ethdev: remove name from extended statistic fetch

[dpdk.git] / doc / guides / nics / fm10k.rst

diff --git a/doc/guides/nics/fm10k.rst b/doc/guides/nics/fm10k.rst
index 25aff24..c4915d8 100644 (file)
--- a/doc/guides/nics/fm10k.rst
+++ b/doc/guides/nics/fm10k.rst
@@ -1,5 +1,5 @@
 ..  BSD LICENSE
-    Copyright(c) 2015 Intel Corporation. All rights reserved.
+    Copyright(c) 2015-2016 Intel Corporation. All rights reserved.
     All rights reserved.
 
     Redistribution and use in source and binary forms, with or without
@@ -34,6 +34,20 @@ FM10K Poll Mode Driver
 The FM10K poll mode driver library provides support for the Intel FM10000
 (FM10K) family of 40GbE/100GbE adapters.
 
+FTAG Based Forwarding of FM10K
+------------------------------
+
+FTAG Based Forwarding is a unique feature of FM10K. The FM10K family of NICs
+support the addition of a Fabric Tag (FTAG) to carry special information.
+The FTAG is placed at the beginning of the frame, it contains information
+such as where the packet comes from and goes, and the vlan tag. In FTAG based
+forwarding mode, the switch logic forwards packets according to glort (global
+resource tag) information, rather than the mac and vlan table. Currently this
+feature works only on PF.
+
+To enable this feature, the user should pass a devargs parameter to the eal
+like "-w 84:00.0,enable_ftag=1", and the application should make sure an
+appropriate FTAG is inserted for every frame on TX side.
 
 Vector PMD for FM10K
 --------------------
@@ -179,3 +193,11 @@ after approx 40 seconds. To ensure these overflows are detected and accounted
 for in the statistics, it is necessary to read statistic regularly. It is
 suggested to read stats every 20 seconds, which will ensure the statistics
 are accurate.
+
+
+Interrupt mode
+~~~~~~~~~~~~~~
+
+The FM10000 family of NICS need one separate interrupt for mailbox. So only
+drivers which support multiple interrupt vectors e.g. vfio-pci can work
+for fm10k interrupt mode.