tools: move to usertools

[dpdk.git] / doc / guides / nics / qede.rst

diff --git a/doc/guides/nics/qede.rst b/doc/guides/nics/qede.rst
index e19c3db..9d70217 100644 (file)
--- a/doc/guides/nics/qede.rst
+++ b/doc/guides/nics/qede.rst
@@ -47,7 +47,7 @@ Supported Features
 - Promiscuous mode
 - Allmulti mode
 - Port hardware statistics
-- Jumbo frames (using single buffer)
+- Jumbo frames
 - VLAN offload - Filtering and stripping
 - Stateless checksum offloads (IPv4/TCP/UDP)
 - Multiple Rx/Tx queues
@@ -58,19 +58,20 @@ Supported Features
 - SR-IOV VF
 - MTU change
 - Multiprocess aware
+- Scatter-Gather
 
 Non-supported Features
 ----------------------
 
-- Scatter-Gather Rx/Tx frames
 - SR-IOV PF
 - Tunneling offloads
-- Reload of the PMD after a non-graceful termination
+- LRO/TSO
+- NPAR
 
 Supported QLogic Adapters
 -------------------------
 
-- QLogic FastLinQ QL4xxxx 25G/40G/100G CNAs.
+- QLogic FastLinQ QL4xxxx 10G/25G/40G/100G CNAs.
 
 Prerequisites
 -------------
@@ -78,14 +79,11 @@ Prerequisites
 - Requires firmware version **8.10.x.** and management firmware
   version **8.10.x or higher**. Firmware may be available
   inbox in certain newer Linux distros under the standard directory
-  ``E.g. /lib/firmware/qed/qed_init_values_zipped-8.10.9.0.bin``
+  ``E.g. /lib/firmware/qed/qed_init_values-8.10.9.0.bin``
 
 - If the required firmware files are not available then visit
   `QLogic Driver Download Center <http://driverdownloads.qlogic.com>`_.
 
-- This driver relies on external zlib library (-lz) for uncompressing
-  the firmware file.
-
 Performance note
 ~~~~~~~~~~~~~~~~
 
@@ -177,7 +175,7 @@ devices managed by ``librte_pmd_qede`` in Linux operating system.
 
    .. code-block:: console
 
-      ./tools/dpdk-devbind.py --bind igb_uio 0000:84:00.0 0000:84:00.1 \
+      ./usertools/dpdk-devbind.py --bind igb_uio 0000:84:00.0 0000:84:00.1 \
                                               0000:84:00.2 0000:84:00.3
 
 #. Start ``testpmd`` with basic parameters:
@@ -243,7 +241,7 @@ SR-IOV: Prerequisites and Sample Application Notes
 
 This section provides instructions to configure SR-IOV with Linux OS.
 
-**Note**: librte_pmd_qede will be used to bind to SR-IOV VF device and Linux native kernel driver (QEDE) will function as SR-IOV PF driver.
+**Note**: librte_pmd_qede will be used to bind to SR-IOV VF device and Linux native kernel driver (QEDE) will function as SR-IOV PF driver. Requires PF driver to be 8.10.x.x or higher.
 
 #. Verify SR-IOV and ARI capability is enabled on the adapter using ``lspci``: