- Receiver Side Scaling (RSS)
- MAC/VLAN filtering
- Generic flow API
+- Inner and Outer Checksum offload
- VLAN/QinQ stripping and insertion
- Port hardware statistics
- Link state information
- Link flow control
+- MTU update
- Scatter-Gather IO support
- Vector Poll mode driver
- Debug utilities - Context dump and error interrupt support
- IEEE1588 timestamping
+- HW offloaded `ethdev Rx queue` to `eventdev event queue` packet injection
+- Support Rx interrupt
Prerequisites
-------------
Toggle compilation of the ``librte_pmd_octeontx2`` driver.
+Driver compilation and testing
+------------------------------
+
+Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+for details.
+
+To compile the OCTEON TX2 PMD for Linux arm64 gcc,
+use arm64-octeontx2-linux-gcc as target.
+
+#. Running testpmd:
+
+ Follow instructions available in the document
+ :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+ to run testpmd.
+
+ Example output:
+
+ .. code-block:: console
+
+ ./build/app/testpmd -c 0x300 -w 0002:02:00.0 -- --portmask=0x1 --nb-cores=1 --port-topology=loop --rxq=1 --txq=1
+ EAL: Detected 24 lcore(s)
+ EAL: Detected 1 NUMA nodes
+ EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
+ EAL: No available hugepages reported in hugepages-2048kB
+ EAL: Probing VFIO support...
+ EAL: VFIO support initialized
+ EAL: PCI device 0002:02:00.0 on NUMA socket 0
+ EAL: probe driver: 177d:a063 net_octeontx2
+ EAL: using IOMMU type 1 (Type 1)
+ testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=267456, size=2176, socket=0
+ testpmd: preferred mempool ops selected: octeontx2_npa
+ Configuring Port 0 (socket 0)
+ PMD: Port 0: Link Up - speed 40000 Mbps - full-duplex
+
+ Port 0: link state change event
+ Port 0: 36:10:66:88:7A:57
+ Checking link statuses...
+ Done
+ No commandline core given, start packet forwarding
+ io packet forwarding - ports=1 - cores=1 - streams=1 - NUMA support enabled, MP allocation mode: native
+ Logical Core 9 (socket 0) forwards packets on 1 streams:
+ RX P=0/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
+
+ io packet forwarding packets/burst=32
+ nb forwarding cores=1 - nb forwarding ports=1
+ port 0: RX queue number: 1 Tx queue number: 1
+ Rx offloads=0x0 Tx offloads=0x10000
+ RX queue: 0
+ RX desc=512 - RX free threshold=0
+ RX threshold registers: pthresh=0 hthresh=0 wthresh=0
+ RX Offloads=0x0
+ TX queue: 0
+ TX desc=512 - TX free threshold=0
+ TX threshold registers: pthresh=0 hthresh=0 wthresh=0
+ TX offloads=0x10000 - TX RS bit threshold=0
+ Press enter to exit
+
Runtime Config Options
----------------------
parameters to all the PCIe devices if application requires to configure on
all the ethdev ports.
+Limitations
+-----------
+
+``mempool_octeontx2`` external mempool handler dependency
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The OCTEON TX2 SoC family NIC has inbuilt HW assisted external mempool manager.
+``net_octeontx2`` pmd only works with ``mempool_octeontx2`` mempool handler
+as it is performance wise most effective way for packet allocation and Tx buffer
+recycling on OCTEON TX2 SoC platform.
+
+CRC striping
+~~~~~~~~~~~~
+
+The OCTEON TX2 SoC family NICs strip the CRC for every packet being received by
+the host interface irrespective of the offload configuration.
+
+
+Debugging Options
+-----------------
+
+.. _table_octeontx2_ethdev_debug_options:
+
+.. table:: OCTEON TX2 ethdev debug options
+
+ +---+------------+-------------------------------------------------------+
+ | # | Component | EAL log command |
+ +===+============+=======================================================+
+ | 1 | NIX | --log-level='pmd\.net.octeontx2,8' |
+ +---+------------+-------------------------------------------------------+
+ | 2 | NPC | --log-level='pmd\.net.octeontx2\.flow,8' |
+ +---+------------+-------------------------------------------------------+
+
RTE Flow Support
----------------
+----+--------------------------------+
| 19 | RTE_FLOW_ITEM_TYPE_VXLAN_GPE |
+----+--------------------------------+
- | 20 | RTE_FLOW_ITEM_TYPE_VOID |
+ | 20 | RTE_FLOW_ITEM_TYPE_IPV6_EXT |
+ +----+--------------------------------+
+ | 21 | RTE_FLOW_ITEM_TYPE_VOID |
+----+--------------------------------+
- | 21 | RTE_FLOW_ITEM_TYPE_ANY |
+ | 22 | RTE_FLOW_ITEM_TYPE_ANY |
+ +----+--------------------------------+
+ | 23 | RTE_FLOW_ITEM_TYPE_GRE_KEY |
+----+--------------------------------+
+.. note::
+
+ ``RTE_FLOW_ITEM_TYPE_GRE_KEY`` works only when checksum and routing
+ bits in the GRE header are equal to 0.
+
Actions:
.. _table_octeontx2_supported_ingress_action_types:
+----+--------------------------------+
| 8 | RTE_FLOW_ACTION_TYPE_SECURITY |
+----+--------------------------------+
+ | 9 | RTE_FLOW_ACTION_TYPE_PF |
+ +----+--------------------------------+
+ | 10 | RTE_FLOW_ACTION_TYPE_VF |
+ +----+--------------------------------+
.. _table_octeontx2_supported_egress_action_types:
git.droids-corp.org / dpdk.git / blobdiff