#include <rte_memzone.h>
#include <rte_launch.h>
#include <rte_eal.h>
+#include <rte_alarm.h>
#include <rte_per_lcore.h>
#include <rte_lcore.h>
#include <rte_atomic.h>
#ifdef RTE_LIBRTE_BITRATE
#include <rte_bitrate.h>
#endif
-#include <rte_metrics.h>
#ifdef RTE_LIBRTE_LATENCY_STATS
#include <rte_latencystats.h>
#endif
/* use master core for command line ? */
uint8_t interactive = 0;
uint8_t auto_start = 0;
+char cmdline_filename[PATH_MAX] = {0};
/*
* NUMA support configuration.
* probed ports among the CPU sockets 0 and 1.
* Otherwise, all memory is allocated from CPU socket 0.
*/
-uint8_t numa_support = 0; /**< No numa support by default */
+uint8_t numa_support = 1; /**< numa enabled by default */
/*
* In UMA mode,all memory is allocated from socket 0 if --socket-num is
*/
uint8_t no_link_check = 0; /* check by default */
+/*
+ * Enable link status change notification
+ */
+uint8_t lsc_interrupt = 1; /* enabled by default */
+
+/*
+ * Enable device removal notification.
+ */
+uint8_t rmv_interrupt = 1; /* enabled by default */
+
/*
* NIC bypass mode configuration options.
*/
unsigned max_socket = 0;
+#ifdef RTE_LIBRTE_BITRATE
/* Bitrate statistics */
struct rte_stats_bitrates *bitrate_data;
+lcoreid_t bitrate_lcore_id;
+uint8_t bitrate_enabled;
+#endif
/* Forward function declarations */
static void map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port);
fwd_lcores[lc_id]->cpuid_idx = lc_id;
}
- /*
- * Create pools of mbuf.
- * If NUMA support is disabled, create a single pool of mbuf in
- * socket 0 memory by default.
- * Otherwise, create a pool of mbuf in the memory of sockets 0 and 1.
- *
- * Use the maximum value of nb_rxd and nb_txd here, then nb_rxd and
- * nb_txd can be configured at run time.
- */
- if (param_total_num_mbufs)
- nb_mbuf_per_pool = param_total_num_mbufs;
- else {
- nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX + (nb_lcores * mb_mempool_cache)
- + RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
-
- if (!numa_support)
- nb_mbuf_per_pool =
- (nb_mbuf_per_pool * RTE_MAX_ETHPORTS);
- }
-
- if (!numa_support) {
- if (socket_num == UMA_NO_CONFIG)
- mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool, 0);
- else
- mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
- socket_num);
- }
-
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
rte_eth_dev_info_get(pid, &port->dev_info);
port->need_reconfig_queues = 1;
}
+ /*
+ * Create pools of mbuf.
+ * If NUMA support is disabled, create a single pool of mbuf in
+ * socket 0 memory by default.
+ * Otherwise, create a pool of mbuf in the memory of sockets 0 and 1.
+ *
+ * Use the maximum value of nb_rxd and nb_txd here, then nb_rxd and
+ * nb_txd can be configured at run time.
+ */
+ if (param_total_num_mbufs)
+ nb_mbuf_per_pool = param_total_num_mbufs;
+ else {
+ nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX +
+ (nb_lcores * mb_mempool_cache) +
+ RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
+ nb_mbuf_per_pool *= RTE_MAX_ETHPORTS;
+ }
+
if (numa_support) {
uint8_t i;
- unsigned int nb_mbuf;
-
- if (param_total_num_mbufs)
- nb_mbuf_per_pool = nb_mbuf_per_pool/nb_ports;
- for (i = 0; i < max_socket; i++) {
- nb_mbuf = (nb_mbuf_per_pool * RTE_MAX_ETHPORTS);
- if (nb_mbuf)
- mbuf_pool_create(mbuf_data_size,
- nb_mbuf,i);
- }
+ for (i = 0; i < max_socket; i++)
+ mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool, i);
+ } else {
+ if (socket_num == UMA_NO_CONFIG)
+ mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool, 0);
+ else
+ mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
+ socket_num);
}
+
init_port_config();
/*
for (sm_id = 0; sm_id < nb_fs; sm_id++)
(*pkt_fwd)(fsm[sm_id]);
#ifdef RTE_LIBRTE_BITRATE
- tics_current = rte_rdtsc();
- if (tics_current - tics_datum >= tics_per_1sec) {
- /* Periodic bitrate calculation */
- for (idx_port = 0; idx_port < cnt_ports; idx_port++)
- rte_stats_bitrate_calc(bitrate_data, idx_port);
- tics_datum = tics_current;
+ if (bitrate_enabled != 0 &&
+ bitrate_lcore_id == rte_lcore_id()) {
+ tics_current = rte_rdtsc();
+ if (tics_current - tics_datum >= tics_per_1sec) {
+ /* Periodic bitrate calculation */
+ for (idx_port = 0;
+ idx_port < cnt_ports;
+ idx_port++)
+ rte_stats_bitrate_calc(bitrate_data,
+ idx_port);
+ tics_datum = tics_current;
+ }
}
#endif
#ifdef RTE_LIBRTE_LATENCY_STATS
if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
print_flag = 1;
}
+
+ if (lsc_interrupt)
+ break;
}
}
+static void
+rmv_event_callback(void *arg)
+{
+ struct rte_eth_dev *dev;
+ struct rte_devargs *da;
+ char name[32] = "";
+ uint8_t port_id = (intptr_t)arg;
+
+ RTE_ETH_VALID_PORTID_OR_RET(port_id);
+ dev = &rte_eth_devices[port_id];
+ da = dev->device->devargs;
+
+ stop_port(port_id);
+ close_port(port_id);
+ if (da->type == RTE_DEVTYPE_VIRTUAL)
+ snprintf(name, sizeof(name), "%s", da->virt.drv_name);
+ else if (da->type == RTE_DEVTYPE_WHITELISTED_PCI)
+ rte_eal_pci_device_name(&da->pci.addr, name, sizeof(name));
+ printf("removing device %s\n", name);
+ rte_eal_dev_detach(name);
+ dev->state = RTE_ETH_DEV_UNUSED;
+}
+
/* This function is used by the interrupt thread */
static void
eth_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param)
event_desc[type]);
fflush(stdout);
}
+
+ switch (type) {
+ case RTE_ETH_EVENT_INTR_RMV:
+ if (rte_eal_alarm_set(100000,
+ rmv_event_callback, (void *)(intptr_t)port_id))
+ fprintf(stderr, "Could not set up deferred device removal\n");
+ break;
+ default:
+ break;
+ }
}
static int
#ifdef RTE_NIC_BYPASS
rte_eth_dev_bypass_init(pid);
#endif
+
+ if (lsc_interrupt &&
+ (rte_eth_devices[pid].data->dev_flags &
+ RTE_ETH_DEV_INTR_LSC))
+ port->dev_conf.intr_conf.lsc = 1;
+ if (rmv_interrupt &&
+ (rte_eth_devices[pid].data->dev_flags &
+ RTE_ETH_DEV_INTR_RMV))
+ port->dev_conf.intr_conf.rmv = 1;
}
}
rte_panic("Empty set of forwarding logical cores - check the "
"core mask supplied in the command parameters\n");
+ /* Bitrate stats disabled by default */
+ bitrate_enabled = 0;
+
argc -= diag;
argv += diag;
if (argc > 1)
/* Setup bitrate stats */
#ifdef RTE_LIBRTE_BITRATE
- bitrate_data = rte_stats_bitrate_create();
- if (bitrate_data == NULL)
- rte_exit(EXIT_FAILURE, "Could not allocate bitrate data.\n");
- rte_stats_bitrate_reg(bitrate_data);
+ if (bitrate_enabled != 0) {
+ bitrate_data = rte_stats_bitrate_create();
+ if (bitrate_data == NULL)
+ rte_exit(EXIT_FAILURE,
+ "Could not allocate bitrate data.\n");
+ rte_stats_bitrate_reg(bitrate_data);
+ }
#endif
-
#ifdef RTE_LIBRTE_CMDLINE
+ if (strlen(cmdline_filename) != 0)
+ cmdline_read_from_file(cmdline_filename);
+
if (interactive == 1) {
if (auto_start) {
printf("Start automatic packet forwarding\n");
start_packet_forwarding(0);
}
prompt();
+ pmd_test_exit();
} else
#endif
{
git.droids-corp.org / dpdk.git / blobdiff