mem: instrument allocator for ASan

[dpdk.git] / doc / guides / nics / dpaa.rst

diff --git a/doc/guides/nics/dpaa.rst b/doc/guides/nics/dpaa.rst
index 74d4a60..9dad612 100644 (file)
--- a/doc/guides/nics/dpaa.rst
+++ b/doc/guides/nics/dpaa.rst
@@ -5,7 +5,7 @@
 DPAA Poll Mode Driver
 =====================
 
-The DPAA NIC PMD (**librte_pmd_dpaa**) provides poll mode driver
+The DPAA NIC PMD (**librte_net_dpaa**) provides poll mode driver
 support for the inbuilt NIC found in the **NXP DPAA** SoC family.
 
 More information can be found at `NXP Official Website
@@ -163,10 +163,10 @@ Manager.
   this pool.
 
 
-Whitelisting & Blacklisting
----------------------------
+Allowing & Blocking
+-------------------
 
-For blacklisting a DPAA device, following commands can be used.
+For blocking a DPAA device, following commands can be used.
 
  .. code-block:: console
 
@@ -196,31 +196,6 @@ See :doc:`../platform/dpaa` for setup information
 Pre-Installation Configuration
 ------------------------------
 
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-The following options can be modified in the ``config`` file.
-Please note that enabling debugging options may affect system performance.
-
-- ``CONFIG_RTE_LIBRTE_DPAA_BUS`` (default ``y``)
-
-  Toggle compilation of the ``librte_bus_dpaa`` driver.
-
-- ``CONFIG_RTE_LIBRTE_DPAA_PMD`` (default ``y``)
-
-  Toggle compilation of the ``librte_pmd_dpaa`` driver.
-
-- ``CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER`` (default ``n``)
-
-  Toggles display of bus configurations and enables a debugging queue
-  to fetch error (Rx/Tx) packets to driver. By default, packets with errors
-  (like wrong checksum) are dropped by the hardware.
-
-- ``CONFIG_RTE_LIBRTE_DPAA_HWDEBUG`` (default ``n``)
-
-  Enables debugging of the Queue and Buffer Manager layer which interacts
-  with the DPAA hardware.
-
 
 Environment Variables
 ~~~~~~~~~~~~~~~~~~~~~
@@ -265,7 +240,7 @@ for details.
 
    .. code-block:: console
 
-      ./arm64-dpaa-linux-gcc/testpmd -c 0xff -n 1 \
+      ./<build_dir>/app/dpdk-testpmd -c 0xff -n 1 \
         -- -i --portmask=0x3 --nb-cores=1 --no-flush-rx
 
       .....
@@ -322,7 +297,7 @@ FMC - FMAN Configuration Tool
 
 
    The details can be found in FMC Doc at:
-   `Frame Mnager Configuration Tool <https://www.nxp.com/docs/en/application-note/AN4760.pdf>`_.
+   `Frame Manager Configuration Tool <https://www.nxp.com/docs/en/application-note/AN4760.pdf>`_.
 
 FMLIB
 ~~~~~
@@ -332,7 +307,7 @@ FMLIB
 
    This is an alternate to the FMC based configuration. This library provides
    direct ioctl based interfaces for FMAN configuration as used by the FMC tool
-   as well. This helps in overcoming the main limitaiton of FMC - i.e. lack
+   as well. This helps in overcoming the main limitation of FMC - i.e. lack
    of dynamic configuration.
 
    The location for the fmd driver as used by FMLIB and FMC is as follows:
@@ -344,7 +319,7 @@ VSP (Virtual Storage Profile)
    The storage profiled are means to provide virtualized interface. A ranges of
    storage profiles cab be associated to Ethernet ports.
    They are selected during classification. Specify how the frame should be
-   written to memory and which buffer pool to select for packet storange in
+   written to memory and which buffer pool to select for packet storage in
    queues. Start and End margin of buffer can also be configured.
 
 Limitations
@@ -360,7 +335,7 @@ Maximum packet length
 ~~~~~~~~~~~~~~~~~~~~~
 
 The DPAA SoC family support a maximum of a 10240 jumbo frame. The value
-is fixed and cannot be changed. So, even when the ``rxmode.max_rx_pkt_len``
+is fixed and cannot be changed. So, even when the ``rxmode.mtu``
 member of ``struct rte_eth_conf`` is set to a value lower than 10240, frames
 up to 10240 bytes can still reach the host interface.