net/qede: add 50G device PCI id

[dpdk.git] / doc / guides / nics / mlx5.rst

diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 063c4a5..98d1341 100644 (file)
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -84,9 +84,11 @@ Features
 - Promiscuous mode.
 - Multicast promiscuous mode.
 - Hardware checksum offloads.
-- Flow director (RTE_FDIR_MODE_PERFECT and RTE_FDIR_MODE_PERFECT_MAC_VLAN).
+- Flow director (RTE_FDIR_MODE_PERFECT, RTE_FDIR_MODE_PERFECT_MAC_VLAN and
+  RTE_ETH_FDIR_REJECT).
 - Secondary process TX is supported.
 - KVM and VMware ESX SR-IOV modes are supported.
+- RSS hash result is supported.
 
 Limitations
 -----------
@@ -154,6 +156,11 @@ Run-time configuration
   allows to save PCI bandwidth and improve performance at the cost of a
   slightly higher CPU usage.  Enabled by default.
 
+  Supported on:
+
+  - x86_64 with ConnectX4 and ConnectX4 LX
+  - Power8 with ConnectX4 LX
+
 - ``txq_inline`` parameter [int]
 
   Amount of data to be inlined during TX operations. Improves latency.
@@ -234,12 +241,12 @@ DPDK and must be installed separately:
 
 Currently supported by DPDK:
 
-- Mellanox OFED **3.3-1.0.0.0**.
+- Mellanox OFED **3.4-1.0.0.0**.
 
-- Minimum firmware version:
+- firmware version:
 
-  - ConnectX-4: **12.16.1006**
-  - ConnectX-4 Lx: **14.16.1006**
+  - ConnectX-4: **12.17.1010**
+  - ConnectX-4 Lx: **14.17.1010**
 
 Getting Mellanox OFED
 ~~~~~~~~~~~~~~~~~~~~~