net/i40e: remove devarg use-latest-supported-vec

[dpdk.git] / doc / guides / nics / cxgbe.rst

diff --git a/doc/guides/nics/cxgbe.rst b/doc/guides/nics/cxgbe.rst
index 54a4c13..f01cd65 100644 (file)
--- a/doc/guides/nics/cxgbe.rst
+++ b/doc/guides/nics/cxgbe.rst
@@ -5,7 +5,7 @@
 CXGBE Poll Mode Driver
 ======================
 
-The CXGBE PMD (**librte_pmd_cxgbe**) provides poll mode driver support
+The CXGBE PMD (**librte_net_cxgbe**) provides poll mode driver support
 for **Chelsio Terminator** 10/25/40/100 Gbps family of adapters. CXGBE PMD
 has support for the latest Linux and FreeBSD operating systems.
 
@@ -36,12 +36,12 @@ Limitations
 -----------
 
 The Chelsio Terminator series of devices provide two/four ports but
-expose a single PCI bus address, thus, librte_pmd_cxgbe registers
+expose a single PCI bus address, thus, librte_net_cxgbe registers
 itself as a PCI driver that allocates one Ethernet device per detected
 port.
 
-For this reason, one cannot whitelist/blacklist a single port without
-whitelisting/blacklisting the other ports on the same device.
+For this reason, one cannot allow/block a single port without
+allowing/blocking the other ports on the same device.
 
 .. _t5-nics:
 
@@ -87,35 +87,19 @@ Prerequisites
   :ref:`linux-installation` for Linux and section :ref:`freebsd-installation`
   for FreeBSD.
 
-Pre-Installation Configuration
-------------------------------
-
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-The following options can be modified in the ``.config`` file. Please note that
-enabling debugging options may affect system performance.
-
-- ``CONFIG_RTE_LIBRTE_CXGBE_PMD`` (default **y**)
-
-  Toggle compilation of librte_pmd_cxgbe driver.
-
-  .. note::
-
-     This controls compilation of both CXGBE and CXGBEVF PMD.
 
 Runtime Options
-~~~~~~~~~~~~~~~
+---------------
 
 The following ``devargs`` options can be enabled at runtime. They must
 be passed as part of EAL arguments. For example,
 
 .. code-block:: console
 
-   testpmd -w 02:00.4,keep_ovlan=1 -- -i
+   dpdk-testpmd -a 02:00.4,keep_ovlan=1 -- -i
 
 Common Runtime Options
-^^^^^^^^^^^^^^^^^^^^^^
+~~~~~~~~~~~~~~~~~~~~~~
 
 - ``keep_ovlan`` (default **0**)
 
@@ -133,7 +117,7 @@ Common Runtime Options
   coalesce limit has been reached.
 
 CXGBE VF Only Runtime Options
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 - ``force_link_up`` (default **0**)
 
@@ -142,7 +126,7 @@ CXGBE VF Only Runtime Options
   to send traffic to each other even when the physical link is down.
 
 CXGBE PF Only Runtime Options
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 - ``filtermode`` (default **0**)
 
@@ -317,7 +301,7 @@ CXGBE PF Only Runtime Options
 
   .. code-block:: console
 
-     testpmd -w 02:00.4,filtermode=0x88 -- -i
+     dpdk-testpmd -a 02:00.4,filtermode=0x88 -- -i
 
 - ``filtermask`` (default **0**)
 
@@ -344,7 +328,7 @@ CXGBE PF Only Runtime Options
 
   .. code-block:: console
 
-     testpmd -w 02:00.4,filtermode=0x88,filtermask=0x80 -- -i
+     dpdk-testpmd -a 02:00.4,filtermode=0x88,filtermask=0x80 -- -i
 
 .. _driver-compilation:
 
@@ -426,7 +410,7 @@ Running testpmd
 ~~~~~~~~~~~~~~~
 
 This section demonstrates how to launch **testpmd** with Chelsio
-devices managed by librte_pmd_cxgbe in Linux operating system.
+devices managed by librte_net_cxgbe in Linux operating system.
 
 #. Load the kernel module:
 
@@ -676,7 +660,7 @@ Running testpmd
 ~~~~~~~~~~~~~~~
 
 This section demonstrates how to launch **testpmd** with Chelsio
-devices managed by librte_pmd_cxgbe in FreeBSD operating system.
+devices managed by librte_net_cxgbe in FreeBSD operating system.
 
 #. Change to DPDK source directory where the target has been compiled in
    section :ref:`driver-compilation`:
@@ -689,7 +673,7 @@ devices managed by librte_pmd_cxgbe in FreeBSD operating system.
 
    .. code-block:: console
 
-      cp x86_64-native-freebsd-clang/kmod/contigmem.ko /boot/kernel/
+      cp <build_dir>/kernel/freebsd/contigmem.ko /boot/kernel/
 
 #. Add the following lines to /boot/loader.conf:
 
@@ -770,13 +754,13 @@ devices managed by librte_pmd_cxgbe in FreeBSD operating system.
 
    .. code-block:: console
 
-      kldload ./x86_64-native-freebsd-clang/kmod/nic_uio.ko
+      kldload <build_dir>/kernel/freebsd/nic_uio.ko
 
 #. Start testpmd with basic parameters:
 
    .. code-block:: console
 
-      ./x86_64-native-freebsd-clang/app/testpmd -l 0-3 -n 4 -w 0000:02:00.4 -- -i
+      ./<build_dir>/app/dpdk-testpmd -l 0-3 -n 4 -a 0000:02:00.4 -- -i
 
    Example output: