doc: improve lstopo tip

[dpdk.git] / doc / guides / nics / bnxt.rst

diff --git a/doc/guides/nics/bnxt.rst b/doc/guides/nics/bnxt.rst
index 2f1ecff..0fb2032 100644 (file)
--- a/doc/guides/nics/bnxt.rst
+++ b/doc/guides/nics/bnxt.rst
@@ -6,7 +6,7 @@ BNXT Poll Mode Driver
 
 The Broadcom BNXT PMD (**librte_net_bnxt**) implements support for adapters
 based on Ethernet controllers and SoCs belonging to the Broadcom
-BCM574XX/BCM575XX NetXtreme-E® Family of Ethernet Network Controllers,
+BCM5741X/BCM575XX NetXtreme-E® Family of Ethernet Network Controllers,
 the Broadcom BCM588XX Stingray Family of Smart NIC Adapters, and the Broadcom
 StrataGX® BCM5873X Series of Communications Processors.
 
@@ -361,7 +361,7 @@ The application enables multiple TX and RX queues when it is started.
 
 .. code-block:: console
 
-    testpmd -l 1,3,5 --main-lcore 1 --txq=2 –rxq=2 --nb-cores=2
+    dpdk-testpmd -l 1,3,5 --main-lcore 1 --txq=2 –rxq=2 --nb-cores=2
 
 **TSS**
 
@@ -661,6 +661,8 @@ optimizes flow insertions and deletions.
 This is a tech preview feature, and is disabled by default. It can be enabled
 using bnxt devargs. For ex: "-a 0000:0d:00.0,host-based-truflow=1”.
 
+This feature is currently supported on Whitney+ and Stingray devices.
+
 Notes
 -----
 
@@ -751,7 +753,7 @@ The sample command line with the new ``devargs`` looks like this::
 
 .. code-block:: console
 
-       testpmd -l1-4 -n2 -a 0008:01:00.0,host-based-truflow=1,\
+       dpdk-testpmd -l1-4 -n2 -a 0008:01:00.0,host-based-truflow=1,\
        representor=[0], rep-based-pf=8,rep-is-pf=0,rep-q-r2f=1,rep-fc-r2f=1,\
        rep-q-f2r=0,rep-fc-f2r=1 --log-level="pmd.*",8 -- -i --rxq=3 --txq=3
 
@@ -845,8 +847,8 @@ DPDK implements a light-weight library to allow PMDs to be bonded together and p
 
 .. code-block:: console
 
-    testpmd -l 0-3 -n4 --vdev 'net_bonding0,mode=0,slave=<PCI B:D.F device 1>,slave=<PCI B:D.F device 2>,mac=XX:XX:XX:XX:XX:XX’ – --socket_num=1 – -i --port-topology=chained
-    (ex) testpmd -l 1,3,5,7,9 -n4 --vdev 'net_bonding0,mode=0,slave=0000:82:00.0,slave=0000:82:00.1,mac=00:1e:67:1d:fd:1d' – --socket-num=1 – -i --port-topology=chained
+    dpdk-testpmd -l 0-3 -n4 --vdev 'net_bonding0,mode=0,slave=<PCI B:D.F device 1>,slave=<PCI B:D.F device 2>,mac=XX:XX:XX:XX:XX:XX’ – --socket_num=1 – -i --port-topology=chained
+    (ex) dpdk-testpmd -l 1,3,5,7,9 -n4 --vdev 'net_bonding0,mode=0,slave=0000:82:00.0,slave=0000:82:00.1,mac=00:1e:67:1d:fd:1d' – --socket-num=1 – -i --port-topology=chained
 
 Vector Processing
 -----------------
@@ -890,6 +892,9 @@ is stopped.
 Note that TX (or RX) vector mode can be enabled independently from RX (or TX)
 vector mode.
 
+Also vector mode is allowed when jumbo is enabled
+as long as the MTU setting does not require scattered Rx.
+
 Appendix
 --------