* Must be instantiated with the ethernet addresses of peer traffic generator
* ports.
*/
-struct ether_addr peer_eth_addrs[RTE_MAX_ETHPORTS];
+struct rte_ether_addr peer_eth_addrs[RTE_MAX_ETHPORTS];
portid_t nb_peer_eth_addrs = 0;
/*
*/
uint8_t no_link_check = 0; /* check by default */
+/*
+ * Don't automatically start all ports in interactive mode.
+ */
+uint8_t no_device_start = 0;
+
/*
* Enable link status change notification
*/
* Ethernet device configuration.
*/
struct rte_eth_rxmode rx_mode = {
- .max_rx_pkt_len = ETHER_MAX_LEN, /**< Default maximum frame length. */
+ .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
+ /**< Default maximum frame length. */
};
struct rte_eth_txmode tx_mode = {
.vni = "\x00\x00\x00",
.udp_src = 0,
.udp_dst = RTE_BE16(4789),
- .ipv4_src = IPv4(127, 0, 0, 1),
- .ipv4_dst = IPv4(255, 255, 255, 255),
+ .ipv4_src = RTE_IPV4(127, 0, 0, 1),
+ .ipv4_dst = RTE_IPV4(255, 255, 255, 255),
.ipv6_src = "\x00\x00\x00\x00\x00\x00\x00\x00"
"\x00\x00\x00\x00\x00\x00\x00\x01",
.ipv6_dst = "\x00\x00\x00\x00\x00\x00\x00\x00"
.select_ipv4 = 1,
.select_vlan = 0,
.tni = "\x00\x00\x00",
- .ipv4_src = IPv4(127, 0, 0, 1),
- .ipv4_dst = IPv4(255, 255, 255, 255),
+ .ipv4_src = RTE_IPV4(127, 0, 0, 1),
+ .ipv4_dst = RTE_IPV4(255, 255, 255, 255),
.ipv6_src = "\x00\x00\x00\x00\x00\x00\x00\x00"
"\x00\x00\x00\x00\x00\x00\x00\x01",
.ipv6_dst = "\x00\x00\x00\x00\x00\x00\x00\x00"
static int all_ports_started(void);
struct gso_status gso_ports[RTE_MAX_ETHPORTS];
-uint16_t gso_max_segment_size = ETHER_MAX_LEN - ETHER_CRC_LEN;
+uint16_t gso_max_segment_size = RTE_ETHER_MAX_LEN - RTE_ETHER_CRC_LEN;
/*
* Helper function to check if socket is already discovered.
portid_t i;
for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
- peer_eth_addrs[i].addr_bytes[0] = ETHER_LOCAL_ADMIN_ADDR;
+ peer_eth_addrs[i].addr_bytes[0] = RTE_ETHER_LOCAL_ADMIN_ADDR;
peer_eth_addrs[i].addr_bytes[5] = i;
}
}
uint8_t port_per_socket[RTE_MAX_NUMA_NODES];
struct rte_gro_param gro_param;
uint32_t gso_types;
+ uint16_t data_size;
+ bool warning = 0;
int k;
memset(port_per_socket,0,RTE_MAX_NUMA_NODES);
port->need_reconfig = 1;
port->need_reconfig_queues = 1;
port->tx_metadata = 0;
+
+ /* Check for maximum number of segments per MTU. Accordingly
+ * update the mbuf data size.
+ */
+ if (port->dev_info.rx_desc_lim.nb_mtu_seg_max != UINT16_MAX &&
+ port->dev_info.rx_desc_lim.nb_mtu_seg_max != 0) {
+ data_size = rx_mode.max_rx_pkt_len /
+ port->dev_info.rx_desc_lim.nb_mtu_seg_max;
+
+ if ((data_size + RTE_PKTMBUF_HEADROOM) >
+ mbuf_data_size) {
+ mbuf_data_size = data_size +
+ RTE_PKTMBUF_HEADROOM;
+ warning = 1;
+ }
+ }
}
+ if (warning)
+ TESTPMD_LOG(WARNING, "Configured mbuf size %hu\n",
+ mbuf_data_size);
+
/*
* Create pools of mbuf.
* If NUMA support is disabled, create a single pool of mbuf in
fwd_lcores[lc_id]->gso_ctx.direct_pool = mbp;
fwd_lcores[lc_id]->gso_ctx.indirect_pool = mbp;
fwd_lcores[lc_id]->gso_ctx.gso_types = gso_types;
- fwd_lcores[lc_id]->gso_ctx.gso_size = ETHER_MAX_LEN -
- ETHER_CRC_LEN;
+ fwd_lcores[lc_id]->gso_ctx.gso_size = RTE_ETHER_MAX_LEN -
+ RTE_ETHER_CRC_LEN;
fwd_lcores[lc_id]->gso_ctx.flag = 0;
}
portid_t pi;
queueid_t qi;
struct rte_port *port;
- struct ether_addr mac_addr;
+ struct rte_ether_addr mac_addr;
if (port_id_is_invalid(pid, ENABLED_WARN))
return 0;
return;
}
- if (rte_dev_probe(identifier) != 0) {
+ if (rte_dev_probe(identifier) < 0) {
TESTPMD_LOG(ERR, "Failed to attach port %s\n", identifier);
return;
}
port_flow_flush(port_id);
}
- if (rte_dev_remove(dev) != 0) {
+ if (rte_dev_remove(dev) < 0) {
TESTPMD_LOG(ERR, "Failed to detach device %s\n", dev->name);
return;
}
return;
}
+void
+detach_device(char *identifier)
+{
+ struct rte_dev_iterator iterator;
+ struct rte_devargs da;
+ portid_t port_id;
+
+ printf("Removing a device...\n");
+
+ memset(&da, 0, sizeof(da));
+ if (rte_devargs_parsef(&da, "%s", identifier)) {
+ printf("cannot parse identifier\n");
+ if (da.args)
+ free(da.args);
+ return;
+ }
+
+ RTE_ETH_FOREACH_MATCHING_DEV(port_id, identifier, &iterator) {
+ if (ports[port_id].port_status != RTE_PORT_CLOSED) {
+ if (ports[port_id].port_status != RTE_PORT_STOPPED) {
+ printf("Port %u not stopped\n", port_id);
+ return;
+ }
+
+ /* sibling ports are forced to be closed */
+ if (ports[port_id].flow_list)
+ port_flow_flush(port_id);
+ ports[port_id].port_status = RTE_PORT_CLOSED;
+ printf("Port %u is now closed\n", port_id);
+ }
+ }
+
+ if (rte_eal_hotplug_remove(da.bus->name, da.name) != 0) {
+ TESTPMD_LOG(ERR, "Failed to detach device %s(%s)\n",
+ da.name, da.bus->name);
+ return;
+ }
+
+ remove_invalid_ports();
+
+ printf("Device %s is detached\n", identifier);
+ printf("Now total ports is %d\n", nb_ports);
+ printf("Done\n");
+}
+
void
pmd_test_exit(void)
{
- struct rte_device *device;
portid_t pt_id;
int ret;
int i;
printf("\nShutting down port %d...\n", pt_id);
fflush(stdout);
close_port(pt_id);
-
- /*
- * This is a workaround to fix a virtio-user issue that
- * requires to call clean-up routine to remove existing
- * socket.
- * This workaround valid only for testpmd, needs a fix
- * valid for all applications.
- * TODO: Implement proper resource cleanup
- */
- device = rte_eth_devices[pt_id].device;
- if (device && !strcmp(device->driver->name, "net_virtio_user"))
- detach_port_device(pt_id);
}
}
for (qid = 0; qid < nb_rxq; qid++) {
offloads = port->rx_conf[qid].offloads;
port->rx_conf[qid] = port->dev_info.default_rxconf;
- port->rx_conf[qid].offloads |= offloads;
+ if (offloads != 0)
+ port->rx_conf[qid].offloads = offloads;
/* Check if any Rx parameters have been passed */
if (rx_pthresh != RTE_PMD_PARAM_UNSET)
for (qid = 0; qid < nb_txq; qid++) {
offloads = port->tx_conf[qid].offloads;
port->tx_conf[qid] = port->dev_info.default_txconf;
- port->tx_conf[qid].offloads |= offloads;
+ if (offloads != 0)
+ port->tx_conf[qid].offloads = offloads;
/* Check if any Tx parameters have been passed */
if (tx_pthresh != RTE_PMD_PARAM_UNSET)
signal(SIGINT, signal_handler);
signal(SIGTERM, signal_handler);
- diag = rte_eal_init(argc, argv);
- if (diag < 0)
- rte_panic("Cannot init EAL\n");
-
testpmd_logtype = rte_log_register("testpmd");
if (testpmd_logtype < 0)
rte_panic("Cannot register log type");
rte_log_set_level(testpmd_logtype, RTE_LOG_DEBUG);
+ diag = rte_eal_init(argc, argv);
+ if (diag < 0)
+ rte_panic("Cannot init EAL\n");
+
+ if (rte_eal_process_type() == RTE_PROC_SECONDARY)
+ rte_panic("Secondary process type not supported.\n");
+
ret = register_eth_event_callback();
if (ret != 0)
rte_panic("Cannot register for ethdev events");
}
}
- if (start_port(RTE_PORT_ALL) != 0)
+ if (!no_device_start && start_port(RTE_PORT_ALL) != 0)
rte_exit(EXIT_FAILURE, "Start ports failed\n");
/* set all ports to promiscuous mode by default */
git.droids-corp.org / dpdk.git / blobdiff