- Open system with configurable amount of outstanding events limited only by
DRAM
- HW accelerated dequeue timeout support to enable power management
+- HW managed event timers support through TIM, with high precision and
+ time granularity of 2.5us.
+- Up to 256 TIM rings aka event timer adapters.
+- Up to 8 rings traversed in parallel.
+- HW managed packets enqueued from ethdev to eventdev exposed through event eth
+ RX adapter.
+- N:1 ethernet device Rx queue to Event queue mapping.
+- Lockfree Tx from event eth Tx adapter using ``DEV_TX_OFFLOAD_MT_LOCKFREE``
+ capability while maintaining receive packet order.
+- Full Rx/Tx offload support defined through ethdev queue config.
Prerequisites and Compilation procedure
---------------------------------------
--dev "0002:0e:00.0,xae_cnt=16384"
+- ``Force legacy mode``
+
+ The ``single_ws`` devargs parameter is introduced to force legacy mode i.e
+ single workslot mode in SSO and disable the default dual workslot mode.
+ For example::
+
+ --dev "0002:0e:00.0,single_ws=1"
+
+- ``Event Group QoS support``
+
+ SSO GGRPs i.e. queue uses DRAM & SRAM buffers to hold in-flight
+ events. By default the buffers are assigned to the SSO GGRPs to
+ satisfy minimum HW requirements. SSO is free to assign the remaining
+ buffers to GGRPs based on a preconfigured threshold.
+ We can control the QoS of SSO GGRP by modifying the above mentioned
+ thresholds. GGRPs that have higher importance can be assigned higher
+ thresholds than the rest. The dictionary format is as follows
+ [Qx-XAQ-TAQ-IAQ][Qz-XAQ-TAQ-IAQ] expressed in percentages, 0 represents
+ default.
+ For example::
+
+ --dev "0002:0e:00.0,qos=[1-50-50-50]"
+
+- ``Selftest``
+
+ The functionality of OCTEON TX2 eventdev can be verified using this option,
+ various unit and functional tests are run to verify the sanity.
+ The tests are run once the vdev creation is successfully complete.
+ For example::
+
+ --dev "0002:0e:00.0,selftest=1"
+
+- ``TIM disable NPA``
+
+ By default chunks are allocated from NPA then TIM can automatically free
+ them when traversing the list of chunks. The ``tim_disable_npa`` devargs
+ parameter disables NPA and uses software mempool to manage chunks
+ For example::
+
+ --dev "0002:0e:00.0,tim_disable_npa=1"
+
+- ``TIM modify chunk slots``
+
+ The ``tim_chnk_slots`` devargs can be used to modify number of chunk slots.
+ Chunks are used to store event timers, a chunk can be visualised as an array
+ where the last element points to the next chunk and rest of them are used to
+ store events. TIM traverses the list of chunks and enqueues the event timers
+ to SSO. The default value is 255 and the max value is 4095.
+ For example::
+
+ --dev "0002:0e:00.0,tim_chnk_slots=1023"
+
+- ``TIM enable arm/cancel statistics``
+
+ The ``tim_stats_ena`` devargs can be used to enable arm and cancel stats of
+ event timer adapter.
+ For example::
+
+ --dev "0002:0e:00.0,tim_stats_ena=1"
+
+- ``TIM limit max rings reserved``
+
+ The ``tim_rings_lmt`` devargs can be used to limit the max number of TIM
+ rings i.e. event timer adapter reserved on probe. Since, TIM rings are HW
+ resources we can avoid starving other applications by not grabbing all the
+ rings.
+ For example::
+
+ --dev "0002:0e:00.0,tim_rings_lmt=5"
+
+- ``TIM ring control internal parameters``
+
+ When using multiple TIM rings the ``tim_ring_ctl`` devargs can be used to
+ control each TIM rings internal parameters uniquely. The following dict
+ format is expected [ring-chnk_slots-disable_npa-stats_ena]. 0 represents
+ default values.
+ For Example::
+
+ --dev "0002:0e:00.0,tim_ring_ctl=[2-1023-1-0]"
+
Debugging Options
~~~~~~~~~~~~~~~~~
+===+============+=======================================================+
| 1 | SSO | --log-level='pmd\.event\.octeontx2,8' |
+---+------------+-------------------------------------------------------+
+ | 2 | TIM | --log-level='pmd\.event\.octeontx2\.timer,8' |
+ +---+------------+-------------------------------------------------------+
git.droids-corp.org / dpdk.git / blobdiff