net/mlx5: support connection tracking between two ports

[dpdk.git] / doc / guides / nics / qede.rst

diff --git a/doc/guides/nics/qede.rst b/doc/guides/nics/qede.rst
index e874915..2396509 100644 (file)
--- a/doc/guides/nics/qede.rst
+++ b/doc/guides/nics/qede.rst
@@ -5,7 +5,7 @@
 QEDE Poll Mode Driver
 ======================
 
-The QEDE poll mode driver library (**librte_pmd_qede**) implements support
+The QEDE poll mode driver library (**librte_net_qede**) implements support
 for **QLogic FastLinQ QL4xxxx 10G/25G/40G/50G/100G Intelligent Ethernet Adapters (IEA) and Converged Network Adapters (CNA)** family of adapters as well as SR-IOV virtual functions (VF). It is supported on
 several standard Linux distros like RHEL, SLES, Ubuntu etc.
 It is compile-tested under FreeBSD OS.
@@ -103,25 +103,12 @@ Performance note
 
 - For better performance, it is recommended to use 4K or higher RX/TX rings.
 
-Config File Options
-~~~~~~~~~~~~~~~~~~~
+Config Options
+~~~~~~~~~~~~~~
 
-The following options can be modified in the ``.config`` file. Please note that
-enabling debugging options may affect system performance.
+The following option can be modified in the ``config/rte_config.h`` file.
 
-- ``CONFIG_RTE_LIBRTE_QEDE_PMD`` (default **y**)
-
-  Toggle compilation of QEDE PMD driver.
-
-- ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX`` (default **n**)
-
-  Toggle display of transmit fast path run-time messages.
-
-- ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX`` (default **n**)
-
-  Toggle display of receive fast path run-time messages.
-
-- ``CONFIG_RTE_LIBRTE_QEDE_FW`` (default **""**)
+- ``RTE_LIBRTE_QEDE_FW`` (default **""**)
 
   Gives absolute path of firmware file.
   ``Eg: "/lib/firmware/qed/qed_init_values-8.40.33.0.bin"``
@@ -130,6 +117,16 @@ enabling debugging options may affect system performance.
   CAUTION this option is more for custom firmware, it is not
   recommended for use under normal condition.
 
+The following options can be enabled with Meson flags.
+
+- ``RTE_LIBRTE_QEDE_DEBUG_TX`` (default **disabled**)
+
+  Toggle display of transmit fast path run-time messages.
+
+- ``RTE_LIBRTE_QEDE_DEBUG_RX`` (default **disabled**)
+
+  Toggle display of receive fast path run-time messages.
+
 Config notes
 ~~~~~~~~~~~~
 
@@ -193,7 +190,7 @@ SR-IOV: Prerequisites and Sample Application Notes
 
 This section provides instructions to configure SR-IOV with Linux OS.
 
-**Note**: librte_pmd_qede will be used to bind to SR-IOV VF device and Linux native kernel driver (qede) will function as SR-IOV PF driver. Requires PF driver to be 8.20.x.x or higher.
+**Note**: librte_net_qede will be used to bind to SR-IOV VF device and Linux native kernel driver (qede) will function as SR-IOV PF driver. Requires PF driver to be 8.20.x.x or higher.
 
 #. Verify SR-IOV and ARI capability is enabled on the adapter using ``lspci``:
 
@@ -275,7 +272,7 @@ This section provides instructions to configure SR-IOV with Linux OS.
 
    .. code-block:: console
 
-      testpmd -l 0,4-11 -n 4 -- -i --nb-cores=8 --portmask=0xf --rxd=4096 \
+      dpdk-testpmd -l 0,4-11 -n 4 -- -i --nb-cores=8 --portmask=0xf --rxd=4096 \
       --txd=4096 --txfreet=4068 --enable-rx-cksum --rxq=4 --txq=4 \
       --rss-ip --rss-udp