- Flow rules having a VLAN pop offload command as one of their actions and
are lacking a match on VLAN as one of their items are not supported.
- - The command is not supported on egress traffic.
+ - The command is not supported on egress traffic in NIC mode.
-- VLAN push offload is not supported on ingress traffic.
+- VLAN push offload is not supported on ingress traffic in NIC mode.
- VLAN set PCP offload is not supported on existing headers.
- Sample flow:
- - Supports ``RTE_FLOW_ACTION_TYPE_SAMPLE`` action only within NIC Rx and E-Switch steering domain.
- - The E-Switch Sample flow must have the eswitch_manager VPORT destination (PF or ECPF) and no additional actions.
- - For ConnectX-5, the ``RTE_FLOW_ACTION_TYPE_SAMPLE`` is typically used as first action in the E-Switch egress flow if with header modify or encapsulation actions.
+ - Supports ``RTE_FLOW_ACTION_TYPE_SAMPLE`` action only within NIC Rx and
+ E-Switch steering domain.
+ - For E-Switch Sampling flow with sample ratio > 1, additional actions are not
+ supported in the sample actions list.
+ - For ConnectX-5, the ``RTE_FLOW_ACTION_TYPE_SAMPLE`` is typically used as
+ first action in the E-Switch egress flow if with header modify or
+ encapsulation actions.
+ - For NIC Rx flow, supports ``MARK``, ``COUNT``, ``QUEUE``, ``RSS`` in the
+ sample actions list.
+ - For E-Switch mirroring flow, supports ``RAW ENCAP``, ``Port ID``,
+ ``VXLAN ENCAP``, ``NVGRE ENCAP`` in the sample actions list.
- Modify Field flow:
- Supports the 'set' operation only for ``RTE_FLOW_ACTION_TYPE_MODIFY_FIELD`` action.
- Modification of an arbitrary place in a packet via the special ``RTE_FLOW_FIELD_START`` Field ID is not supported.
+ - Modification of the 802.1Q Tag, VXLAN Network or GENEVE Network ID's is not supported.
- Encapsulation levels are not supported, can modify outermost header fields only.
- Offsets must be 32-bits aligned, cannot skip past the boundary of a field.
- ``representor`` parameter [list]
This parameter can be used to instantiate DPDK Ethernet devices from
- existing port (or VF) representors configured on the device.
+ existing port (PF, VF or SF) representors configured on the device.
It is a standard parameter whose format is described in
:ref:`ethernet_device_standard_device_arguments`.
- For instance, to probe port representors 0 through 2::
+ For instance, to probe VF port representors 0 through 2::
- representor=[0-2]
+ <PCI_BDF>,representor=vf[0-2]
+
+ To probe SF port representors 0 through 2::
+
+ <PCI_BDF>,representor=sf[0-2]
+
+ To probe VF port representors 0 through 2 on both PFs of bonding device::
+
+ <Primary_PCI_BDF>,representor=pf[0,1]vf[0-2]
- ``max_dump_files_num`` parameter [int]
Enable switchdev mode
---------------------
-Switchdev mode is a mode in E-Switch, that binds between representor and VF.
-Representor is a port in DPDK that is connected to a VF in such a way
-that assuming there are no offload flows, each packet that is sent from the VF
-will be received by the corresponding representor. While each packet that is
-sent to a representor will be received by the VF.
+Switchdev mode is a mode in E-Switch, that binds between representor and VF or SF.
+Representor is a port in DPDK that is connected to a VF or SF in such a way
+that assuming there are no offload flows, each packet that is sent from the VF or SF
+will be received by the corresponding representor. While each packet that is or SF
+sent to a representor will be received by the VF or SF.
This is very useful in case of SRIOV mode, where the first packet that is sent
-by the VF will be received by the DPDK application which will decide if this
+by the VF or SF will be received by the DPDK application which will decide if this
flow should be offloaded to the E-Switch. After offloading the flow packet
-that the VF that are matching the flow will not be received any more by
+that the VF or SF that are matching the flow will not be received any more by
the DPDK application.
1. Enable SRIOV mode::
echo switchdev > /sys/class/net/<net device>/compat/devlink/mode
+SubFunction representor support
+-------------------------------
+SubFunction is a portion of the PCI device, a SF netdev has its own
+dedicated queues(txq, rxq). A SF netdev supports E-Switch representation
+offload similar to existing PF and VF representors. A SF shares PCI
+level resources with other SFs and/or with its parent PCI function.
+
+1. Configure SF feature::
+
+ mlxconfig -d <mst device> set PF_BAR2_SIZE=<0/1/2/3> PF_BAR2_ENABLE=1
+
+ Value of PF_BAR2_SIZE:
+
+ 0: 8 SFs
+ 1: 16 SFs
+ 2: 32 SFs
+ 3: 64 SFs
+
+2. Reset the FW::
+
+ mlxfwreset -d <mst device> reset
+
+3. Enable switchdev mode::
+
+ echo switchdev > /sys/class/net/<net device>/compat/devlink/mode
+
+4. Create SF::
+
+ mlnx-sf -d <PCI_BDF> -a create
+
+5. Probe SF representor::
+
+ testpmd> port attach <PCI_BDF>,representor=sf0,dv_flow_en=1
+
Performance tuning
------------------
| | of_set_vlan_pcp / | | | | |
| | of_set_vlan_vid) | | | | |
+-----------------------+-----------------+-----------------+
+ | | VLAN | | DPDK 21.05 | | |
+ | | ingress and / | | OFED 5.3 | | N/A |
+ | | of_push_vlan / | | ConnectX-6 Dx | | |
+ +-----------------------+-----------------+-----------------+
+ | | VLAN | | DPDK 21.05 | | |
+ | | egress and / | | OFED 5.3 | | N/A |
+ | | of_pop_vlan / | | ConnectX-6 Dx | | |
+ +-----------------------+-----------------+-----------------+
| Encapsulation | | DPDK 19.05 | | DPDK 19.02 |
| (VXLAN / NVGRE / RAW) | | OFED 4.7-1 | | OFED 4.6 |
| | | rdma-core 24 | | rdma-core 23 |
.. code-block:: console
- testpmd> flow dump <port> <output_file>
+ To dump all flows:
+ testpmd> flow dump <port> all <output_file>
+ and dump one flow:
+ testpmd> flow dump <port> rule <rule_id> <output_file>
- call rte_flow_dev_dump api:
.. code-block:: console
- rte_flow_dev_dump(port, file, NULL);
+ rte_flow_dev_dump(port, flow, file, NULL);
#. Dump human-readable flows from raw file:
.. code-block:: console
- mlx_steering_dump.py -f <output_file>
+ mlx_steering_dump.py -f <output_file> -flowptr <flow_ptr>
git.droids-corp.org / dpdk.git / blobdiff