config: add dpaaX build for all Linux platforms

[dpdk.git] / config / common_base

diff --git a/config/common_base b/config/common_base
index 170a389..ee10b44 100644 (file)
--- a/config/common_base
+++ b/config/common_base
@@ -1,34 +1,5 @@
-#   BSD LICENSE
-#
-#   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
-#   All rights reserved.
-#
-#   Redistribution and use in source and binary forms, with or without
-#   modification, are permitted provided that the following conditions
-#   are met:
-#
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in
-#       the documentation and/or other materials provided with the
-#       distribution.
-#     * Neither the name of Intel Corporation nor the names of its
-#       contributors may be used to endorse or promote products derived
-#       from this software without specific prior written permission.
-#
-#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2017 Intel Corporation
 
 #
 # define executive environment
@@ -201,6 +172,7 @@ CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
 CONFIG_RTE_LIBRTE_DPAA_BUS=n
 CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
 CONFIG_RTE_LIBRTE_DPAA_PMD=n
+CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
 
 #
 # Compile NXP DPAA2 FSL-MC Bus
@@ -298,6 +270,7 @@ CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n
 #
 CONFIG_RTE_LIBRTE_MLX4_PMD=n
 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n
 CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
 
 #
@@ -305,6 +278,7 @@ CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
 #
 CONFIG_RTE_LIBRTE_MLX5_PMD=n
 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS=n
 CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
 
 #
@@ -317,7 +291,6 @@ CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
 # QLogic 10G/25G/40G/50G/100G PMD
 #
 CONFIG_RTE_LIBRTE_QEDE_PMD=y
-CONFIG_RTE_LIBRTE_QEDE_DEBUG_INFO=n
 CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
 #Provides abs path/name of the firmware file.
@@ -486,6 +459,7 @@ CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
 CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n
 CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n
+CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS=2048
 
 #
 # NXP DPAA caam - crypto driver
@@ -494,6 +468,8 @@ CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
 CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_INIT=n
 CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
+CONFIG_RTE_DPAA_SEC_PMD_MAX_NB_SESSIONS=2048
 
 #
 # Compile PMD for QuickAssist based devices
@@ -585,7 +561,6 @@ CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
 # Compile PMD for software event device
 #
 CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
-CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV_DEBUG=n
 
 #
 # Compile PMD for octeontx sso event device
@@ -607,10 +582,19 @@ CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
 #
 CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
 
+#
+# Compile raw device support
+# EXPERIMENTAL: API may change without prior notice
+#
+CONFIG_RTE_LIBRTE_RAWDEV=y
+CONFIG_RTE_RAWDEV_MAX_DEVS=10
+CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
+
 #
 # Compile librte_ring
 #
 CONFIG_RTE_LIBRTE_RING=y
+CONFIG_RTE_RING_USE_C11_MEM_MODEL=n
 
 #
 # Compile librte_mempool