net/igc: implement device base operations

[dpdk.git] / doc / guides / nics / i40e.rst

diff --git a/doc/guides/nics/i40e.rst b/doc/guides/nics/i40e.rst
index 2e9ec79..d6e578e 100644 (file)
--- a/doc/guides/nics/i40e.rst
+++ b/doc/guides/nics/i40e.rst
@@ -43,6 +43,7 @@ Features of the i40e PMD are:
 - Dynamic Device Personalization (DDP)
 - Queue region configuration
 - Virtual Function Port Representors
+- Malicious Device Drive event catch and notify
 
 Prerequisites
 -------------
@@ -58,6 +59,21 @@ Prerequisites
 - Upgrade the NVM/FW version following the `Intel® Ethernet NVM Update Tool Quick Usage Guide for Linux
   <https://www-ssl.intel.com/content/www/us/en/embedded/products/networking/nvm-update-tool-quick-linux-usage-guide.html>`_ and `Intel® Ethernet NVM Update Tool: Quick Usage Guide for EFI <https://www.intel.com/content/www/us/en/embedded/products/networking/nvm-update-tool-quick-efi-usage-guide.html>`_ if needed.
 
+- For information about supported media, please refer to this document: `Intel® Ethernet Controller X710/XXV710/XL710 Feature Support Matrix
+  <http://www.intel.com/content/dam/www/public/us/en/documents/release-notes/xl710-ethernet-controller-feature-matrix.pdf>`_.
+
+   .. Note::
+
+      * Some adapters based on the Intel(R) Ethernet Controller 700 Series only
+        support Intel Ethernet Optics modules. On these adapters, other modules are not
+        supported and will not function.
+
+      * For connections based on Intel(R) Ethernet Controller 700 Series,
+        support is dependent on your system board. Please see your vendor for details.
+
+      * In all cases Intel recommends using Intel Ethernet Optics; other modules
+        may function but are not validated by Intel. Contact Intel for supported media types.
+
 Recommended Matching List
 -------------------------
 
@@ -66,9 +82,19 @@ avoid the compatibility issues with i40e PMD. Here is the suggested matching
 list which has been tested and verified. The detailed information can refer
 to chapter Tested Platforms/Tested NICs in release notes.
 
+For X710/XL710/XXV710,
+
    +--------------+-----------------------+------------------+
    | DPDK version | Kernel driver version | Firmware version |
    +==============+=======================+==================+
+   |    20.02     |         2.10.19       |       7.20       |
+   +--------------+-----------------------+------------------+
+   |    19.11     |         2.9.21        |       7.00       |
+   +--------------+-----------------------+------------------+
+   |    19.08     |         2.8.43        |       7.00       |
+   +--------------+-----------------------+------------------+
+   |    19.05     |         2.7.29        |       6.80       |
+   +--------------+-----------------------+------------------+
    |    19.02     |         2.7.26        |       6.80       |
    +--------------+-----------------------+------------------+
    |    18.11     |         2.4.6         |       6.01       |
@@ -94,6 +120,26 @@ to chapter Tested Platforms/Tested NICs in release notes.
    |    16.04     |         1.4.25        |       5.02       |
    +--------------+-----------------------+------------------+
 
+
+For X722,
+
+   +--------------+-----------------------+------------------+
+   | DPDK version | Kernel driver version | Firmware version |
+   +==============+=======================+==================+
+   |    20.02     |         2.10.19       |       4.11       |
+   +--------------+-----------------------+------------------+
+   |    19.11     |         2.9.21        |       4.10       |
+   +--------------+-----------------------+------------------+
+   |    19.08     |         2.9.21        |       4.10       |
+   +--------------+-----------------------+------------------+
+   |    19.05     |         2.7.29        |       3.33       |
+   +--------------+-----------------------+------------------+
+   |    19.02     |         2.7.26        |       3.33       |
+   +--------------+-----------------------+------------------+
+   |    18.11     |         2.4.6         |       3.33       |
+   +--------------+-----------------------+------------------+
+
+
 Pre-Installation Configuration
 ------------------------------
 
@@ -181,6 +227,16 @@ Runtime Config Options
 
   -w 84:00.0,use-latest-supported-vec=1
 
+- ``Enable validation for VF message`` (default ``not enabled``)
+
+  The PF counts messages from each VF. If in any period of seconds the message
+  statistic from a VF exceeds maximal limitation, the PF will ignore any new message
+  from that VF for some seconds.
+  Format -- "maximal-message@period-seconds:ignore-seconds"
+  For example::
+
+  -w 84:00.0,vf_msg_cfg=80@120:180
+
 Vector RX Pre-conditions
 ~~~~~~~~~~~~~~~~~~~~~~~~
 For Vector RX it is assumed that the number of descriptor rings will be a power
@@ -443,7 +499,7 @@ which is used to configure hardware by downloading a profile to support
 protocols/filters which are not supported by default. The DDP
 functionality requires a NIC firmware version of 6.0 or greater.
 
-Current implementation supports GTP-C/GTP-U/PPPoE/PPPoL2TP,
+Current implementation supports GTP-C/GTP-U/PPPoE/PPPoL2TP/ESP,
 steering can be used with rte_flow API.
 
 GTPv1 package is released, and it can be downloaded from
@@ -452,6 +508,8 @@ https://downloadcenter.intel.com/download/27587.
 PPPoE package is released, and it can be downloaded from
 https://downloadcenter.intel.com/download/28040.
 
+ESP-AH package is not released yet.
+
 Load a profile which supports GTP and store backup profile:
 
 .. code-block:: console