; qi++) {
+ /* setup rx queues */
if ((numa_support) &&
(rxring_numa[pi] != NUMA_NO_CONFIG)) {
struct rte_mempool * mp =
- mbuf_pool_find(rxring_numa[pi]);
+ mbuf_pool_find
+ (rxring_numa[pi], 0);
if (mp == NULL) {
printf("Failed to setup RX queue:"
"No mempool allocation"
return -1;
}
- diag = rte_eth_rx_queue_setup(pi, qi,
- nb_rxd,rxring_numa[pi],
- &(port->rx_conf),mp);
+ diag = rx_queue_setup(pi, qi,
+ port->nb_rx_desc[qi],
+ rxring_numa[pi],
+ &(port->rx_conf[qi]),
+ mp);
} else {
struct rte_mempool *mp =
- mbuf_pool_find(port->socket_id);
+ mbuf_pool_find
+ (port->socket_id, 0);
if (mp == NULL) {
printf("Failed to setup RX queue:"
"No mempool allocation"
port->socket_id);
return -1;
}
- diag = rte_eth_rx_queue_setup(pi, qi,
- nb_rxd,port->socket_id,
- &(port->rx_conf), mp);
+ diag = rx_queue_setup(pi, qi,
+ port->nb_rx_desc[qi],
+ port->socket_id,
+ &(port->rx_conf[qi]),
+ mp);
}
if (diag == 0)
continue;
RTE_PORT_STOPPED) == 0)
printf("Port %d can not be set back "
"to stopped\n", pi);
- printf("Fail to configure port %d rx queues\n", pi);
+ printf("Fail to configure port %d rx queues\n",
+ pi);
/* try to reconfigure queues next time */
port->need_reconfig_queues = 1;
return -1;
}
+ /* setup hairpin queues */
+ if (setup_hairpin_queues(pi, p_pi, cnt_pi) != 0)
+ return -1;
}
+ configure_rxtx_dump_callbacks(verbose_level);
+ if (clear_ptypes) {
+ diag = rte_eth_dev_set_ptypes(pi, RTE_PTYPE_UNKNOWN,
+ NULL, 0);
+ if (diag < 0)
+ printf(
+ "Port %d: Failed to disable Ptype parsing\n",
+ pi);
+ }
+
+ p_pi = pi;
+ cnt_pi++;
+
/* start port */
if (rte_eth_dev_start(pi) < 0) {
printf("Fail to start port %d\n", pi);
RTE_PORT_HANDLING, RTE_PORT_STARTED) == 0)
printf("Port %d can not be set into started\n", pi);
- rte_eth_macaddr_get(pi, &mac_addr);
- printf("Port %d: %02X:%02X:%02X:%02X:%02X:%02X\n", pi,
+ if (eth_macaddr_get_print_err(pi, &mac_addr) == 0)
+ printf("Port %d: %02X:%02X:%02X:%02X:%02X:%02X\n", pi,
mac_addr.addr_bytes[0], mac_addr.addr_bytes[1],
mac_addr.addr_bytes[2], mac_addr.addr_bytes[3],
mac_addr.addr_bytes[4], mac_addr.addr_bytes[5]);
/* at least one port started, need checking link status */
need_check_link_status = 1;
+
+ pl[cfg_pi++] = pi;
}
if (need_check_link_status == 1 && !no_link_check)
else if (need_check_link_status == 0)
printf("Please stop the ports first\n");
+ if (hairpin_mode & 0xf) {
+ uint16_t i;
+ int j;
+
+ /* bind all started hairpin ports */
+ for (i = 0; i < cfg_pi; i++) {
+ pi = pl[i];
+ /* bind current Tx to all peer Rx */
+ peer_pi = rte_eth_hairpin_get_peer_ports(pi, peer_pl,
+ RTE_MAX_ETHPORTS, 1);
+ if (peer_pi < 0)
+ return peer_pi;
+ for (j = 0; j < peer_pi; j++) {
+ if (!port_is_started(peer_pl[j]))
+ continue;
+ diag = rte_eth_hairpin_bind(pi, peer_pl[j]);
+ if (diag < 0) {
+ printf("Error during binding hairpin"
+ " Tx port %u to %u: %s\n",
+ pi, peer_pl[j],
+ rte_strerror(-diag));
+ return -1;
+ }
+ }
+ /* bind all peer Tx to current Rx */
+ peer_pi = rte_eth_hairpin_get_peer_ports(pi, peer_pl,
+ RTE_MAX_ETHPORTS, 0);
+ if (peer_pi < 0)
+ return peer_pi;
+ for (j = 0; j < peer_pi; j++) {
+ if (!port_is_started(peer_pl[j]))
+ continue;
+ diag = rte_eth_hairpin_bind(peer_pl[j], pi);
+ if (diag < 0) {
+ printf("Error during binding hairpin"
+ " Tx port %u to %u: %s\n",
+ peer_pl[j], pi,
+ rte_strerror(-diag));
+ return -1;
+ }
+ }
+ }
+ }
+
printf("Done\n");
return 0;
}
void
-stop_port(portid_t pid)
+stop_port(portid_t pid)
+{
+ portid_t pi;
+ struct rte_port *port;
+ int need_check_link_status = 0;
+ portid_t peer_pl[RTE_MAX_ETHPORTS];
+ int peer_pi;
+
+ if (dcb_test) {
+ dcb_test = 0;
+ dcb_config = 0;
+ }
+
+ if (port_id_is_invalid(pid, ENABLED_WARN))
+ return;
+
+ printf("Stopping ports...\n");
+
+ RTE_ETH_FOREACH_DEV(pi) {
+ if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
+ continue;
+
+ if (port_is_forwarding(pi) != 0 && test_done == 0) {
+ printf("Please remove port %d from forwarding configuration.\n", pi);
+ continue;
+ }
+
+ if (port_is_bonding_slave(pi)) {
+ printf("Please remove port %d from bonded device.\n", pi);
+ continue;
+ }
+
+ port = &ports[pi];
+ if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STARTED,
+ RTE_PORT_HANDLING) == 0)
+ continue;
+
+ if (hairpin_mode & 0xf) {
+ int j;
+
+ rte_eth_hairpin_unbind(pi, RTE_MAX_ETHPORTS);
+ /* unbind all peer Tx from current Rx */
+ peer_pi = rte_eth_hairpin_get_peer_ports(pi, peer_pl,
+ RTE_MAX_ETHPORTS, 0);
+ if (peer_pi < 0)
+ continue;
+ for (j = 0; j < peer_pi; j++) {
+ if (!port_is_started(peer_pl[j]))
+ continue;
+ rte_eth_hairpin_unbind(peer_pl[j], pi);
+ }
+ }
+
+ if (port->flow_list)
+ port_flow_flush(pi);
+
+ if (rte_eth_dev_stop(pi) != 0)
+ RTE_LOG(ERR, EAL, "rte_eth_dev_stop failed for port %u\n",
+ pi);
+
+ if (rte_atomic16_cmpset(&(port->port_status),
+ RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
+ printf("Port %d can not be set into stopped\n", pi);
+ need_check_link_status = 1;
+ }
+ if (need_check_link_status && !no_link_check)
+ check_all_ports_link_status(RTE_PORT_ALL);
+
+ printf("Done\n");
+}
+
+static void
+remove_invalid_ports_in(portid_t *array, portid_t *total)
+{
+ portid_t i;
+ portid_t new_total = 0;
+
+ for (i = 0; i < *total; i++)
+ if (!port_id_is_invalid(array[i], DISABLED_WARN)) {
+ array[new_total] = array[i];
+ new_total++;
+ }
+ *total = new_total;
+}
+
+static void
+remove_invalid_ports(void)
+{
+ remove_invalid_ports_in(ports_ids, &nb_ports);
+ remove_invalid_ports_in(fwd_ports_ids, &nb_fwd_ports);
+ nb_cfg_ports = nb_fwd_ports;
+}
+
+void
+close_port(portid_t pid)
{
portid_t pi;
struct rte_port *port;
- int need_check_link_status = 0;
-
- if (dcb_test) {
- dcb_test = 0;
- dcb_config = 0;
- }
if (port_id_is_invalid(pid, ENABLED_WARN))
return;
- printf("Stopping ports...\n");
+ printf("Closing ports...\n");
- FOREACH_PORT(pi, ports) {
+ RTE_ETH_FOREACH_DEV(pi) {
if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
continue;
}
port = &ports[pi];
- if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STARTED,
- RTE_PORT_HANDLING) == 0)
+ if (rte_atomic16_cmpset(&(port->port_status),
+ RTE_PORT_CLOSED, RTE_PORT_CLOSED) == 1) {
+ printf("Port %d is already closed\n", pi);
continue;
+ }
- rte_eth_dev_stop(pi);
-
- if (rte_atomic16_cmpset(&(port->port_status),
- RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
- printf("Port %d can not be set into stopped\n", pi);
- need_check_link_status = 1;
+ port_flow_flush(pi);
+ rte_eth_dev_close(pi);
}
- if (need_check_link_status && !no_link_check)
- check_all_ports_link_status(RTE_PORT_ALL);
+ remove_invalid_ports();
printf("Done\n");
}
void
-close_port(portid_t pid)
+reset_port(portid_t pid)
{
+ int diag;
portid_t pi;
struct rte_port *port;
if (port_id_is_invalid(pid, ENABLED_WARN))
return;
- printf("Closing ports...\n");
+ if ((pid == (portid_t)RTE_PORT_ALL && !all_ports_stopped()) ||
+ (pid != (portid_t)RTE_PORT_ALL && !port_is_stopped(pid))) {
+ printf("Can not reset port(s), please stop port(s) first.\n");
+ return;
+ }
+
+ printf("Resetting ports...\n");
- FOREACH_PORT(pi, ports) {
+ RTE_ETH_FOREACH_DEV(pi) {
if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
continue;
if (port_is_forwarding(pi) != 0 && test_done == 0) {
- printf("Please remove port %d from forwarding configuration.\n", pi);
+ printf("Please remove port %d from forwarding "
+ "configuration.\n", pi);
continue;
}
if (port_is_bonding_slave(pi)) {
- printf("Please remove port %d from bonded device.\n", pi);
+ printf("Please remove port %d from bonded device.\n",
+ pi);
continue;
}
- port = &ports[pi];
- if (rte_atomic16_cmpset(&(port->port_status),
- RTE_PORT_CLOSED, RTE_PORT_CLOSED) == 1) {
- printf("Port %d is already closed\n", pi);
- continue;
- }
-
- if (rte_atomic16_cmpset(&(port->port_status),
- RTE_PORT_STOPPED, RTE_PORT_HANDLING) == 0) {
- printf("Port %d is now not stopped\n", pi);
- continue;
+ diag = rte_eth_dev_reset(pi);
+ if (diag == 0) {
+ port = &ports[pi];
+ port->need_reconfig = 1;
+ port->need_reconfig_queues = 1;
+ } else {
+ printf("Failed to reset port %d. diag=%d\n", pi, diag);
}
-
- if (port->flow_list)
- port_flow_flush(pi);
- rte_eth_dev_close(pi);
-
- if (rte_atomic16_cmpset(&(port->port_status),
- RTE_PORT_HANDLING, RTE_PORT_CLOSED) == 0)
- printf("Port %d cannot be set to closed\n", pi);
}
printf("Done\n");
void
attach_port(char *identifier)
{
- portid_t pi = 0;
- unsigned int socket_id;
+ portid_t pi;
+ struct rte_dev_iterator iterator;
printf("Attaching a new port...\n");
return;
}
- if (rte_eth_dev_attach(identifier, &pi))
+ if (rte_dev_probe(identifier) < 0) {
+ TESTPMD_LOG(ERR, "Failed to attach port %s\n", identifier);
+ return;
+ }
+
+ /* first attach mode: event */
+ if (setup_on_probe_event) {
+ /* new ports are detected on RTE_ETH_EVENT_NEW event */
+ for (pi = 0; pi < RTE_MAX_ETHPORTS; pi++)
+ if (ports[pi].port_status == RTE_PORT_HANDLING &&
+ ports[pi].need_setup != 0)
+ setup_attached_port(pi);
return;
+ }
+
+ /* second attach mode: iterator */
+ RTE_ETH_FOREACH_MATCHING_DEV(pi, identifier, &iterator) {
+ /* setup ports matching the devargs used for probing */
+ if (port_is_forwarding(pi))
+ continue; /* port was already attached before */
+ setup_attached_port(pi);
+ }
+}
+
+static void
+setup_attached_port(portid_t pi)
+{
+ unsigned int socket_id;
+ int ret;
- ports[pi].enabled = 1;
socket_id = (unsigned)rte_eth_dev_socket_id(pi);
- /* if socket_id is invalid, set to 0 */
+ /* if socket_id is invalid, set to the first available socket. */
if (check_socket_id(socket_id) < 0)
- socket_id = 0;
+ socket_id = socket_ids[0];
reconfig(pi, socket_id);
- rte_eth_promiscuous_enable(pi);
-
- nb_ports = rte_eth_dev_count();
-
+ ret = rte_eth_promiscuous_enable(pi);
+ if (ret != 0)
+ printf("Error during enabling promiscuous mode for port %u: %s - ignore\n",
+ pi, rte_strerror(-ret));
+
+ ports_ids[nb_ports++] = pi;
+ fwd_ports_ids[nb_fwd_ports++] = pi;
+ nb_cfg_ports = nb_fwd_ports;
+ ports[pi].need_setup = 0;
ports[pi].port_status = RTE_PORT_STOPPED;
printf("Port %d is attached. Now total ports is %d\n", pi, nb_ports);
printf("Done\n");
}
+static void
+detach_device(struct rte_device *dev)
+{
+ portid_t sibling;
+
+ if (dev == NULL) {
+ printf("Device already removed\n");
+ return;
+ }
+
+ printf("Removing a device...\n");
+
+ RTE_ETH_FOREACH_DEV_OF(sibling, dev) {
+ if (ports[sibling].port_status != RTE_PORT_CLOSED) {
+ if (ports[sibling].port_status != RTE_PORT_STOPPED) {
+ printf("Port %u not stopped\n", sibling);
+ return;
+ }
+ port_flow_flush(sibling);
+ }
+ }
+
+ if (rte_dev_remove(dev) < 0) {
+ TESTPMD_LOG(ERR, "Failed to detach device %s\n", dev->name);
+ return;
+ }
+ remove_invalid_ports();
+
+ printf("Device is detached\n");
+ printf("Now total ports is %d\n", nb_ports);
+ printf("Done\n");
+ return;
+}
+
+void
+detach_port_device(portid_t port_id)
+{
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
+ return;
+
+ if (ports[port_id].port_status != RTE_PORT_CLOSED) {
+ if (ports[port_id].port_status != RTE_PORT_STOPPED) {
+ printf("Port not stopped\n");
+ return;
+ }
+ printf("Port was not closed\n");
+ }
+
+ detach_device(rte_eth_devices[port_id].device);
+}
+
void
-detach_port(uint8_t port_id)
+detach_devargs(char *identifier)
{
- char name[RTE_ETH_NAME_MAX_LEN];
+ struct rte_dev_iterator iterator;
+ struct rte_devargs da;
+ portid_t port_id;
- printf("Detaching a port...\n");
+ printf("Removing a device...\n");
- if (!port_is_closed(port_id)) {
- printf("Please close port first\n");
+ memset(&da, 0, sizeof(da));
+ if (rte_devargs_parsef(&da, "%s", identifier)) {
+ printf("cannot parse identifier\n");
+ if (da.args)
+ free(da.args);
return;
}
- if (ports[port_id].flow_list)
- port_flow_flush(port_id);
+ RTE_ETH_FOREACH_MATCHING_DEV(port_id, identifier, &iterator) {
+ if (ports[port_id].port_status != RTE_PORT_CLOSED) {
+ if (ports[port_id].port_status != RTE_PORT_STOPPED) {
+ printf("Port %u not stopped\n", port_id);
+ rte_eth_iterator_cleanup(&iterator);
+ return;
+ }
+ port_flow_flush(port_id);
+ }
+ }
- if (rte_eth_dev_detach(port_id, name))
+ if (rte_eal_hotplug_remove(da.bus->name, da.name) != 0) {
+ TESTPMD_LOG(ERR, "Failed to detach device %s(%s)\n",
+ da.name, da.bus->name);
return;
+ }
- ports[port_id].enabled = 0;
- nb_ports = rte_eth_dev_count();
+ remove_invalid_ports();
- printf("Port '%s' is detached. Now total ports is %d\n",
- name, nb_ports);
+ printf("Device %s is detached\n", identifier);
+ printf("Now total ports is %d\n", nb_ports);
printf("Done\n");
- return;
}
void
pmd_test_exit(void)
{
portid_t pt_id;
+ unsigned int i;
+ int ret;
if (test_done == 0)
stop_packet_forwarding();
+ for (i = 0 ; i < RTE_DIM(mempools) ; i++) {
+ if (mempools[i]) {
+ if (mp_alloc_type == MP_ALLOC_ANON)
+ rte_mempool_mem_iter(mempools[i], dma_unmap_cb,
+ NULL);
+ }
+ }
if (ports != NULL) {
no_link_check = 1;
- FOREACH_PORT(pt_id, ports) {
- printf("\nShutting down port %d...\n", pt_id);
+ RTE_ETH_FOREACH_DEV(pt_id) {
+ printf("\nStopping port %d...\n", pt_id);
fflush(stdout);
stop_port(pt_id);
+ }
+ RTE_ETH_FOREACH_DEV(pt_id) {
+ printf("\nShutting down port %d...\n", pt_id);
+ fflush(stdout);
close_port(pt_id);
}
}
+
+ if (hot_plug) {
+ ret = rte_dev_event_monitor_stop();
+ if (ret) {
+ RTE_LOG(ERR, EAL,
+ "fail to stop device event monitor.");
+ return;
+ }
+
+ ret = rte_dev_event_callback_unregister(NULL,
+ dev_event_callback, NULL);
+ if (ret < 0) {
+ RTE_LOG(ERR, EAL,
+ "fail to unregister device event callback.\n");
+ return;
+ }
+
+ ret = rte_dev_hotplug_handle_disable();
+ if (ret) {
+ RTE_LOG(ERR, EAL,
+ "fail to disable hotplug handling.\n");
+ return;
+ }
+ }
+ for (i = 0 ; i < RTE_DIM(mempools) ; i++) {
+ if (mempools[i])
+ rte_mempool_free(mempools[i]);
+ }
+
printf("\nBye...\n");
}
cmd_func_t cmd_func;
};
-#define PMD_TEST_CMD_NB (sizeof(pmd_test_menu) / sizeof(pmd_test_menu[0]))
-
/* Check the link status of all ports in up to 9s, and print them finally */
static void
check_all_ports_link_status(uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
- uint8_t portid, count, all_ports_up, print_flag = 0;
+ portid_t portid;
+ uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
+ int ret;
+ char link_status[RTE_ETH_LINK_MAX_STR_LEN];
printf("Checking link statuses...\n");
fflush(stdout);
for (count = 0; count <= MAX_CHECK_TIME; count++) {
all_ports_up = 1;
- FOREACH_PORT(portid, ports) {
+ RTE_ETH_FOREACH_DEV(portid) {
if ((port_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
- rte_eth_link_get_nowait(portid, &link);
+ ret = rte_eth_link_get_nowait(portid, &link);
+ if (ret < 0) {
+ all_ports_up = 0;
+ if (print_flag == 1)
+ printf("Port %u link get failed: %s\n",
+ portid, rte_strerror(-ret));
+ continue;
+ }
/* print link status if flag set */
if (print_flag == 1) {
- if (link.link_status)
- printf("Port %d Link Up - speed %u "
- "Mbps - %s\n", (uint8_t)portid,
- (unsigned)link.link_speed,
- (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
- else
- printf("Port %d Link Down\n",
- (uint8_t)portid);
+ rte_eth_link_to_str(link_status,
+ sizeof(link_status), &link);
+ printf("Port %d %s\n", portid, link_status);
continue;
}
/* clear all_ports_up flag if any link down */
if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
print_flag = 1;
}
+
+ if (lsc_interrupt)
+ break;
+ }
+}
+
+static void
+rmv_port_callback(void *arg)
+{
+ int need_to_start = 0;
+ int org_no_link_check = no_link_check;
+ portid_t port_id = (intptr_t)arg;
+ struct rte_device *dev;
+
+ RTE_ETH_VALID_PORTID_OR_RET(port_id);
+
+ if (!test_done && port_is_forwarding(port_id)) {
+ need_to_start = 1;
+ stop_packet_forwarding();
}
+ no_link_check = 1;
+ stop_port(port_id);
+ no_link_check = org_no_link_check;
+
+ /* Save rte_device pointer before closing ethdev port */
+ dev = rte_eth_devices[port_id].device;
+ close_port(port_id);
+ detach_device(dev); /* might be already removed or have more ports */
+
+ if (need_to_start)
+ start_packet_forwarding(0);
}
+/* This function is used by the interrupt thread */
static int
-set_tx_queue_stats_mapping_registers(uint8_t port_id, struct rte_port *port)
+eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
+ void *ret_param)
{
- uint16_t i;
- int diag;
- uint8_t mapping_found = 0;
-
- for (i = 0; i < nb_tx_queue_stats_mappings; i++) {
- if ((tx_queue_stats_mappings[i].port_id == port_id) &&
- (tx_queue_stats_mappings[i].queue_id < nb_txq )) {
- diag = rte_eth_dev_set_tx_queue_stats_mapping(port_id,
- tx_queue_stats_mappings[i].queue_id,
- tx_queue_stats_mappings[i].stats_counter_id);
- if (diag != 0)
- return diag;
- mapping_found = 1;
- }
+ RTE_SET_USED(param);
+ RTE_SET_USED(ret_param);
+
+ if (type >= RTE_ETH_EVENT_MAX) {
+ fprintf(stderr, "\nPort %" PRIu16 ": %s called upon invalid event %d\n",
+ port_id, __func__, type);
+ fflush(stderr);
+ } else if (event_print_mask & (UINT32_C(1) << type)) {
+ printf("\nPort %" PRIu16 ": %s event\n", port_id,
+ eth_event_desc[type]);
+ fflush(stdout);
+ }
+
+ switch (type) {
+ case RTE_ETH_EVENT_NEW:
+ ports[port_id].need_setup = 1;
+ ports[port_id].port_status = RTE_PORT_HANDLING;
+ break;
+ case RTE_ETH_EVENT_INTR_RMV:
+ if (port_id_is_invalid(port_id, DISABLED_WARN))
+ break;
+ if (rte_eal_alarm_set(100000,
+ rmv_port_callback, (void *)(intptr_t)port_id))
+ fprintf(stderr, "Could not set up deferred device removal\n");
+ break;
+ case RTE_ETH_EVENT_DESTROY:
+ ports[port_id].port_status = RTE_PORT_CLOSED;
+ printf("Port %u is closed\n", port_id);
+ break;
+ default:
+ break;
}
- if (mapping_found)
- port->tx_queue_stats_mapping_enabled = 1;
return 0;
}
static int
-set_rx_queue_stats_mapping_registers(uint8_t port_id, struct rte_port *port)
+register_eth_event_callback(void)
{
- uint16_t i;
- int diag;
- uint8_t mapping_found = 0;
-
- for (i = 0; i < nb_rx_queue_stats_mappings; i++) {
- if ((rx_queue_stats_mappings[i].port_id == port_id) &&
- (rx_queue_stats_mappings[i].queue_id < nb_rxq )) {
- diag = rte_eth_dev_set_rx_queue_stats_mapping(port_id,
- rx_queue_stats_mappings[i].queue_id,
- rx_queue_stats_mappings[i].stats_counter_id);
- if (diag != 0)
- return diag;
- mapping_found = 1;
+ int ret;
+ enum rte_eth_event_type event;
+
+ for (event = RTE_ETH_EVENT_UNKNOWN;
+ event < RTE_ETH_EVENT_MAX; event++) {
+ ret = rte_eth_dev_callback_register(RTE_ETH_ALL,
+ event,
+ eth_event_callback,
+ NULL);
+ if (ret != 0) {
+ TESTPMD_LOG(ERR, "Failed to register callback for "
+ "%s event\n", eth_event_desc[event]);
+ return -1;
}
}
- if (mapping_found)
- port->rx_queue_stats_mapping_enabled = 1;
+
return 0;
}
+/* This function is used by the interrupt thread */
static void
-map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port)
+dev_event_callback(const char *device_name, enum rte_dev_event_type type,
+ __rte_unused void *arg)
{
- int diag = 0;
+ uint16_t port_id;
+ int ret;
- diag = set_tx_queue_stats_mapping_registers(pi, port);
- if (diag != 0) {
- if (diag == -ENOTSUP) {
- port->tx_queue_stats_mapping_enabled = 0;
- printf("TX queue stats mapping not supported port id=%d\n", pi);
- }
- else
- rte_exit(EXIT_FAILURE,
- "set_tx_queue_stats_mapping_registers "
- "failed for port id=%d diag=%d\n",
- pi, diag);
+ if (type >= RTE_DEV_EVENT_MAX) {
+ fprintf(stderr, "%s called upon invalid event %d\n",
+ __func__, type);
+ fflush(stderr);
}
- diag = set_rx_queue_stats_mapping_registers(pi, port);
- if (diag != 0) {
- if (diag == -ENOTSUP) {
- port->rx_queue_stats_mapping_enabled = 0;
- printf("RX queue stats mapping not supported port id=%d\n", pi);
+ switch (type) {
+ case RTE_DEV_EVENT_REMOVE:
+ RTE_LOG(DEBUG, EAL, "The device: %s has been removed!\n",
+ device_name);
+ ret = rte_eth_dev_get_port_by_name(device_name, &port_id);
+ if (ret) {
+ RTE_LOG(ERR, EAL, "can not get port by device %s!\n",
+ device_name);
+ return;
}
- else
- rte_exit(EXIT_FAILURE,
- "set_rx_queue_stats_mapping_registers "
- "failed for port id=%d diag=%d\n",
- pi, diag);
+ /*
+ * Because the user's callback is invoked in eal interrupt
+ * callback, the interrupt callback need to be finished before
+ * it can be unregistered when detaching device. So finish
+ * callback soon and use a deferred removal to detach device
+ * is need. It is a workaround, once the device detaching be
+ * moved into the eal in the future, the deferred removal could
+ * be deleted.
+ */
+ if (rte_eal_alarm_set(100000,
+ rmv_port_callback, (void *)(intptr_t)port_id))
+ RTE_LOG(ERR, EAL,
+ "Could not set up deferred device removal\n");
+ break;
+ case RTE_DEV_EVENT_ADD:
+ RTE_LOG(ERR, EAL, "The device: %s has been added!\n",
+ device_name);
+ /* TODO: After finish kernel driver binding,
+ * begin to attach port.
+ */
+ break;
+ default:
+ break;
}
}
static void
rxtx_port_config(struct rte_port *port)
{
- port->rx_conf = port->dev_info.default_rxconf;
- port->tx_conf = port->dev_info.default_txconf;
+ uint16_t qid;
+ uint64_t offloads;
+
+ for (qid = 0; qid < nb_rxq; qid++) {
+ offloads = port->rx_conf[qid].offloads;
+ port->rx_conf[qid] = port->dev_info.default_rxconf;
+ if (offloads != 0)
+ port->rx_conf[qid].offloads = offloads;
+
+ /* Check if any Rx parameters have been passed */
+ if (rx_pthresh != RTE_PMD_PARAM_UNSET)
+ port->rx_conf[qid].rx_thresh.pthresh = rx_pthresh;
+
+ if (rx_hthresh != RTE_PMD_PARAM_UNSET)
+ port->rx_conf[qid].rx_thresh.hthresh = rx_hthresh;
+
+ if (rx_wthresh != RTE_PMD_PARAM_UNSET)
+ port->rx_conf[qid].rx_thresh.wthresh = rx_wthresh;
+
+ if (rx_free_thresh != RTE_PMD_PARAM_UNSET)
+ port->rx_conf[qid].rx_free_thresh = rx_free_thresh;
+
+ if (rx_drop_en != RTE_PMD_PARAM_UNSET)
+ port->rx_conf[qid].rx_drop_en = rx_drop_en;
- /* Check if any RX/TX parameters have been passed */
- if (rx_pthresh != RTE_PMD_PARAM_UNSET)
- port->rx_conf.rx_thresh.pthresh = rx_pthresh;
+ port->nb_rx_desc[qid] = nb_rxd;
+ }
+
+ for (qid = 0; qid < nb_txq; qid++) {
+ offloads = port->tx_conf[qid].offloads;
+ port->tx_conf[qid] = port->dev_info.default_txconf;
+ if (offloads != 0)
+ port->tx_conf[qid].offloads = offloads;
+
+ /* Check if any Tx parameters have been passed */
+ if (tx_pthresh != RTE_PMD_PARAM_UNSET)
+ port->tx_conf[qid].tx_thresh.pthresh = tx_pthresh;
+
+ if (tx_hthresh != RTE_PMD_PARAM_UNSET)
+ port->tx_conf[qid].tx_thresh.hthresh = tx_hthresh;
- if (rx_hthresh != RTE_PMD_PARAM_UNSET)
- port->rx_conf.rx_thresh.hthresh = rx_hthresh;
+ if (tx_wthresh != RTE_PMD_PARAM_UNSET)
+ port->tx_conf[qid].tx_thresh.wthresh = tx_wthresh;
+
+ if (tx_rs_thresh != RTE_PMD_PARAM_UNSET)
+ port->tx_conf[qid].tx_rs_thresh = tx_rs_thresh;
+
+ if (tx_free_thresh != RTE_PMD_PARAM_UNSET)
+ port->tx_conf[qid].tx_free_thresh = tx_free_thresh;
+
+ port->nb_tx_desc[qid] = nb_txd;
+ }
+}
- if (rx_wthresh != RTE_PMD_PARAM_UNSET)
- port->rx_conf.rx_thresh.wthresh = rx_wthresh;
+/*
+ * Helper function to arrange max_rx_pktlen value and JUMBO_FRAME offload,
+ * MTU is also aligned if JUMBO_FRAME offload is not set.
+ *
+ * port->dev_info should be set before calling this function.
+ *
+ * return 0 on success, negative on error
+ */
+int
+update_jumbo_frame_offload(portid_t portid)
+{
+ struct rte_port *port = &ports[portid];
+ uint32_t eth_overhead;
+ uint64_t rx_offloads;
+ int ret;
+ bool on;
+
+ /* Update the max_rx_pkt_len to have MTU as RTE_ETHER_MTU */
+ if (port->dev_info.max_mtu != UINT16_MAX &&
+ port->dev_info.max_rx_pktlen > port->dev_info.max_mtu)
+ eth_overhead = port->dev_info.max_rx_pktlen -
+ port->dev_info.max_mtu;
+ else
+ eth_overhead = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
- if (rx_free_thresh != RTE_PMD_PARAM_UNSET)
- port->rx_conf.rx_free_thresh = rx_free_thresh;
+ rx_offloads = port->dev_conf.rxmode.offloads;
- if (rx_drop_en != RTE_PMD_PARAM_UNSET)
- port->rx_conf.rx_drop_en = rx_drop_en;
+ /* Default config value is 0 to use PMD specific overhead */
+ if (port->dev_conf.rxmode.max_rx_pkt_len == 0)
+ port->dev_conf.rxmode.max_rx_pkt_len = RTE_ETHER_MTU + eth_overhead;
- if (tx_pthresh != RTE_PMD_PARAM_UNSET)
- port->tx_conf.tx_thresh.pthresh = tx_pthresh;
+ if (port->dev_conf.rxmode.max_rx_pkt_len <= RTE_ETHER_MTU + eth_overhead) {
+ rx_offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
+ on = false;
+ } else {
+ if ((port->dev_info.rx_offload_capa & DEV_RX_OFFLOAD_JUMBO_FRAME) == 0) {
+ printf("Frame size (%u) is not supported by port %u\n",
+ port->dev_conf.rxmode.max_rx_pkt_len,
+ portid);
+ return -1;
+ }
+ rx_offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+ on = true;
+ }
- if (tx_hthresh != RTE_PMD_PARAM_UNSET)
- port->tx_conf.tx_thresh.hthresh = tx_hthresh;
+ if (rx_offloads != port->dev_conf.rxmode.offloads) {
+ uint16_t qid;
- if (tx_wthresh != RTE_PMD_PARAM_UNSET)
- port->tx_conf.tx_thresh.wthresh = tx_wthresh;
+ port->dev_conf.rxmode.offloads = rx_offloads;
- if (tx_rs_thresh != RTE_PMD_PARAM_UNSET)
- port->tx_conf.tx_rs_thresh = tx_rs_thresh;
+ /* Apply JUMBO_FRAME offload configuration to Rx queue(s) */
+ for (qid = 0; qid < port->dev_info.nb_rx_queues; qid++) {
+ if (on)
+ port->rx_conf[qid].offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+ else
+ port->rx_conf[qid].offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
+ }
+ }
- if (tx_free_thresh != RTE_PMD_PARAM_UNSET)
- port->tx_conf.tx_free_thresh = tx_free_thresh;
+ /* If JUMBO_FRAME is set MTU conversion done by ethdev layer,
+ * if unset do it here
+ */
+ if ((rx_offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) == 0) {
+ ret = rte_eth_dev_set_mtu(portid,
+ port->dev_conf.rxmode.max_rx_pkt_len - eth_overhead);
+ if (ret)
+ printf("Failed to set MTU to %u for port %u\n",
+ port->dev_conf.rxmode.max_rx_pkt_len - eth_overhead,
+ portid);
+ }
- if (txq_flags != RTE_PMD_PARAM_UNSET)
- port->tx_conf.txq_flags = txq_flags;
+ return 0;
}
void
{
portid_t pid;
struct rte_port *port;
+ int ret;
- FOREACH_PORT(pid, ports) {
+ RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
- port->dev_conf.rxmode = rx_mode;
port->dev_conf.fdir_conf = fdir_conf;
+
+ ret = eth_dev_info_get_print_err(pid, &port->dev_info);
+ if (ret != 0)
+ return;
+
if (nb_rxq > 1) {
port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
- port->dev_conf.rx_adv_conf.rss_conf.rss_hf = rss_hf;
+ port->dev_conf.rx_adv_conf.rss_conf.rss_hf =
+ rss_hf & port->dev_info.flow_type_rss_offloads;
} else {
port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
port->dev_conf.rx_adv_conf.rss_conf.rss_hf = 0;
if (port->dcb_flag == 0) {
if( port->dev_conf.rx_adv_conf.rss_conf.rss_hf != 0)
- port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_RSS;
+ port->dev_conf.rxmode.mq_mode =
+ (enum rte_eth_rx_mq_mode)
+ (rx_mq_mode & ETH_MQ_RX_RSS);
else
port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_NONE;
}
rxtx_port_config(port);
- rte_eth_macaddr_get(pid, &port->eth_addr);
+ ret = eth_macaddr_get_print_err(pid, &port->eth_addr);
+ if (ret != 0)
+ return;
- map_port_queue_stats_mapping_registers(pid, port);
-#ifdef RTE_NIC_BYPASS
- rte_eth_dev_bypass_init(pid);
+#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS
+ rte_pmd_ixgbe_bypass_init(pid);
#endif
+
+ if (lsc_interrupt &&
+ (rte_eth_devices[pid].data->dev_flags &
+ RTE_ETH_DEV_INTR_LSC))
+ port->dev_conf.intr_conf.lsc = 1;
+ if (rmv_interrupt &&
+ (rte_eth_devices[pid].data->dev_flags &
+ RTE_ETH_DEV_INTR_RMV))
+ port->dev_conf.intr_conf.rmv = 1;
}
}
struct rte_port *port;
port = &ports[slave_pid];
- return port->slave_flag;
+ if ((rte_eth_devices[slave_pid].data->dev_flags &
+ RTE_ETH_DEV_BONDED_SLAVE) || (port->slave_flag == 1))
+ return 1;
+ return 0;
}
const uint16_t vlan_tags[] = {
};
static int
-get_eth_dcb_conf(struct rte_eth_conf *eth_conf,
+get_eth_dcb_conf(portid_t pid, struct rte_eth_conf *eth_conf,
enum dcb_mode_enable dcb_mode,
enum rte_eth_nb_tcs num_tcs,
uint8_t pfc_en)
{
uint8_t i;
+ int32_t rc;
+ struct rte_eth_rss_conf rss_conf;
/*
* Builds up the correct configuration for dcb+vt based on the vlan tags array
1 << (i % vmdq_rx_conf->nb_queue_pools);
}
for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
- vmdq_rx_conf->dcb_tc[i] = i;
- vmdq_tx_conf->dcb_tc[i] = i;
+ vmdq_rx_conf->dcb_tc[i] = i % num_tcs;
+ vmdq_tx_conf->dcb_tc[i] = i % num_tcs;
}
/* set DCB mode of RX and TX of multiple queues */
- eth_conf->rxmode.mq_mode = ETH_MQ_RX_VMDQ_DCB;
+ eth_conf->rxmode.mq_mode =
+ (enum rte_eth_rx_mq_mode)
+ (rx_mq_mode & ETH_MQ_RX_VMDQ_DCB);
eth_conf->txmode.mq_mode = ETH_MQ_TX_VMDQ_DCB;
} else {
struct rte_eth_dcb_rx_conf *rx_conf =
struct rte_eth_dcb_tx_conf *tx_conf =
ð_conf->tx_adv_conf.dcb_tx_conf;
+ memset(&rss_conf, 0, sizeof(struct rte_eth_rss_conf));
+
+ rc = rte_eth_dev_rss_hash_conf_get(pid, &rss_conf);
+ if (rc != 0)
+ return rc;
+
rx_conf->nb_tcs = num_tcs;
tx_conf->nb_tcs = num_tcs;
rx_conf->dcb_tc[i] = i % num_tcs;
tx_conf->dcb_tc[i] = i % num_tcs;
}
- eth_conf->rxmode.mq_mode = ETH_MQ_RX_DCB_RSS;
- eth_conf->rx_adv_conf.rss_conf.rss_hf = rss_hf;
+
+ eth_conf->rxmode.mq_mode =
+ (enum rte_eth_rx_mq_mode)
+ (rx_mq_mode & ETH_MQ_RX_DCB_RSS);
+ eth_conf->rx_adv_conf.rss_conf = rss_conf;
eth_conf->txmode.mq_mode = ETH_MQ_TX_DCB;
}
/* Enter DCB configuration status */
dcb_config = 1;
+ port_conf.rxmode = rte_port->dev_conf.rxmode;
+ port_conf.txmode = rte_port->dev_conf.txmode;
+
/*set configuration of DCB in vt mode and DCB in non-vt mode*/
- retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
+ retval = get_eth_dcb_conf(pid, &port_conf, dcb_mode, num_tcs, pfc_en);
if (retval < 0)
return retval;
- port_conf.rxmode.hw_vlan_filter = 1;
+ port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
- /**
- * Write the configuration into the device.
- * Set the numbers of RX & TX queues to 0, so
- * the RX & TX queues will not be setup.
- */
- (void)rte_eth_dev_configure(pid, 0, 0, &port_conf);
+ /* re-configure the device . */
+ retval = rte_eth_dev_configure(pid, nb_rxq, nb_rxq, &port_conf);
+ if (retval < 0)
+ return retval;
- rte_eth_dev_info_get(pid, &rte_port->dev_info);
+ retval = eth_dev_info_get_print_err(pid, &rte_port->dev_info);
+ if (retval != 0)
+ return retval;
/* If dev_info.vmdq_pool_base is greater than 0,
* the queue id of vmdq pools is started after pf queues.
rxtx_port_config(rte_port);
/* VLAN filter */
- rte_port->dev_conf.rxmode.hw_vlan_filter = 1;
+ rte_port->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
for (i = 0; i < RTE_DIM(vlan_tags); i++)
rx_vft_set(pid, vlan_tags[i], 1);
- rte_eth_macaddr_get(pid, &rte_port->eth_addr);
- map_port_queue_stats_mapping_registers(pid, rte_port);
+ retval = eth_macaddr_get_print_err(pid, &rte_port->eth_addr);
+ if (retval != 0)
+ return retval;
rte_port->dcb_flag = 1;
static void
init_port(void)
{
- portid_t pid;
+ int i;
/* Configuration of Ethernet ports. */
ports = rte_zmalloc("testpmd: ports",
"rte_zmalloc(%d struct rte_port) failed\n",
RTE_MAX_ETHPORTS);
}
-
- /* enabled allocated ports */
- for (pid = 0; pid < nb_ports; pid++)
- ports[pid].enabled = 1;
+ for (i = 0; i < RTE_MAX_ETHPORTS; i++)
+ LIST_INIT(&ports[i].flow_tunnel_list);
+ /* Initialize ports NUMA structures */
+ memset(port_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
+ memset(rxring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
+ memset(txring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
}
static void
prompt_exit();
}
+static void
+print_stats(void)
+{
+ uint8_t i;
+ const char clr[] = { 27, '[', '2', 'J', '\0' };
+ const char top_left[] = { 27, '[', '1', ';', '1', 'H', '\0' };
+
+ /* Clear screen and move to top left */
+ printf("%s%s", clr, top_left);
+
+ printf("\nPort statistics ====================================");
+ for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
+ nic_stats_display(fwd_ports_ids[i]);
+
+ fflush(stdout);
+}
+
static void
signal_handler(int signum)
{
if (signum == SIGINT || signum == SIGTERM) {
printf("\nSignal %d received, preparing to exit...\n",
signum);
-#ifdef RTE_LIBRTE_PDUMP
+#ifdef RTE_LIB_PDUMP
/* uninitialize packet capture framework */
rte_pdump_uninit();
#endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
- rte_latencystats_uninit();
+#ifdef RTE_LIB_LATENCYSTATS
+ if (latencystats_enabled != 0)
+ rte_latencystats_uninit();
#endif
force_quit();
+ /* Set flag to indicate the force termination. */
+ f_quit = 1;
/* exit with the expected status */
signal(signum, SIG_DFL);
kill(getpid(), signum);
int
main(int argc, char** argv)
{
- int diag;
- uint8_t port_id;
+ int diag;
+ portid_t port_id;
+ uint16_t count;
+ int ret;
signal(SIGINT, signal_handler);
signal(SIGTERM, signal_handler);
+ testpmd_logtype = rte_log_register("testpmd");
+ if (testpmd_logtype < 0)
+ rte_exit(EXIT_FAILURE, "Cannot register log type");
+ rte_log_set_level(testpmd_logtype, RTE_LOG_DEBUG);
+
diag = rte_eal_init(argc, argv);
if (diag < 0)
- rte_panic("Cannot init EAL\n");
+ rte_exit(EXIT_FAILURE, "Cannot init EAL: %s\n",
+ rte_strerror(rte_errno));
+
+ if (rte_eal_process_type() == RTE_PROC_SECONDARY)
+ rte_exit(EXIT_FAILURE,
+ "Secondary process type not supported.\n");
-#ifdef RTE_LIBRTE_PDUMP
+ ret = register_eth_event_callback();
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE, "Cannot register for ethdev events");
+
+#ifdef RTE_LIB_PDUMP
/* initialize packet capture framework */
- rte_pdump_init(NULL);
+ rte_pdump_init();
#endif
- nb_ports = (portid_t) rte_eth_dev_count();
+ count = 0;
+ RTE_ETH_FOREACH_DEV(port_id) {
+ ports_ids[count] = port_id;
+ count++;
+ }
+ nb_ports = (portid_t) count;
if (nb_ports == 0)
- RTE_LOG(WARNING, EAL, "No probed ethernet devices\n");
+ TESTPMD_LOG(WARNING, "No probed ethernet devices\n");
/* allocate port structures, and init them */
init_port();
set_def_fwd_config();
if (nb_lcores == 0)
- rte_panic("Empty set of forwarding logical cores - check the "
- "core mask supplied in the command parameters\n");
+ rte_exit(EXIT_FAILURE, "No cores defined for forwarding\n"
+ "Check the core mask argument\n");
+
+ /* Bitrate/latency stats disabled by default */
+#ifdef RTE_LIB_BITRATESTATS
+ bitrate_enabled = 0;
+#endif
+#ifdef RTE_LIB_LATENCYSTATS
+ latencystats_enabled = 0;
+#endif
+
+ /* on FreeBSD, mlockall() is disabled by default */
+#ifdef RTE_EXEC_ENV_FREEBSD
+ do_mlockall = 0;
+#else
+ do_mlockall = 1;
+#endif
argc -= diag;
argv += diag;
if (argc > 1)
launch_args_parse(argc, argv);
+ if (do_mlockall && mlockall(MCL_CURRENT | MCL_FUTURE)) {
+ TESTPMD_LOG(NOTICE, "mlockall() failed with error \"%s\"\n",
+ strerror(errno));
+ }
+
+ if (tx_first && interactive)
+ rte_exit(EXIT_FAILURE, "--tx-first cannot be used on "
+ "interactive mode.\n");
+
+ if (tx_first && lsc_interrupt) {
+ printf("Warning: lsc_interrupt needs to be off when "
+ " using tx_first. Disabling.\n");
+ lsc_interrupt = 0;
+ }
+
if (!nb_rxq && !nb_txq)
printf("Warning: Either rx or tx queues should be non-zero\n");
nb_rxq, nb_txq);
init_config();
- if (start_port(RTE_PORT_ALL) != 0)
+
+ if (hot_plug) {
+ ret = rte_dev_hotplug_handle_enable();
+ if (ret) {
+ RTE_LOG(ERR, EAL,
+ "fail to enable hotplug handling.");
+ return -1;
+ }
+
+ ret = rte_dev_event_monitor_start();
+ if (ret) {
+ RTE_LOG(ERR, EAL,
+ "fail to start device event monitoring.");
+ return -1;
+ }
+
+ ret = rte_dev_event_callback_register(NULL,
+ dev_event_callback, NULL);
+ if (ret) {
+ RTE_LOG(ERR, EAL,
+ "fail to register device event callback\n");
+ return -1;
+ }
+ }
+
+ if (!no_device_start && start_port(RTE_PORT_ALL) != 0)
rte_exit(EXIT_FAILURE, "Start ports failed\n");
/* set all ports to promiscuous mode by default */
- FOREACH_PORT(port_id, ports)
- rte_eth_promiscuous_enable(port_id);
+ RTE_ETH_FOREACH_DEV(port_id) {
+ ret = rte_eth_promiscuous_enable(port_id);
+ if (ret != 0)
+ printf("Error during enabling promiscuous mode for port %u: %s - ignore\n",
+ port_id, rte_strerror(-ret));
+ }
/* Init metrics library */
rte_metrics_init(rte_socket_id());
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
if (latencystats_enabled != 0) {
int ret = rte_latencystats_init(1, NULL);
if (ret)
#endif
/* Setup bitrate stats */
-#ifdef RTE_LIBRTE_BITRATE
- bitrate_data = rte_stats_bitrate_create();
- if (bitrate_data == NULL)
- rte_exit(EXIT_FAILURE, "Could not allocate bitrate data.\n");
- rte_stats_bitrate_reg(bitrate_data);
+#ifdef RTE_LIB_BITRATESTATS
+ if (bitrate_enabled != 0) {
+ bitrate_data = rte_stats_bitrate_create();
+ if (bitrate_data == NULL)
+ rte_exit(EXIT_FAILURE,
+ "Could not allocate bitrate data.\n");
+ rte_stats_bitrate_reg(bitrate_data);
+ }
#endif
+#ifdef RTE_LIB_CMDLINE
+ if (strlen(cmdline_filename) != 0)
+ cmdline_read_from_file(cmdline_filename);
-#ifdef RTE_LIBRTE_CMDLINE
if (interactive == 1) {
if (auto_start) {
printf("Start automatic packet forwarding\n");
start_packet_forwarding(0);
}
prompt();
+ pmd_test_exit();
} else
#endif
{
char c;
int rc;
+ f_quit = 0;
+
printf("No commandline core given, start packet forwarding\n");
- start_packet_forwarding(0);
+ start_packet_forwarding(tx_first);
+ if (stats_period != 0) {
+ uint64_t prev_time = 0, cur_time, diff_time = 0;
+ uint64_t timer_period;
+
+ /* Convert to number of cycles */
+ timer_period = stats_period * rte_get_timer_hz();
+
+ while (f_quit == 0) {
+ cur_time = rte_get_timer_cycles();
+ diff_time += cur_time - prev_time;
+
+ if (diff_time >= timer_period) {
+ print_stats();
+ /* Reset the timer */
+ diff_time = 0;
+ }
+ /* Sleep to avoid unnecessary checks */
+ prev_time = cur_time;
+ sleep(1);
+ }
+ }
+
printf("Press enter to exit\n");
rc = read(0, &c, 1);
pmd_test_exit();
return 1;
}
- return 0;
+ ret = rte_eal_cleanup();
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "EAL cleanup failed: %s\n", strerror(-ret));
+
+ return EXIT_SUCCESS;
}