--- /dev/null
+/*
+ * Copyright Droids Corporation, Microb Technology, Eirbot (2005)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Revision : $Id: uart_config.h,v 1.3 2009-05-27 20:04:06 zer0 Exp $
+ *
+ */
+
+/* Droids-corp 2004 - Zer0
+ * config for uart module
+ */
+
+#ifndef UART_CONFIG_H
+#define UART_CONFIG_H
+
+#if UART_NUM == 0
+
+/* compile uart0 fonctions, undefine it to pass compilation */
+#define UART0_COMPILE
+
+/* enable uart0 if == 1, disable if == 0 */
+#define UART0_ENABLED 1
+
+/* enable uart0 interrupts if == 1, disable if == 0 */
+#define UART0_INTERRUPT_ENABLED 1
+
+#define UART0_BAUDRATE 57600
+
+#define UART0_USE_DOUBLE_SPEED 0
+
+#define UART0_RX_FIFO_SIZE 64
+#define UART0_TX_FIFO_SIZE 16
+
+#define UART0_NBITS 8
+#define UART0_PARITY UART_PARTITY_NONE
+#define UART0_STOP_BIT UART_STOP_BITS_1
+
+#elif UART_NUM == 1
+
+/* compile uart1 fonctions, undefine it to pass compilation */
+#define UART1_COMPILE
+
+/* enable uart1 if == 1, disable if == 0 */
+#define UART1_ENABLED 1
+
+/* enable uart1 interrupts if == 1, disable if == 0 */
+#define UART1_INTERRUPT_ENABLED 1
+
+#define UART1_BAUDRATE 57600
+
+#define UART1_USE_DOUBLE_SPEED 0
+
+#define UART1_RX_FIFO_SIZE 32
+#define UART1_TX_FIFO_SIZE 4
+
+#define UART1_NBITS 8
+#define UART1_PARITY UART_PARTITY_NONE
+#define UART1_STOP_BIT UART_STOP_BITS_1
+
+#elif UART_NUM == 2
+
+/* compile uart2 fonctions, undefine it to pass compilation */
+#define UART2_COMPILE
+
+/* enable uart2 if == 1, disable if == 0 */
+#define UART2_ENABLED 1
+
+/* enable uart2 interrupts if == 1, disable if == 0 */
+#define UART2_INTERRUPT_ENABLED 1
+
+#define UART2_BAUDRATE 57600
+
+#define UART2_USE_DOUBLE_SPEED 0
+
+#define UART2_RX_FIFO_SIZE 32
+#define UART2_TX_FIFO_SIZE 4
+
+#define UART2_NBITS 8
+#define UART2_PARITY UART_PARTITY_NONE
+#define UART2_STOP_BIT UART_STOP_BITS_1
+
+#elif UART_NUM == 3
+
+/* compile uart3 fonctions, undefine it to pass compilation */
+#define UART3_COMPILE
+
+/* enable uart3 if == 1, disable if == 0 */
+#define UART3_ENABLED 1
+
+/* enable uart3 interrupts if == 1, disable if == 0 */
+#define UART3_INTERRUPT_ENABLED 1
+
+#define UART3_BAUDRATE 57600
+
+#define UART3_USE_DOUBLE_SPEED 0
+
+#define UART3_RX_FIFO_SIZE 32
+#define UART3_TX_FIFO_SIZE 4
+
+#define UART3_NBITS 8
+#define UART3_PARITY UART_PARTITY_NONE
+#define UART3_STOP_BIT UART_STOP_BITS_1
+
+#endif /* uart num */
+
+#endif
+