#include <rte_ethdev.h>
#include <rte_dev.h>
#include <rte_string_fns.h>
+#ifdef RTE_LIBRTE_IXGBE_PMD
+#include <rte_pmd_ixgbe.h>
+#endif
#ifdef RTE_LIBRTE_PMD_XENVIRT
#include <rte_eth_xenvirt.h>
#endif
#ifdef RTE_LIBRTE_BITRATE
#include <rte_bitrate.h>
#endif
-#include <rte_metrics.h>
#ifdef RTE_LIBRTE_LATENCY_STATS
#include <rte_latencystats.h>
#endif
+#include <rte_gro.h>
#include "testpmd.h"
/* use master core for command line ? */
uint8_t interactive = 0;
uint8_t auto_start = 0;
+uint8_t tx_first;
+char cmdline_filename[PATH_MAX] = {0};
/*
* NUMA support configuration.
* probed ports among the CPU sockets 0 and 1.
* Otherwise, all memory is allocated from CPU socket 0.
*/
-uint8_t numa_support = 0; /**< No numa support by default */
+uint8_t numa_support = 1; /**< numa enabled by default */
/*
* In UMA mode,all memory is allocated from socket 0 if --socket-num is
uint16_t mbuf_data_size = DEFAULT_MBUF_DATA_SIZE; /**< Mbuf data space size. */
uint32_t param_total_num_mbufs = 0; /**< number of mbufs in all pools - if
* specified on command-line. */
-
+uint16_t stats_period; /**< Period to show statistics (disabled by default) */
/*
* Configuration of packet segments used by the "txonly" processing engine.
*/
*/
uint8_t no_flush_rx = 0; /* flush by default */
+/*
+ * Flow API isolated mode.
+ */
+uint8_t flow_isolate_all;
+
/*
* Avoids to check link status when starting/stopping a port.
*/
*/
uint8_t rmv_interrupt = 1; /* enabled by default */
+/*
+ * Display or mask ether events
+ * Default to all events except VF_MBOX
+ */
+uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) |
+ (UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC) |
+ (UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE) |
+ (UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) |
+ (UINT32_C(1) << RTE_ETH_EVENT_MACSEC) |
+ (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV);
+
/*
* NIC bypass mode configuration options.
*/
-#ifdef RTE_NIC_BYPASS
+#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS
/* The NIC bypass watchdog timeout. */
-uint32_t bypass_timeout = RTE_BYPASS_TMT_OFF;
-
+uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
#endif
+
#ifdef RTE_LIBRTE_LATENCY_STATS
/*
uint16_t nb_tx_queue_stats_mappings = 0;
uint16_t nb_rx_queue_stats_mappings = 0;
-unsigned max_socket = 0;
+unsigned int num_sockets = 0;
+unsigned int socket_ids[RTE_MAX_NUMA_NODES];
+#ifdef RTE_LIBRTE_BITRATE
/* Bitrate statistics */
struct rte_stats_bitrates *bitrate_data;
+lcoreid_t bitrate_lcore_id;
+uint8_t bitrate_enabled;
+#endif
+
+struct gro_status gro_ports[RTE_MAX_ETHPORTS];
/* Forward function declarations */
static void map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port);
static void check_all_ports_link_status(uint32_t port_mask);
-static void eth_event_callback(uint8_t port_id,
- enum rte_eth_event_type type,
- void *param);
+static int eth_event_callback(uint8_t port_id,
+ enum rte_eth_event_type type,
+ void *param, void *ret_param);
/*
* Check if all the ports are started.
*/
static int all_ports_started(void);
+/*
+ * Helper function to check if socket is already discovered.
+ * If yes, return positive value. If not, return zero.
+ */
+int
+new_socket_id(unsigned int socket_id)
+{
+ unsigned int i;
+
+ for (i = 0; i < num_sockets; i++) {
+ if (socket_ids[i] == socket_id)
+ return 0;
+ }
+ return 1;
+}
+
/*
* Setup default configuration.
*/
nb_lc = 0;
for (i = 0; i < RTE_MAX_LCORE; i++) {
- sock_num = rte_lcore_to_socket_id(i) + 1;
- if (sock_num > max_socket) {
- if (sock_num > RTE_MAX_NUMA_NODES)
- rte_exit(EXIT_FAILURE, "Total sockets greater than %u\n", RTE_MAX_NUMA_NODES);
- max_socket = sock_num;
+ sock_num = rte_lcore_to_socket_id(i);
+ if (new_socket_id(sock_num)) {
+ if (num_sockets >= RTE_MAX_NUMA_NODES) {
+ rte_exit(EXIT_FAILURE,
+ "Total sockets greater than %u\n",
+ RTE_MAX_NUMA_NODES);
+ }
+ socket_ids[num_sockets++] = sock_num;
}
if (!rte_lcore_is_enabled(i))
continue;
{
static int warning_once = 0;
- if (socket_id >= max_socket) {
+ if (new_socket_id(socket_id)) {
if (!warning_once && numa_support)
printf("Warning: NUMA should be configured manually by"
" using --port-numa-config and"
uint8_t port_per_socket[RTE_MAX_NUMA_NODES];
memset(port_per_socket,0,RTE_MAX_NUMA_NODES);
+
+ if (numa_support) {
+ memset(port_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
+ memset(rxring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
+ memset(txring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
+ }
+
/* Configuration of logical cores. */
fwd_lcores = rte_zmalloc("testpmd: fwd_lcores",
sizeof(struct fwd_lcore *) * nb_lcores,
fwd_lcores[lc_id]->cpuid_idx = lc_id;
}
- /*
- * Create pools of mbuf.
- * If NUMA support is disabled, create a single pool of mbuf in
- * socket 0 memory by default.
- * Otherwise, create a pool of mbuf in the memory of sockets 0 and 1.
- *
- * Use the maximum value of nb_rxd and nb_txd here, then nb_rxd and
- * nb_txd can be configured at run time.
- */
- if (param_total_num_mbufs)
- nb_mbuf_per_pool = param_total_num_mbufs;
- else {
- nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX + (nb_lcores * mb_mempool_cache)
- + RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
-
- if (!numa_support)
- nb_mbuf_per_pool =
- (nb_mbuf_per_pool * RTE_MAX_ETHPORTS);
- }
-
- if (!numa_support) {
- if (socket_num == UMA_NO_CONFIG)
- mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool, 0);
- else
- mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
- socket_num);
- }
-
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
rte_eth_dev_info_get(pid, &port->dev_info);
port->need_reconfig_queues = 1;
}
+ /*
+ * Create pools of mbuf.
+ * If NUMA support is disabled, create a single pool of mbuf in
+ * socket 0 memory by default.
+ * Otherwise, create a pool of mbuf in the memory of sockets 0 and 1.
+ *
+ * Use the maximum value of nb_rxd and nb_txd here, then nb_rxd and
+ * nb_txd can be configured at run time.
+ */
+ if (param_total_num_mbufs)
+ nb_mbuf_per_pool = param_total_num_mbufs;
+ else {
+ nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX +
+ (nb_lcores * mb_mempool_cache) +
+ RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
+ nb_mbuf_per_pool *= RTE_MAX_ETHPORTS;
+ }
+
if (numa_support) {
uint8_t i;
- unsigned int nb_mbuf;
-
- if (param_total_num_mbufs)
- nb_mbuf_per_pool = nb_mbuf_per_pool/nb_ports;
- for (i = 0; i < max_socket; i++) {
- nb_mbuf = (nb_mbuf_per_pool * RTE_MAX_ETHPORTS);
- if (nb_mbuf)
- mbuf_pool_create(mbuf_data_size,
- nb_mbuf,i);
- }
+ for (i = 0; i < num_sockets; i++)
+ mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
+ socket_ids[i]);
+ } else {
+ if (socket_num == UMA_NO_CONFIG)
+ mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool, 0);
+ else
+ mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
+ socket_num);
}
+
init_port_config();
/*
for (sm_id = 0; sm_id < nb_fs; sm_id++)
(*pkt_fwd)(fsm[sm_id]);
#ifdef RTE_LIBRTE_BITRATE
- tics_current = rte_rdtsc();
- if (tics_current - tics_datum >= tics_per_1sec) {
- /* Periodic bitrate calculation */
- for (idx_port = 0; idx_port < cnt_ports; idx_port++)
- rte_stats_bitrate_calc(bitrate_data, idx_port);
- tics_datum = tics_current;
+ if (bitrate_enabled != 0 &&
+ bitrate_lcore_id == rte_lcore_id()) {
+ tics_current = rte_rdtsc();
+ if (tics_current - tics_datum >= tics_per_1sec) {
+ /* Periodic bitrate calculation */
+ for (idx_port = 0;
+ idx_port < cnt_ports;
+ idx_port++)
+ rte_stats_bitrate_calc(bitrate_data,
+ idx_port);
+ tics_datum = tics_current;
+ }
}
#endif
#ifdef RTE_LIBRTE_LATENCY_STATS
- if (latencystats_lcore_id == rte_lcore_id())
+ if (latencystats_enabled != 0 &&
+ latencystats_lcore_id == rte_lcore_id())
rte_latencystats_update();
#endif
if (port->need_reconfig > 0) {
port->need_reconfig = 0;
+ if (flow_isolate_all) {
+ int ret = port_flow_isolate(pi, 1);
+ if (ret) {
+ printf("Failed to apply isolated"
+ " mode on port %d\n", pi);
+ return -1;
+ }
+ }
+
printf("Configuring Port %d (socket %u)\n", pi,
port->socket_id);
/* configure port */
if (ports[port_id].flow_list)
port_flow_flush(port_id);
- if (rte_eth_dev_detach(port_id, name))
+ if (rte_eth_dev_detach(port_id, name)) {
+ RTE_LOG(ERR, USER1, "Failed to detach port '%s'\n", name);
return;
+ }
nb_ports = rte_eth_dev_count();
rmv_event_callback(void *arg)
{
struct rte_eth_dev *dev;
- struct rte_devargs *da;
- char name[32] = "";
uint8_t port_id = (intptr_t)arg;
RTE_ETH_VALID_PORTID_OR_RET(port_id);
dev = &rte_eth_devices[port_id];
- da = dev->device->devargs;
stop_port(port_id);
close_port(port_id);
- if (da->type == RTE_DEVTYPE_VIRTUAL)
- snprintf(name, sizeof(name), "%s", da->virt.drv_name);
- else if (da->type == RTE_DEVTYPE_WHITELISTED_PCI)
- rte_eal_pci_device_name(&da->pci.addr, name, sizeof(name));
- printf("removing device %s\n", name);
- rte_eal_dev_detach(name);
- dev->state = RTE_ETH_DEV_UNUSED;
+ printf("removing device %s\n", dev->device->name);
+ if (rte_eal_dev_detach(dev->device))
+ RTE_LOG(ERR, USER1, "Failed to detach device %s\n",
+ dev->device->name);
}
/* This function is used by the interrupt thread */
-static void
-eth_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param)
+static int
+eth_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param,
+ void *ret_param)
{
static const char * const event_desc[] = {
[RTE_ETH_EVENT_UNKNOWN] = "Unknown",
};
RTE_SET_USED(param);
+ RTE_SET_USED(ret_param);
if (type >= RTE_ETH_EVENT_MAX) {
fprintf(stderr, "\nPort %" PRIu8 ": %s called upon invalid event %d\n",
port_id, __func__, type);
fflush(stderr);
- } else {
+ } else if (event_print_mask & (UINT32_C(1) << type)) {
printf("\nPort %" PRIu8 ": %s event\n", port_id,
event_desc[type]);
fflush(stdout);
default:
break;
}
+ return 0;
}
static int
rte_eth_macaddr_get(pid, &port->eth_addr);
map_port_queue_stats_mapping_registers(pid, port);
-#ifdef RTE_NIC_BYPASS
- rte_eth_dev_bypass_init(pid);
+#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS
+ rte_pmd_ixgbe_bypass_init(pid);
#endif
if (lsc_interrupt &&
prompt_exit();
}
+static void
+print_stats(void)
+{
+ uint8_t i;
+ const char clr[] = { 27, '[', '2', 'J', '\0' };
+ const char top_left[] = { 27, '[', '1', ';', '1', 'H', '\0' };
+
+ /* Clear screen and move to top left */
+ printf("%s%s", clr, top_left);
+
+ printf("\nPort statistics ====================================");
+ for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
+ nic_stats_display(fwd_ports_ids[i]);
+}
+
static void
signal_handler(int signum)
{
rte_panic("Empty set of forwarding logical cores - check the "
"core mask supplied in the command parameters\n");
+ /* Bitrate/latency stats disabled by default */
+#ifdef RTE_LIBRTE_BITRATE
+ bitrate_enabled = 0;
+#endif
+#ifdef RTE_LIBRTE_LATENCY_STATS
+ latencystats_enabled = 0;
+#endif
+
argc -= diag;
argv += diag;
if (argc > 1)
launch_args_parse(argc, argv);
+ if (tx_first && interactive)
+ rte_exit(EXIT_FAILURE, "--tx-first cannot be used on "
+ "interactive mode.\n");
if (!nb_rxq && !nb_txq)
printf("Warning: Either rx or tx queues should be non-zero\n");
/* Setup bitrate stats */
#ifdef RTE_LIBRTE_BITRATE
- bitrate_data = rte_stats_bitrate_create();
- if (bitrate_data == NULL)
- rte_exit(EXIT_FAILURE, "Could not allocate bitrate data.\n");
- rte_stats_bitrate_reg(bitrate_data);
+ if (bitrate_enabled != 0) {
+ bitrate_data = rte_stats_bitrate_create();
+ if (bitrate_data == NULL)
+ rte_exit(EXIT_FAILURE,
+ "Could not allocate bitrate data.\n");
+ rte_stats_bitrate_reg(bitrate_data);
+ }
#endif
-
#ifdef RTE_LIBRTE_CMDLINE
+ if (strlen(cmdline_filename) != 0)
+ cmdline_read_from_file(cmdline_filename);
+
if (interactive == 1) {
if (auto_start) {
printf("Start automatic packet forwarding\n");
start_packet_forwarding(0);
}
prompt();
+ pmd_test_exit();
} else
#endif
{
int rc;
printf("No commandline core given, start packet forwarding\n");
- start_packet_forwarding(0);
+ start_packet_forwarding(tx_first);
+ if (stats_period != 0) {
+ uint64_t prev_time = 0, cur_time, diff_time = 0;
+ uint64_t timer_period;
+
+ /* Convert to number of cycles */
+ timer_period = stats_period * rte_get_timer_hz();
+
+ while (1) {
+ cur_time = rte_get_timer_cycles();
+ diff_time += cur_time - prev_time;
+
+ if (diff_time >= timer_period) {
+ print_stats();
+ /* Reset the timer */
+ diff_time = 0;
+ }
+ /* Sleep to avoid unnecessary checks */
+ prev_time = cur_time;
+ sleep(1);
+ }
+ }
+
printf("Press enter to exit\n");
rc = read(0, &c, 1);
pmd_test_exit();
git.droids-corp.org / dpdk.git / blobdiff