- Hardware LRO.
- Hairpin.
- Multiple-thread flow insertion.
+- Matching on IPv4 Internet Header Length (IHL).
- Matching on GTP extension header with raw encap/decap action.
- Matching on Geneve TLV option header with raw encap/decap action.
- RSS support in sample action.
- Flow integrity offload API.
- Connection tracking.
- Sub-Function representors.
+- Sub-Function.
+
Limitations
-----------
size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
inline settings) to 58.
-- Flows with a VXLAN Network Identifier equal (or ends to be equal)
- to 0 are not supported.
+- Match on VXLAN supports the following fields only:
+
+ - VNI
+ - Last reserved 8-bits
+
+ Last reserved 8-bits matching is only supported When using DV flow
+ engine (``dv_flow_en`` = 1).
+ For ConnectX-5, the UDP destination port must be the standard one (4789).
+ Group zero's behavior may differ which depends on FW.
+ Matching value equals 0 (value & mask) is not supported.
- L3 VXLAN and VXLAN-GPE tunnels cannot be supported together with MPLSoGRE and MPLSoUDP.
no MPRQ feature or vectorized code can be engaged.
- When Multi-Packet Rx queue is configured (``mprq_en``), a Rx packet can be
- externally attached to a user-provided mbuf with having EXT_ATTACHED_MBUF in
+ externally attached to a user-provided mbuf with having RTE_MBUF_F_EXTERNAL in
ol_flags. As the mempool for the external buffer is managed by PMD, all the
Rx mbufs must be freed before the device is closed. Otherwise, the mempool of
the external buffers will be freed by PMD and the application which still
- If Multi-Packet Rx queue is configured (``mprq_en``) and Rx CQE compression is
enabled (``rxq_cqe_comp_en``) at the same time, RSS hash result is not fully
- supported. Some Rx packets may not have PKT_RX_RSS_HASH.
+ supported. Some Rx packets may not have RTE_MBUF_F_RX_RSS_HASH.
- IPv6 Multicast messages are not supported on VM, while promiscuous mode
and allmulticast mode are both set to off.
- CRC:
- - ``DEV_RX_OFFLOAD_KEEP_CRC`` cannot be supported with decapsulation
+ - ``RTE_ETH_RX_OFFLOAD_KEEP_CRC`` cannot be supported with decapsulation
for some NICs (such as ConnectX-6 Dx, ConnectX-6 Lx, and BlueField-2).
The capability bit ``scatter_fcs_w_decap_disable`` shows NIC support.
- Meter:
- All the meter colors with drop action will be counted only by the global drop statistics.
- - Green color is not supported with drop action.
- - Yellow detection is not supported.
+ - Yellow detection is only supported with ASO metering.
- Red color must be with drop action.
- Meter statistics are supported only for drop case.
- - Meter yellow color detection is not supported.
- A meter action created with pre-defined policy must be the last action in the flow except single case where the policy actions are:
- green: NULL or END.
- yellow: NULL or END.
- RED: DROP / END.
- The only supported meter policy actions:
- - green: QUEUE, RSS, PORT_ID, JUMP, MARK and SET_TAG.
- - yellow: must be empty.
+ - green: QUEUE, RSS, PORT_ID, REPRESENTED_PORT, JUMP, DROP, MARK and SET_TAG.
+ - yellow: QUEUE, RSS, PORT_ID, REPRESENTED_PORT, JUMP, DROP, MARK and SET_TAG.
- RED: must be DROP.
+ - Policy actions of RSS for green and yellow should have the same configuration except queues.
- meter profile packet mode is supported.
+ - meter profiles of RFC2697, RFC2698 and RFC4115 are supported.
- Integrity:
- 256 ports maximum.
- 4M connections maximum.
+- Multi-thread flow insertion:
+
+ - In order to achieve best insertion rate, application should manage the flows per lcore.
+ - Better to disable memory reclaim by setting ``reclaim_mem_mode`` to 0 to accelerate the flow object allocation and release with cache.
+
+- HW hashed bonding
+
+ - TXQ affinity subjects to HW hash once enabled.
+
+- Bonding under socket direct mode
+
+ - Needs OFED 5.4+.
+
Statistics
----------
and each stride receives one packet. MPRQ can improve throughput for
small-packet traffic.
- When MPRQ is enabled, max_rx_pkt_len can be larger than the size of
- user-provided mbuf even if DEV_RX_OFFLOAD_SCATTER isn't enabled. PMD will
- configure large stride size enough to accommodate max_rx_pkt_len as long as
+ When MPRQ is enabled, MTU can be larger than the size of
+ user-provided mbuf even if RTE_ETH_RX_OFFLOAD_SCATTER isn't enabled. PMD will
+ configure large stride size enough to accommodate MTU as long as
device allows. Note that this can waste system memory compared to enabling Rx
scatter and multi-segment packet.
the mbuf by external buffer attachment - ``rte_pktmbuf_attach_extbuf()``.
A mempool for external buffers will be allocated and managed by PMD. If Rx
packet is externally attached, ol_flags field of the mbuf will have
- EXT_ATTACHED_MBUF and this flag must be preserved. ``RTE_MBUF_HAS_EXTBUF()``
+ RTE_MBUF_F_EXTERNAL and this flag must be preserved. ``RTE_MBUF_HAS_EXTBUF()``
checks the flag. The default value is 128, valid only if ``mprq_en`` is set.
- ``rxqs_min_mprq`` parameter [int]
Enabled by default.
+- ``mr_mempool_reg_en`` parameter [int]
+
+ A nonzero value enables implicit registration of DMA memory of all mempools
+ except those having ``RTE_MEMPOOL_F_NON_IO``. This flag is set automatically
+ for mempools populated with non-contiguous objects or those without IOVA.
+ The effect is that when a packet from a mempool is transmitted,
+ its memory is already registered for DMA in the PMD and no registration
+ will happen on the data path. The tradeoff is extra work on the creation
+ of each mempool and increased HW resource use if some mempools
+ are not used with MLX5 devices.
+
+ Enabled by default.
+
- ``representor`` parameter [list]
This parameter can be used to instantiate DPDK Ethernet devices from
echo -n "<device pci address" > /sys/bus/pci/drivers/mlx5_core/unbind
-5. Enbale switchdev mode::
+5. Enable switchdev mode::
echo switchdev > /sys/class/net/<net device>/compat/devlink/mode
-Sub-Function representor
-------------------------
+Sub-Function support
+--------------------
Sub-Function is a portion of the PCI device, a SF netdev has its own
-dedicated queues(txq, rxq). A SF netdev supports E-Switch representation
-offload similar to existing PF and VF representors. A SF shares PCI
-level resources with other SFs and/or with its parent PCI function.
+dedicated queues (txq, rxq).
+A SF shares PCI level resources with other SFs and/or with its parent PCI function.
+
+0. Requirement::
+
+ OFED version >= 5.4-0.3.3.0
1. Configure SF feature::
- mlxconfig -d <mst device> set PF_BAR2_SIZE=<0/1/2/3> PF_BAR2_ENABLE=1
+ # Run mlxconfig on both PFs on host and ECPFs on BlueField.
+ mlxconfig -d <mst device> set PER_PF_NUM_SF=1 PF_TOTAL_SF=252 PF_SF_BAR_SIZE=12
- Value of PF_BAR2_SIZE:
+2. Enable switchdev mode::
- 0: 8 SFs
- 1: 16 SFs
- 2: 32 SFs
- 3: 64 SFs
+ mlxdevm dev eswitch set pci/<DBDF> mode switchdev
-2. Reset the FW::
+3. Add SF port::
- mlxfwreset -d <mst device> reset
+ mlxdevm port add pci/<DBDF> flavour pcisf pfnum 0 sfnum <sfnum>
-3. Enable switchdev mode::
+ Get SFID from output: pci/<DBDF>/<SFID>
- echo switchdev > /sys/class/net/<net device>/compat/devlink/mode
+4. Modify MAC address::
+
+ mlxdevm port function set pci/<DBDF>/<SFID> hw_addr <MAC>
+
+5. Activate SF port::
-4. Create SF::
+ mlxdevm port function set pci/<DBDF>/<ID> state active
- mlnx-sf -d <PCI_BDF> -a create
+6. Devargs to probe SF device::
-5. Probe SF representor::
+ auxiliary:mlx5_core.sf.<num>,dv_flow_en=1
- testpmd> port attach <PCI_BDF>,representor=sf0,dv_flow_en=1
+Sub-Function representor support
+--------------------------------
+
+A SF netdev supports E-Switch representation offload
+similar to PF and VF representors.
+Use <sfnum> to probe SF representor::
+
+ testpmd> port attach <PCI_BDF>,representor=sf<sfnum>,dv_flow_en=1
Performance tuning
------------------
| | | rdma-core 26 | | rdma-core 26 |
| | | ConnectX-5 | | ConnectX-5 |
+-----------------------+-----------------+-----------------+
+ | ASO Metering | | DPDK 21.05 | | DPDK 21.05 |
+ | | | OFED 5.3 | | OFED 5.3 |
+ | | | rdma-core 33 | | rdma-core 33 |
+ | | | ConnectX-6 Dx| | ConnectX-6 Dx |
+ +-----------------------+-----------------+-----------------+
+ | Metering Hierarchy | | DPDK 21.08 | | DPDK 21.08 |
+ | | | OFED 5.3 | | OFED 5.3 |
+ | | | N/A | | N/A |
+ | | | ConnectX-6 Dx| | ConnectX-6 Dx |
+ +-----------------------+-----------------+-----------------+
| Sampling | | DPDK 20.11 | | DPDK 20.11 |
| | | OFED 5.1-2 | | OFED 5.1-2 |
| | | rdma-core 32 | | N/A |
git.droids-corp.org / dpdk.git / blobdiff