ethdev: remove jumbo offload flag

[dpdk.git] / doc / guides / howto / pvp_reference_benchmark.rst

diff --git a/doc/guides/howto/pvp_reference_benchmark.rst b/doc/guides/howto/pvp_reference_benchmark.rst
index ace8e6f..484de3b 100644 (file)
--- a/doc/guides/howto/pvp_reference_benchmark.rst
+++ b/doc/guides/howto/pvp_reference_benchmark.rst
@@ -1,32 +1,6 @@
-..  BSD LICENSE
-    Copyright(c) 2016 Red Hat, Inc. All rights reserved.
-    All rights reserved.
-
-    Redistribution and use in source and binary forms, with or without
-    modification, are permitted provided that the following conditions
-    are met:
-
-    * Redistributions of source code must retain the above copyright
-    notice, this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright
-    notice, this list of conditions and the following disclaimer in
-    the documentation and/or other materials provided with the
-    distribution.
-    * Neither the name of Intel Corporation nor the names of its
-    contributors may be used to endorse or promote products derived
-    from this software without specific prior written permission.
-
-    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright 2016 Red Hat, Inc.
+
 
 
 PVP reference benchmark setup using testpmd
@@ -52,7 +26,7 @@ Setup overview
 
    PVP setup using 2 NICs
 
-In this diagram, each red arrow represents one logical core. This use-case
+In this diagram, each red arrow represents one logical core. This use case
 requires 6 dedicated logical cores. A forwarding configuration with a single
 NIC is also possible, requiring 3 logical cores.
 
@@ -119,19 +93,13 @@ Build Qemu:
        mkdir bin
        cd bin
        ../configure --target-list=x86_64-softmmu
+       make
 
 
 DPDK build
 ~~~~~~~~~~
 
-Build DPDK:
-
-   .. code-block:: console
-
-      git clone git://dpdk.org/dpdk
-      cd dpdk
-      export RTE_SDK=$PWD
-      make install T=x86_64-native-linuxapp-gcc DESTDIR=install
+See :doc:`../linux_gsg/build_dpdk` for details.
 
 
 Testpmd launch
@@ -142,7 +110,7 @@ Testpmd launch
    .. code-block:: console
 
       modprobe vfio-pci
-      $RTE_SDK/install/sbin/dpdk-devbind -b vfio-pci 0000:11:00.0 0000:11:00.1
+      usertools/dpdk-devbind -b vfio-pci 0000:11:00.0 0000:11:00.1
 
    .. Note::
 
@@ -154,10 +122,10 @@ Testpmd launch
 
    .. code-block:: console
 
-      $RTE_SDK/install/bin/testpmd -l 0,2,3,4,5 --socket-mem=1024 -n 4 \
+      <build_dir>/app/dpdk-testpmd -l 0,2,3,4,5 --socket-mem=1024 -n 4 \
           --vdev 'net_vhost0,iface=/tmp/vhost-user1' \
           --vdev 'net_vhost1,iface=/tmp/vhost-user2' -- \
-          --portmask=f --disable-hw-vlan -i --rxq=1 --txq=1
+          --portmask=f -i --rxq=1 --txq=1 \
           --nb-cores=4 --forward-mode=io
 
    With this command, isolated CPUs 2 to 5 will be used as lcores for PMD threads.
@@ -338,14 +306,7 @@ Guest tuning
 DPDK build
 ~~~~~~~~~~
 
-Build DPDK:
-
-   .. code-block:: console
-
-      git clone git://dpdk.org/dpdk
-      cd dpdk
-      export RTE_SDK=$PWD
-      make install T=x86_64-native-linuxapp-gcc DESTDIR=install
+See :doc:`../linux_gsg/build_dpdk` for details.
 
 
 Testpmd launch
@@ -365,16 +326,16 @@ Bind the virtio-net devices to DPDK:
 
    .. code-block:: console
 
-      $RTE_SDK/tools/dpdk-devbind.py -b vfio-pci 0000:00:10.0 0000:00:11.0
+      usertools/dpdk-devbind.py -b vfio-pci 0000:00:10.0 0000:00:11.0
 
 Start testpmd:
 
    .. code-block:: console
 
-      $RTE_SDK/install/bin/testpmd -l 0,1,2 --socket-mem 1024 -n 4 \
+      <build_dir>/app/dpdk-testpmd -l 0,1,2 --socket-mem 1024 -n 4 \
           --proc-type auto --file-prefix pg -- \
           --portmask=3 --forward-mode=macswap --port-topology=chained \
-          --disable-hw-vlan --disable-rss -i --rxq=1 --txq=1 \
+          --disable-rss -i --rxq=1 --txq=1 \
           --rxd=256 --txd=256 --nb-cores=2 --auto-start
 
 Results template