- MTU change
- Multiprocess aware
- Scatter-Gather
+- VXLAN tunneling offload
Non-supported Features
----------------------
- SR-IOV PF
-- Tunneling offloads
-- Reload of the PMD after a non-graceful termination
+- GENEVE and NVGRE Tunneling offloads
+- LRO/TSO
+- NPAR
Supported QLogic Adapters
-------------------------
-- QLogic FastLinQ QL4xxxx 25G/40G/100G CNAs.
+- QLogic FastLinQ QL4xxxx 10G/25G/40G/100G CNAs.
Prerequisites
-------------
- Requires firmware version **8.10.x.** and management firmware
version **8.10.x or higher**. Firmware may be available
inbox in certain newer Linux distros under the standard directory
- ``E.g. /lib/firmware/qed/qed_init_values_zipped-8.10.9.0.bin``
+ ``E.g. /lib/firmware/qed/qed_init_values-8.10.9.0.bin``
- If the required firmware files are not available then visit
`QLogic Driver Download Center <http://driverdownloads.qlogic.com>`_.
-- This driver relies on external zlib library (-lz) for uncompressing
- the firmware file.
-
Performance note
~~~~~~~~~~~~~~~~
.. code-block:: console
- ./tools/dpdk-devbind.py --bind igb_uio 0000:84:00.0 0000:84:00.1 \
+ ./usertools/dpdk-devbind.py --bind igb_uio 0000:84:00.0 0000:84:00.1 \
0000:84:00.2 0000:84:00.3
#. Start ``testpmd`` with basic parameters:
This section provides instructions to configure SR-IOV with Linux OS.
-**Note**: librte_pmd_qede will be used to bind to SR-IOV VF device and Linux native kernel driver (QEDE) will function as SR-IOV PF driver.
+**Note**: librte_pmd_qede will be used to bind to SR-IOV VF device and Linux native kernel driver (QEDE) will function as SR-IOV PF driver. Requires PF driver to be 8.10.x.x or higher.
#. Verify SR-IOV and ARI capability is enabled on the adapter using ``lspci``: