examples/l3fwd: support event vector
[dpdk.git] / doc / guides / howto / lm_bond_virtio_sriov.rst
index fe9803e..e854ae2 100644 (file)
@@ -1,32 +1,5 @@
-..  BSD LICENSE
-    Copyright(c) 2016 Intel Corporation. All rights reserved.
-    All rights reserved.
-
-    Redistribution and use in source and binary forms, with or without
-    modification, are permitted provided that the following conditions
-    are met:
-
-    * Redistributions of source code must retain the above copyright
-    notice, this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright
-    notice, this list of conditions and the following disclaimer in
-    the documentation and/or other materials provided with the
-    distribution.
-    * Neither the name of Intel Corporation nor the names of its
-    contributors may be used to endorse or promote products derived
-    from this software without specific prior written permission.
-
-    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2016 Intel Corporation.
 
 Live Migration of VM with SR-IOV VF
 ===================================
@@ -355,7 +328,7 @@ On host_server_2: Terminal 1
 
 .. code-block:: console
 
-   testomd> show port info all
+   testpmd> show port info all
    testpmd> show port stats all
    testpmd> show bonding config 2
    testpmd> port attach 0000:00:04.0
@@ -419,7 +392,7 @@ Set up Virtual Functions on host_server_1
    cat /sys/bus/pci/devices/0000\:02\:00.0/sriov_numvfs
    echo 1 > /sys/bus/pci/devices/0000\:02\:00.0/sriov_numvfs
    cat /sys/bus/pci/devices/0000\:02\:00.0/sriov_numvfs
-   rmmod i40evf
+   rmmod iavf
 
 vm_virtio_vf_one_212_46.sh
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -519,7 +492,7 @@ Set up Virtual Functions on host_server_2
    cat /sys/bus/pci/devices/0000\:03\:00.0/sriov_numvfs
    echo 1 > /sys/bus/pci/devices/0000\:03\:00.0/sriov_numvfs
    cat /sys/bus/pci/devices/0000\:03\:00.0/sriov_numvfs
-   rmmod i40evf
+   rmmod iavf
 
 vm_virtio_one_migrate.sh
 ~~~~~~~~~~~~~~~~~~~~~~~~
@@ -608,22 +581,22 @@ Set up DPDK in the Virtual Machine
    # virtio port is 03
    # vf port is 04
 
-   cat  /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
-   echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
-   cat  /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
+   /root/dpdk/usertools/dpdk-hugepages.py --show
+   /root/dpdk/usertools/dpdk-hugepages.py --setup 2G
+   /root/dpdk/usertools/dpdk-hugepages.py --show
 
    ifconfig -a
-   /root/dpdk/tools/dpdk-devbind.py --status
+   /root/dpdk/usertools/dpdk-devbind.py --status
 
    rmmod virtio-pci ixgbevf
 
    modprobe uio
-   insmod /root/dpdk/x86_64-default-linuxapp-gcc/kmod/igb_uio.ko
+   insmod igb_uio.ko
 
-   /root/dpdk/tools/dpdk-devbind.py -b igb_uio 0000:00:03.0
-   /root/dpdk/tools/dpdk-devbind.py -b igb_uio 0000:00:04.0
+   /root/dpdk/usertools/dpdk-devbind.py -b igb_uio 0000:00:03.0
+   /root/dpdk/usertools/dpdk-devbind.py -b igb_uio 0000:00:04.0
 
-   /root/dpdk/tools/dpdk-devbind.py --status
+   /root/dpdk/usertools/dpdk-devbind.py --status
 
 run_testpmd_bonding_in_vm.sh
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -640,8 +613,8 @@ Run testpmd in the Virtual Machine.
 
    # use for bonding of virtio and vf tests in VM
 
-   /root/dpdk/x86_64-default-linuxapp-gcc/app/testpmd \
-   -c f -n 4 --socket-mem 350 --  --i --port-topology=chained
+   /root/dpdk/<build_dir>/app/dpdk-testpmd \
+   -l 0-3 -n 4 --socket-mem 350 --  --i --port-topology=chained
 
 .. _lm_bond_virtio_sriov_switch_conf: