doc: use corelist instead of coremask

[dpdk.git] / doc / guides / nics / ixgbe.rst

diff --git a/doc/guides/nics/ixgbe.rst b/doc/guides/nics/ixgbe.rst
index 05ecc2a..1a4aa48 100644 (file)
--- a/doc/guides/nics/ixgbe.rst
+++ b/doc/guides/nics/ixgbe.rst
@@ -163,13 +163,13 @@ By default, using CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y:
 
 .. code-block:: console
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 300 -n 4 -- -i --burst=32 --rxfreet=32 --mbcache=250 --txpt=32 --rxht=8 --rxwt=0 --txfreet=32 --txrst=32 --txqflags=0xf01
+    ./x86_64-native-linuxapp-gcc/app/testpmd -l 8-9 -n 4 -- -i --burst=32 --rxfreet=32 --mbcache=250 --txpt=32 --rxht=8 --rxwt=0 --txfreet=32 --txrst=32 --txqflags=0xf01
 
 When CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=n, better performance can be achieved:
 
 .. code-block:: console
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 300 -n 4 -- -i --burst=32 --rxfreet=32 --mbcache=250 --txpt=32 --rxht=8 --rxwt=0 --txfreet=32 --txrst=32 --txqflags=0xf01 --disable-hw-vlan
+    ./x86_64-native-linuxapp-gcc/app/testpmd -l 8-9 -n 4 -- -i --burst=32 --rxfreet=32 --mbcache=250 --txpt=32 --rxht=8 --rxwt=0 --txfreet=32 --txrst=32 --txqflags=0xf01 --disable-hw-vlan
 
 l3fwd
 ~~~~~
@@ -233,6 +233,15 @@ be calculated as follows:
 
 In order to ensure valid results, it is recommended to poll every 4 minutes.
 
+MTU setting
+~~~~~~~~~~~
+
+Although the user can set the MTU separately on PF and VF ports, the ixgbe NIC
+only supports one global MTU per physical port.
+So when the user sets different MTUs on PF and VF ports in one physical port,
+the real MTU for all these PF and VF ports is the largest value set.
+This behavior is based on the kernel driver behavior.
+
 
 Supported Chipsets and NICs
 ---------------------------