net/txgbe: reuse some PF Rx/Tx features for VF

[dpdk.git] / doc / guides / nics / octeontx2.rst

diff --git a/doc/guides/nics/octeontx2.rst b/doc/guides/nics/octeontx2.rst
index f3be79b..5e1621c 100644 (file)
--- a/doc/guides/nics/octeontx2.rst
+++ b/doc/guides/nics/octeontx2.rst
@@ -4,7 +4,7 @@
 OCTEON TX2 Poll Mode driver
 ===========================
 
-The OCTEON TX2 ETHDEV PMD (**librte_pmd_octeontx2**) provides poll mode ethdev
+The OCTEON TX2 ETHDEV PMD (**librte_net_octeontx2**) provides poll mode ethdev
 driver support for the inbuilt network device found in **Marvell OCTEON TX2**
 SoC family as well as for their virtual functions (VF) in SR-IOV context.
 
@@ -46,14 +46,6 @@ Prerequisites
 
 See :doc:`../platform/octeontx2` for setup information.
 
-Compile time Config Options
----------------------------
-
-The following options may be modified in the ``config`` file.
-
-- ``CONFIG_RTE_LIBRTE_OCTEONTX2_PMD`` (default ``y``)
-
-  Toggle compilation of the ``librte_pmd_octeontx2`` driver.
 
 Driver compilation and testing
 ------------------------------
@@ -61,9 +53,6 @@ Driver compilation and testing
 Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
 for details.
 
-To compile the OCTEON TX2 PMD for Linux arm64 gcc,
-use arm64-octeontx2-linux-gcc as target.
-
 #. Running testpmd:
 
    Follow instructions available in the document
@@ -74,7 +63,7 @@ use arm64-octeontx2-linux-gcc as target.
 
    .. code-block:: console
 
-      ./build/app/testpmd -c 0x300 -w 0002:02:00.0 -- --portmask=0x1 --nb-cores=1 --port-topology=loop --rxq=1 --txq=1
+      ./<build_dir>/app/dpdk-testpmd -c 0x300 -a 0002:02:00.0 -- --portmask=0x1 --nb-cores=1 --port-topology=loop --rxq=1 --txq=1
       EAL: Detected 24 lcore(s)
       EAL: Detected 1 NUMA nodes
       EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
@@ -127,7 +116,7 @@ Runtime Config Options
 
    For example::
 
-      -w 0002:02:00.0,reta_size=256
+      -a 0002:02:00.0,reta_size=256
 
    With the above configuration, reta table of size 256 is populated.
 
@@ -138,7 +127,7 @@ Runtime Config Options
 
    For example::
 
-      -w 0002:02:00.0,flow_max_priority=10
+      -a 0002:02:00.0,flow_max_priority=10
 
    With the above configuration, priority level was set to 10 (0-9). Max
    priority level supported is 32.
@@ -150,7 +139,7 @@ Runtime Config Options
 
    For example::
 
-      -w 0002:02:00.0,flow_prealloc_size=4
+      -a 0002:02:00.0,flow_prealloc_size=4
 
    With the above configuration, pre alloc size was set to 4. Max pre alloc
    size supported is 32.
@@ -162,7 +151,7 @@ Runtime Config Options
 
    For example::
 
-      -w 0002:02:00.0,max_sqb_count=64
+      -a 0002:02:00.0,max_sqb_count=64
 
    With the above configuration, each send queue's decscriptor buffer count is
    limited to a maximum of 64 buffers.
@@ -174,11 +163,11 @@ Runtime Config Options
 
    For example::
 
-      -w 0002:02:00.0,switch_header="higig2"
+      -a 0002:02:00.0,switch_header="higig2"
 
    With the above configuration, higig2 will be enabled on that port and the
    traffic on this port should be higig2 traffic only. Supported switch header
-   types are "higig2", "dsa" and "chlen90b".
+   types are "higig2", "dsa", "chlen90b" and "chlen24b".
 
 - ``RSS tag as XOR`` (default ``0``)
 
@@ -196,7 +185,7 @@ Runtime Config Options
 
    For example to select the legacy mode(RSS tag adder as XOR)::
 
-      -w 0002:02:00.0,tag_as_xor=1
+      -a 0002:02:00.0,tag_as_xor=1
 
 - ``Max SPI for inbound inline IPsec`` (default ``1``)
 
@@ -205,7 +194,7 @@ Runtime Config Options
 
    For example::
 
-      -w 0002:02:00.0,ipsec_in_max_spi=128
+      -a 0002:02:00.0,ipsec_in_max_spi=128
 
    With the above configuration, application can enable inline IPsec processing
    on 128 SAs (SPI 0-127).
@@ -216,7 +205,7 @@ Runtime Config Options
 
    For example::
 
-      -w 0002:02:00.0,lock_rx_ctx=1
+      -a 0002:02:00.0,lock_rx_ctx=1
 
 - ``Lock Tx contexts in NDC cache``
 
@@ -224,7 +213,7 @@ Runtime Config Options
 
    For example::
 
-      -w 0002:02:00.0,lock_tx_ctx=1
+      -a 0002:02:00.0,lock_tx_ctx=1
 
 .. note::
 
@@ -240,7 +229,7 @@ Runtime Config Options
 
    For example::
 
-      -w 0002:02:00.0,npa_lock_mask=0xf
+      -a 0002:02:00.0,npa_lock_mask=0xf
 
 .. _otx2_tmapi: