common/cnxk: enable backpressure on CPT with inline inbound

[dpdk.git] / doc / guides / nics / dpaa.rst

diff --git a/doc/guides/nics/dpaa.rst b/doc/guides/nics/dpaa.rst
index 1deb7fa..9dad612 100644 (file)
--- a/doc/guides/nics/dpaa.rst
+++ b/doc/guides/nics/dpaa.rst
@@ -5,7 +5,7 @@
 DPAA Poll Mode Driver
 =====================
 
-The DPAA NIC PMD (**librte_pmd_dpaa**) provides poll mode driver
+The DPAA NIC PMD (**librte_net_dpaa**) provides poll mode driver
 support for the inbuilt NIC found in the **NXP DPAA** SoC family.
 
 More information can be found at `NXP Official Website
@@ -163,10 +163,10 @@ Manager.
   this pool.
 
 
-Whitelisting & Blacklisting
----------------------------
+Allowing & Blocking
+-------------------
 
-For blacklisting a DPAA device, following commands can be used.
+For blocking a DPAA device, following commands can be used.
 
  .. code-block:: console
 
@@ -297,7 +297,7 @@ FMC - FMAN Configuration Tool
 
 
    The details can be found in FMC Doc at:
-   `Frame Mnager Configuration Tool <https://www.nxp.com/docs/en/application-note/AN4760.pdf>`_.
+   `Frame Manager Configuration Tool <https://www.nxp.com/docs/en/application-note/AN4760.pdf>`_.
 
 FMLIB
 ~~~~~
@@ -307,7 +307,7 @@ FMLIB
 
    This is an alternate to the FMC based configuration. This library provides
    direct ioctl based interfaces for FMAN configuration as used by the FMC tool
-   as well. This helps in overcoming the main limitaiton of FMC - i.e. lack
+   as well. This helps in overcoming the main limitation of FMC - i.e. lack
    of dynamic configuration.
 
    The location for the fmd driver as used by FMLIB and FMC is as follows:
@@ -319,7 +319,7 @@ VSP (Virtual Storage Profile)
    The storage profiled are means to provide virtualized interface. A ranges of
    storage profiles cab be associated to Ethernet ports.
    They are selected during classification. Specify how the frame should be
-   written to memory and which buffer pool to select for packet storange in
+   written to memory and which buffer pool to select for packet storage in
    queues. Start and End margin of buffer can also be configured.
 
 Limitations
@@ -335,7 +335,7 @@ Maximum packet length
 ~~~~~~~~~~~~~~~~~~~~~
 
 The DPAA SoC family support a maximum of a 10240 jumbo frame. The value
-is fixed and cannot be changed. So, even when the ``rxmode.max_rx_pkt_len``
+is fixed and cannot be changed. So, even when the ``rxmode.mtu``
 member of ``struct rte_eth_conf`` is set to a value lower than 10240, frames
 up to 10240 bytes can still reach the host interface.