doc: improve lstopo tip

[dpdk.git] / doc / guides / nics / qede.rst

diff --git a/doc/guides/nics/qede.rst b/doc/guides/nics/qede.rst
index da9af95..2396509 100644 (file)
--- a/doc/guides/nics/qede.rst
+++ b/doc/guides/nics/qede.rst
@@ -5,7 +5,7 @@
 QEDE Poll Mode Driver
 ======================
 
-The QEDE poll mode driver library (**librte_pmd_qede**) implements support
+The QEDE poll mode driver library (**librte_net_qede**) implements support
 for **QLogic FastLinQ QL4xxxx 10G/25G/40G/50G/100G Intelligent Ethernet Adapters (IEA) and Converged Network Adapters (CNA)** family of adapters as well as SR-IOV virtual functions (VF). It is supported on
 several standard Linux distros like RHEL, SLES, Ubuntu etc.
 It is compile-tested under FreeBSD OS.
@@ -190,7 +190,7 @@ SR-IOV: Prerequisites and Sample Application Notes
 
 This section provides instructions to configure SR-IOV with Linux OS.
 
-**Note**: librte_pmd_qede will be used to bind to SR-IOV VF device and Linux native kernel driver (qede) will function as SR-IOV PF driver. Requires PF driver to be 8.20.x.x or higher.
+**Note**: librte_net_qede will be used to bind to SR-IOV VF device and Linux native kernel driver (qede) will function as SR-IOV PF driver. Requires PF driver to be 8.20.x.x or higher.
 
 #. Verify SR-IOV and ARI capability is enabled on the adapter using ``lspci``:
 
@@ -272,7 +272,7 @@ This section provides instructions to configure SR-IOV with Linux OS.
 
    .. code-block:: console
 
-      testpmd -l 0,4-11 -n 4 -- -i --nb-cores=8 --portmask=0xf --rxd=4096 \
+      dpdk-testpmd -l 0,4-11 -n 4 -- -i --nb-cores=8 --portmask=0xf --rxd=4096 \
       --txd=4096 --txfreet=4068 --enable-rx-cksum --rxq=4 --txq=4 \
       --rss-ip --rss-udp