crypto/aesni_gcm: support CPU crypto

[dpdk.git] / doc / guides / nics / fm10k.rst

diff --git a/doc/guides/nics/fm10k.rst b/doc/guides/nics/fm10k.rst
index c44e226..4e178c2 100644 (file)
--- a/doc/guides/nics/fm10k.rst
+++ b/doc/guides/nics/fm10k.rst
@@ -79,14 +79,14 @@ Other features are supported using optional MACRO configuration. They include:
 
 To enable via ``RX_OLFLAGS`` use ``RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y``.
 
-To guarantee the constraint, the following configuration flags in ``dev_conf.rxmode``
+To guarantee the constraint, the following capabilities in ``dev_conf.rxmode.offloads``
 will be checked:
 
-*   ``hw_vlan_extend``
+*   ``DEV_RX_OFFLOAD_VLAN_EXTEND``
 
-*   ``hw_ip_checksum``
+*   ``DEV_RX_OFFLOAD_CHECKSUM``
 
-*   ``header_split``
+*   ``DEV_RX_OFFLOAD_HEADER_SPLIT``
 
 *   ``fdir_conf->mode``
 
@@ -106,19 +106,9 @@ TX Constraint
 Features not Supported by TX Vector PMD
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-TX vPMD only works when ``txq_flags`` is set to ``FM10K_SIMPLE_TX_FLAG``.
-This means that it does not support TX multi-segment, VLAN offload or TX csum
-offload. The following MACROs are used for these three features:
+TX vPMD only works when offloads is set to 0
 
-*   ``ETH_TXQ_FLAGS_NOMULTSEGS``
-
-*   ``ETH_TXQ_FLAGS_NOVLANOFFL``
-
-*   ``ETH_TXQ_FLAGS_NOXSUMSCTP``
-
-*   ``ETH_TXQ_FLAGS_NOXSUMUDP``
-
-*   ``ETH_TXQ_FLAGS_NOXSUMTCP``
+This means that it does not support any TX offload.
 
 Limitations
 -----------
@@ -129,7 +119,7 @@ Switch manager
 
 The Intel FM10000 family of NICs integrate a hardware switch and multiple host
 interfaces. The FM10000 PMD driver only manages host interfaces. For the
-switch component another switch driver has to be loaded prior to to the
+switch component another switch driver has to be loaded prior to the
 FM10000 PMD driver. The switch driver can be acquired from Intel support.
 Only Testpoint is validated with DPDK, the latest version that has been
 validated with DPDK is 4.1.6.
@@ -145,13 +135,11 @@ the Rx/Tx queues. When switch comes up, a LSC event indicating ``LINK_UP`` is
 sent to the app, which can then restart the FM10000 port to resume network
 processing.
 
-CRC striping
-~~~~~~~~~~~~
+CRC stripping
+~~~~~~~~~~~~~
 
 The FM10000 family of NICs strip the CRC for every packets coming into the
-host interface.  So, CRC will be stripped even when the
-``rxmode.hw_strip_crc`` member is set to 0 in ``struct rte_eth_conf``.
-
+host interface. So, keeping CRC is not supported.
 
 Maximum packet length
 ~~~~~~~~~~~~~~~~~~~~~