-.. BSD LICENSE
+.. SPDX-License-Identifier: BSD-3-Clause
Copyright (c) 2015 QLogic Corporation
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of QLogic Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
BNX2X Poll Mode Driver
======================
The BNX2X poll mode driver library (**librte_pmd_bnx2x**) implements support
for **QLogic 578xx** 10/20 Gbps family of adapters as well as their virtual
functions (VF) in SR-IOV context. It is supported on several standard Linux
-distros like Red Hat 7.x and SLES12 OS. It is compile-tested under FreeBSD OS.
+distros like RHEL and SLES. It is compile-tested under FreeBSD OS.
More information can be found at `QLogic Corporation's Official Website
<http://www.qlogic.com>`_.
Co-existence considerations
---------------------------
-- BCM578xx being a CNA can have both NIC and Storage personalities.
- However, coexistence with storage protocol drivers (cnic, bnx2fc and
- bnx2fi) is not supported on the same adapter. So storage personality
- has to be disabled on that adapter when used in DPDK applications.
-
-- For SR-IOV case, bnx2x PMD will be used to bind to SR-IOV VF device and
- Linux native kernel driver (bnx2x) will be attached to SR-IOV PF.
-
+- QLogic 578xx CNAs support Ethernet, iSCSI and FCoE functionalities.
+ These functionalities are supported using QLogic Linux kernel
+ drivers bnx2x, cnic, bnx2i and bnx2fc. DPDK is supported on these
+ adapters using bnx2x PMD.
+
+- When SR-IOV is not enabled on the adapter,
+ QLogic Linux kernel drivers (bnx2x, cnic, bnx2i and bnx2fc) and bnx2x
+ PMD can’t be attached to different PFs on a given QLogic 578xx
+ adapter.
+ A given adapter needs to be completely used by DPDK or Linux drivers.
+ Before binding DPDK driver to one or more PFs on the adapter,
+ please make sure to unbind Linux drivers from all PFs of the adapter.
+ If there are multiple adapters on the system, one or more adapters
+ can be used by DPDK driver completely and other adapters can be used
+ by Linux drivers completely.
+
+- When SR-IOV is enabled on the adapter,
+ Linux kernel drivers (bnx2x, cnic, bnx2i and bnx2fc) can be bound
+ to the PFs of a given adapter and either bnx2x PMD or Linux drivers
+ bnx2x can be bound to the VFs of the adapter.
Supported QLogic NICs
---------------------
- Requires firmware version **7.2.51.0**. It is included in most of the
standard Linux distros. If it is not available visit
- `QLogic Driver Download Center <http://driverdownloads.qlogic.com>`_
+ `linux-firmware git repository <https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/bnx2x/bnx2x-e2-7.2.51.0.fw>`_
to get the required firmware.
Pre-Installation Configuration
The following options can be modified in the ``.config`` file. Please note that
enabling debugging options may affect system performance.
-- ``CONFIG_RTE_LIBRTE_BNX2X_PMD`` (default **y**)
-
- Toggle compilation of bnx2x driver.
-
-- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG`` (default **n**)
-
- Toggle display of generic debugging messages.
-
-- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT`` (default **n**)
+- ``CONFIG_RTE_LIBRTE_BNX2X_PMD`` (default **n**)
- Toggle display of initialization related messages.
+ Toggle compilation of bnx2x driver. To use bnx2x PMD set this config parameter
+ to 'y'. Also, in order for firmware binary to load user will need zlib devel
+ package installed.
- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX`` (default **n**)
using the instructions outlined in the Application notes below.
#. Running testpmd:
+ (Supply ``--log-level="pmd.net.bnx2x.driver",7`` to view informational messages):
Follow instructions available in the document
:ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`